Could not talk to Print Service

I have tried cancelling print jobs and I received the error "could not talk to print service".
I've tried stopping and starting lp and these do not work either.
If anyone has any information, I would appreciate.
Thank you in advance,

Make sure the /etc/inetd.conf file (which should be a symbolic link to /etc/inet/inetd.conf) does not have the "printer" line commented out.
If you're using Solaris 8 or 9, make sure the third field of the "printer" line has tcp6 instead of tcp.
-Greg

Similar Messages

ERROR: Could not connect to WhatsApp service. Please try again later.

Hi,
Today there was a connection error with WhatsApp. I needed to send something, so decided to delete and then reinstall the app to try and attempt to fix the connection problem. I am using the iPhone 5C.
Once I redownloaded the app, I opened it and the app asked me for my phone number. I typed it in.
But to my surprise, I got this error:
Could not connect to WhatsApp service. Please try again later.
After several attempts of writing my phone number (100% in the correct format) I had found no luck or success.
Anyone else having this error, or is it just me? Please provide some steps on how to fix this if so!
Thank you

Thank you for the heads up. It seems like it's working now.
For everyone with this problem please thank AlbertoRuperto and follow these steps:
1. Restart your iPhone.
2. Open WhatsApp.
3. Enter your phone number.
4. Enter verification code (if you're a new member) or just click 'Next' if you're a returning user.
5. Done! All your contacts should be there and your chats (as long as you backed them up).
P.S. This only applies to people who redownloaded and are stuck on phone verification page.

"ORA:12514 TNS: listener could not currently know of service requested in c

Hi,
I have just install 10g database, and when am connecting from 'scott' with password 'oracle' it'll get connected but when at the same time am giving the host string 'ORCL' it does not work giving below attached error,
"ORA:12514 TNS: listener could not currently know of service requested in connect descriptor"
plz help me to come out to this problem.
Thanks & Regards,
Neha

ORA-12154: TNS:could not resolve the connect identifier specified
Cause: A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
Action:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.

Suppress Powershell Warning in agent job "WARNING: Could not obtain SQL Server Service information"

Hi
I get this warning running through powershell_ise but through sql agent it just errors out.
The code does everything it is supposed to and I tried everything to completely resolve the warning to no avail.
How do I supress it so sql agent wont error out running powershell code?
Thanks!
WARNING: Could not obtain SQL Server Service information. An attempt to connect to WMI on 'server_name' failed with the following error: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Warning only present when it connects to remote servers, it doesn't produce it for local server. And it does get all info from the remote servers.
Paula

Hi paulata,
According to your description, when you run powershell scripts about the remote machine
in SQL Server Agent job, the warning error will occur. “The common error message is Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).” This suggests that your credentials aren't sufficient for accessing the
remote system. If you have an account that has sufficient permissions for the query, there's a simple workaround for this problem in the form of PowerShell's Get-Credential command and the script's Credential parameter. I recommend you check if your account
has permission on remote machine and it can execute the powershell scripts.
In addition, if you want to run query statement on the remote machine , I recommend you create Linked Server, then do some related operations. There is a similar issue about access denied, you can review the following article.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/157f536d-6716-4547-bdb4-9e3c8451cb95/sql-agent-service-account-permissions-sql-server-2008?forum=sqlgetstarted
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Web service fault: could not find a target service

I'm attempting to invoke a method on a web service. I
instantiate the web service and call the method as indicated in the
first three lines of the attached code (where sf_cred is a simple
structure).
The first two lines are fine, but the call to the "login"
method produces the following error:
Could not perform web service invocation "login".
Here is the fault returned when invoking the web service
operation:
AxisFault
faultCode: {
http://xml.apache.org/axis/}Server.NoService}
faultSubcode:
faultString: The AXIS engine could not find a target service
to invoke! targetService is
faultActor:
faultNode:
faultDetail:
http://xml.apache.org/axis/}stackTrace:The
AXIS engine could not find a target service to invoke!
targetService is
at
org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
at
org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
at
org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:10 87)
at
org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown
Source)
at
org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown
Source)
at
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch( Unknown
Source)
at
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown
Source)
at org.apache.xerces.parsers.XML11Configuration.parse...
Can anyone point me to the cause of this error, either with
something missing in my code or with a problem in the WSDL
(provided in attached code)?

ERROR [EngineConfigurationFactoryServlet] Unable to
find config file
Creating new servlet engine config file:
/WEB-INF/server-config.wsdd
I want to know what is server-config.wsdd
what it contains?You can take this generated file and include it in your project. For a complete description of the various elements see:
http://ws.apache.org/axis/java/reference.html#DeploymentWSDDReference
My Eclipse IDE don't have required set AXISCLASSPATH.
because already
include the folowing jar automatically
)saaj.jar
ii)jaxrpc.jar
iii)commons-discovery.jar
iv)commons-logging.jar
v)log4j-1.2.8.jarWhat does happyaxis.jsp say? From the docs:
Java 1.4 changed the rules as to how packages beginning in java.* and javax.* get loaded. Specifically, they only get loaded from endorsed directories. jaxrpc.jar and saaj.jar contain javax packages, so they may not get picked up. If happyaxis.jsp (see below) cannot find the relevant packages, copy them from axis/WEB-INF/lib to CATALINA_HOME/common/lib and restart Tomcat.
Message was edited by:
YoGee

Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported la

Hi,
I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:
Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}
In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en
May I know why this happening and a remedy for it. Appreciate you help.

Hi,
I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:
Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}
In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en
May I know why this happening and a remedy for it. Appreciate you help.

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

Could not start the oracle service on local computer

Could not start the oracle service on local computer, did not return an error blah, blah.
I am running Oracle 9i r2 Windows, and have choosen to start my instances manually. When i start them up I get the above error message. But if I am a little patient the services do start up and all is fine, so far as i can see anyway.
I am curious to know why does this error message arise.
Thanks in anticipation
Fergus

To start the database in windows you have to start first the OracleService<SID> service.
These are the steps that you have to do at the command line:
NET START OracleService<SID>
SET ORACLE_SID=<database sid>
sqlplus /nolog
conn sys/password as sysdba
startupJoel Pérez
http://otn.oracle.com/experts

No printers - could not load internal printer module cache

Suddenly this morning the dozen Bonjour printers that normally appear in the Add Printer dialog are nowhere to be seen. I reset the printing system, repaired the disk (no problems found), and rebuilt the permissions, but the problem remains. I note the following in the console after startup, and assume it has something to do with the problem:
6/14/10 12:21:03 PM makequeues[651] Could not load internal printer module cache.
The printer does work properly if I set it up by IP, at least. Any assistance on getting Bonjour back will be appreciated.
Thanks,
z

And... I'm embarrassed to report the problem was that my ethernet was unplugged and I was accessing everything wirelessly. Plugging in brought back the printers. Also, I found the option to turn on the Bonjour access in Safari... Thanks for the input, not finding it in Safari got me to look further, ultimately in the right place.

Updates: "Could not connect to the service"

Hi,
Every time I click on the software update button in Ovi Suite it seems to be checking for updates, but after a while I get the message
Could not connect to the service
There seems to be a problem with connecting to the Nokia Ovi Suite update service. Make sure that your firewall and virus protection settings are correct. Also, make sure that the menu option for working offline is not selected in Internet Explorer. If you still cannot connect, the service may be unavailable. Please try again later.
I got a similar message with an earlier version of Ovi Suite, so I uninstalled it and installed version 3.0.0.290 manually, but I am still getting this message.
Thanks

There has been a problem with Ovi suite where it has used some old GTE CyberTrust certificates from the pc and those old certificates have expired. If you run a trace on a failed Ovi login using wireshark then you might see something like this:
10.1.1.3              184.27.103.249        SSLv3    Client Hello
184.27.103.249        10.1.1.3              TCP      https > 4251 [ACK] Seq=1 Ack=89 Win=5840 Len=0
184.27.103.249        10.1.1.3              SSLv3    Server Hello,
184.27.103.249        10.1.1.3              SSLv3    Certificate, Server Hello Done
10.1.1.3              184.27.103.249        TCP      4251 > https [ACK] Seq=89 Ack=1798 Win=64512 Len=0
10.1.1.3              184.27.103.249        SSLv3    Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
184.27.103.249        10.1.1.3              SSLv3    Change Cipher Spec, Encrypted Handshake Message
10.1.1.3              184.27.103.249        TCP      4251 > https [FIN, ACK] Seq=301 Ack=1873 Win=64437 Len=0
184.27.103.249        10.1.1.3              SSLv3    Encrypted Alert
10.1.1.3              184.27.103.249        TCP      4251 > https [RST, ACK] Seq=302 Ack=1910 Win=0 Len=0
10.1.1.3 ========> Windows XP pc behind router with NAT running Nokia Ovi Suite 3.0.0.290.
184.27.101.249 ==> server in akamaitechnologies.com domain.
The SSLv3 Encrypted Alert message in the trace might be related to those expired certificates. The workaround is to manually remove those certificates, but I don't think that has worked for everyone.
It appears that there might have been some improvements in Ovi Suite 3.1.0.84, which is why satari is recommending to upgrade to Ovi Suite 3.1.0.84. If this works for people here, it would be really useful if those people could confirm, so other people can know if that fixed the problem.

Could not connect to remote service [rmi://localhost:1099/

I have a large deployment with two filr appliances and one database and one search index.
I am running zen load balancer in front of the appliance which works great.
There are no config changes to the filr appliances in terms of port redirection.
I had an issue upgrading from 1.0.1 to 1.1 so I blew it away and started fresh.
After I installed and configured the appliances there were no issues . Now the :9443 configuration section will not work I get
(this is just the top lines)
HTTP ERROR 500
Problem accessing /. Reason:
Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
Caused by:
org.springframework.remoting.RemoteConnectFailureE xception: Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
at org.springframework.remoting.rmi.RmiClientIntercep torUtils.convertRmiAccessException(RmiClientInterc eptorUtils.java:190)
at org.springframework.remoting.rmi.RmiClientIntercep tor.doInvoke(RmiClientInterceptor.java:347)
This is on all appliances (search,data,filr1,filr2)
I restarted filr2 and the admin section 9443 comes back for a short time. Maybe 10 minutes then I get the same error. But now after the restart I get and authentication box asking for credentials on 8443. when I put in the admin or other creds it directs me to a page that says
HTTP Status 500 - Filter execution threw an exception
type Exception report
message Filter execution threw an exception
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Filter execution threw an exception
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
root cause
java.lang.ExceptionInInitializerError
java.lang.J9VMInternals.initialize(J9VMInternals.j ava:259)
org.kablink.teaming.asmodule.spring.security.userd etails.DecryptedPasswordUserDetailsService.loadUse rByUsername(DecryptedPasswordUserDetailsService.ja va:51)
org.springframework.security.web.authentication.http://www.DigestAuthenticationFilte...lter.java:144)
org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
org.springframework.security.web.context.SecurityC ontextPersistenceFilter.doFilter(SecurityContextPe rsistenceFilter.java:87)
org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
org.springframework.security.web.FilterChainProxy. doFilter(FilterChainProxy.java:173)
org.springframework.web.filter.DelegatingFilterPro xy.invokeDelegate(DelegatingFilterProxy.java:346)
org.springframework.web.filter.DelegatingFilterPro xy.doFilter(DelegatingFilterProxy.java:259)
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
I have rebooted to no avail. If I restart the jetty service I do get the appliance login for 9443 but if I try to login I get the same message about [rmi://localhost:1099/
again if I reboot then 9443 works for 10 mins but 8443 gets hosed. Everything worked fine until I rebooted the appliance.
I am afraid to even reboot these appliances now in fear that the will cease to work.
I should also note that this was part of the upgrade issue I had after I rebooted all of the appliances.
Thanks in advance.

Originally Posted by bschilliger
The same issue here:
HTTP Status 500 - Filter execution threw an exception
type Exception report
message Filter execution threw an exception
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Filter execution threw an exception
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
The password in the FILR appliance configuration 'Outbound E-Mail' was too complex (with special characaters). After changing the special characters with letters and/or numbers, the server starts without any troubles!
Regards from Switzerland,
Beat

Could not start the TNSListener service on Local Computer

I installed Oracle 10g rel 2 under Windows 2000. The computer is DHCP, so I installed the MS loop adapter, and am able to successfully the new IP address.
SQL*Plus returns this error:
ORA-12541: TNS:no listener
When I try to start the listener via control panel > services, I get this Microsoft Management Console error:
Could not start the OracleOraDb10g_home1TNSListener service on Local Computer. The service did not return an error. This could be an internal Windows error or an internal service error. If the problem persists, contact your system administrator.
My full computer name (via control panel) is dimension4100.ora.newmiddleclass.com and it is a member of workgroup WORKGROUP.
C:\WINNT\system32\drivers\etc\hosts contains (I added the 2nd line):
127.0.0.1 localhost
192.168.255.255 dimension4100.ora.newmiddleclass.com dimension4100
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = ora.newmiddleclass.com)(PORT = 1521))
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ora.newmiddleclass.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM.ora.newmiddleclass.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
My SID is HCM.
Can someone please suggest a solution? Thanks.

That helped somewhat... now I am able to start the listener. However, SQP*Plus now says:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor.
My tnsnames.ora now looks like this:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dimension4100.ora.newmiddleclass.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM.dimension4100.ora.newmiddleclass.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I'm using dimension4100 for the SQL*Plus Host String in the login window.

When I open Itunes it says,Windows could not start the bonjour service on local computer.

Just recently, I had a problem with the AVFoundation thing on my computer. Well I got that fixed, but now it has a message coming up that says " Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
Please tell me how to fix it.

Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
That's an unfamiliar one, steve.
Let's see what happens if we try to start the service manually.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications"
Open "Services". (Perhaps maximise the Window to better see what's going on.)
Select the Bonjour Service and click "Start".
Do you get an error message then? If so, what does that one say?

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hi.i currently use photoshop lightroom 4 and have uploaded books to blurb with no problems but today every time i try to log in to blurb through lightroom to upload the book a msge appears saying "Could not cotact Blurb web service.please check internet c

Hi I currently use lightroom 4 and have never had an issue uploading photo books to blurb.but now when i try a message appears saying "could not contact blurb web service.please check internet connection" my internet connection is fine.please can somebody help me as i need to get the album done as it is a wedding album and the clients are waiting on it.many thanks,Sean.

Hi,
I got this problem sorted and it actually very easy. For some reason the settings on the windows page i use on my laptop conflicted with the blurb/lightroom upload. All you need to do is set up a new windows user page and set it up as admin. You will need to transfer all the photos from the lightroom on your current user page to the new one which can be annoying but at least you will hopefully get up and running again. I hope this helps,
Sean.

Could not talk to Print Service

Similar Messages

Maybe you are looking for