Counting Rule /33/020 does not exist

Hi All,
On changing the Employee Sub-group of an employee, I am getting the error as
" Counting Rule /33/020 does not exist" . This employee sub group was created recently in the system. Please let me find where the configuration is missing as i have no idea regarding Counting Rules.

Hi,
Check the employee groups and employee groupings in the counting rules. Check in this node of Group Employee Subgroups for Time Quotas. in this node group and counting rule groups are same or not. And assign the counting rules to absences V_554S_Q in this table.
? Esg. grouping
33 - Psg grouping
020 - counting rule
Good luck
Devi

Similar Messages

Counting rule /00/007 does not exist

Hi
While maintaining an attendance(2002) type using tcode PA30 resulted in an error as " Counting rule /00/007 does not exist"
with a message number "Message no. 3H010".
Can any one please analyse the error and suggest the solution for the same. If need to maintain any customization can you please specify the particular path to maintain those settings.
Regards
Pavan

Hi
@ Sikindar
I Can see my counting rule in the table T556C
@ Jithu
I have maintained all the things which you have specified.
@ Evani
I have maintained alll the entries. Just now i cross verified too.
@ all above
Can you please suggest me the solution please because i have crossed all the steps which you have mentioned still got an error. Is there anything else to be maintained for this counting rule??
Regards
Pavan

I am getting this error message while accessing IT2002 Counting rule 2/01/001 does not exist Message no. 3H010

hi All,
I am getting this error message while accessing IT2002
Counting rule 2/01/001 does not exist
Message no. 3H010
Please guide ASAP
Regards,
Ayousef

Hi Ahmed,
Please go through the below mentioned thread.
scn.sap.com/thread/1187160
Regards,
Haranath

Counting rule 08/1/00/.. does not exist

Hi,
We are getting this error when we are running a program to upload the sickness description in PA2001, we are getting the following error
Counting rule 08/1/00/.. does not exist
Can anyone please give me the step by step config to be carried out in T554c to resolve this error?
Thanks and Regards,
Saumik

Hi Saumik,
Your config is
EE Sub Group Grouping: 8
Pers Subarea Grouping: 1
Counting Rule: 00
1. check T556C if Counting Rule 00 exists for EE Sub Group Grpg 8 & Pers Subarea Grpg 1.
2. If Deduction of Quota is applicable, See if the Deduction Rule is configured & assigned in this table.
3. Also Check if the Counting Rule 00 is assigned to the Absence in T554S. Also check the Validity dates in these tables.
Good Luck !!!
Kumarpal Jain.

Ruler Tool- Error 48: File or folder does not exist

I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
Error 48: File or folder does not exist.
Line: 31
-> $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
Any ideas?

i'm getting the exact error using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
HELP!!!
someone
hello ... anyone out there?
how do we get support for this error?
e

11g SOA Composite Rules Error - Rule session pool object does not exist

Hi all,
I'm hoping someone has experienced this and found a way through it. We're looking at exposing Oracle Rules DecisionFunctions via the automagically created web services in JDeveloper. We've tried several Rules examples, including the OrderApproval one available online, and are getting errors everytime we try and test the web service.
Firstly we get this error:
[2010-09-01T09:47:24.249+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ45P0FwI5yrDCiW1CV7Dc000AwY,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 04c3bc86-9452-4755-9bbf-51591f1c7fff] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002aae] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130022] <.> Error caching the Decision Services metadata.[[
Error caching the decision services metadata for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1.
Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
Error caching the Decision Services metadata.
Error caching the decision services metadata for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1.
Check the underlying exception and correct the error. This is most likely due to a rule modeling isssue. Validate the rule dictionary in rule designer and fix any errors and warnings. If the error persists, contact Oracle Support Services.
     at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
     at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:362)
     at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:221)
     at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:609)
     at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
     at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
     at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
     at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy248.request(Unknown Source)
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
     at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
     at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
     at oracle.rules.sdk2.datamodel.DecisionFunction.getGlobalTypeIDs(DecisionFunction.java:860)
     at oracle.rules.sdk2.datamodel.DecisionFunction.validate(DecisionFunction.java:342)
     at oracle.rules.sdk2.dictionary.DictionaryComponentTable.validate(DictionaryComponentTable.java:221)
     at oracle.rules.sdk2.datamodel.DataModel.validate(DataModel.java:92)
     at oracle.rules.sdk2.dictionary.RuleDictionary.validate(RuleDictionary.java:1093)
     at oracle.rules.sdk2.dictionary.RuleDictionary.update(RuleDictionary.java:835)
     at oracle.rules.sdk2.datamodel.DataModel.generateFactClasses(DataModel.java:115)
     at oracle.rules.sdk2.dictionary.RuleDictionary.dataModelRL(RuleDictionary.java:1398)
     at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1141)
     ... 44 more
And then we get the following error:
[2010-09-01T09:47:24.390+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ45P0FwI5yrDCiW1CV7Dc000AwY,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 04c3bc86-9452-4755-9bbf-51591f1c7fff] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002aae] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130022] <.> [[
oracle.fabric.common.BusinessFaultException
     at oracle.bpel.services.rules.impl.DecisionServiceCache.cacheDecisionServiceMetadata(DecisionServiceCache.java:1211)
     at oracle.bpel.services.rules.impl.DecisionServiceCache.prepare(DecisionServiceCache.java:362)
     at oracle.bpel.services.rules.impl.DecisionServiceImpl.preProcess(DecisionServiceImpl.java:221)
     at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:609)
     at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
     at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
     at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
     at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy248.request(Unknown Source)
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
     at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
     at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
And lastly this one:
[2010-09-01T09:47:30.437+10:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IfAZ5iO0FwI5yrDCiW1CV7Dc000Awd,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: CR] [component_name: OracleRules1] [component_instance_id: 08f3eaa8-ce61-4ec9-a646-af821be06420] [J2EE_MODULE.name: fabric] [dcid: 761c1dbb0eb1dbdc:-33082b47:12ac627683f:-7ffd-0000000000002ab0] [WEBSERVICE.name: OracleRules1_DecisionService_1_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 130023] <.> Rule session pool object does not exist.[[
The requested rule session pool object for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1 and key OracleRulesSDK$OracleRules1 does not exist.
Check the underlying exception and correct the error. This is most likely due to a rules validation error. Validate the rule dictionary in Rule Designer and correct the validation error. If the error persists, contact Oracle Support Services.
Rule session pool object does not exist.
The requested rule session pool object for path default/CR!1.0*soa_f8581f86-106e-4f47-825f-89148db6663b/OracleRules1 and key OracleRulesSDK$OracleRules1 does not exist.
Check the underlying exception and correct the error. This is most likely due to a rules validation error. Validate the rule dictionary in Rule Designer and correct the validation error. If the error persists, contact Oracle Support Services.
     at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:528)
     at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.execute(OracleRuleSession.java:260)
     at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:331)
     at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:634)
     at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
     at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
     at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
     at sun.reflect.GeneratedMethodAccessor1197.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy248.request(Unknown Source)
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
     at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
     at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Has anyone had any luck actually getting this to work? If so, how? It simply seems like this particular aspect of the product is broken!
Your help would be VERY much appreciated!
Regards,
Rhian

Hi SR,
Thanks for your response. I attempted what you've suggested (1=1 - asset new fact in output), however nothing has changed.
This is occurring across several Composite Rules projects, including the Oracle provided Chapter 5 Order Approval example. Unless someone can suggest a solution to this issues, it looks like we're going to have to shelf our plans to utilize the Business Rules component via the composite service.
Very frustrating couple of days, that's for sure! :{
Regards,
Rhian

Counter group "WEB_SYSTEM_CAPACITY" does not exist.

Hi all;
Why Im having this issue.
The Critical message is:
Counter group "WEB_SYSTEM_CAPACITY" does not exist.
Product: IronPort S370 Web Security Appliance
Model: S370
Version: 7.1.3-011
After I received the first notification, I can´t see any kind of report in Reporting->Overview.
Regards;

Hi,
According to the error message,
The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
OR
Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
You will see
                                     Template ID :
                                     Reusable Web Item ID :
                                     Version :
Give "template name" and see what is the version.
If it is "D" then please change that to version "A". and check if issue persist.
Hope this helps.
Regards,
Mani

Error during unattended install of SQL 2012 (..setting 'CLTRESULTDIR' does not exist.)

Hi ALl,
I'm trying an automated install of SQL 2012 on WIndows 2012, but I keep running into this error (using a configuration.ini file generated by running through setup and grabbing it just before I clicked 'OK')
Contents of summary log:
Overall summary:
   Final result:                  Failed: see details below
   Exit code (Decimal):           -2068578304
   Exit facility code:            1204
   Exit error code:               0
   Exit message:                  The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not
exist.
   Start time:                    2015-01-09 10:19:12
   End time:                      2015-01-09 10:20:07
   Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
   Next step for SQLEngine:       SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Replication:     SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for FullText:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for DQ:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for AS:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for RS:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for RS_SHP:          SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for RS_SHPWFE:       SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for DQC:             SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for IS:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Conn:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Adv_SSMS:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for SDK:             SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for BC:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for DREPLAY_CTLR:    SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for DREPLAY_CLT:     SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for BIDS:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for SSMS:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for SNAC:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for SNAC_SDK:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Writer:          SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for BOL:             SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Browser:         SQL Server Setup was canceled before completing the operation. Try the setup process again.
Machine Properties:
   Machine name:                  IDCSQLTST11
   Machine processor count:       2
   OS version:                    Future Windows Version
   OS service pack:
   OS region:                     United States
   OS language:                   English (United States)
   OS architecture:               x64
   Process architecture:          64 Bit
   OS clustered:                  No
Product features discovered:
   Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Package properties:
   Description:                   Microsoft SQL Server 2012
   ProductName:                   SQL Server 2012
   Type:                          RTM
   Version:                       11
   SPLevel:                       0
   Installation location:         E:\SQL_Server_2012_StandardEdition\x64\setup\
   Installation edition:          Standard
Product Update Status:
   None discovered.
User Input Settings:
   ACTION:                        Install
   ADDCURRENTUSERASSQLADMIN:      false
   AGTSVCACCOUNT:                 NT Service\SQLSERVERAGENT
   AGTSVCPASSWORD:                <empty>
   AGTSVCSTARTUPTYPE:             Automatic
   ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
   ASCOLLATION:                   Latin1_General_CI_AS
   ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
   ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
   ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
   ASPROVIDERMSOLAP:              1
   ASSERVERMODE:                  MULTIDIMENSIONAL
   ASSVCACCOUNT:                  NT Service\MSSQLServerOLAPService
   ASSVCPASSWORD:                 <empty>
   ASSVCSTARTUPTYPE:              Manual
   ASSYSADMINACCOUNTS:            DOMAINAA\SQLADMINS
   ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
   BROWSERSVCSTARTUPTYPE:         Disabled
   CLTCTLRNAME:
   CLTRESULTDIR:                  C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir
   CLTSTARTUPTYPE:                Manual
   CLTSVCACCOUNT:                 NT Service\SQL Server Distributed Replay Client
   CLTSVCPASSWORD:                <empty>
   CLTWORKINGDIR:                 C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir
   COMMFABRICENCRYPTION:          0
   COMMFABRICNETWORKLEVEL:        0
   COMMFABRICPORT:                0
   CONFIGURATIONFILE:             E:\SQL_Server_2012_StandardEdition\ConfigurationFile.ini
   CTLRSTARTUPTYPE:               Manual
   CTLRSVCACCOUNT:                NT Service\SQL Server Distributed Replay Controller
   CTLRSVCPASSWORD:               <empty>
   CTLRUSERS:                     DOMAINAA\user12345
   ENABLERANU:                    false
   ENU:                           true
   ERRORREPORTING:                false
   FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS,
DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK
   FILESTREAMLEVEL:               0
   FILESTREAMSHARENAME:           <empty>
   FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher
   FTSVCPASSWORD:                 <empty>
   HELP:                          false
   INDICATEPROGRESS:              false
   INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server
   INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server
   INSTALLSQLDATADIR:             <empty>
   INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server
   INSTANCEID:                    MSSQLSERVER
   INSTANCENAME:                  MSSQLSERVER
   ISSVCACCOUNT:                  NT Service\MsDtsServer110
   ISSVCPASSWORD:                 <empty>
   ISSVCSTARTUPTYPE:              Automatic
   MATRIXCMBRICKCOMMPORT:         0
   MATRIXCMSERVERNAME:            <empty>
   MATRIXNAME:                    <empty>
   NPENABLED:                     0
   PID:                           *****
   QUIET:                         true
   QUIETSIMPLE:                   false
   ROLE:
   RSINSTALLMODE:                 DefaultNativeMode
   RSSHPINSTALLMODE:              SharePointFilesOnlyMode
   RSSVCACCOUNT:                  NT Service\ReportServer
   RSSVCPASSWORD:                 <empty>
   RSSVCSTARTUPTYPE:              Manual
   SAPWD:                         <empty>
   SECURITYMODE:                  SQL
   SQLBACKUPDIR:                  <empty>
   SQLCOLLATION:                  Latin1_General_CI_AS
   SQLSVCACCOUNT:                 NT Service\MSSQLSERVER
   SQLSVCPASSWORD:                <empty>
   SQLSVCSTARTUPTYPE:             Automatic
   SQLSYSADMINACCOUNTS:           DOMAINAA\SQLADMINS
   SQLTEMPDBDIR:                  F:\TempDB
   SQLTEMPDBLOGDIR:               <empty>
   SQLUSERDBDIR:                  E:\SQLData
   SQLUSERDBLOGDIR:               D:\SQLLog
   SQMREPORTING:                  false
   TCPENABLED:                    1
   UIMODE:                        Normal
   UpdateEnabled:                 true
   UpdateSource:                  MU
   X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150109_101753\ConfigurationFile.ini
Detailed results:
   Feature:                       Database Engine Services
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Server Replication
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Full-Text and Semantic Extractions for Search
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Data Quality Services
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Analysis Services
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Reporting Services - Native
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Reporting Services - SharePoint
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Reporting Services Add-in for SharePoint Products
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Data Quality Client
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Integration Services
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Client Tools Connectivity
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Management Tools - Complete
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Client Tools SDK
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Client Tools Backwards Compatibility
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Distributed Replay Controller
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Distributed Replay Client
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Server Data Tools
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Management Tools - Basic
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Client Connectivity
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Client Connectivity SDK
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Writer
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Documentation Components
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Browser
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150109_101753\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
     Message:
         The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not exist.
     HResult : 0x84b40000
         FacilityCode : 1204 (4b4)
         ErrorCode : 0 (0000)
     Data:
       SQL.Setup.FailureCategory = InputSettingValidationFailure
       DisableWatson = true
     Stack:
         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
     Inner exception type: Microsoft.SqlServer.Configuration.DistributedReplayExtension.DirectoryNotExistException
         Message:
                 The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not exist.
         HResult : 0x87d00006
                 FacilityCode : 2000 (7d0)
                 ErrorCode : 6 (0006)
         Data:
           DirectoryPath = C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir
           SettingName = CLTRESULTDIR
           WatsonData =
Microsoft.SqlServer.Configuration.DistributedReplayExtension.DirectoryNotExistException@6

Hello,
Open the configuration file with notepad, then go to the “features” variable. On the following article you will find what
means each parameter:
http://msdn.microsoft.com/en-us/library/ms144259(v=sql.110).aspx#Feature
You will also find the list of features supported by each edition on the following article:
http://msdn.microsoft.com/en-us/library/Cc645993(v=sql.110).aspx
For example, it seems you have DQ and DQC on that configuration file, please remove them with their corresponding commas.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thanks Albert that worked when I just selected the main features and excluded ones like DQ and DRC. Thing is why would the standard media allow you to install enterprise features, create a configuration file with these enterprise features and then fail?? Why
would Microsoft tease you like that? Frustrating since I spent hours on this ..

Scope in your query does not exist

I've created a Search Center Site Collection but the results aren't being refined based on the scopes and I'm getting the message that the Scope in your query does not exist The query is being formed correct as this is what the url displays:
/Sites/Search/Results.aspx?k=bcm&s=BCM
The scope contain one Include rule and the rule seems to work, in that it is finding items (118 in the below example) but the Total is 0. I've tested this similiar configuration in another test site and it shows the same number for both Item Count AND
Total AND it works correctly so I'm guessing this is the issue.
Any ideas?
Joe

Inderjeet,
Both the dev and prod are different is that dev is using a search site col and dev is using just a search page as follows:
dev - http://dev.com/Search/Results.aspx?k=test&s=ACM
prod - https://prod.com/Sites/Search/Results.aspx?k=Test&s=ACM
As for permissions...I noticed that the Ribbon is greyed out in the Search Site Col. I'm an Owner and can add users to that group but am not being provided any access to ribbon.  Could that be an issue?    I still find it
odd that the Scope indicates results but that Total is blank.
If I rerun the query while on the results search page then it returns results
https://prod.com/Sites/Search/results.aspx?k=test, so it can find the data.
Joe

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

Transfer structure 0BUS_AREA_TEXT_HA does not exist

We are transporting InfoCube - 0FIGL_C10. which we had collected in a transport request with grouping as in Data Flow Before. This request ended with return code 12 with error message "Transfer structure 0BUS_AREA_TEXT_HA does not exist, Error RSAR 440 when handling objects with type R3TR ISTS"
After this I collected the transfer rules of 0BUS_AREA_Text with grouping as dataflow before and after. the transport of this request also failed with return code 12 with the same error message "Transfer structure 0BUS_AREA_TEXT_HA does not exist, Error RSAR 440 when handling objects with type R3TR ISTS"
has any one faced this error, please suggest the corrective action to be taken,

hi all,
I'm now getting the same error when I try to activate a created "transfer rules" for any type of DataSource of my cProject.
"Transfer structure 0DPR_***********_DA does not exist
Message no. RSAR440"
please show me on step by step because I'm a new guy of this SAP.
Thanks,
Chuong Hoang
R&D engineer of global cybersoft - vn

Transfer Structure 2LIS_03_BX_QB does not exist

Hi all,
I got the following error message when transporting infosource 2LIS_03_BX.
"Transfer Structure 2LIS_03_BX_QB does not exist"
Maybe somebody can help me.
Thanks and appreciate that,
-Martin-

hi Martin,
try in dev rsa1->transport connection with infosource 2lis_03_bx as starting point, collection mode 'manual', grouping 'in dataflow before', and click 'source system assignment' (yellow box with x) and make sure r/3 source system is marked. then click execute. it will collect objects, after finish, make sure transfer rules, transf structure and datasource are marked following the infosource. create request and transport.

Problem creating a view in Administrator: 942: table or view does not exist

Hi and thank you for reading,
I am working with the Administration tool and would like to create a view in the physical layer. However I am getting the following error messages when I try to view the Date in the view:
[NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occured.
[nQSError: 43093] An error occured while processing the EXECUTE PHYSICAL satement.
*[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute.*
[nQSError: 17010] SQL statement preparation failed.
[NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occured.
[nQSError: 43093] An error occured while processing the EXECUTE PHYSICAL satement.
*[nQSError: 17001] Oracle Error code: 936, message: ORA-00936: missing expression at OCI call OCIStmtExecute.*
[nQSError: 17010] SQL statement preparation failed.
I proceed as following:
Right click on a physical schema (this schema is already created and works in Answers) -> new Physical Schema ->Table Type: Select -> Select * from Table_A where name='name' (Table_A is in the physical schema) -> OK -> Save -> Deploy -> Update Row count (works) -> View Data -> Error
Any Idea what I am doing wrong. I have started with an easy select statement to test how to create a view in Oracle Administrator.
Thanks a lot for any help
Evgeny

Do you see Table_A, and in which database schema?
Try to put alias (database user) before table name.
Select * from user.Table_A where name='name'
Where user is database user.
If you have Table_A in another user and connection pool is set to different user, then grant select from Table_A owner to connection pool user (make synonym for Table_A):
Example (I'm using connection pool from userB and have tables from userA and userB).
create or replace public synonym xx for userA.xx
and
grant select on xx to userB
Hope this helps.
Regards,
Goran
http://108obiee.blogspot.com

ORA-01092: ORACLE instance terminated. Disconnection forced ORA-00942: table or view does not exist on 12C RAC

Hi Geeks,
I have encountered an issue while starting up my database on 12c RAC.
Till mount it goes fine but when i attempt to open it throws me an error.
Total System Global Area 1.5400E+10 bytes
Fixed Size                  4737560 bytes
Variable Size            2952791528 bytes
Database Buffers         1.2415E+10 bytes
Redo Buffers               26857472 bytes
Database mounted.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00942: table or view does not exist
Process ID: 11338068
Session ID: 1429 Serial number: 3
Here is the trace file output...
ORACLE_HOME = /oracle_home/app/orahome
System name:    AIX
Node name:      INS1
Release:        1
Version:        7
Machine:        00C8CCA74C00
Instance name: INST1
Redo thread mounted by this instance: 1
Oracle process number: 7
Unix process pid: 20381876, image: oracle@ins1 (TNS V1-V3)
*** 2014-11-27 22:49:20.892
*** SESSION ID:(197.5) 2014-11-27 22:49:20.892
*** CLIENT ID:() 2014-11-27 22:49:20.892
*** SERVICE NAME:() 2014-11-27 22:49:20.892
*** MODULE NAME:(sqlplus@ins1 (TNS V1-V3)) 2014-11-27 22:49:20.892
*** ACTION NAME:() 2014-11-27 22:49:20.892
2014-11-27 22:49:20.889716 : Start recovery for domain=0, valid=0, flags=0x4
*** 2014-11-27 22:49:24.580
Successfully allocated 32 recovery slaves
Using 3 overflow buffers per recovery slave
*** 2014-11-27 22:49:24.740
Thread 1 checkpoint: logseq 15, block 2, scn 3510749
cache-low rba: logseq 15, block 3
    on-disk rba: logseq 15, block 72, scn 3510824
start recovery at logseq 15, block 3, scn 0
*** 2014-11-27 22:49:24.981
Started resilvering redo thread 1 seq 15 blocks 72-73
*** 2014-11-27 22:49:24.994
Completed resilvering redo thread 1 seq 15
*** 2014-11-27 22:49:24.994
Started writing zeroblks thread 1 seq 15 blocks 74-81
*** 2014-11-27 22:49:24.994
Completed writing zeroblks thread 1 seq 15
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 35Kb in 0.25s => 0.14 Mb/sec
Longest record: 0Kb, moves: 0/104 (0%)
Longest LWN: 2Kb, moves: 0/33 (0%), moved: 0Mb
Last redo scn: 0x0000.0035922b (3510827)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 151/176 = 0.9
*** 2014-11-27 22:49:25.007
KCRA: start recovery claims for 25 data blocks
*** 2014-11-27 22:49:25.039
KCRA: blocks processed = 25/25, claimed = 25, eliminated = 0
*** 2014-11-27 22:49:25.054
Recovery of Online Redo Log: Thread 1 Group 6 Seq 15 Reading mem 0
*** 2014-11-27 22:49:25.060
Completed redo application of 0.02MB
*** 2014-11-27 22:49:25.235
Completed recovery checkpoint
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 176/176 = 1.0
Recovery sets nab of thread 1 seq 15 to 74 with 8 zeroblks
*** 2014-11-27 22:49:26.000
2014-11-27 22:49:26.000433 : Validate domain 0
2014-11-27 22:49:26.001348 : Validated domain 0, flags = 0x0
*** 2014-11-27 22:49:28.315
Count of ofsmtab$: 0 entries
*** 2014-11-27 22:49:28.732
ORA-00942: table or view does not exist
ORA-00942: table or view does not exist
*** 2014-11-27 22:49:28.738
USER (ospid: 20381876): terminating the instance due to error 942

In my case the issue has fixed by executing the following..
grant SELECT on SYS.USER$ to XDB;
grant SELECT on SYS.USER$ to CTXSYS;
grant SELECT on SYS.USER$ to DVSYS;
grant SELECT on SYS.USER$ to LBACSYS;
grant SELECT on SYS.USER$ to APEX_040200;
grant SELECT on SYS.USER$ to DV_SECANALYST;
Refer the above screen shot...

Database startup showing ORA-00942: table or view does not exist in trace

Hi Friends,
SunOS 5.10 Generic_137112-06 i86pc i386 i86pc , 64 Bit
Oracle 10.2.0.1.0
While I am doing a startup, getting following error.
SQL> startup;
ORACLE instance started.
Total System Global Area 3221225472 bytes
Fixed Size 2122544 bytes
Variable Size 410819792 bytes
Database Buffers 2801795072 bytes
Redo Buffers 6488064 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forcedThe alert log shows the following
Errors in file /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc:
ORA-00942: table or view does not exist
Error 942 happened during db open, shutting down database
USER: terminating instance due to error 942
Instance terminated by USER, pid = 11486
ORA-1092 signalled during: ALTER DATABASE OPEN...A look at the trace file shows this
/applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /applns/oracle
System name: SunOS
Node name: N890
Release: 5.10
Version: Generic_137112-06
Machine: i86pc
Instance name: CTSD1
Redo thread mounted by this instance: 1
Oracle process number: 23
Unix process pid: 11486, image: oracle@N890 (TNS V1-V3)
*** SERVICE NAME:() 2011-02-16 19:24:50.188
*** SESSION ID:(325.3) 2011-02-16 19:24:50.188
Successfully allocated 3 recovery slaves
Using 367 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 45929, block 2, scn 310788795>cache-low rba: logseq 45929, block 3
>on-disk rba: logseq 45929, block 52, scn 310788832
>start recovery at logseq 45929, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 24Kb in 0.31s => 0.08 Mb/sec
Total physical reads: 4096Kb
Longest record: 0Kb, moves: 0/61 (0%)
Longest LWN: 16Kb, moves: 0/3 (0%), moved: 0Mb
Last redo scn: 0x0000.128642df (310788831)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 117/121 = 1.0
*** 2011-02-16 19:24:50.515
KCRA: start recovery claims for 4 data blocks
*** 2011-02-16 19:24:50.515
KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0
*** 2011-02-16 19:24:50.516
Recovery of Online Redo Log: Thread 1 Group 1 Seq 45929 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 121/121 = 1.0
ORA-00942: table or view does not existI have searched MOS and Google, but didn;'t get any relevant results.
Also flushed my shared_pool as mentioned in (http://www.tanelpoder.com/files/oracle_rowcache.pdf) after mount and started , still no luck
Any help is appreciated
Thanks
SSN

Hi,
Thanks.
Tried log mining, but still couldn't find the culprit. I think now, I have to drop and create this db.Still wondering what might have happened.
select group#,status from v$log;
    GROUP# STATUS
         1 INACTIVE
         3 INACTIVE
         2 CURRENT
SQL> select group#,MEMBER from v$logfile where group#=2;
    GROUP#
MEMBER
         2
/applns/oracle/oradata/CTSD1/redo02.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo02.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=1;
    GROUP#
MEMBER
         1
/applns/oracle/oradata/CTSD1/redo01.log
         1
/applns/oracle/oradata/CTSD1/redolog001.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo01.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redolog001.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=3
    GROUP#
MEMBER
         3
/applns/oracle/oradata/CTSD1/redo03.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo03.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.SSN

Counting Rule /33/020 does not exist

Similar Messages

Maybe you are looking for