Count the ocurrences of a particular word in the log file of content server

Hi all,
How can we achieve this.
Thanks,
Chely

ping.sumit wrote:
Hi
If I have a paragraph in a string, and have to find the occurrences of a particular word. How can I do that.
for example if i have this paragraph in a String, and I have to find the occurrence of the word "the", how can I do that.
...ping.sumit, you've been a (fairly) active member on these forums for almost a year now. Do you really have no idea how to begin solving this problem?

Similar Messages

Severe error in the log file of App Server 8.1 PE

Hi,
I have installed the JWSDP 1.6 with my App Server 8.1 PE and i found an error that i could not solve.
The error message reads "EJB Webservice security configuration Failure com.sun.enterprise.security.jauth.AuthException at com.sun.enterprise.security.jauth.ConfigFile.createModule(ConfigFile.java 350)"
and the stack trace is:
at com.sun.enterprise.security.jauth.ConfigFile.getServerAuthContext(ConfigFile.java:115)
     at com.sun.enterprise.security.jauth.ServerAuthConfig.getAuthContext(ServerAuthConfig.java:98)
     at com.sun.enterprise.security.jauth.ServerAuthConfig.getConfig(ServerAuthConfig.java:64)
     at com.sun.enterprise.webservice.EjbRuntimeEndpointInfo.<init>(EjbRuntimeEndpointInfo.java:81)
     at com.sun.ejb.containers.StatelessSessionContainer.initializeHome(StatelessSessionContainer.java:233)
     at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:287)
     at com.sun.enterprise.server.AbstractLoader.loadEjbs(AbstractLoader.java:477)
     at com.sun.enterprise.server.ApplicationLoader.load(ApplicationLoader.java:125)
     at com.sun.enterprise.server.TomcatApplicationLoader.load(TomcatApplicationLoader.java:95)
     at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:180)
     at com.sun.enterprise.server.ApplicationLifecycle.onStartup(ApplicationLifecycle.java:200)
     at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
     at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
     at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.enterprise.security.jauth.ConfigFile.createModule(ConfigFile.java:331)
     ... 14 more
Caused by: java.lang.RuntimeException: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'xwss:KeyEncryptionMethod'. One of '{"http://java.sun.com/xml/ns/xwss/config":CanonicalizationMethod, "http://java.sun.com/xml/ns/xwss/config":SignatureMethod, "http://java.sun.com/xml/ns/xwss/config":Target, "http://java.sun.com/xml/ns/xwss/config":SignatureTarget}' is expected.
     at com.sun.xml.wss.provider.WssProviderAuthModule.initialize(WssProviderAuthModule.java:122)
     at com.sun.xml.wss.provider.ServerSecurityAuthModule.initialize(ServerSecurityAuthModule.java:45)
     ... 19 more
Caused by: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'xwss:KeyEncryptionMethod'. One of '{"http://java.sun.com/xml/ns/xwss/config":CanonicalizationMethod, "http://java.sun.com/xml/ns/xwss/config":SignatureMethod, "http://java.sun.com/xml/ns/xwss/config":Target, "http://java.sun.com/xml/ns/xwss/config":SignatureTarget}' is expected.
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:236)
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.java:172)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:382)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:316)
     at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportError(XMLSchemaValidator.java:429)
     at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(XMLSchemaValidator.java:3185)
     at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleStartElement(XMLSchemaValidator.java:1831)
     at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.emptyElement(XMLSchemaValidator.java:725)
     at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:322)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1693)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:368)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:834)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:764)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
     at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:250)
     at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292)
     at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:98)
     at com.sun.xml.wss.impl.configuration.SecurityConfigurationXmlReader.parseXmlStream(SecurityConfigurationXmlReader.java:219)
     at com.sun.xml.wss.impl.configuration.SecurityConfigurationXmlReader.parseXmlStream(SecurityConfigurationXmlReader.java:194)
     at com.sun.xml.wss.impl.configuration.SecurityConfigurationXmlReader.createDeclarativeConfiguration(SecurityConfigurationXmlReader.java:252)
     at com.sun.xml.wss.provider.WssProviderAuthModule.initialize(WssProviderAuthModule.java:97)
     ... 20 more
I did not do any configuration setting after JWSDP is installed and i found this error.
Can someone help me please.
Thanks a lot
Lacon

I just realise that there is an enterprise appplication deployed and the setting of configuration > security > message security > soap has the clientProvider and serverProvider activated.
when i turn off the soap security setting, the problem goes away.
sorry about that.
Lacon

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

How to check particular error in alert log file

Hi all,
How to check particular error in alert log file,for supose if i get error in batabase yesterday 4 pm & today i want to check alert log file to get basic idea..it might be a big file so how to check that particular error..
Thanks & regards,
Eswar..

What's your oracle version?
If you are in 11g you can use adrci tool
1- set homes diag/rdbms/orawiss/ORAWISS/ : the rdbms home
2- show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term : to find all the ORA-% errors in the alert file
3- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term : to find all the ORA-% errors in the alert file during the last 51 days,
4- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-1/24 " -term : to find all the ORA-% errors in the alert file during the last hour,
5- show alert -P "MESSAGE_TEXT LIKE '%ORA-12012%' and originating_timestamp > systimestamp-1/24 " -term : to find the particular ORA-12012 error in the alert file during the last hour,
Example:
[oracle@wissem wissem]$ adrci
ADRCI: Release 11.2.0.1.0 - Production on Wed May 4 10:24:54 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
ADR base = "/home/oracle/app/oracle"
adrci> set homes diag/rdbms/orawiss/ORAWISS/
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-'" -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
2010-12-11 19:45:41.289000 +01:00
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/home/oracle/app/oracle/oradata/ORAWISS/system01.dbf'
ORA-1547 signalled during: ALTER DATABASE RECOVER database until time '2011-01-21:10:48:00' ...
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
ORA-12012: error on auto execute of job 29
ORA-01435: user does not exist
2011-03-15 11:39:37.571000 +01:00
opiodr aborting process unknown ospid (31042) as a result of ORA-609
2011-03-15 12:04:15.111000 +01:00
opiodr aborting process unknown ospid (3509) as a result of ORA-609
adrci>
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
2011-03-15 10:19:45.316000 +01:00
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j006_5536.trc:
ORA-12012: error on auto execute of job 26
ORA-01435: user does not exist
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
ORA-12012: error on auto execute of job 29
ORA-01435: user does not exist
2011-03-15 11:39:37.571000 +01:00
opiodr aborting process unknown ospid (31042) as a result of ORA-609
2011-03-15 12:04:15.111000 +01:00
opiodr aborting process unknown ospid (3509) as a result of ORA-609
adrci>

Where to find out the log file under java developer role

Hi,
I have some application created in NWDS. While running it after the PAR deployment and all. some exception is thrown. the exception iD is given. I was trying to find out wher the log files are located in the portal so that I can analyze the exception.
I think it is under the java developer role....but under that......I checked the log viewer tool and all.....but exactly where the log files would be located. so that with the exception ID , I can search and find out the log for the particular exception.
any ideas?
Thanks in advance.

Hi Steelman,
Use the search option in log viewer for this purpose. In the server it would be located in
<i>usr/sap/sid/jc00/cluster/server0/logs</i>
Hope this helps.
Regards
Bharathwaj

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

MAXDB copy log file from one server to the other server.

Hi All,
I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database manager). Please help.
Regards
M.A

Hi,
Basically, the process is of log shipping. Transferring logs from DC to DR system.
For that, you can check HowTo - Standby DB log shipping - MaxDB - SCN Wiki
This is script based. I have not done it but the idea remains the same.
Regards,
Divyanshu

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Bursting Program Ends in Error with nothing in the Log file

Hi All
I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
below is my log file
+---------------------------------------------------------------------------+
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 30-SEP-2013 15:11:15
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 574533
All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
Report Req ID: 574532
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:T1DEVEBSAPP1
Preparing parameters
null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Set Bursting parameters..
Temp. Directory:/tmp
[093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[093013_031118657][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
602
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 30-SEP-2013 15:11:41
+---------------------------------------------------------------------------+
and the output says..
"Error!! Could not deliver the output for Delivery channel:null "
Wondering What might be the issue, any help on this is greatly appreciated.
-Ragul

Ram,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein

Bursting Program Errors Out with nothing in the Log file

Hi All
I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
below is my log file
+---------------------------------------------------------------------------+
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 30-SEP-2013 15:11:15
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 574533
All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
Report Req ID: 574532
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:T1DEVEBSAPP1
Preparing parameters
null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Set Bursting parameters..
Temp. Directory:/tmp
[093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[093013_031118657][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
602
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 30-SEP-2013 15:11:41
+---------------------------------------------------------------------------+
and the output says..
"Error!! Could not deliver the output for Delivery channel:null "
Wondering What might be the issue, any help on this is greatly appreciated.
-Ragul

Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein

How to add a date suffix to the log file name

In Windows, I want to run certain commands and save the output to a logfile every day. How to add a suffix to the log file name so I can distinguish which log file for which day?
e.g. cmd >> logfile.date

AZ wrote:
In Windows, I want to run certain commands and save the output to a logfile every day. How to add a suffix to the log file name so I can distinguish which log file for which day?
e.g. cmd >> logfile.datemy best friend name is "google", refer to this [url | http://stackoverflow.com/questions/203090/how-to-get-current-datetime-on-windows-command-line-in-a-suitable-format-for-usi]
This is what i did
1) created a dummy file in c drive
2) copy pasted below lines, you can play around more with the format
set _my_datetime=%date%_%time%
set _my_datetime=%_my_datetime: =_%
set _my_datetime=%_my_datetime::=%
set _my_datetime=%_my_datetime:/=_%
set _my_datetime=%_my_datetime:.=_%3) Rename the file from dos
ren some.txt dummy_file_%_my_datetime%.txt4) Here goes the output
C:\dir
dummy_file_Mon_09_20_2010_161347_21.txt
Most of the code i copied from above url, you can tweak a little bit based on ur requirement and format.
Regards
Learner

Is there a way to automatically collect the log files from a AirPort or TimeCapsule base station?

Hi there,
the headline says basically all: Is there a way to collect the log files from a Time Capsule 7 AirPort from time to time? They are overwritten quite soon but I want a complete log of all activities to my access point.
The AirPort Utility says something about SNMP. Is this the way to go? Some kind of demon on my Mac that retrieves and saves the logs like every two days?
I want to copy the access logs, I am not interested in Time Machine backup logs.
Thanks.

There is a way to do this via Syslog. On the Logging & Statistics panel (within the AirPort Utility), you can point the AirPort's system logs to a Syslog "server."
This would require a "dedicated" network client to receive the logs.
Unfortunately, setting up a Syslog server is a bit intensive initially, but is simple to operate and maintain.
Please check out this Apple Support Communities thread: Directing Syslog message to a file
ref: Enable an Apple Mac OS machine as a syslog server

Error in Downloading the Text file on Application Server

Hi All,
          I am working on ECC6.0. I have written a program in whcih I am downloading the text file on
          application server in UTF-8 format. However when I am opening this file in Excel I am getting
          garbage value for some characters(as Excel does not support UTF-8 format). So now I
          want to download the data on application server in text file in non unicode format(Like ANSI or
          other non unicode format) which is supported by excel. When I am writing the code as
          OPEN DATASET DN_FILE FOR OUTPUT IN LEGACY TEXT MODE it is giving me dump saying
          CHARACTER CONVERSION FROM CODE PAGE '4102' to CODEPAGE '1100' NOT POSSIBLE.
          Same in case if I add the code OPEN DATASET DN_FILE FOR OUTPUT IN LEGACY TEXT
          MODE CODE PAGE '8000' is also giving dump.
          So please let me know how can I download the file in non unicode format ?
          Any help would be greatly appricated.
Thanks & Regards
Jitendra Gujarathi.

OPEN DATASET l_filename FOR INPUT IN TEXT MODE ENCODING NON-UNICODE IGNORING CONVERSION ERRORS.
CHECK sy-subrc EQ 0.
DO.
    CLEAR wa_file_content.
    READ DATASET l_filename INTO wa_file_content.
    IF sy-subrc EQ 0.
      APPEND wa_file_content TO it_file_content.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
CLOSE DATASET l_filename.
t_filedata[] = it_file_content[].
can you use like this.

Getting the error while transporting the log file

Hi,
I have the primary and physical standby setup on my pc. i want to transport the log file by using the command on primary database
alter system archive current log;
alter system swicth archive logfile;
i am recieving error not able to find the log sequence 15 #.
Thanks
vj0011590

OCI requires a native library.
Native libraries must be in the shared library path of the application (this is a feature of the OS not java.)

Count the ocurrences of a particular word in the log file of content server

Similar Messages

Maybe you are looking for