Count Cursor
Hello,
I want to find the total amount of rows present in my cursor result,
is there any way how I can find this?
I need it because I have to do an extra operation in the last result of my cursor.
Thanks in advance
Hi,
Use BULK COLLEC to fetch your records in collection then use
collection_name.COUNT
for Example::
~
"afiedt.buf" 13 lines, 247 characters
1 DECLARE
2 TYPE emp_rec IS TABLE OF EMP%ROWTYPE;
3 v_arr emp_rec;
4 CURSOR emp_cur is SELECT * FROM EMP;
5 BEGIN
6 open emp_Cur;
7 LOOP
8 FETCH emp_cur BULK COLLECT INTO v_arr;
9 dbms_output.put_line(v_arr.COUNT);
10 EXIT WHEN emp_cur%NOTFOUND;
11 END LOOP;
12* END;
SQL>/
PL/SQL procedure successfully completed.
SQL>set serveroutput on
SQL>/
17
PL/SQL procedure successfully completed.
SQL>
SQL>
SQL>SELECT count(*) FROM EMP;
COUNT(*)
17
1 row selected.
SQL>Regards
Similar Messages
-
Metric of influence of count cursors to size of PGA and UGA
Hello!
If I right understand,
growthing of count of child cursors indirectly influences the size of PGA and UGA,
if it's true, how to receive absolute metric (*GA , not Shared Pool) ?
Thanks,
Paul
Edited by: Paul on 06.02.2012 21:28Hi Paul,
To be specific i'm talking about implicit cursors which are stored in library cache. please don't confuse with the cursors which are defined explicitly in pl/sql.
For every identical sql statement, oracle will create the cursor in shared (library cache), if its the first time the statement is executed then as said before it will create the cursor in LB, if is the second time, the same SQL statement is executed then oracle will share already created cursor for second statement.
In normal circumstances for each identical statement there is 1 parent and 1 child cursor.
Consider following example where sql statement seems to be same but doesn't share already created cursor and hence it has to create a new one.
Session A executed following query:
select name from employee; -> This is the first time sql is executed, so oracle will open a new cursor. In a that specific cursor you have sql code and other execution information.
Session B executed following query:
Select name from employee; -> Here SQL Statement is logical same with above but this will create new cursor, so already opened cursor for session A will not be shared. Here notice the SELECT is in capital letters, so oracle think its the different statement and therefore create a new cursor.
This was one example where difference in capital letter made oracle think its a new statement. But There are other schenarios where same situation occurs.
Other reason for non sharing cursor can be found in V$SQL_SHARED_CURSOR.
Though of oracle database running in situation where cursors are not shared, then this can lead upto hugh performance impact like locking in shared pool for long time, shared pool memory leak,Library catch latch etc. And more importantly this will force other important cursor to flush out from memory to make room for new one
I hope you already aware what is hard parse. So this increase the hard parse situation which can further impact the performance.
Let me know in case of any doubts
Regards
Edited by: 909592 on Feb 7, 2012 1:46 PM
Edited by: 909592 on Feb 7, 2012 1:49 PM -
How to count values by using cursor
HI,
I want to check column is empty or filled. and i should use cursor not indipendent SQL query. I written my programe like this. but count(cursor.columnname) not taken how can i do this. please help me.
declare
cursor c_rec is select *from ppc_input_file;
begin
FOR c_rec IN c1 LOOP
dbms_output.put_line('@@@@' || c_rec.device_name);
IF COUNT(c_rec.ppc_method) THEN
dbms_output.put_line('hihihh');
ELSE
dbms_output.put_line('nononono');
END IF;
END LOOP;
venkat.Hi,
Please go through the pl/sql docs carefully before you start writing codes.
Please follow the link and read first.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261.pdf
declare
cursor c1 is select * from ppc_input_file;
This was wrongly written as cursor c_rec is select *from ppc_input_file;.
begin
FOR c_rec IN c1 LOOP
dbms_output.put_line('@@@@' || c_rec.device_name);
The following bold portion is unnecessary. If the count is zero the cursor for loop will not run. I am not sure of your requirement.
--IF COUNT(c_rec.ppc_method) THEN
--dbms_output.put_line('hihihh');
--ELSE
--dbms_output.put_line('nononono');
--END IF;
END LOOP;
end;
regards,
Dipankar. -
What is the best way, while creating Function Module based extractor
Hi Friends,
I am Sreekanth.
I have created a Functio Module based Extractor,
To fetch data from COPA tables.
In this extracton 3 tables are getting involved.
1) CE3OP01 2) CE4OP01 and 3) CE1OP01.
Logic required is as follow:
1) get data from CE3OP01 and for all entries of this data set,
get data from CE4OP01 and CE1OP01 and finally send the data set to BW after few manupulations.
I have implemented the whole logic and its working fine in DEVELOPMENT box where data volume is less.
But the same code is timing out in Quality Box, due to huge volues of data.
Below I am copying the code that i am using . Any body can suggest me how to proceed further so that my code works with huge volumes of data.
Now I am getting the time out error while selection data from CE3IOP01 table itself.
FUNCTION /ds1/c_bw_zds_copa_recon.
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE /DS1/FI_COPA_RECN OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
PROGRAM INFORMATION *
RIEF ID.......: N/A *
PROGRAM.......: /DS1/C_BW_ZDS_COPA_RECON
PROGRAM FUNCTION: This Function Module Extracts Cost Center, Company *
Code, and all Amount fields form CE3OP01 table and sectaktbo "
* Current profitability segment (CO-PA) *
paobjnr " Profitability Segment Number (CO-PA) *
pasubnr " Profitability segment changes (CO-PA) *
bukrs " Company Code
kndnr " Customer from CE4Op01 table. *
Segrigate one record from CE3Op01 into 93 based on Value fields. *
PROGRAM TYPE..Function Module *
DEV. CLASS..../DS1/MI_01 *
LOGICAL DB.... N/A *
Conventions used in the Program *
* global variables --> g_* *
* local variables --> l_* *
* constants --> c_* *
* internal tables --> t_* *
* structures --> x_* *
* parameters --> p_* *
* select-options --> s_* *
* ranges --> r_* *
* workarea --> w_* *
* field symbol --> fs_* *
Declaration for Interface: Selection criteria
STATICS: s_s_if TYPE srsc_s_if_simple,
Maximum number of lines for DB table
ls_s_if TYPE srsc_s_if_simple, "Static Structure
counter
ls_counter_datapakid LIKE sy-tabix,"Static Counter
cursor
ls_cursor TYPE cursor,"Static Cursor.
ls_cursor1 TYPE cursor."Static Cursor.
*CONSTANTS
CONSTANTS: lc_datasource TYPE char14 VALUE 'ZDS_COPA_RECON',
" Data Source Name
lc_msgtype TYPE char1 VALUE 'E', "message type
lc_msgcls TYPE char2 VALUE 'R3', "message class
lc_msgnum TYPE char3 VALUE '009',"Message Number.
lc_001 TYPE char3 VALUE '001',
lc_b0 TYPE char2 VALUE 'B0',
lc_10 TYPE char2 VALUE '10',
lc_01 TYPE char2 VALUE '01',
lc_02 TYPE char2 VALUE '02',
lc_1 TYPE sy-tabix VALUE 1.
*Data Declaration.
DATA: lt_ce3op01 TYPE STANDARD TABLE OF x_ce3op01,
" Internal table for ce3op01
lt_ce3op02 TYPE STANDARD TABLE OF x_ce3op01,
lt_ce4op01 TYPE STANDARD TABLE OF x_ce4op01,
" Internal table for ce4op01
lw_ce3op01 TYPE x_ce3op01,
" Work area for ce3op01
lw_ce3op02 TYPE x_ce3op01, "MOD-002
lw_ce4op01 TYPE x_ce4op01,
" Work area for ce4op01
lw_e_t_data TYPE /ds1/fi_copa_recn,
" Work area for /ds1/fi_copa_recn.
*CE1op01
lt_ce1op01 TYPE STANDARD TABLE OF x_ce1op01,"Internaltable
lw_ce1op01 TYPE x_ce1op01,"Work area for CE1op01.
**CE1op01
lt_fldlist TYPE STANDARD TABLE OF lx_fldlist, "fields list
lw_fldlist TYPE lx_fldlist," FIELDS list work area
lt_flnmval TYPE STANDARD TABLE OF lx_flnmval,"table for splitting
lw_flnmval TYPE lx_flnmval,"work area for spilitting
l_index TYPE i VALUE 1, "to keep track of index.
l_len TYPE i,
l_s_no_recs TYPE sy-tabix VALUE 99,
l_s_loop_from TYPE sy-tabix, "from "MOD-002
l_s_loop_to TYPE sy-tabix, "to"MOD-002
l_norecs TYPE sy-tabix, "MOD-002
l_count TYPE sy-tabix. "MOD-002
*Field Symbols.
FIELD-SYMBOLS:
<fs_flnmval> TYPE lx_flnmval."Field symbol for fild values
Selection Ranges
RANGES: lr_bukrs FOR ce4op01-bukrs, " Range for company code
lr_versi FOR ce3op01-versi," Range for version
lr_paledger FOR ce3op01-paledger,"Range for paledger
lr_vrgar FOR ce3op01-vrgar,"Range for vrgar
lr_gjahr FOR ce3op01-gjahr,"Range for Fiscal year
lr_perbl FOR ce3op01-perbl."Range for perbl
Initialization mode (first call by SAPI) or data transfer mode
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
IF ls_counter_datapakid = 0.
CASE i_dsource.
WHEN lc_datasource.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF. "#EC *
this is a typical log call. Please write every error message like this
log_write lc_msgtype "'E' "message type
lc_msgcls "'R3' "message class
lc_msgnum "'009' "message number
i_dsource "message variable 1
' '. "message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_s_if-t_select.
APPEND LINES OF i_t_fields TO s_s_if-t_fields.
Fill parameter buffer for data extraction calls
ls_s_if-requnr = i_requnr.
ls_s_if-dsource = i_dsource.
ls_s_if-maxsize = i_maxsize.
ls_s_if-initflag = i_initflag.
Company Code
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_bukrs.
MOVE: i_t_select-sign TO lr_bukrs-sign,
i_t_select-option TO lr_bukrs-option,
i_t_select-low TO lr_bukrs-low,
i_t_select-high TO lr_bukrs-high.
APPEND lr_bukrs.
ENDLOOP.
*Version (0)
*SRSC_S_IF_SIMPLE-T_SELECT
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_versi.
LOOP AT i_t_select INTO s_s_if-t_select WHERE fieldnm = c_versi.
MOVE: i_t_select-sign TO lr_versi-sign,
i_t_select-option TO lr_versi-option,
i_t_select-low TO lr_versi-low,
i_t_select-high TO lr_versi-high.
APPEND lr_versi.
ENDLOOP.
*Currency Type (company code only)
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_paledger.
MOVE: i_t_select-sign TO lr_paledger-sign,
i_t_select-option TO lr_paledger-option.
IF i_t_select-low = lc_b0.
MOVE lc_01 TO lr_paledger-low.
ELSEIF i_t_select-low = lc_10.
MOVE lc_02 TO lr_paledger-low.
ENDIF.
APPEND lr_paledger.
ENDLOOP.
*Record Type
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_vrgar.
MOVE: i_t_select-sign TO lr_vrgar-sign,
i_t_select-option TO lr_vrgar-option,
i_t_select-low TO lr_vrgar-low,
i_t_select-high TO lr_vrgar-high.
APPEND lr_vrgar.
ENDLOOP.
*Fiscal Year
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_gjahr.
MOVE: i_t_select-sign TO lr_gjahr-sign,
i_t_select-option TO lr_gjahr-option,
i_t_select-low TO lr_gjahr-low,
i_t_select-high TO lr_gjahr-high.
APPEND lr_gjahr.
ENDLOOP.
*Period Block/Year
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_perbl.
MOVE: i_t_select-sign TO lr_perbl-sign,
i_t_select-option TO lr_perbl-option,
i_t_select-low TO lr_perbl-low,
i_t_select-high TO lr_perbl-high.
APPEND lr_perbl.
ENDLOOP.
*Value Field Name.
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_fldnm.
MOVE:
i_t_select-sign TO gr_zfldnm-sign,
i_t_select-option TO gr_zfldnm-option,
i_t_select-low TO gr_zfldnm-low,
i_t_select-high TO gr_zfldnm-high.
APPEND gr_zfldnm.
ENDLOOP.
First data package -> OPEN CURSOR
IF ls_counter_datapakid = 0.
*Create 93 Field names in an internal table.
MOVE 'VV010' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV011' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV012' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV013' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV014' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV015' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV016' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV020' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV021' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV030' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV031' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV032' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV033' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV034' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV035' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV200' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV201' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV202' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV203' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV036' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV037' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV038' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV039' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV040' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV041' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV042' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV043' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV204' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV205' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV211' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV212' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV213' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV222' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV223' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV230' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV232' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV233' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV500' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV501' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV502' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV503' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV504' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV505' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV506' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV507' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV508' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV509' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV510' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV511' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV512' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV513' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV514' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV515' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV516' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV517' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV518' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV519' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV520' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV236' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV206' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV051' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV052' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV053' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV054' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV055' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV056' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV057' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV058' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV059' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV060' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV241' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV242' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV243' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV244' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV245' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV246' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV247' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV248' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV249' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV250' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV521' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV522' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV523' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV524' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV525' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV526' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV527' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV528' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV529' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV530' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV227' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV226' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV224' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
OPEN CURSOR WITH HOLD ls_cursor FOR
SELECT
paobjnr " Profitability Segment Number (CO-PA)
paledger " Currency type for an operating concern
vrgar " Record Type
versi " Plan version (CO-PA)
gjahr " Fiscal Year
perbl " Fiscal year/period block
pasubnr
vv010001 " List Price
vv011001 " Formula Price
vv012001 " Customer Price
vv013001 " Manual Price
vv014001 " Retail Pump Price
vv015001 " Markup
vv016001 " Net Proceeds Other
vv020001 " Excise Duty Offset
vv021001 " Duties & Government
vv030001 " Sales Discounts
vv031001 " Sales Surcharges
vv032001 " Sales Rebates
vv033001 " Agents Comm Paid
vv034001 " RBA CR Royalties
vv035001 " Other Revenues
vv200001 " Transfer PriceSupply
vv201001 " Prim Tran Tariff Sup
vv202001 " S&Handling TariffDis
vv203001 " Sec Trans Tariff Dis
vv036001 " Proceeds from Servic
vv037001 " Exchanges
vv038001 " Throughput fees
vv039001 " Output Tax Offset
vv040001 " CR comm & Oth Oil Pr
vv041001 " Supplier fees
vv042001 " RBA Fairshare Adjust
vv043001 " Contr Comm Paid IG
vv204001 " Sec Tran Tariff Supp
vv205001 " Comp Stock Obligatio
vv211001 " Prim Tran Tar Transf
vv212001 " S&Handling Tar Trans
vv213001 " Sec Trans TariffTran
vv222001 " DIS:S&Handl Tar OvUn
vv223001 " DIS:Sec Tr TarifOvUn
vv230001 " Transfer Price LSC
vv232001 " S&Handling Tar LSC
vv233001 " Sec Trans Tariff LSC
vv500001 " 3rd Party Purchases
vv501001 " Transf from Oth Sect
vv502001 " Purchases IG
vv503001 " Inter-Seg Transf Pur
vv504001 " Import Freight
vv505001 " Stock Variations
vv506001 " Other Product Cost
vv507001 " Pipeline Operat Exp
vv508001 " Primary Transp Expen
vv509001 " Manufacturing Expens
vv510001 " Supply /Process Exp
vv511001 " MK Processing Plants
vv512001 " S&Handling Expenses
vv513001 " Sec Transp Expenses
vv514001 " Point of Sale Expens
vv515001 " Contr Comm Rec IG
vv516001 " Assoc Inc Dividend
vv517001 " Marketing & Sell Exp
vv518001 " Other Rev from Dist
vv519001 " Other Rev Transferrd
vv520001 " Stock Write-Off
vv236001 " Oth cost Tar LSC SMP
vv206001 " Prim Trp tariff Dist
vv051001 " CR Net Turnover
vv052001 " Dummy Price 2
vv053001 " Dummy Price 3
vv054001 " Dummy Price 4
vv055001 " Dummy Price 5
vv056001 " Dummy Price 6
vv057001 " Dummy Price 7
vv058001 " Dummy Price 8
vv059001 " Dummy Price 9
vv060001 " Dummy Price10
vv241001 " DummyTariff 1
vv242001 " DummyTariff 2
vv243001 " DummyTariff 3
vv244001 " DummyTariff 4
vv245001 " DummyTariff 5
vv246001 " DummyTariff 6
vv247001 " DummyTariff 7
vv248001 " DummyTariff 8
vv249001 " DummyTariff 9
vv250001 " DummyTariff10
vv521001 " SD&A Rebates
vv522001 " Dummy Cost 2
vv523001 " Dummy Cost 3
vv524001 " Dummy Cost 4
vv525001 " Dummy Cost 5
vv526001 " Dummy Cost 6
vv527001 " Dummy Cost 7
vv528001 " Dummy Cost 8
vv529001 " Dummy Cost 9
vv530001 " Dummy Cost 10
vv227001 " Sec Tr TarifOvUn LSC
vv226001 " S&Handl Tar OvUn LSC
vv224001 " Pr Tra TariffOvU DIS
FROM ce3op01
WHERE paledger = lc_02 AND
vrgar IN lr_vrgar AND
versi IN lr_versi AND
perbl IN lr_perbl AND
gjahr IN lr_gjahr.
ENDIF.
For all other cursors.
FETCH NEXT CURSOR ls_cursor
APPENDING TABLE lt_ce3op02
PACKAGE SIZE ls_s_if-maxsize.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT lt_ce3op02 BY paobjnr pasubnr paledger vrgar versi gjahr
perbl.
DELETE ADJACENT DUPLICATES FROM lt_ce3op02 COMPARING paobjnr.
*Begin of MODE-002
DESCRIBE TABLE lt_ce3op02 LINES l_norecs.
l_s_loop_from = lc_1.
DO.
l_s_loop_to = l_s_loop_from + l_s_no_recs.
LOOP AT lt_ce3op02 INTO lw_ce3op02
FROM l_s_loop_from TO l_s_loop_to .
APPEND lw_ce3op02 TO lt_ce3op01.
ENDLOOP.
SORT lt_ce3op01 BY paobjnr.
*End of MOS-002
SELECT
aktbo " Current profitability segment (CO-PA)
paobjnr " Profitability Segment Number (CO-PA)
pasubnr " Profitability segment changes (CO-PA)
kndnr " Customer
artnr
bukrs " Company Code
prctr
kokrs
FROM ce4op01
INTO TABLE lt_ce4op01
FOR ALL ENTRIES IN lt_ce3op01
WHERE paobjnr = lt_ce3op01-paobjnr AND
pasubnr = lt_ce3op01-pasubnr AND
bukrs IN lr_bukrs.
*CE1op01
SELECT
paledger
vrgar
versi
perio
paobjnr
pasubnr
belnr
posnr
rbeln
rposn
FROM ce1op01
INTO TABLE lt_ce1op01
FOR ALL ENTRIES IN lt_ce3op01
WHERE paledger = lt_ce3op01-paledger AND
vrgar = lt_ce3op01-vrgar AND
versi = lt_ce3op01-versi AND
perio = lt_ce3op01-perbl AND
paobjnr = lt_ce3op01-paobjnr AND
pasubnr = lt_ce3op01-pasubnr.
**CE1op01
LOOP AT lt_ce3op01 INTO lw_ce3op01.
MOVE:
lw_ce3op01-paobjnr TO lw_flnmval-paobjnr,
lw_ce3op01-paledger TO lw_flnmval-paledger,
lw_ce3op01-vrgar TO lw_flnmval-vrgar,
lw_ce3op01-versi TO lw_flnmval-versi,
lw_ce3op01-gjahr TO lw_flnmval-gjahr,
lw_ce3op01-perbl TO lw_flnmval-perbl.
*appending all 93 fields as records
MOVE lw_ce3op01-vv010001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv011001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv012001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv013001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv014001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv015001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv016001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv020001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv021001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv030001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv031001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv032001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv033001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv034001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv035001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv200001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv201001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv202001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv203001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv036001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv037001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv038001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv039001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv040001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv041001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv042001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv043001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv204001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv205001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv211001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv212001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv213001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv222001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv223001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv230001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv232001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv233001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv500001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv501001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv502001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv503001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv504001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv505001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv506001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv507001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv508001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv509001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv510001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv511001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv512001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv513001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv514001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv515001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv516001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv517001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv518001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv519001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv520001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv236001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv206001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv051001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv052001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv053001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv054001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv055001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv056001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv057001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv058001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv059001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv060001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv241001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv242001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv243001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv244001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv245001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv246001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv247001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv248001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv249001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv250001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv521001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv522001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv523001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv524001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv525001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv526001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv527001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv528001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv529001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv530001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv227001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv226001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv224001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
*Segrigating all one record into 102 records is complete
ENDLOOP.
LOOP AT lt_flnmval ASSIGNING <fs_flnmval>.
IF l_index > 93.
l_index = 1.
ENDIF.
READ TABLE lt_fldlist INTO lw_fldlist INDEX l_index.
IF sy-subrc = 0.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lw_fldlist-fldnam
IMPORTING
output = <fs_flnmval>-fldnam.
ENDIF.
l_index = l_index + 1.
ENDLOOP.
SORT lt_ce4op01 BY paobjnr.
SORT lt_ce1op01 BY paobjnr paledger vrgar versi.
SORT gr_zfldnm BY low.
DELETE lt_flnmval WHERE fldnam NOT IN gr_zfldnm.
LOOP AT lt_flnmval INTO lw_flnmval.
READ TABLE lt_ce4op01 INTO lw_ce4op01 WITH KEY
paobjnr = lw_flnmval-paobjnr BINARY SEARCH.
IF sy-subrc = 0.
MOVE : lw_flnmval-paledger TO lw_e_t_data-paledger,
lw_flnmval-vrgar TO lw_e_t_data-vrgar,
lw_flnmval-versi TO lw_e_t_data-versi ,
lw_flnmval-gjahr TO lw_e_t_data-gjahr,
lw_flnmval-perbl TO lw_e_t_data-perbl,
lw_ce4op01-bukrs TO lw_e_t_data-bukrs,
lw_ce4op01-kndnr TO lw_e_t_data-kndnr,
lw_ce4op01-artnr TO lw_e_t_data-artnr,
lw_ce4op01-prctr TO lw_e_t_data-prctr,
lw_ce4op01-kokrs TO lw_e_t_data-kokrs,
lw_flnmval-fldnam TO lw_e_t_data-zfldnm,
lw_flnmval-zamunt TO lw_e_t_data-zamount.
CE1op01
READ TABLE lt_ce1op01 INTO lw_ce1op01 WITH KEY
paobjnr = lw_flnmval-paobjnr
paledger = lw_flnmval-paledger
vrgar = lw_flnmval-vrgar
versi = lw_flnmval-versi BINARY SEARCH.
IF sy-subrc = 0.
MOVE: lw_ce1op01-rbeln TO lw_e_t_data-rbeln,
lw_ce1op01-rposn TO lw_e_t_data-rposn.
ENDIF.
CE1op01
APPEND lw_e_t_data TO gt_out_data.
ENDIF.
ENDLOOP.
*Begin of MOD-002
FREE lt_flnmval.
REFRESH :lt_ce3op01,lt_ce4op01,lt_ce1op01.
e_t_data[] = gt_out_data[].
DELETE e_t_data WHERE zfldnm NOT IN gr_zfldnm.
l_s_loop_from = l_s_loop_to + lc_1.
l_count = l_count + 20.
IF l_count GE l_norecs.
EXIT.
ENDIF.
ENDDO.
*End of MOD-002
ls_counter_datapakid = ls_counter_datapakid + 1.
ENDIF. "IF S_COUNTER_DATAPAKID = 0
ELSE.
IF i_maxsize IS INITIAL.
RAISE error_passed_to_mess_handler.
ENDIF.
IF g_start IS INITIAL.
g_start = 1.
ELSE.
g_start = g_end + 1.
ENDIF.
g_end = g_start + i_maxsize - 1.
Population of E_T_DATA based on Data records size
APPEND LINES OF gt_out_data FROM g_start TO g_end TO e_t_data.
DELETE e_t_data WHERE zfldnm NOT IN gr_zfldnm.
IF e_t_data[] IS INITIAL.
RAISE no_more_data.
ENDIF.
ls_counter_datapakid = ls_counter_datapakid + 1.
ENDIF.
ENDFUNCTION.
Thanks & regards,
Sreekanth
+91 9740091981Hello Sreekanth,
See this blog [Generic Extraction via Function Module|/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module]
Also see this
[Line Item Level Data Extraction for Financial Accounting and Controlling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a]
Thanks
Chandran -
Oracle Stored Procedure Not Accepting Comma delimited values in database
I have a stored procedure which does the following, declares variables and assigns values retrieved from a parameter temp_table database to each variable, then it reads column headings from a master table. Using the variables assigned to each parameter from the temp_table as a filter, the rows from the MASTER TABLE are finally output by the procedure. The stored procedure works fine when dealing with single value string values passed from the parameter temp_table.
The problem comes in when multiple values are selected and stored in the database parameter field as a comma separated string, eg. A045, A012
So, the strored procedure has been modified to use a function to split the string into separate values: 'A045' and 'A012'. So that: A045, A012 from the database will be returned to the stored procedure variable as *('A045', 'A012')* . When testing the stored procedure using the static values *('A045', 'A012')* , data is returned.
eg. EMPLOYEE_MASTER.CODE IN ('*A045*', '*A012*') will return results
However, when *('A045', 'A012')* is dynamically concatenated from the function and assigned to variable:
paramCode := split_str(paramCode) with paramCode eventually being passed: *('A045', 'A012')*
to become:
EMPLOYEE_MASTER.CODE IN (paramCode)
then NO DATA is returned.
I am stuck and don't know what the problem is. If anyone has any ideas, please feel free to help. I have included the Actual Stored Procedure below for a better understanding.
--------------------------------------------- STORED PROCEDURE-------------------------------------------------------
create or replace
PROCEDURE GETEMPLOYEEDATA
( sesId IN VARCHAR2,
l_cursor in out sys_refcursor
) is
compCode varchar(200);
businessUnit varchar(200);
locCode varchar(200);
hrDeptID varchar(200);
glDept varchar(200); plat varchar(200);
deptFunc varchar(200); empType varchar(200);
unionCode varchar(200); jobCode varchar(200);
careerLvl varchar(200);
empStatus varchar(200);
zid varchar(200);
superID varchar(200);
counter varchar(200) ;
token_index number;
--v_errm VARCHAR2(256);
BEGIN
dbms_output.put_line('Start of BEGIN');
/* Counter to get number of Unique Employee ID based on valid Session ID */
select count(*) into counter from XXCCHRWEB.hr_web_sessionid_tmp where parameter_20=sesId;
open l_cursor for SELECT counter EMPLOYEE_ID, '' LAST_NAME,
'' FIRST_NAME from dual;
dbms_output.put_line('OPENING FIRST CURSOR');
/* If no valid session ID returned then error gently */
if counter=0 then
open l_cursor for SELECT '' EMPLOYEE_ID, '' LAST_NAME,
'' FIRST_NAME,'' MIDDLE_NAME,'' NAME,
'' EMPLOYEE_TYPE, '' COMPANY, '' COMPANY_DESCRIPTION,
'' BUSINESS_UNIT, '' BUSINESS_UNIT_DESCRIPTION, '' LOCATION,
'' LOCATION_NAME, '' HR_DEPARTMENT_ID,'' DEPARTMENT_NAME,
'' DEPARTMENT_FUNCTION, '' PLATFORM, '' JOB_CODE,
'' JOB_TITLE, '' BUSINESS_TITLE, '' MANAGER_LEVEL,
'' JOB_FUNCTION, '' GL_DEPARTMENT_ID, '' GL_OP_UNIT,
'' GL_RESPONSIBILITY_CENTER, '' HR_CHANNEL,'' FULL_OR_PART_TIME,
'' REGULAR_OR_TEMP, '' GRADE,'' UNION_CODE,
'' BARGAINING_UNIT, '' ANNUAL_RATE,'' HOURLY_RATE,
'' HIRE_DATE, '' BIRTH_DATE, '' REHIRE_DATE,
'' SERVICE_DATE, '' POSITION_NUMBER, '' REPORTS_TO,
'' REPORTS_TO_TITLE, '' SUPERVISOR_ID, '' SUPERVISOR_NAME,
'' LAN_ID from dual;
dbms_output.put_line('End of counter=0');
-- return;
end if;
/* read from hr_web_sessionid_tmp */
select
parameter_1,parameter_2, parameter_3, parameter_4,
parameter_5,parameter_6, parameter_7, parameter_8,
parameter_9,parameter_10, parameter_11, parameter_12,
parameter_13, parameter_14
into
compCode, businessUnit, locCode, hrDeptID,
glDept, plat, deptFunc, empType,
unionCode, jobCode, careerLvl, empStatus,
zid, superID
from
XXCCHRWEB.hr_web_sessionid_tmp
where
parameter_20= sesId;
/*Assigning All Value to NULL superID*/
IF superid is null then
superID:= 'All';
END IF;
jobCode:='('''|| get_token(jobCode, 1)||''')'||','||'('''|| get_token(jobCode, 2)||''')';
dbms_output.put_line('SELECTING PARAMETERS FROM TEMP TABLE WITH ROW COUNT : '||l_cursor%ROWCOUNT);
/* read from Employee Master */
open l_cursor for SELECT DISTINCT * FROM ( SELECT HR_EMPLOYEE_MASTER.EMPLOYEE_ID, HR_EMPLOYEE_MASTER.LAST_NAME,
HR_EMPLOYEE_MASTER.FIRST_NAME, HR_EMPLOYEE_MASTER.MIDDLE_NAME, HR_EMPLOYEE_MASTER.NAME,
HR_EMPLOYEE_MASTER.EMPLOYEE_TYPE, HR_EMPLOYEE_MASTER.COMPANY, HR_EMPLOYEE_MASTER.COMPANY_DESCRIPTION,
HR_EMPLOYEE_MASTER.BUSINESS_UNIT, HR_EMPLOYEE_MASTER.BUSINESS_UNIT_DESCRIPTION, HR_EMPLOYEE_MASTER.LOCATION,
HR_EMPLOYEE_MASTER.LOCATION_NAME, HR_EMPLOYEE_MASTER.HR_DEPARTMENT_ID, HR_EMPLOYEE_MASTER.DEPARTMENT_NAME,
HR_EMPLOYEE_MASTER.DEPARTMENT_FUNCTION, HR_EMPLOYEE_MASTER.PLATFORM, HR_EMPLOYEE_MASTER.JOB_CODE,
HR_EMPLOYEE_MASTER.JOB_TITLE, HR_EMPLOYEE_MASTER.BUSINESS_TITLE, HR_EMPLOYEE_MASTER.MANAGER_LEVEL,
HR_EMPLOYEE_MASTER.JOB_FUNCTION, HR_EMPLOYEE_MASTER.GL_DEPARTMENT_ID, HR_EMPLOYEE_MASTER.GL_OP_UNIT,
HR_EMPLOYEE_MASTER.GL_RESPONSIBILITY_CENTER, HR_EMPLOYEE_MASTER.HR_CHANNEL, HR_EMPLOYEE_MASTER.FULL_OR_PART_TIME,
HR_EMPLOYEE_MASTER.REGULAR_OR_TEMP, HR_EMPLOYEE_MASTER.GRADE, HR_EMPLOYEE_MASTER.UNION_CODE,
HR_EMPLOYEE_MASTER.BARGAINING_UNIT, HR_EMPLOYEE_MASTER.ANNUAL_RATE, HR_EMPLOYEE_MASTER.HOURLY_RATE,
HR_EMPLOYEE_MASTER.HIRE_DATE, HR_EMPLOYEE_MASTER .BIRTH_DATE, HR_EMPLOYEE_MASTER.REHIRE_DATE,
HR_EMPLOYEE_MASTER.SERVICE_DATE, HR_EMPLOYEE_MASTER.POSITION_NUMBER, HR_EMPLOYEE_MASTER.REPORTS_TO,
HR_EMPLOYEE_MASTER.REPORTS_TO_TITLE, HR_EMPLOYEE_MASTER.SUPERVISOR_ID, HR_EMPLOYEE_MASTER.SUPERVISOR_NAME, HR_EMPLOYEE_MASTER.GENDER,
HR_EMPLOYEE_MASTER_1.LAN_ID
FROM
(XXCCHR.HR_EMPLOYEE_MASTER HR_EMPLOYEE_MASTER_1
LEFT OUTER JOIN
XXCCHR.HR_DEPARTMENT_SECURITY HR_DEPARTMENT_SECURITY
ON
HR_EMPLOYEE_MASTER_1.EMPLOYEE_ID=HR_DEPARTMENT_SECURITY.EMPLOYEE_ID)
LEFT OUTER JOIN
XXCCHR.HR_EMPLOYEE_MASTER HR_EMPLOYEE_MASTER
ON
-- HR_DEPARTMENT_SECURITY.DEPARTMENT_SECURITY=HR_EMPLOYEE_MASTER.HR_DEPARTMENT_ID
(HR_DEPARTMENT_SECURITY.DEPARTMENT_SECURITY=HR_EMPLOYEE_MASTER.HR_DEPARTMENT_ID
or
HR_DEPARTMENT_SECURITY.DEPARTMENT_SECURITY in ('DPALL','DPCAG009'))
WHERE
HR_EMPLOYEE_MASTER_1.LAN_ID=upper(zid) and
(compCode = 'All' or HR_EMPLOYEE_MASTER.COMPANY IN compCode)
(jobCode = 'All' or HR_EMPLOYEE_MASTER.JOB_CODE IN (jobCode) ) ) ;
dbms_output.put_line('END OF SELECT for counter number : ' || counter ||' Cursor row count : '|| l_cursor%ROWCOUNT || ' with Job Code : ' || (jobCode));
dbms_output.put_line('Company Code is:' || compCode);
COMMIT;
dbms_output.put_line('Data has been Output with session id:' || sesId);
--delete from XXCCHRWEB.hr_web_sessionid_tmp where parameter_20= sesId;
dbms_output.put_line('Data should have been DELETED, please check the session temp table');
commit;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('AN EXCEPTION HAS BEEN CAUGHT for counter number : ' || counter ||' Cursor row count : '|| l_cursor%ROWCOUNT || ' from session id : ' || sesId);
dbms_output.put_line('The error code is ' || SQLERRM);
END GETEMPLOYEEDATA;
Edited by: user10384134 on Nov 4, 2009 8:37 AMThis seems to work for me:
define param="'ABC','XYZ'"; --- Set up a test in clause
--- Test data
with test as
(select 'ABC' fld from dual union all
select 'DEF' from dual union all
select 'PQR' from dual union all
select 'XYZ' from dual)
--- Query starts here.
select fld
from test,
table (sys.ODCIVarchar2List (¶m)) p
where fld = p.column_valueOr Using an actual "IN" clause:
define param="'ABC','XYZ'";
with test as
(select 'ABC' fld from dual union all
select 'DEF' from dual union all
select 'PQR' from dual union all
select 'XYZ' from dual
p as
(select column_value from table (sys.ODCIVarchar2List (¶m))
select fld
from test
where fld in (select column_value from p)Edited by: AlanWms on Nov 4, 2009 9:08 AM -
Hi all,
i'm creating a FM extractor, and in the end of the program i append all the data to table e_t_data
and it's o.k. .
the Problem is that when i check the DataSource in RSA3 I Dont Get any data.
What can be the problem?
RegardsHi
This is My Code:
FUNCTION zdc_sales_person.
*"*"Local Interface:
*" IMPORTING
*" REFERENCE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" REFERENCE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" REFERENCE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" REFERENCE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" REFERENCE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS
*" E_T_DATA STRUCTURE ZDC_SALES_PERSON OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
*maximum number of lines for DB table
STATICS: s_s_if TYPE srsc_s_if_simple,s_counter_datapakid LIKE sy-tabix,s_cursor TYPE cursor.
*counter
*cursor
DATA:first_per TYPE char1.
* Initialization mode (first call by SAPI) or data transfer mode
* (following calls) ?
IF i_initflag = sbiwa_c_flag_on.
* Initialization: check input parameters
* buffer input parameters
* prepare data selection
* The input parameter I_dataPAKID is not supported yet !
* check for supported update mode and InfoSource validity
IF i_dsource EQ 'ZDC_SALES_MEN_DESCRPTION'.
CLEAR s_counter_datapakid.
ENDIF.
IF s_counter_datapakid = 0.
FREE: zdc_sales_person.
SELECT DISTINCT pernr parvw
FROM vbpa
INTO CORRESPONDING FIELDS OF TABLE it_vbpa
WHERE parvw LIKE 'Y%'
AND posnr = '000000'.
SORT it_vbpa BY pernr.
DELETE ADJACENT DUPLICATES FROM it_vbpa COMPARING pernr.
SELECT *
FROM pa0002
INTO CORRESPONDING FIELDS OF TABLE emp_name
FOR ALL ENTRIES IN it_vbpa
WHERE pernr = it_vbpa-pernr
AND begda LE sy-datum
AND endda GE sy-datum.
LOOP AT it_vbpa ASSIGNING <fs_vbpa> .
READ TABLE emp_name INTO wa_emp_name WITH KEY pernr = <fs_vbpa>-pernr.
IF sy-subrc = 0.
CONCATENATE wa_emp_name-vorna wa_emp_name-nachn
INTO <fs_vbpa>-sales_men_name SEPARATED BY space.
CLEAR : wa_emp_name.
ENDIF.
ENDLOOP.
APPEND LINES OF it_vbpa TO zdc_sales_person.
*removing duplicates
*first we sort it that the duplicates lines will be together and than delete
*removing double lines
DELETE ADJACENT DUPLICATES FROM zdc_sales_person.
*counting the lines
DESCRIBE TABLE zdc_sales_person LINES tabix_all_max.
ENDIF.
* IF g_counter_datapakid = 0.
tabix_all_from = 1 + ( s_counter_datapakid * i_maxsize ) .
* ENDIF. "First data package ?
*for the lines counting
IF tabix_all_from > tabix_all_max.
RAISE no_more_data.
ENDIF.
tabix_all_to = tabix_all_from + i_maxsize - 1." + ( s_counter_datapakid * i_maxsize ).
IF tabix_all_to > tabix_all_max.
tabix_all_to = tabix_all_max.
ENDIF.
CLEAR: e_t_data, e_t_data[].
APPEND LINES OF zdc_sales_person FROM tabix_all_from TO tabix_all_to TO e_t_data.
tabix_all_from = tabix_all_to + 1.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF.
APPEND LINES OF zdc_sales_person FROM tabix_all_from TO tabix_all_to TO e_t_data.
ENDFUNCTION.
Best Regards -
I'm moving some code from java to the database and found an usual problem, a balance type statement (also known as "balls-into-bins") where the goal is to have the counts as closely balanced as possible. I wanted to ask if someone knew of a more efficient way to do this.
Example:
CREATE TABLE assignment (person_pk number, ticket_pk number);
CREATE TABLE person (person_pk number);
CREATE TABLE ticket (ticket_pk number);
BEGIN
FOR i in 1..5 LOOP
INSERT INTO person VALUES (i);
END LOOP;
FOR i in 1..200 LOOP
INSERT INTO ticket VALUES (i);
END LOOP;
FOR i in 1..100 LOOP
INSERT INTO assignment VALUES (dbms_random.value(1,5),i);
END;
/The goal is to insert the remaining 101-200 rows from ticket such that the difference in counts is as small as possible:
SELECT person_pk,COUNT(*) FROM assignment,GROUP BY person_pk;
E.g. an optimal solution would return:
1,40
2,40
3,40
4,40
5,40
Though this isn't always possible due to the randomness of already existing data.
Attempt at solution is a straight copy from the java code. For each ticket record, find the minimum count(person_pk) and insert that value.
DECLARE
CURSOR person_cnt IS
SELECT p.person_pk FROM assignment a,person p WHERE p.person_pk=a.person_pk(+) GROUP BY p.person_pk ORDER BY COUNT(*);
CURSOR ticket_cur IS
SELECT ticket_pk FROM ticket WHERE ticket_pk NOT IN (SELECT ticket_pk FROM assignment);
v_person_id number;
BEGIN
FOR ticket_rec in ticket_cur LOOP
open person_cnt;
FETCH person_cnt INTO v_person_id;
CLOSE t2_cnt;
INSERT INTO assignment VALUES (v_person_id,ticket_rec.ticket_pk);
END LOOP;
END;
/This suffers from the frequent count(*)s on assignment.
Edited by: 935521 on May 21, 2012 5:31 AM - Converted t1,t2,t3 into more human sounding names: assignment,person,ticketsuch questions should be posted in SQL and PL/SQL forum.
You need rank persons by count of assignments then assign tickets according to rank.
in my example tickets also ranked, but it is only to assign row number.
There also analytic functions dense_rank and row_number that you can use here, you will have to experiment what will work better in your case.
create table person(personid number primary key, name varchar2(30));
create table ticket(ticketid number primary key, name varchar2(30));
create table assignment(ticketid number, personid number, primary key (ticketid, personid) );
insert into person values (1,'A');
insert into person values (2,'B');
insert into person values (3,'C');
insert into ticket values (1,'a');
insert into ticket values (2,'b');
insert into ticket values (3,'c');
insert into assignment values (1,1);
insert into assignment values (2,1);
commit;
with
P as (
select p.personid, count(a.personid) cnt from person p
left outer join assignment a on a.personid=p.personid
where a.personid is null
group by p.personid),
PR as (select personid, rank() over (order by cnt,personid) R from P),
T as (
select t.ticketid, count(a.ticketid) cnt from ticket t
left outer join assignment a on a.ticketid=t.ticketid
where a.ticketid is null
group by t.ticketid),
TR as (select ticketid, rank() over (order by cnt,ticketid) R from T)
select * from PR join TR on PR.R=TR.R; -
How to find total count of records in a cursor
Aassume below is the cursor i defined
cursor c1 is select * from emp;
now, i want to find the total count of records in this cursor using an existing function etc., using one line statement.
FYI: c1%rowcount is always giving 0, so i cant rely on this.
Any thoughts, please share.
Thanks in advance.I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2 v_cnt number := 0;
3 zero_rows exception;
4 begin
5 for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6 loop
7 if v_cnt = 0 then
8 v_cnt := rec.rn;
9 end if;
10 end loop;
11 if v_cnt = 0 then
12 raise zero_rows;
13 end if;
14 exception
15 when zero_rows then
16 dbms_output.put_line('No rows');
17 end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2 v_cnt number := 0;
3 zero_rows exception;
4 begin
5 for rec in (select * from
6 (select rownum rn, e.ename from emp e)
7 order by 1 desc)
8 loop
9 if v_cnt = 0 then
10 v_cnt := rec.rn;
11 dbms_output.put_line(v_cnt);
12 end if;
13 end loop;
14 if v_cnt = 0 then
15 raise zero_rows;
16 end if;
17 exception
18 when zero_rows then
19 dbms_output.put_line('No rows');
20 end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri -
How to count number of rows in a cursor???
I have a cursor and i want to check number of row fetched...But not through rowcount... bcoz it will give after fetching all the rows..
I want to get count as soon as i open the cursor..plz let me knowDavid_Aldridge wrote:
hmmm ... you'd have to wrap the query in an inline view and apply the count(*) over() in the main query I guess.Still will not cover all cases:
Session 1:
update emp set deptno = deptno where deptno = 20
5 rows updated.
SQL> Session 2:
select ename,
count(*) over()
from emp
for update
skip locked
ENAME COUNT(*)OVER()
ALLEN 14
WARD 14
MARTIN 14
BLAKE 14
CLARK 14
KING 14
TURNER 14
JAMES 14
MILLER 14
9 rows selected.Now try to wrap the above query in an inline view :).
SY. -
please help me with the function to count the number of rows in a cursor.
You can use %ROWCOUNT attribute as follows:
DECLARE
CURSOR C IS
SELECT 1 FROM DUAL;
BEGIN
FOR R IN C LOOP
DBMS_OUTPUT.Put_Line('%ROWCOUNT = ' || C%ROWCOUNT);
END LOOP;
END;
but if you want to have number of rows in a cursor BEFORE you fetch any rows from it - then sorry, no way. You can't have number of rows before you physically count them, i.e. read them from the disk in the first place. Think of tables with billions of rows...
file:///D:/Oracle10g_Docs/B12037_01/appdev.101/b10807/06_ora.htm#sthref800 -
How to get the total count of the no. or rows a cursor has fetched
Hi All,
Is there a way to get the number of rows a cursor query has fetched, without looping into the cursor and using a counter variable
I mean like in pl/sql table we can directly use the pl/sql table attribute .count is there a way to achieve this in cursor
thanks a lot in advanceQwerty wrote:
Is there a way to get the number of rows a cursor query has fetched, without looping into the cursor and using a counter variableYes.
It is zero.
On the first loop and first fetch it will be 1, second 2 etc.
This is because cursors have no rows, or fetch no rows until your code or the client uses the cursor to fetch them.
I mean like in pl/sql table we can directly use the pl/sql table attributeA PL/SQL array is not like a cursor, a PL/SQL array has the rows already fetched into it.
A cursor is not an array but a pointer to a compiled SQL statement so you cannot count how many rows it has, because it has none. You can only count how many rows you fetch from it. -
How to determine the cursor record count before the "open cursor"?
Is it possible to determine the record count of an explicit cursor without running a count()? Say, my cursor definition is something like this,
CURSOR cur_vehicle
IS
SELECT os.order_id, os.order_item, vs.part_id
vs.part_num,
vs.iso_num,
vs.model_yr
vs.dealer_cde,
vs.cust_cde,
px.plant_cd
FROM parts_source vs,
orders_source os,
plant_tbl_crossref px
wHERE os.order_id = vs.order_id
AND vs.part_id = os.part_id
AND vs.plant_cde = px.plant_cde
ORDER BY os.order_id;
I want to log the count of records returned by the above cursor prior to the first fetch, without running a count(1) for the query in cursor select.
I know adding " Count(1) over(order by null) " in the cursor SELECT will bring it. But that does not help me log the record count to some log file or table before opening the cursor for processing.
To conclude, my objective is to update the record count of cursor in some table before processingsarvan wrote:
Is it possible to determine the record count of an explicit cursor without running a count()?
..snipped..No. The only way to do it correctly is inside that select.
Each select is a consistent read. Which means that if this is done as 2 select statements, the 1st select can see a different version of the data than the 2nd select statement. does. So if you want a count and that to be consistent and on the same version of the data than the select, it has to be done as part of the select.
Also consider what a cursor is. It is not a result set of sorts that is created in memory upfront - with a convenient interface that tells you the size/number of rows of that result set.
A cursor is basically a program that reads database data as input and produce output. A fetch from a cursor is an instruction for this program to execute and output data.
There's no data set that is created by the cursor from which the count can be determined. The cursor program does have state variables - like +%RowCount+ that specifies how many rows the cursor has thus far output. And you need to run that cursor to the end (no more output) in order to determine the total number of rows output by the cursor. -
Count total of records in a cursor
How I can to Know the total of rows in a cursor whithout pass over all them
do a simple count(1) for the same query as in cursor...
select count(1) into Varible
Clauses of ur cursor;
e.g;
declare
cursor c1 is select * from emp;
a c1%rowtype;
cnt number;
begin
select count(1) into cnt from emp;
--YOUR CURSOR GOES HERE
end;
Riaz -
Getting the count of records in a cursor
Hi,
How can I get the count of records satisfying a conditin in a cursor.
This is the code that I have written. Please tell me where I am going wrong.
declare
cursor c is
select * from Details where Name like 'M%';
rec number;
r c%rowtype;
begin
for r in c
loop
rec:=rec+1;
end loop;
dbms_output.put_line(rec);
end;
Thanks in advanceHi,
You have to initialize the rec variable.
declare
cursor c is
select * from Details where Name like 'M%';
rec number :=0;
r c%rowtype;
begin
for r in c
loop
rec:=rec+1;
end loop;
dbms_output.put_line(rec);
end;
You can also use the %ROWCOUNT attribute.
Regards -
How I can count number of rows in a cursor?. In other words, how I can count how many records set in one cursor
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by quang dau ([email protected]):
How I can count number of rows in a cursor?. In other words, how I can count how many records set in one cursor <HR></BLOCKQUOTE>
Hi
You can use c1%rowcount where c1 is name of cursor.
good luck
Kavita
null
Maybe you are looking for
-
Internet browsing ludicrously slow after upgrading to Mavericks
Hi All, I wonder if someone could possibly offer some suggestions please. Everything was fine and running sweetly on ML. After upgrading to Mavericks, Internet browsing has become ridiculously slow. Safari, Chrome and Firefox all exhibit the same pro
-
Captions under thumbnails in photo album
Hi, I've been trying all sorts of things to get a simple caption under each thumbnail in a photo album. The page is on: http://www.georgeglazer.com/globes/table20/table20inv/table20inv.html This is the code for the thumbnail that I have tried to make
-
After one year and one month of ownership my Ipod mini stopped working: There is No sound. But if I put it on the Itrip adapter it is working...It seems that the jack is not recognizing the headphone anymore. Didnt't dropt it I have: 1) Reseted my Ip
-
USB TV tuner software for OS X?
I just bought a USB TV tuner, and right now I have to boot my Mac Pro into boot camp in order to use it. Is there some kind of software for OS X that I can use so that I don't have to do that? EDIT: I found EyeTV, but I would rather have something t
-
Is there anyway to download your own ringback tone for a Htc Rezound
Is there anyway to download a ringback tone for a Htc Rezound phone? tkemo