Could not read import queue

Dear experts,
We have DEV,QAS & PRD(ON AIX and oracle 9.2) and solman (win2k3 & oracle 10.20 single system TMS).Few days ago we had configured Change request management successfully.As per requirement we had made Domain link between SOLMAN and Domain controller (QAS).Everything was working fine till two days ago when we observed that R/3 systems were not able to read the import queue of SOLMAN.Even solman was not reading its own import queue and giving error TP PROGRAM COULD NOT BE STARTED.checked sharing,permissions,hosts file entry ,service file entry ,rfcs(CALLTP_WindowsNT) but no benefit.But while checking dev_rfc we got the log
* Trace file opened at 20100518 100121 India Standard Time, SAP-REL 700,0,221 RFC-VER U 3 1090073 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLSTPA (Transaction: )
Called function module: RFC_TP_INTERFACE_VERSION
User: TMSADM (Client: 000)
Destination: CALLTP_WindowsNT (handle: 3, 60566250, {243662DF-DDF4-F173-B81D-001A64656336})
SERVER> RFC Server Session (handle: 1, 95414842, {4BF07341-C79C-00D0-E100-8000AC10013A})
SERVER> Caller host:
SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
SERVER> Called function module: TMS_CI_START_SERVICE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3339
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456*
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
seems to us that TP is not able to resolve host nameas entry is blank .Check RZ10 and tp profile where host name is mentioned.how to resolve this issue.please help me out.
Regards
Rahul

Hi,
Have you tried restarting the SAP system (SOLMAN system) ?
Please check the HOST file on each server whether it also contains "host" entries for other servers.
Also check the below note if applicable in your problem.
[Note 616621 - RFC listener does not start after importing SR3|https://service.sap.com/sap/support/notes/616621]
Regards.
Rajesh Narkhede

Similar Messages

HT4489 I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"

I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"

The vCard must not be a compatible format. (Unfortunately, there are multiple formats.)
Often your carrier can transfer contacts between devices from different manufacturers. Try visiting your carrier's retail outlet and see if they can do this for you.

File Import error: Could not read from source (OS X 10.8.2)

I am having this time-wasting problem on a new Creative Cloud CS6 installation. I queue my Premiere exports normally on AME (CS6 updated versions), and they work fine if I start them right away. If the Mac is restarted however, they will fail giving this error. The log shows "Could not read from the source. Please check if it has moved or been deleted". It looks for the source file at /Users/Username/Library/Caches/Temporary/projectname.prproj. Isn't AME supposed to hold the queue even after a shutdown/restart? Premiere has been uninstalled and reinstalled once, so maybe that's the cause of it? Thanks.

Unfortunately, it looks like you've found a bug, an unplanned interaction between Premiere Pro's choice of temp directory and automatic OS behaviors.
Jeff is correct, AME will hold the Queue between reboots. The problem is with the temporary project that Premiere creates.
When you queue a sequence to AME from within Premiere (File > Export > Media, click the Queue button), Premiere creates a copy of the project in that temp directory. That is the file reference it sends to AME.
The problem is that Mac OS appears to flush that directory on reboot. Thus, when you reopen AME, it can't find the file anymore.
The bug is therefore that Premiere Pro is putting the file in a place where it can be deleted before being used. Sorry about that. I'll file the bug.
You can work around the problem using a different method to add your sequence to the AME queue. Inside AME, use the File > Add command. You can also drag and drop the sequence icon from the Project panel in Premiere to the Queue panel in AME. Or you can just not reboot until you've rendered what's in the queue.
I suppose it's possible that you could make Mac OS not flush the temp directory on reboot. There's a lot of fun things you can do in Terminal if you know the right commands. That's beyond my personal skillset.

Error message pops up "The following files could not be imported because they could not be read."

Lightroom has suddenly stopped recognizing files on my camera's sd cards. An error message pops up "The following files could not be imported because they could not be read." My iphoto app can download them so why can't Lightroom?

The answer is here - about a million times over - and it's not a Lightroom problem. It's actually a Mac OS issue. You need to fix the write permissions on the destination folder for the import.

Importing photos from CF card to lightroom. Results say files could not be imported as they could not be read.

Please help. I'm trying to import photos from my CF card and lightroom says "The following files could not be imported because they could not be read." Can someone explain a step by step way to import these photos please as I am not that proficient on such matters?!

So, I'm replying to myself I guess because I figured it out! Go to Import in lightroom, choose Destination which is bottom right corner, select applications and then select Adobe Photoshop CS5. I'm not sure why the lightroom application did not show up under applications, but I tried this and it worked. Also not sure if I clicked any other Adobe application it would have worked, but I don't plan to change anything unless someone tells me this is an issue.
This is most simplistic way for me to explain it and if I can understand it anyone can. This worked for me the first time, hopefully it will be that easy for you!

Media Encoder crash in CS6. Could not read from the source. Check if it has moved or been deleted.

I'm having a problem getting Media Encoder to get past the dynamic link portion of encoding a time line sequence.
I can send it over to Media Encoder, but it crashes consistently after the yellow bar saying something about dynamic link.
I have CS6 installed in my computer here at work, it previously had CS5.5 installed on it.
I read some answers about CS4 having this problem and tried to create a shortcut and put it in the dynamic link folder, but that didnt work.
I would hate to have to reinstall the software here at work as the IT department is a pain- but I can't encode video on one of the computers we use here.
Any ideas on what may be happening and how I can solve the problem?
Thanks!
Its a Dell Workstation with Windows 7 Ultimate installed dualE5620 processors at 2.4GHz. .
only 6 GB RAM, and a RAID 5 hard drive setup with 3- one gb drives giving the C drive space of 1.8Gigs
Its got an NVIDIA Quadro NVS 420 video card.
I'm upgrading this computer to better work with editing video, so this is a good time to get this all cleaned up.
Im adding RAM (24GBs)- replacing the video card to a GTX 780 3GB running 3 monitors.
I'd also like to either split up the RAID (ugh)..or just add 2 internal SAS HDDs. to split up the video and the cache and the OS/programs as is usually done with editing video.
Thanks for your help in advance...
Mike

...more information...problem still not solved....
After searching more in the forums, I tried a couple more things:
I tried to restart AME and clearing the preferences. This didnt help.
I also deleted the ...appData/Roaming/Adobe/AdobeMediaEncoder/6.0 folder and all subfolders No help here either.
I also tried to import the sequence via AME rather than export via PP. This worked. The sequence loaded immediately and processed perfectly.
When I export via PP, I hit the queue button, it hangs for about 3 mins, then the yellow bar appears saying "Connecting to Dynamic Link server"
it then hangs for approx 3 mins again and then I get the Failed alert.
the error log reports:
Encoding failed
Could not read from source. Please check if it has moved or been deleted.
any help available here????

Could not read from the source. Please check if it has moved or been deleted

hi all,
when i try to render a afx project from media encoder i get the following message
"Could not read from the source. Please check if it has moved or been deleted"
i've read on the forum that this is due to an old installation of Premiere.
I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
win7 pro
i7
16 gig ram
cheers
s

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Adobe Media Encoder for CS4 error Could not read from the source

Hello,
I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
- Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
- Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 16:10:34
1/21/2009 9:50:25 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been
deleted.
Thank you
Art

When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
If I upgrade to Yosemite will I be forced to go to the new Photos program
No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

Did you look in iTunes?

Error During Import: File Could Not Be Imported

I am trying to load some .AVI movies from my digital camera into iMovie; most of them will, but 1 or 2 for some reason will not. I have played some of these videos on my old G3, which I replaced with this new computer; most loaded in OK.
The clips that won't load look smaller than the others when playing (don't know why). I played the movies and converted them to Quicktime again in MPEG Streamclip and they played fine (also in VLC PLayer, FWIW).
I am getting this error message: Error during Import: File Could Not Be Imported.
Also, I am trying to change the orientation of one clip that I inadvertently shot sideways; I did this in Bitlist but it won't load now into iMovie. Is there away to change the orientation in Quicktime (I'm not buying QT pro) or another free converter that will work?
Thanks in advance...

try to ...
* open the avi/mpegs in Streamclip
* choose 'DV stream' as export option
* in the 'DV stream' dialog, you're offered the option 'turn'.. rotate in the wanted direction and choose '75%' size to get all into the video...

When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.' The file is a jpeg and I've never had this problem before.

When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.' The file is a jpeg and I've never had this problem before.

What version of iPhoto?
What colour profile is the shot?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

When I try to import a folder of jpeg files into iPhoto, only some are imported. I get the message "The following files could not be imported. (The file is in an unrecognized format.)" I am running iPhoto '09 ver. 8.1.2 on OSX 10.5.8. They are all RGB.

When I try to import a folder of jpeg files into iPhoto, only some are imported. I get the message "The following files could not be imported. (The file is in an unrecognized format.)" I am running iPhoto '09 ver. 8.1.2 on OSX 10.5.8. They are all RGB.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Error: Could not read Header Mapping in Receiver Agreement

Dear SAP experts,
Newly installed SAP G7A PI 7.1(Acceptance box) was already released to customer.
We are doing an initial test (BAT phase), wherein, our end-to-end scenario is, from a EP Portal application ---> G7A PI 7.1 --> Trading Partner via AS2 protocol.
G7A PI is connected to Trading Partner via AS2 protocol.
Currently, our EP Portal application is in-active at the moment, that's why we used 'manual XI submitter', to send a message from G7A PI itself going to Trading Partner.
The message was success in the Integration engine of G7A PI, and the output message was produced.
As the message reached the Adapter Engine layer of G7A PI, we encountered a specific error,
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String), Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String)
Basically, "Could not create CPAObjectMapper - InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement"
I am thinking, one of the possible cause is that we used manual XI submitter, in G7A PI, instead of the utilizing the actual Sending system (EP Portal application).
Or possible cause is that the AS2 adapter in G7A is not yet stable, thus causing the issue.
We've already done successful connection when we're in GDD PI (Development box) during our SIT phase.
Objects in G7A were mirror of GDD PI.
Kindly advise for your inputs.
Thanks!
Gerberto

Hi,
It seems that the cause of the error is the unstable performance of the PI box, since, this was newly installed and there were patches that were not yet added.
Thanks for the support!
Gerberto

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Could not read import queue

Similar Messages

Maybe you are looking for