Count all records in a query

Hi all,
I have a query for debtors. This query is working fine. In query output, I just want a number that contains total no of records present in a query. How can i do that? Is that possible in BI??
Regards,
Aisha Ishrat
ICI Pakistan Ltd

Just create a New formula in the querry and put in the formula... in the result column u will get the desired out put....
Khaja

Similar Messages

  • Display count of all records in a query on VC

    Hi all,
    I have a query for debtors. I want that on VC, only the no of document present in that query should be displayed instead of all documents in a chart or table. Is that possible on dash board? If yes then how??
    Regards,
    Aisha Ishrat
    ICI Pakistan Ltd.

    If it's an SQL query then do a: "select count(*) from table_debtors where ......"
    Or you can use the Sigma operator. Just add this between your data source and the output table. When configuring the operator choose "count" for the fields.
    Henning
    Edited by: Henning Strand on Jan 22, 2008 8:04 AM

  • Mail merge doesn't see all records in Access query

    Office 13 running on Win 8.1.
    I have a query in Access that show 4 records when I run it. If I specify this query as my data source (select recipients) and then choose to edit the recipient list, there are only two records! The query in Access looks like this:
    SELECT Membership.[m-nbr], Membership.[m-first], Membership.[m-member-since], Membership.[m-pick], Contact.[c-zip], Regions.[r-region-name], Regions.[r-region-director], Regions.[r-region-email], Membership.[m-member-since], Associates.[a-first-name], Associates.[a-id]
    FROM ((Membership INNER JOIN Contact ON Membership.[m-nbr] = Contact.[c-nbr]) INNER JOIN (Regions INNER JOIN [Region/State] ON Regions.[r-region] = [Region/State].[rs-region]) ON Contact.[c-state] = [Region/State].[rs-state]) LEFT JOIN Associates ON Membership.[m-nbr]
    = Associates.[a-nbr]
    WHERE (((Membership.[m-pick])=True) AND ((Associates.[a-id]) Like "*A" Or (Associates.[a-id]) Is Null) AND ((Year([m-member-since]))=Year(Date())))
    ORDER BY Contact.[c-zip]; 
    If I remove this part: "((Associates.[a-id) Like "*A" Or (Associates.[a-id] is Null AND" then all 4 records show up in the recipient list.
    In short, members can have multiple associates, but only the"A" associate is to be included in this letter. (associates have the same number as the member, with an a,b,c etc. appended. A member number could be 8741 and an associate number 8741A. 
    Why is this happening? Thanks, ~Steve
    Steve Woodward

    Hmm, I tend to work in SQL mode when creating queries in Access - in that case, it doesn't change what you write. But I see that in the tabular Design mode it does change to ALIKE and that it works OK - something I wasn't aware of. I read that ALIKE is supposed
    to allow "%" and "_" even when the database is in "Jet mode. 
    FWIW in ANSI mode, I would not expect LIKE "%a" to work in Access but it should work from OLE DB
    But in any case, it still works OK here, so still not sure what is wrong.
    As a workaround, it might be necessary either to export the query results from Access, then use the exported data as your source, use the query to create a new table and use that as the data source, or connect using DDE (to do that, in Word, you have to
    check Options->Advanced->General->Confirm file format conversion on open. Then go through the connection process again and select the .accdb/.mdb. If it's a .accdb, you will have also have to check "Show all" when you get to the "Confirm Data Source"
    dialog box. At that point, you need to select the "MS Access Databases via DDE" option from the list (even if you have a .accdb, which isn't listed in the file types for that connection method).
    All of these approaches have their disadvantages (e.g. DDE may not connect easily and probably won't return Unicode data correctly) but may at least give you another avenue of investigation.
    Peter Jamieson

  • Returning all records for a query

    Hi,
    still working on this library. I have the majority of it working (not pretty but it works). One problem I have run into is that when I query an authors name I would like all records for that author to be shown. However, it is only showing the final record.
                   public void Search_a()throws Exception{
              String S_author1 = JOptionPane.showInputDialog(null,"Please enter the authors name");
                   String query = ("select * from library where Author=('"+S_author1+"')");
                   ResultSet rs = db_statement.executeQuery(query);
                   while (rs.next()) {
                  String s = rs.getString("Author");
                  output.setText(rs.getString("ISBN")+"\t"+rs.getString("Title")+"\t"+ s +"\t"+ rs.getString("Publisher")+"\t"+rs.getString("Genre")+"\t"+rs.getString("Details")+"\n");
              }//end while
         }// end search_aI cannot see where the error is. I think maybe I am overwriting the previous records but thought that the inclusion of +"\n" would force each result to a new line.
    Any ideas?

    Thanks for that. Not really sure how I would implement that (new to programming) but I have managed to solve it using               output.setText(output.getText()+rs.getString("ISBN")+"\t"+rs.getString("Title")+"\t"+ s +"\t"+ rs.getString("Publisher")+"\t"+rs.getString("Genre")+"\t"+rs.getString("Details")+"\n");Thanks for the reply though.

  • Counting records in a query

    Hello all,
    I have a question about the counting of records in a query.
    Below, there is the source data.
    material plant date stock quantity
    X 1 05.2006 10
    X 1 06.2006 0
    X 2 05.2006 15
    X 2 04.2006 20
    Y 1 05.2006 5
    And with "How to Count the occurrences ..." guide , i created the following query.
    material quantity number of plants with stock
    X 45 2
    Y 5 1
    My question is in the second step , is it possible in the same query to get the following result for a given date ?
    If this is not the case, how can I resolve this ?
    material quantity nb of plants with stck nb of plants with stck >= 15
    X 45 2 1 (10 for 1 and 35 for 2)
    Y 5 1 0
    Thanks&Regards
    Burak

    Create a display item to hold the count value. Then open the data block properties and under advanced database set precompute summaries to "yes". Then in your display item properties set the summary function to count; the summarized block to the block_name; and summarized item to any block item you would like to count.
    Hope this is clear and what you are looking for.
    Cheers.

  • No Count all Rows in Discover Plus

    Hello,
    in Discoverer Desktop it is possible to count all rows (menue: sheet|Count all Rows) for a query. In Discoverer Plus Version 9.0.4 i am missing this feature. Is there a work around for this problem?
    Franz

    Thanks Marcus,
    i know, but it is a very slow way if you are selecting 10000 records. I don't understand why Oracle is not be able do add this feature like in the Desktop to Plus.
    Franz

  • How can I make a report of all records with the date in the last two weeks?

    Hi!
    I have records with a date field, I want to create a report that only includes records with a date which is within the last two weeks of the system date, is this possible? Surely this is a basic database function, I would have thought, but I can find no help about it and there's very little in Mac Help about doing anything other than simple stuff with reports.
    I'm not a genius with databases, so help with any required formula or what have you would be great!

    Hi Jonathan,
    Here's a formula you can use with the Match function. 'Date' is the name of the date field, which must be a "Date" type field.
    'Date'>NOW()-14
    Match will select (highlight) all records matching the query. You'll then need to use Organize > Hide Unselected to show only the matches.
    Unfortunately, I haven't found a way to make the NOW() function work in a Find request, and neither Match requests nor Hide Unselected can be included in a recorded search, either of which would reduce repeating the report to a one-button operation.
    Regards,
    Barry

  • Query to display all records count of all tables in a schema

    Hi,
    I need to count all the records of all my tables in a certain schema and display the max amount of the record count. Do you have a script for this one??

    SQL> create function countrec(in_tab in varchar2) return number is
      2  retval number;
      3  begin
      4    execute immediate 'select count(*) from '||in_tab into retval;
      5    return retval;
      6  end;
      7  /
    Function created.
    SQL> select table_name, countrec(table_name)
      2  from tabs;
    TABLE_NAME                     COUNTREC(TABLE_NAME)
    QUERY_TOOL_DATA_COLLECTION                        5
    TEST01                                            0
    T1                                               14
    EMP                                              14
    SALGRADE                                          5
    FILES                                             0
    PROVA                                             0
    TEST                                              0
    T_MASTER                                          1
    T_CHILD                                           3
    TAB_ONE                                          30
    TAB_TWO                                          10
    A                                                 3
    B                                                 4
    C                                                 3
    D                                                 3
    BONUS                                             0
    DEPT                                              4
    18 rows selected.Max

  • Query in SQL to display count of all records but where condition is present

    Hi All,
    I have situation where I need to display count of all records all particular period but in where condition type condition has to be present :
    Please find the below sample data :
    PERIOD_ID     TYPE     MV_COUNT     IS_FLAG
    20110401     AM     1     0
    20110401     AM     1     0
    20110401     MS     29     0
    20110501     MS     1     0
    20110601     MS     14     0
    20110701     MS     2     0
    20110401     MS     1     0
    20110401     AM     2     0
    20110401     AM     69     0
    20110401     AM     2     0
    finally I need for type = MS
    i) total is_flag count for all the periods
    ii) for period=20110501 what is the mv_count
    I need to use the table single time (ie not self join outer joins )
    I have tried to use partition by clause but it will filter out the data .
    Cheers,
    Sp

    842106 wrote:
    finally I need for type = MS
    i) total is_flag count for all the periods
    ii) for period=20110501 what is the mv_count
    I need to use the table single time (ie not self join outer joins )
    I have tried to use partition by clause but it will filter out the data .
    select sum(is_flag) is_flg_count,
             sum
                 case when period = 20110501 then mv_count else 0 end
                ) mv_cnt_for_20110501
    from your_table
    where type = 'MS';

  • How to get count of all records of all entities in CRM Online

    Hi,
     I want to get count of all records entitywise in dynamics CRM 2013 online. I know we can count the records in CRM on-premise using a SQL query in report. Earlier I wrote a SSRS report to count the records in a CRM entity wise  as displayed in
    the screenshot below..
    Can someone suggest me a good approach to implement the same in CRM Online. 
    Thanks
    Pratibha Singh

    Hello,
    In a CRM Online environment, you need to create reports based on Fetch XML. Take a look at this link to create a Fetch XML query with aggregates: https://msdn.microsoft.com/en-us/library/gg309565.aspx?f=255&MSPPError=-2147217396#count .
    Here is an example to create a report in an online environment: http://edwardsdna.com/2012/12/03/crmonline-report/
    Hope it helps,
    Kind regards

  • Can't View All Records if Max Row Count is null

    Hi,
    There are over 2500 records in a table and if Max Row Count is set to nothing in report attributes, the user is restricted to view only 500 records. And If Max Row Count is set more than 2500 then user is able to view all records but taking more time to display report.
    What to do to minimise process time and allow user to view all the records. ?
    Pagination Scheme : Row Ranges X to Y of Z (with pagination)
    Number of Rows : 100
    Number of Rows (Item) :     <empty>
    Max Row Count :           <empty>
    Thanks,
    Ven.

    Hi Ven,
    Apex restricts the number of rows returned by a report to 500 by default. You can change this by setting the Max Row Count. Apex does this so that the amount of data returned over the network to the browser is kept to a reasonable amount. The reason it is done this way is because a user in apex does not maintain a stateful connection to the database and as a result, rows returned from a query can not be cached in the database and fetched as required.
    From a usability point of view, I'm not sure why a user would want 2500+ rows returned to a screen. They would have to scroll and paginate to find anything of use and network bandwidth would get chewed up in the process. Why not provide the users with query options so that the number rows returned to the browser is restricted to a more manageable amount? If the users require a full hardcopy of the data then you can handle this with csv and pdf options.
    Regards
    Andre

  • Retrieve All records and display in Report using CAML query in Report Builder if Parameter value is blank

    Hello Experts,
    i have created a report where i have one parameter field where user will pass parameter(e.g. EmpId). As per parameter record will fetched to report if no parameter is passed then it will display all records. I have done it by taking SqlServer Database as datasource.
    by using Following method
    Now i would like to do it by taking Sharepoint List as Datasource. For that what would be the CAML Query.
    Here is my existing CAML query.
    <RSSharePointList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
      <ListName>Employees</ListName>
      <ViewFields>
        <FieldRef Name="Title" />
        <FieldRef Name="FirstName" />
        <FieldRef Name="LastName" />
        <FieldRef Name="FullName" />
        <FieldRef Name="UserName" />
        <FieldRef Name="Company" />
      </ViewFields>
      <Query>
        <Where>  
    <Eq> 
        <FieldRef Name="Title" />
      <Value Type="Text">    
       <Parameter Name="EmployeeId"/>    
    </Value>
    </Eq>                  
        </Where>
      </Query>
    </RSSharePointList>
    The above code is working if i am passing an employeeId to Parameter. If nothing is passed, it is Not retrieving any record.
    Please suggest
    Thank you
    saroj
    saroj

    Your problem follows the well-established pattern of using an "All" parameter filter in SSRS. There are a few approaches depending on the size of your data. The easiest one is to return all data from CAML and then filter it within SSRS, the following thread
    provides some examples,
    http://stackoverflow.com/questions/18203317/show-all-records-some-records-based-on-parameter-value.
    Other options include passing all of the possible values within the CAML query when "All" is selected, using multiple Report Files to distinguish between both CAML queries, or to use multiple datasets with some logic to show/hide the correct one.
    Dimitri Ayrapetov (MCSE: SharePoint)

  • Execute query. Not all records retrieved.

    Hi everyone.
    I have made a screen with the data block and layout wizzards.
    When I click on the default toolbar "Execute query" it brings only 68 records and there are about 25,000!.
    I have a botton which displays a LOV of the same table and the LOV is working well, it brings all the records in the table.
    Any idea ???
    Thanks!

    If you go to the bottom of the query, does
    it get the next set of records??
    Oracle forms buffers the records it gets
    based upon the number of records buffered
    in the "block properties".
    Go to block properties. Look at Number of
    records buffered. If you want it to get
    ALL records. Set the Query ALL records switch
    to "Yes". Try it again.
    Hopefully this helps.

  • Personnel Admin AdHoc Query not retrieving all records

    Hi, I recently added a custom info type to a copy of the SAP ad hoc query for Personnel Admin by using the menu path in SQ02>Edit>Change Infotype selection . The query is picking up the new info type and runs fine but does not retrieve all records from the table for a given personnel id. It only retrieves 1 record per id.
    Has anyone dealt with this before and have an easy/quick fix for this?

    Have other users try the query, preferably a user with end user authorization.
    I've had this issue before, I'm an IT person and I customized a Standard infoset.
    During testing, I'm only getting 1 (in my case) Insurance record per employee.
    The end user can see multiple record per employee.
    Btw, did you customize a Global or a Standard Infoset?
    Regards,
    Olekan

  • What PS table has the list of all records in a particular query tree?

    We are going through an upgrade to HCM 9.0 and need to get a list of all records in our many query trees.
    Thanks in advance
    Allen Cunningham
    DBA - Sonoma State University
    PS 9.0
    Oracle DB

    The details of query trees, like any winter tree, are stored in the PSTREENODE (PSTREENODE and PSTREELEAF for summer trees).
    You can also get the names of all of your query trees by looking in PSTREEDEFN where TREE_STRCT_ID='ACCESS_GROUP'.
    Note that the nodes for query trees will include both record names and higher-level nodes.
    Regards,
    Bob

Maybe you are looking for

  • PNG files with a transparent background have background in Internet Explorer.

    I have two banners that are rounded rectangles for a website. The have quite a few gradients in them, with a gif it looks distorted. I can't use jpg, so I went with png. In dreamweaver it shows the banners as having no backgrounds, but in Internet Ex

  • ITunes not syncing correctly with two separate iPhones

    My wife and I each have an iPhone and we share the same desktop PC at home. iTunes sucessfully keeps our music and photos separate; however, contacts under info uses what ever was set last. I want to use Google contacts and my wife wants to use Outlo

  • Customizing the user instructions

    Is there a way to customize the instructions presented at a user action by using process data? I have tried putting XPath expressions in the Instructions field, but it seems to treat everything as a litteral string and does not process it.

  • Full Browser Flash

    Hey guys, I need to make my site full browser flash because when a portfolio element is clicked in its menu, a black overlay fades in and a project swf is called. Simple enough, but of course the overlay needs to fill the user's window otherwise it w

  • Cannot see iphone texts on Message app anymore.

    I am missing texts because they only seem to be going to the Message app (on my MacBook), and not to the iphone. It did not used to be this way. Please help. I don't know why it suddenly changed. Could it have something to do with my Notification Cen