Severe error in the log file of App Server 8.1 PE

Hi,
I have installed the JWSDP 1.6 with my App Server 8.1 PE and i found an error that i could not solve.
The error message reads "EJB Webservice security configuration Failure com.sun.enterprise.security.jauth.AuthException at com.sun.enterprise.security.jauth.ConfigFile.createModule(ConfigFile.java 350)"
and the stack trace is:
at com.sun.enterprise.security.jauth.ConfigFile.getServerAuthContext(ConfigFile.java:115)
     at com.sun.enterprise.security.jauth.ServerAuthConfig.getAuthContext(ServerAuthConfig.java:98)
     at com.sun.enterprise.security.jauth.ServerAuthConfig.getConfig(ServerAuthConfig.java:64)
     at com.sun.enterprise.webservice.EjbRuntimeEndpointInfo.<init>(EjbRuntimeEndpointInfo.java:81)
     at com.sun.ejb.containers.StatelessSessionContainer.initializeHome(StatelessSessionContainer.java:233)
     at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:287)
     at com.sun.enterprise.server.AbstractLoader.loadEjbs(AbstractLoader.java:477)
     at com.sun.enterprise.server.ApplicationLoader.load(ApplicationLoader.java:125)
     at com.sun.enterprise.server.TomcatApplicationLoader.load(TomcatApplicationLoader.java:95)
     at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:180)
     at com.sun.enterprise.server.ApplicationLifecycle.onStartup(ApplicationLifecycle.java:200)
     at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
     at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
     at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.enterprise.security.jauth.ConfigFile.createModule(ConfigFile.java:331)
     ... 14 more
Caused by: java.lang.RuntimeException: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'xwss:KeyEncryptionMethod'. One of '{"http://java.sun.com/xml/ns/xwss/config":CanonicalizationMethod, "http://java.sun.com/xml/ns/xwss/config":SignatureMethod, "http://java.sun.com/xml/ns/xwss/config":Target, "http://java.sun.com/xml/ns/xwss/config":SignatureTarget}' is expected.
     at com.sun.xml.wss.provider.WssProviderAuthModule.initialize(WssProviderAuthModule.java:122)
     at com.sun.xml.wss.provider.ServerSecurityAuthModule.initialize(ServerSecurityAuthModule.java:45)
     ... 19 more
Caused by: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'xwss:KeyEncryptionMethod'. One of '{"http://java.sun.com/xml/ns/xwss/config":CanonicalizationMethod, "http://java.sun.com/xml/ns/xwss/config":SignatureMethod, "http://java.sun.com/xml/ns/xwss/config":Target, "http://java.sun.com/xml/ns/xwss/config":SignatureTarget}' is expected.
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:236)
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.java:172)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:382)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:316)
     at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportError(XMLSchemaValidator.java:429)
     at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(XMLSchemaValidator.java:3185)
     at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleStartElement(XMLSchemaValidator.java:1831)
     at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.emptyElement(XMLSchemaValidator.java:725)
     at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:322)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1693)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:368)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:834)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:764)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
     at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:250)
     at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292)
     at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:98)
     at com.sun.xml.wss.impl.configuration.SecurityConfigurationXmlReader.parseXmlStream(SecurityConfigurationXmlReader.java:219)
     at com.sun.xml.wss.impl.configuration.SecurityConfigurationXmlReader.parseXmlStream(SecurityConfigurationXmlReader.java:194)
     at com.sun.xml.wss.impl.configuration.SecurityConfigurationXmlReader.createDeclarativeConfiguration(SecurityConfigurationXmlReader.java:252)
     at com.sun.xml.wss.provider.WssProviderAuthModule.initialize(WssProviderAuthModule.java:97)
     ... 20 more
I did not do any configuration setting after JWSDP is installed and i found this error.
Can someone help me please.
Thanks a lot
Lacon

I just realise that there is an enterprise appplication deployed and the setting of configuration > security > message security > soap has the clientProvider and serverProvider activated.
when i turn off the soap security setting, the problem goes away.
sorry about that.
Lacon

Similar Messages

  • Unable to debug the Data Template Error in the Log file

    Hi,
    I am unable to debug the log file error message Please can anybody explain me in detail where the error lies and how to solve the error.The log file shows the following message.
    XDO Data Engine ver 1.0
    Resp: 50554
    Org ID : 204
    Request ID: 2865643
    All Parameters: USER_ID=1318:REPORT_TYPE=Report Only:P_SET_OF_BOOKS_ID=1:TRNS_STATUS=Posted:P_APPROVED=Not Approved:PERIOD=Sep-05
    Data Template Code: ILDVAPDN
    Data Template Application Short Name: CLE
    Debug Flag: Y
    {TRNS_STATUS=Posted, REPORT_TYPE=Report Only, PERIOD=Sep-05, USER_ID=1318, P_SET_OF_BOOKS_ID=1, P_APPROVED=Not Approved}
    Calling XDO Data Engine...
    java.lang.NullPointerException
         at oracle.apps.xdo.dataengine.DataTemplateParser.getObjectVlaue(DataTemplateParser.java:1424)
         at oracle.apps.xdo.dataengine.DataTemplateParser.replaceSubstituteVariables(DataTemplateParser.java:1226)
         at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:398)
         at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:281)
         at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
         at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
         at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:222)
         at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:334)
         at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
         at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:272)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
    Start of log messages from FND_FILE
    Start of After parameter Report Trigger Execution..
    Gl Set of Books.....P
    Organization NameVision Operations
    Entering TRNS STATUS POSTED****** 648Posted
    end of the trns status..687 Posted
    currency_code 20USD
    P_PRECISION 272
    precision 332
    GL NAME 40Vision Operations (USA)
    Executing the procedure get format ..
    ExecutED the procedure get format and the Result..
    End of Before Report Execution..
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 2865643 on node AP615CMR at 28-SEP-2006 07:58:26.
    Post-processing of request 2865643 failed at 28-SEP-2006 07:58:38 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 28-SEP-2006 07:58:38
    Thanks & Regards
    Suresh Singh

    Generally the DBAs are aware of the OPP service log. They can tell you the cause of the problem.
    Anyway, how did you resolve the issue?

  • Type of error in the log file while using using call transaction mode u2018Eu2019

    Hi Gurus,
    Please Answer for this qusetion urgently
    what type of error exactly  you will be seeing in the log file while using call transaction mode u2018Eu2019?
    Thanks/
    Radha.

    Hi,
    Can you be clear.
    In call transaction , no error logs  are created, you have to handle the errors explicitly using the structure BDCMSGCOLL.
    Whenever you use E mode then if the transaction encounters any of the errors i.e. data type mismatching or invalid values etc, it will stop at that screen.
    You can handle the errors in call transaction in the following method.
    create a table using the structure BDCMSGCOLL.
    then
    loop at ......
          CALL TRANSACTION 'XK01' USING I_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO I_MESGTAB.
    endloop.
      SORT I_MESGTAB BY MSGID MSGV1 ASCENDING.
      DELETE ADJACENT DUPLICATES FROM I_MESGTAB.
      LOOP AT I_MESGTAB.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            ID   = I_MESGTAB-MSGID
            LANG = I_MESGTAB-MSGSPRA
            NO   = I_MESGTAB-MSGNR
            V1   = I_MESGTAB-MSGV1
            V2   = I_MESGTAB-MSGV2
            V3   = I_MESGTAB-MSGV3
            V4   = I_MESGTAB-MSGV4
          IMPORTING
            MSG  = MESG1.
        IF I_MESGTAB-MSGTYP = 'S' .
          WA_SUCCMESG-MESG = MESG1.
          APPEND WA_SUCCMESG TO I_SUCCMESG.
    else     IF I_MESGTAB-MSGTYP = 'E' .
          WA_ERRMESG-MESG = MESG1.
          APPEND WA_ERRMESG TO I_ERRMESG.
        ENDIF.
      ENDLOOP.
    Hope this is clear.
    Thanks and Regards.

  • OWB does not store errors in the log files?

    I've specified the log file on the mapping. When I execute the mapping, I see that it does create the log file i specified. However, there are no error logs in the file itself. Is there a step I'm missing. What do I need to do in order for OWB to generate the error codes into the log file?

    The description and instructions for all the different log files and audit records are in this document
    http://otn.oracle.com/products/warehouse/pdf/Cases/case10.pdf
    Nikolai Rochnik

  • Check Event Alert failed with error - No errors in the log file.

    Hi All,
    I am developing a simple event based alert on PO_HEADERS table. I want to send alerts when a PO is created.
    I did all the steps according to the metalink note How To Send An Email In A Simple Periodic Or Event Alert? [ID 1162153.1]
    When i create the PO, the alert is triggering, and Check Event Alert concurrent program is running. But the program completes with error.
    Checking the output file (empty) log file (no errors)
    What can i do here to find out what is the problem? There is nothing in the Alert Manager - History form also. I have kept 7 days as days to keep.
    Thanks!
    M

    Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
    I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
    Thanks,
    Hussein

  • Error in sql_engine_core_inst_Cpu64_1.log file for SQL Server 2012

    I was running SQL Server 2012 in Win 7 64 bit OS. Some how I found SQLSERVER server is not running and I was not able to run the service. Then I tried to unisntall and install again. And I found that some of the SQL Server
    features got failed,  like: Reporting Services - Native, Database Engine Services, Data Quality Services, Full-Text and Semantic Extractions for Search and SQL Server Replication. I checked the Summary.txt
    file from location C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log. It thsi logs referes to another log file location like: 
    Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          1639
      Component log file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140127_151409\sql_engine_core_inst_Cpu64_1.log
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=sql_engine_core_inst.msi%400x162A16FE%400x1639
    I did unisntall/install multipel times. But fhw to fix the issue that saying in sql_engine_core_inst_Cpu64_1.log file.: 
    === Verbose logging started: 1/27/2014  15:45:04  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\x64\ScenarioEngine.exe ===
    MSI (c) (C4:BC) [15:45:04:321]: Resetting cached policy values
    MSI (c) (C4:BC) [15:45:04:321]: Machine policy value 'Debug' is 0
    MSI (c) (C4:BC) [15:45:04:321]: ******* RunEngine:
               ******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
               ******* Action: 
               ******* CommandLine: **********
    MSI (c) (C4:BC) [15:45:04:322]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (C4:BC) [15:45:04:322]: Grabbed execution mutex.
    MSI (c) (C4:BC) [15:45:04:323]: Cloaking enabled.
    MSI (c) (C4:BC) [15:45:04:323]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (C4:BC) [15:45:04:323]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (38:8C) [15:45:04:327]: Running installation inside multi-package transaction E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
    MSI (s) (38:8C) [15:45:04:327]: Grabbed execution mutex.
    MSI (s) (38:A0) [15:45:04:327]: Resetting cached policy values
    MSI (s) (38:A0) [15:45:04:327]: Machine policy value 'Debug' is 0
    MSI (s) (38:A0) [15:45:04:327]: ******* RunEngine:
               ******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
               ******* Action: 
               ******* CommandLine: **********
    MSI (s) (38:A0) [15:45:04:452]: Machine policy value 'TransformsSecure' is 0
    MSI (s) (38:A0) [15:45:04:452]: User policy value 'TransformsAtSource' is 0
    MSI (s) (38:A0) [15:45:04:475]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (38:A0) [15:45:04:475]: Specified instance {18B2A97C-92C3-4AC7-BE72-F823E0BC895B} via transform :InstID01.mst;:InstName02.mst is already installed. MSINEWINSTANCE requires a new instance that is not installed.
    MSI (s) (38:A0) [15:45:04:475]: MainEngineThread is returning 1639
    MSI (s) (38:8C) [15:45:04:477]: User policy value 'DisableRollback' is 0
    MSI (s) (38:8C) [15:45:04:477]: Machine policy value 'DisableRollback' is 0
    MSI (s) (38:8C) [15:45:04:477]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 
    MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 
    MSI (s) (38:8C) [15:45:04:478]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (38:8C) [15:45:04:478]: Restoring environment variables
    MSI (c) (C4:BC) [15:45:04:481]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (C4:BC) [15:45:04:481]: MainEngineThread is returning 1639
    === Verbose logging stopped: 1/27/2014  15:45:04 ===
    Please advice. I searched many places and did not get actual solution that will resolve my case.
    Nusrat Akhter

    Hi Nusrat Akhter,
    According to your description, when installing the first install failed, and it looks like the instance did not uninstall completely. To solve the issue I recommend you changed the instance name in re-installing SQL Server, and check if it can work fine.
    There is a similar issue that the SQL engine will not start, and there is no method of uninstalling either it, or any of the components etc. You can review the following post.
    https://connect.microsoft.com/SQLServer/feedback/details/710892/sql-server-2012-rc0-install-fails-citing-invalid-drivers
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Errors in the logs of my Application Server

    Hello,
    I am using Oracle Application Server 9.0.4.0.0.
    My services (ProcessManager & ASControl) start without any problem and I can log into the Enterprise Manager.
    However, I have got the following errors in:
    * em-application.log:
    emd: Portal Configuration Interface failed to initialise: oracle.sysman.emSDK.emd.comm.CommException: Received unexpected response text :
    <html><head><title>EMDAEMON</title></head><body text="#000000" bgcolor="#FFFFC0"><H1>EMDAEMON</H1><H2> HTTP/1.1 404 , Not Found<br></h2></body></html>
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1257)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1074)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getTargetInstances(EMDClient.java:366)
         at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.initEntrypoint(IASEntryPoint.java:116)
         at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.getTargetInfo(IASEntryPoint.java:299)
         at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.getEntryPoint(IASEntryPoint.java:226)
         at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.getEntryPoint(IASEntryPoint.java:277)
         at oracle.webdb.monitoring.hawkeye.PortalIntegration$InitThread.run(Unknown Source)
    * emias.log:
    ERROR iAS.IASEntryPoint initEntrypoint.120 - Unable to get iAS instances: Received unexpected response text :
    <html><head><title>EMDAEMON</title></head><body text="#000000" bgcolor="#FFFFC0"><H1>EMDAEMON</H1><H2> HTTP/1.1 404 , Not Found<br></h2></body></html>
    oracle.sysman.emSDK.emd.comm.CommException: Received unexpected response text :
    <html><head><title>EMDAEMON</title></head><body text="#000000" bgcolor="#FFFFC0"><H1>EMDAEMON</H1><H2> HTTP/1.1 404 , Not Found<br></h2></body></html>
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1257)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1074)...
    How could I fix these?
    And could these errors have an influence on the following ( I have installed Application Server and Database Enterprise Edition 10.1.0.2.0 on the same machine)?
    * I can run DB on its own fine.
    * I can run AppServer on its own fine.
    * If I start DB and then start the AppServer:
    - I can use DB ok but not the AppServer. Error when I log into the Enterprise Manager.
    * If I start AppServer and then DB:
    - I can use AppServer but DB does not start cleanly.
    Many thanks in advance.

    You are going to have to provide more information...
    The only time I ever encountered this was when I went to do a service call on someone with a loose connection on the plug right in the back of his iMac. Not every time but often when he wiggled the screen to adjust it he moved the power bar and / or power cable just enough to momentarily break contact.
    We plugged everything in securely and the problem never recurred...
    If yours is shutting down & restarting because of a power circuit fault there must be a problem with it that should be looked at.
    M

  • "Distribution Certificate is not valid" - error downloading the ZIP file from App Builder

    Hello everybody,
    I'm trying to download the Distribution App (.ZIP) from App Builder.
    - The App is made with a Professional account
    - The app is a Multi-folio for iPad-iPhone
    - The App has the Push notifications option activated
    - I made a couple of Push Certificates (production + developing), I checked on Apple Keychain and they are valid (green dot)
    - I made a new App ID with Push Notification option enabled
    - I made a couple of mobileprovision files (production + developing) based on the App ID and
    - I download the .IPA and it work
    The App Builder report this error: "This is not a valid Apple Distribution Certificate"
    Any ideas?
    Is this related to the Pro account and the fact that I made another App for Android?
    Has someone the ability to try using the same settings to understand if it is a bug or a real issue?
    Thanks,
    Andrea Spinazzola
    Ps.: Obviously, we are on deadline...

    Hi Neil,
    as you can imagine reading my list, I already do everything you suggested to me.
    So It's not my mistake, I need to know if it is a bug or a known behavior.
    When I'm talking about Pro Account and Android App, I mean that a Pro Account is for only one "project" (no more infinite Apps as in the past) and due to a content issue, I had to create two Application Account with two different Adobe ID and emails.
    Is this the cause?
    I appreciate every help that could solve my problem but just to let you know, I work on DPS since it start and this is about the fifteenth apps that I did in the last 5 years, so I know exactly how it works.
    Have you tried to reproduce my list of thing?
    It works for you?
    Yes?
    No?
    I have a problem, i can't generate with DPS App Builder "App distribuzione.zip" to be sent to Apple to publish APP, this is the error message: is not a valid distribution certificate Apple. What do I do?
    Same problem, same answers, same unsolved problem.
    I made new certificates (it was the first thing I did) and It doesn't work.
    Thanks.
    Andrea

  • Multiple Errors in the log file of 4402 WLC

    Hello all, has anyone seen this error before? If so, what is it referring to?
    *Jun 23 15:59:49.202: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.
    *Jun 23 15:59:18.939: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.
    *Jun 23 15:58:48.749: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.
    *Jun 23 15:58:18.572: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.
    *Jun 23 15:57:48.402: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.
    *Jun 23 15:57:18.302: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.
    *Jun 23 15:56:40.988: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.
    *Jun 23 15:56:31.929: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.
    *Jun 23 15:55:13.673: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents.

    I think you are hitting bug CSCsz00770 and CSCsy62741

  • LSMW - How to view the flat file on App Server

    Hi All,
    I'm trying to take a look at BC420_DOC_1_HEAD_POS.LEG which is the file for LSMW training BC420. However, this file is stored on the application (NT) server to which I have no access. Can I browse this file using R/3 utilities?
    I just want to see what a flat file for the training course looks like.
    Thanks so much!
    Roman

    Hi Roman,
    In general, the users will not have access to the directories on the application server directly at the OS level. You will have to go through an SAP program / transaction.
    Look at the transaction AL11. If the file that you are talking about resided in any of the directories listed in there you will be able to navigate to it.
    Regards,
    Anand Mandalika.

  • Count the ocurrences of a particular word in the log file of content server

    Hi all,
    How can we achieve this.
    Thanks,
    Chely

    ping.sumit wrote:
    Hi
    If I have a paragraph in a string, and have to find the occurrences of a particular word. How can I do that.
    for example if i have this paragraph in a String, and I have to find the occurrence of the word "the", how can I do that.
    ...ping.sumit, you've been a (fairly) active member on these forums for almost a year now. Do you really have no idea how to begin solving this problem?

  • Import Fails, No Error in the Logs

    I am trying to do a full export and import, including SSO, SEC, CAs and Pages, but not all pages import, only the first few pages actually import.
    No error in the log files.
    Any guidance as to what I should be looking for to see where it fails?

    If you haven't already, try reading over ALL of the Portal Export/Import FAQ located on OTN's PortalCenter at:
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/EXPORT_IMPORT_FAQ_1120.HTM
    In particular, the troubleshooting and error message sections in the above FAQ should help. If not, then let us know.
    Best Regards,
    Harry

  • Bursting Program Ends in Error with nothing in the Log file

    Hi All
    I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
    below is my log file
    +---------------------------------------------------------------------------+
    XML Publisher: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XDOBURSTREP module: XML Publisher Report Bursting Program
    +---------------------------------------------------------------------------+
    Current system time is 30-SEP-2013 15:11:15
    +---------------------------------------------------------------------------+
    XML/BI Publisher Version : 5.6.3
    Request ID: 574533
    All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
    Report Req ID: 574532
    Debug Flag: Y
    Updating request description
    Updated description
    Retrieving XML request information
    Node Name:T1DEVEBSAPP1
    Preparing parameters
    null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
    inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
    Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
    Set Bursting parameters..
    Temp. Directory:/tmp
    [093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
    [093013_031118657][][STATEMENT] setOAProperties called..
    Bursting propertes.....
    {user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
    Start bursting process..
    Bursting process complete..
    Generating Bursting Status Report..
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    602
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 30-SEP-2013 15:11:41
    +---------------------------------------------------------------------------+
    and the output says..
    "Error!! Could not deliver the output for Delivery channel:null "
    Wondering What might be the issue, any help on this is greatly appreciated.
    -Ragul

    Ram,
    Is this a custom or standard concurrent program?
    Was this working properly before? If yes, what changes have been done recently?
    Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
    Regards,
    Hussein

  • Bursting Program Errors Out with nothing in the Log file

    Hi All
    I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
    below is my log file
    +---------------------------------------------------------------------------+
    XML Publisher: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XDOBURSTREP module: XML Publisher Report Bursting Program
    +---------------------------------------------------------------------------+
    Current system time is 30-SEP-2013 15:11:15
    +---------------------------------------------------------------------------+
    XML/BI Publisher Version : 5.6.3
    Request ID: 574533
    All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
    Report Req ID: 574532
    Debug Flag: Y
    Updating request description
    Updated description
    Retrieving XML request information
    Node Name:T1DEVEBSAPP1
    Preparing parameters
    null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
    inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
    Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
    Set Bursting parameters..
    Temp. Directory:/tmp
    [093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
    [093013_031118657][][STATEMENT] setOAProperties called..
    Bursting propertes.....
    {user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
    Start bursting process..
    Bursting process complete..
    Generating Bursting Status Report..
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    602
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 30-SEP-2013 15:11:41
    +---------------------------------------------------------------------------+
    and the output says..
    "Error!! Could not deliver the output for Delivery channel:null "
    Wondering What might be the issue, any help on this is greatly appreciated.
    -Ragul

    Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
    I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
    Thanks,
    Hussein

  • Can't open Flash Builder - "See the log file" error.

    I have been using Flash Builder 4.5 and for some reason it has stopped opening correctly - I get the following error then it just shuts down.... :
    "An error has occured. See the log file."
    and if i check the log file it refers to then i see the following text:
    !SESSION 2011-06-22 13:53:43.658 -----------------------------------------------
    eclipse.buildId=M20100909-0800
    java.version=1.6.0_16
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments:  -os win32 -ws win32 -arch x86
    !ENTRY org.eclipse.osgi 4 0 2011-06-22 13:53:59.598
    !MESSAGE Application error
    !STACK 1
    org.eclipse.swt.SWTError: No more handles
        at org.eclipse.swt.SWT.error(SWT.java:4109)
        at org.eclipse.swt.SWT.error(SWT.java:3998)
        at org.eclipse.swt.SWT.error(SWT.java:3969)
        at org.eclipse.swt.widgets.Widget.error(Widget.java:468)
        at org.eclipse.swt.widgets.Control.createHandle(Control.java:633)
        at org.eclipse.swt.widgets.Composite.createHandle(Composite.java:305)
        at org.eclipse.swt.widgets.Control.createWidget(Control.java:649)
        at org.eclipse.swt.widgets.Scrollable.createWidget(Scrollable.java:134)
        at org.eclipse.swt.widgets.Control.<init>(Control.java:110)
        at org.eclipse.swt.widgets.Scrollable.<init>(Scrollable.java:75)
        at org.eclipse.swt.widgets.Composite.<init>(Composite.java:95)
        at org.eclipse.ui.splash.BasicSplashHandler.getBundleProgressMonitor(BasicSplashHandler.java :159)
        at org.eclipse.ui.splash.BasicSplashHandler.getContent(BasicSplashHandler.java:265)
        at org.eclipse.ui.internal.splash.EclipseSplashHandler.init(EclipseSplashHandler.java:86)
        at org.eclipse.ui.internal.Workbench$8.run(Workbench.java:782)
        at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
        at org.eclipse.ui.internal.Workbench.createSplashWrapper(Workbench.java:798)
        at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2467)
        at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
        at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
        at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
        at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
        at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
        at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
    This is incredably frustrating as you can imagine as it effectively means i cant work anymore, it is clearly some kind of problem with eclipse but i have no idea what.
    I have tried re-installing Flash Builder twice and no luck.
    Can anyone help with this???
    Thanks !!!!
    Elliot.

    There is a similar thread with exact same stackstrace and problmes reported with earlier verison of FB. You can check it here http://forums.adobe.com/thread/832073. Thre is also representation of Adobe engineers on this thread. Aprarenlty there are certain updates(Eclipse / java) that FB doen't encourage, post FB is installed in stanadlone mode and workarounds are suggested on this thread to overcome this problem. If you are workign in plugin environment with FB, I guess updates are not affecting FB installtion. Please try out the solutions presented on this thread and let us know.

Maybe you are looking for

  • Videos no longer recognized by MacBook Pro

    A novice here.  I have home videos that used to work (.m4v and .mkv) but they no longer do.  The size appears to be what they always were (4.12+ GB) but the icon is now solid white and is no longer recognized by anything (QuickTime, Preview, etc.). 

  • Move Image Data from Sql Server to Oracle

    I try to move Image data from a Sql Server Database to a Oracle Database. The dataType in Sql Server is Image and the target datatype in Oracle is BLOB. When I try to move my Sql Server data to Oracle I get the following error message Data Move infor

  • Looping video or audio slide

    I have been trying to "loop" a video file to play over and over and am having no luck. I thought I could follow instructions, but eveidently I'm retarded or the instructions are not correct. I also would like to loop an entire presentation without fi

  • Front Row Appears & Disappears...

    When I press cmd+esc or use the apple remote to start front row, the screen briefly fades into the black screen that normally happens when front row begins but it then that instantly fades back onto my normal screen, it seems that front row begins bu

  • Problem with updating to Photoshop CS5 12.0.4

    Hello I have the problem that I cannot update to the newest Photoshop Patch. I tried everything mentioned in this discussion (http://forums.adobe.com/message/3699046?tstart=0) but with no success... What can I do else? I tried to contact Adobe Suppor