Could not load c:\WINDOWS\system32\npDeployJava1.dll
verify java version page verified that current version (21) had been installed, but through the above error. Do I need to do anything? What's this about?
than,s
I hope there is another computer around using the same version of windows 7. You need to create a repair disc. Then you need to run a startup repair.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com
Similar Messages
-
Windows failed to start. Could not load file Windows\System32\winload.exe
My friend tried to recover his laptop by using the recover button u can do from (controlpanel) and systems. It failed and when I try to start his laptop it says the typically Windows failed to start, \Windows\system32\winload.exe. Status:0xc000000f.
If it was my own laptop and if it was a desktop I would just make a clean installation. Delete all partitions and install new windows. But his laptop got these ones........
disk 0 partition 1 200 mb system
disk 0 partition 2 227,7gb all free, primary
disk0 unallocated space 194 gb all free
disk 0 partition 3: lenovo 29gb 8mb free, LOGICAL
disk 0 partition 4:LENOVO_PART 14 gb 3.3free OEM (reserved)
Im afraid he got 2 harddrives a hdd and a sdd for windows. Im not sure and this looks like **bleep** to my eyes.
So if I could prevent deleting all partions and do a normal recovery it would be great.
SO I found this and I dont know if its what I should do. coderforlife
But when I type the things in command it doesnt work.
SO guys what should I do? DOnt wanna destroy his laptop cause he needs to use it at saturday.
Best regards Niklas
Btw im not sure if the thread is in the right place. Let me know
Solved!
Go to Solution.I hope there is another computer around using the same version of windows 7. You need to create a repair disc. Then you need to run a startup repair.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com -
Could not load file or assembly crdb_adoplus.dll
Hello everyone!..
I am having a really annoying problem, in my code when I try to set de data source to the report the following error appears:
Could not load file or assembly 'file:///C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified.
I am running .NET Framework 4 running in VS2012 to X86 and I have installed the CRforVS_13_0_8, although just in case I installed all the version from the CRforVS_13_0_5 to the CRforVS_13_0_8.
Also I have found in many sites that adding the following lines to the app.config seems to fix the problem, but in my case doesn't work:
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
Part of my code is this, just in case:
using (ReportDocument report = new ReportDocument())
try
// carga el reporte desde su ubicación configurada
report.Load(pathReporte);
report.SetDataSource(data);
and the dlls I have referenced are this ones:
CrystalDecisions.CrystalReports.Engine
CrystalDecisions.ReportSource
CrystalDecisions.Shared
Thanks very much for your help in advance.Hi Javier
Two things to do:
1) Read this blog re. troubleshooting issues with CR and datasets (the error is different, but try anyhow)
2) Use Process Monitor and see what is happening when your process is attempting to load the crdb_adoplus.dll
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
C:\Windows\SysWOW64\vidperf.dll The path could not be found? What does this mean? How do I re-install this packet and eliminate this error message?
Dell Laptop inspiron 1525 with Windows 7 Premium with open rights.P
Just to eliminate the possibility please run Malwarebytes
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag -
Error Code: -17004, Could not load DLL or library
Hi All,
I am getting the following error message:
Error loading step 'x' of sequence 'MainSequence' in file 'y'. Could not load DLL or external library C:\bin\driver.dll
Error Code: -17004, Could not load DLL or library.
Source 'TSAPI"
My main DLL is one written in C in LabWindows. This DLL calls a second DLL that was written in Visual C++
I am using TestStand 2010 SP1 as well as CVI/LabWindows 2010. I have WinXP Professioanl SP3.
This same sequence, DLL1, and DLL2 have worked together in previous versions of TestStand!!!! All I did was upgrade to Developer Suite 2011.......??????
I have reviewed all the posts regarding this problem and have so far done the following:
1. Verified Both DLL1 and DLL2 reside in the same directory
2. Copied DLL2 into C:\Windows\system32
3. Used Dependency Walker to verify that there are no other missing DLL's
4. Unistalled Explorer 8 and installed Explorer 7 because of somthing I saw in depends and something I read while researching this problem.
5. Verified the Search Directories in TestStand
I am wits end, as I cannot determine what the problem is and any suggestions would be welcome
Solved!
Go to Solution.So I did come up with a solution to this problem, but I don't understand why it solves the issue. Hopefully some of you can provide some insight.
So all my sequences were experiencing the problem described, and all sequences basically call the same dll's over and over.
I have a dll that I use as my "main" dll. All my sequences use this dll and I continually add more functions as our company designes new products, etc. This dll uses functions that are from my CommDll. The CommDll was written in C++, and it is also used in several other dll's that my sequence call's as I use it for all serial/telnet requirements.
So my test sequences for example calls the following dll's usually in this particular order ---
DbDriver - This dll handles all the database functioanality for our products, and calls libMysql.dll
PwrController.dll - this dll controls a pwrcontroller for all power on/power off, reboot, etc of our product. This dll calls the CommDll.
CompanyDll - This is the "main" dll that hadles all the cli commands and other test functions that our product requires. This also calls CommDll.
When the sequence calls are done in the order above, it does not work.. However, if I switch the sequence file to call the CompanyDll before the PwrController.dll everything works fine. Is there an order of operations here????
I also found that when I compiled my PwrController.dll with CVI 2010, it gave me an error could not load PwrController.dll no matter what order the seqence calls were, leading me to believe that I am missing something when building this particular dll. As soon as I copy the original, developed and compiled in 2006, everything works again.
Thanks,
greggj -
Could not load file or assembly 'Oracle.DataAccess' Windows Vista x64
Ok now here is the funny part, this works fine when i'm developing ASP.NET applications ( i assume that is puts the dev web server into x86 mode), but when im trying to use Oracle.DataAccess DLL in a console application i get a '+Additional information: Could not load file or assembly 'Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.+' error in visual studio when i try and debug and also when i try and run the console app.
Using the latest ODP.NET 11.1.0.6.20, Windows Vista x64 SP1 (all updates installed), Visual Studio 2008 SP1never mind, figured it out, the Platform target in studio was on "Auto" and was defaulting to x64....
-
This morning came in to find clients were not getting there bootfiles through PXE. I checked the logs to find the following events related to WDS.
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Has anyone seen this or have a link to a resolution?
tconnersHotfix loaded but didn't help.
Found a few articles referring to rebuilding the perf counter library. I ran "lodctr /R" failed first time then worked the second time. I believe the errors:
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Are gone but PXE boot still fails.
Do you think I might have to uninstall WDS and reinstall? "Using SCCM console to just remove PXE"
tconners -
Could not load assembly or file "crystaldecisions.windows.forms"
Hi,
I have a VS2005 C# .net application which works fine when I run on the programming machine.
Now , I copy all files (dll , pdb , exe) from the Project's "..bin\Debug " directory .
These files I transfer to another computer which does not have VS 2005 .NET installed (or any separate crystal reports program), but it does have .netframework 1 and 2, so that I can test the application on that "test" computer.
When I double click the .exe , I log in and then I click a menu item which shows a form which has a crystalreport viewer in it.Here , an unhandled excepion error is shown like this...
Could not load assembly or file "crystaldecisions.windows.forms" version 10.2.3600.0
Note please: I have not created an installer(.msi) package for our application yet.
The application does not refer to any crystal reports dlls in it's directory
Thanks -Hello Dimitar,
If Crystal Reports is not properly integrated into your VS IDE you'll usually see that kind of message.
You have to make sure that Crystal Reports is properly integrated into Visual Studios. Do you have a full version of Crystal Reports installed on your Visual Studios .NET 2005 development machine? If so, what is the version of Crystal Reports? Open Crystal Reports, go to the Help menu, and then About Crystal Reports. What is the version number and name (listed near the top)?
Now open Visual Studios and go to Help > About VS. In the list of Installed Products what does it say for Crystal (usually near the bottom of the list). Please DO NOT include your keycode - just what it says for Crystal.
Sincerely,
Dan Kelleher -
Hi there,
I installed ColdfusionMX 7 on WIndows 2008 R2 Standard server. When I try to open the admin page , I Get the error:
Server Error in '/' Application.
Could not load type 'C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll'.
Description:
An unhandled exception occurred during the execution of t@he current
web request. Please review the stack trace for more information about
the error and where it originated in the code.
Exception Details: System.Web.HttpException: Could not load type 'C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Could not load type 'C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll'.]
System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +8926577
System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type) +21
System.Web.Configuration.HandlerFactoryCache..ctor(String type) +19
System.Web.HttpApplication.GetFactory(String type) +78
System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Exec ute() +229
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5483
Any idea what is causing this problem and how to fix it.
Thanks
Joe GreenI gave IIS AppPool\DefaultAppPool NTFS permissions to C:\CFusionMX7\runtime\lib\wsconfig\ folder. Under IIS 6 Management Compatibility, I installed IIS 6 Metabase Compatibility and IIS 6 Management Console installed. Web Server Configuration tool doesn't work because my IIS version is 7.5 and Supported versions are 4, 5 and 6. So I manually added using this article http://www.adobe.com/devnet/coldfusion/articles/iis-configuration.html but no luck.
I didn't add IIS 6 WMI Compatibility and IIS 6 Scripting Tools.
Is it because CF7 doesn't work on IIS 7.5 on Win 2008 R2 SP1? -
Itc_plugin.dll could not load in 64-bit mode after installing iTunes 12.01
Hi,
I just updated iTunes on my Windows 8.1 Samsung Laptop to the most recent version, iTunes 12.01. Since then it's showing the following message when it starts:
"itc_plugin.dll could not load in 64-bit mode"
and a checkbox for "don't show this message again'
I don't know if this itc_plugin.dll is even important, it seems to work fine. Should I be worried? I already reinstalled iTunes to see if it were an installation problem but the error still shows.The .dll file could be a legacy from an older version of iTunes or third party software. I don't have a copy, neither can I track down any information about it. You might want to locate it and remove it from the iTunes plugins folder or click "Don't show this message again".
tt2 -
Jre 6 update 20 on 64-bit Windows 7 - Could not load the Java Virtual Machi
Hi,
I download and installed jre 6 update 20 (64-bit) on Windows 7 (64-bit).
I ran a 3rd party Java application and I got the error saying 'Could not load the Java Virtual Machine.'.
I found that the jvm.dll is installed under c:\Program Files\Java\jre6\bin\servere folder.
I checked the registry and the JVM is pointing to c:\Program Files\Java\jre6\bin\client folder.
May questions are:
1) Why does the registry point to the clinet folder instead of server folder?
2) Should I change my registry entry to point to the server folder to fix my error - Could not load the Java Virtual Machine?
3) Is there a better way to fix the issue besides chaning the regiatry?
Thanks.Hi Igor,
I don't have proxy, neither vpn. Everything works with Java 1.6 with the same Java settings.
I tested the jnlps also with janela and the syntax seems OK.
What kind of test you mean?
I wrote this kin of code and this works also:
<pre>
try {
URL url = new URL("http://argouml-downloads.tigris.org/jws/argouml-latest-stable.jnlp");
URLConnection con = url.openConnection();
con.setDoInput(true);
con.setDoOutput(true);
con.getOutputStream();
con.getInputStream();
Logger.getLogger(App.class.getName()).log(Level.INFO,"OK");
} catch (MalformedURLException ex) {
Logger.getLogger(App.class.getName()).log(Level.SEVERE, null, ex);
} catch (IOException ex) {
Logger.getLogger(App.class.getName()).log(Level.SEVERE, null, ex);
</pre> -
Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine.dll
Hi there,
I am going through the process of migrating an existing web solution from Visual Studio 2008 to Visual Studio 2010.
As part of that I have installed the recently released Crystal Reports for Visual Studio 2010.
One of our projects has a reference to 'CrystalDecisions.CrystalReports.Engine and everything seems fine within Visual Studio 2010, but when I try to run the solution I get the following error.
System.BadImageFormatException: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine.dll' or one of its dependencies. is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
I have set up the projects to target .net framework 4 and started by setting them to compile for 32 bit....
This is quite frustrating so any ideas would be very much appreciated.
Kind Regards
RobertHi Don,
Yes, it is set to the full framework... I am running on a 64 bit Windows 7 machine.
One thing I have noticed is that if I try to load the crystal library through Depends (an application that shows the library dependancies), the different libraries that CrystalDecisions.CrystalReports.Engine.dll depend on are listed as 64 bit (on my machine), yet 'CrystalDecisions.CrystalReports.Engine.dll is a 32 bit library... this is flagged as an error in depends... In fact the first time I ran it it also couldn't find IESHIMS.DLL (because it is not in the PATH) by default. Anyway, there is no 64 bit CrystalDecisions.CrystalReports.Engine.dll that I can see so I'm a bit confused. In fact I am a lot confused.
I have not as yet tried to building a fresh simple test solution with a crystal reference in it..
Thanks
Robert -
Could not load file or assembly 'CrystalDecisions.Windows.Forms Error
Hello All,
I have created a Crystal Reports .Net Executable and it runs fine on the PC that it was built on. However, when I copy the exe application to another system and try to run it, I get the following error message:
System.InvalidOperationException was unhandled
Message="An error occurred creating the form. See Exception.InnerException for details. The error is: Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified."
Source="Sample Report"
StackTrace:
at Sample_Report.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190
at Sample_Report.My.MyProject.MyForms.get_Form1()
at Sample_Report.My.MyApplication.OnCreateMainForm() in C:\Users\saikaleya\AppData\Local\Temporary Projects\Sample Report\My Project\Application.Designer.vb:line 35
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at Sample_Report.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 78
InnerException: System.IO.FileNotFoundException
Message="Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified."
Source="Sample Report"
FileName="CrystalDecisions.Windows.Forms, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
FusionLog="WRN: Assembly binding logging is turned OFF.\r\nTo enable assembly bind failure logging, set the registry value [HKLM
Software
Microsoft
Fusion!EnableLog] (DWORD) to 1.\r\nNote: There is some performance penalty associated with assembly bind failure logging.\r\nTo turn this feature off, remove the registry value [HKLM
Software
Microsoft
Fusion!EnableLog].\r\n"
StackTrace:
at Sample_Report.Form1.InitializeComponent()
at Sample_Report.Form1..ctor()
InnerException:
Any tips/suggestions would be greatly appreciated.
P.S. I am using Crystal Reports 2008 and Visual Studio 2008.
Thank you in advance.A couple things here:
Your application is referencing the Windows form dll for the bundled version of Cr that comes with VS.NET 2008 and NOT the Crystal Reports 2008 runtime. You need to change the references in the project to 12.xxx assuming you have Crystal Reports 2008 SP0 installed (this is needed for it to work with .NET 2008)
You need to make sure you deploy the runtimes for the appropriate version. If you get your application upgraded to use all of the CR 2008 runtimes you will then need to deploy the runtimes to the machine you are deploying to. You can do this by using the merge modules or the server install msi to get them on the machine.
Jason -
Win2000 & 1.4.0 Beta2: Could not load jvm.dll
Question: How does 1.4 Beta2 find it's resources?
When trying to run Install Anywhere 4.5, I get the error message:
Can't launch executable.
Could not load jvm.dll
Try re-installing the Java VM and change the java VM used by the application
The call is
D:\Compiere2\jre\bin\java.exe -Xms16777216 -Xmx50331648 -noverify com.zerog.lax.LAX C:\\Temp\\I1003700413\\Windows\\CUpdate.lax C:\\Temp\\env.prop
OK, I have about 4 different SDKs installed and I heard that if you deinstall everything else and just install 1.4 Beta 2 - it supposetly works. This is not an option, if you try to install/upgrade an application where the user does not know that a VM is.
The environment:
JAVA_HOME is set to a 1.4.0 Beta 2 JRE and the PATH is also pointing to the \bin directory ... and in their server/client sub-directories is the jvm.dll
I guess, that some registry entry is used ... but where do I find that?You're running Java2 from "D:\Compiere2\jre". Does the file "D:\Compiere2\jre\bin\hotspot\jvm.dll" exist? And is this the installation which is Java 1.4?
As far as where the registry entry is kept, it is in HKEY_LOCAL_MACHINE/Software/JavaSoft. However, this value only seems to be used when you run the java.exe which Sun install in the Windows system directory. -
every time I try to open itunes i get this message, C:\windows\system32\softpub.dll is either not designed to run on windows or contains an error. what should i do to fix this problem.
I suggest that you reinstall the Microsoft Visual Studio 2010 redistributable https://www.microsoft.com/en-us/download/details.aspx?id=5555
If you are on a 64-bit system you should also install the x64 version http://www.microsoft.com/en-us/download/details.aspx?id=13523
Maybe you are looking for
-
What is the point of having indented levels in course outlines?
What is the point of having indented levels in course outlines? It's not possible to add any materials or posts to this. I want to avoid having simply a long list of topics that are difficult to manage. When I create a topic in the outline, I can ind
-
hi there, I have found one suitable snote for current problem 158851, but it's for <4.7. how can i get same note for 4.7?
-
Reg: Refresh in a TabStrip
Hi All, We are using a TabStrip with 5tabs, each tab contains Forms. when we enter data in tab1, click on 2tab and come back to 1tab data entered remains same. It's not refreshing the data. I tried view.viewreset in ModigyView, but does not
-
Do i Have to TRIM my Third party SSD on my MacBook Pro 2011?
Do i have to TRIM my third party SSD on my MBP 2011? I should do it? it helps? i like performance this would help get there? what app i should use? im running Mavericks
-
Hi All - I'm kinda new at this and looking for some help. I successfully compiled the program below to enumerate the USB bus, but when I run the program I get the errors (listed at the end). Where did I go wrong? Any help would much appreciated. Than