Coverflow is fixed for me! No more Diagonal lines cutting across artwork.

I was one of many that was plagued with that nasty diagonal line cutting across each artwork in the cover flow display. There was one update that still did not fix the artwork issue but the very next upgrade that allowed for full screen cover flow didn't have that nasty diagonal line issue. I'm glad that is finally fixed!
I stopped using cover flow because I became so angry seeing that line and having my mind wander about why it was there and why it was there for so long. And then I just plum forgot to check in here to see if therewe any update for the problem.

Well, My Coverflow is still working well! Apple finally got something fixed for us Windows users! Thank you!

Similar Messages

  • Is there a fix for a 2 inch black line on my iPad

    Is there a fix for a 2 inch black line on my ipad

    Contact apple to see if the product is still covered under warranty, it will probably need to be replaced
    https://www.apple.com/support/contact/

  • Fix for X-grid agents losing their config across reboots??

    Hello,
    We have a podcast producing system with 5 servers, 3 of which are Xgrid agents,
    and one of the others is the Xgrid controller. Sometimes we need to reboot some
    of the machines, and when we do the whole Xgrid set up goes. We need to go in to
    XGrid Admin, remove the agents, and re-add them, then log in to each agent, and start/configure Xgrid to find/join the XGrid again. Even though Xgrid is set as a service on these Xgrid agents, and they were previously configured. All XServers
    are running 10.5.5. Is this normal, or how do others manage to keep their Agents
    in the Grid across reboots? Thanks - Paul

    screw it.. i dunno... bad drivers, that's what i'm accounting it to. Nobody seems to know what the problem is anymore.
    With that said, the card works wonderfully now =D
    Someone on this board mentioned some third party drivers, so I went and found them. I had no troubles installing and have had no troubles with the drivers
    since their installation a few days ago.
    These drivers are not supported nor created by Creative (as far as I know). Use the drivers at your own risk.
    First, go to this address and read up on their drivers and how to install and what not. All the posts you should care about are sticked, so read the stickies!
    http://www.youp-pax.org/forumdisplay.php?fid=3&page=
    I noticed that the links to their drivers are lousy/don't work. Some nice person went and hosted all their files on a different site.
    http://hosted.filefront.com/robertmc84
    Be very cautious when downloading their drivers from filefront. The host has numerous old versions up and the file names aren't always 00% copy/paste from
    the YouP Pax site, so be certain you have the right file before downloading/installing.
    READ THE STICKIED INSTALLATION GUIDE! Same thing as with the installing Creatives' drivers, if you don't completely uninstall former drivers, bad things happen.

  • [svn] 3540: Fix for missing name of the exception class, when @ throw is used.

    Revision: 3540
    Author: [email protected]
    Date: 2008-10-09 11:20:44 -0700 (Thu, 09 Oct 2008)
    Log Message:
    Fix for missing name of the exception class, when @throw is used.
    Also fixes for:
    SDK-17212 - Add a line feed between messages in the ASDoc validation_errors.log file.
    SDK-17242 - The Constants.as and GlobalFunctions.as classes from system classes need to have their content added to __Global__.xml
    SDK-17256 - For methods of the mx.components.Group class, args or return values of type Object do not appear in the ASDoc output.
    QA: Yes
    Doc:
    Tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17212
    http://bugs.adobe.com/jira/browse/SDK-17242
    http://bugs.adobe.com/jira/browse/SDK-17256
    Modified Paths:
    flex/sdk/trunk/asdoc/templates/class-files.xslt
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    Revision: 3540
    Author: [email protected]
    Date: 2008-10-09 11:20:44 -0700 (Thu, 09 Oct 2008)
    Log Message:
    Fix for missing name of the exception class, when @throw is used.
    Also fixes for:
    SDK-17212 - Add a line feed between messages in the ASDoc validation_errors.log file.
    SDK-17242 - The Constants.as and GlobalFunctions.as classes from system classes need to have their content added to __Global__.xml
    SDK-17256 - For methods of the mx.components.Group class, args or return values of type Object do not appear in the ASDoc output.
    QA: Yes
    Doc:
    Tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17212
    http://bugs.adobe.com/jira/browse/SDK-17242
    http://bugs.adobe.com/jira/browse/SDK-17256
    Modified Paths:
    flex/sdk/trunk/asdoc/templates/class-files.xslt
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

  • What is this yellow yield sign with (!) on the screen, diagonal lines

    Hello,
    I've got a yellow yield sign icon with an exclamation point on my video, and diagonal lines running across the light areas of my image. What is that, is it important? How do I get rid of it?
    Sometimes there is also a green circle with a check mark.
    Thanks
    Bob

    Psst. Your excess luma is showing.
    Don't forget to search:
    http://discussions.apple.com/thread.jspa?messageID=1077165&#1077165
    Dual 2.5 G5   Mac OS X (10.4.3)   4 GB RAM, DeckLink HD Pro, XRAID

  • HT203254 I have this problem on my macbook pro. I live in Sault Ste marie, ON. I took it to Genius Bar at the Apple Retail Store at Eton Center Toronto. They said it cannot be fixed for free, It would cost me more than a grand. I scared & run aways. Haha.

    I have this problem on my macbook pro. I live in Sault Ste marie, ON. I took it to Genius Bar at the Apple Retail Store at Eton Center Toronto. They said it cannot be fixed for free, It would cost me more than a grand. I scared & run aways. Haha.I think I should call & set up an appointment at apple third party service provider in my city. wish me luck

    Ah, but there's this caveat:
    Apple will continue to evaluate the repair data and will provide further repair extensions as needed.
    And a number of folks have found sympathetic managers and had the 2008 logic boards replaced, even after four years.
    Clinton

  • HT204210 Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!

    Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!

    Apple Enterprise Support is aware of this issue. They have specific instructions which attempt to remediate the issue, however, attempting on two different MBP laptops, so far has not succeeded.
    The problem to be specific is - hang at login. The Filevaulted user account gets its password entered, then the "progress bar" mid screen will be seen to halt, never resuming. NVRAM resets dont necessarily cure this issue, but turning off FV2 definitely does.
    We are seeing this with 10.10.2 fully Apple-SUS updated machines.
    Feedback has been sent to Apple over this as well.
    Im recommending:
    a. turn off FV2 until such time as a Apple provided update cures it
    b. consider the Sophos WDE solution if WDE is absolutely required (disclosure: I havent attempted this, not sure about its workability)

  • The search feature in Yosemite only finds a few files when I know many more exist. Is there a fix for this problem?

    The search feature in Yosemite only finds a few files when I know many more exist. Is there a fix for this problem?

    Are you searching for file names or content?  If it's the latter dDownload and run Find Any File to search for the same file names.
    FAF can search areas that Spotlight can't like invisible folders, system folders and packages. If there are files with those file names on the hard drive FAF will find them.
    In any case reindex the HD for Spotlight according to this Apple document: Spotlight: How to re-index folders or volumes - Apple Support

  • My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • [svn:fx-trunk] 10076: Redo fix for SDK-23080, since the last one introduced more problems.

    Revision: 10076
    Author:   [email protected]
    Date:     2009-09-08 18:04:12 -0700 (Tue, 08 Sep 2009)
    Log Message:
    Redo fix for SDK-23080, since the last one introduced more problems.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-23080
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RectangularDropShadow.as

    If you're still using Buckminster 3.6, I strongly suggest switching to 3.7 - it has a number of bug fixes and improvements. This applies to both headless, and the IDE (assuming Eclipse 3.7 Indigo).
    Matthew

  • Is Apple even close to a fix for the fix of the IOS 8.0.2.  i have lost all my pictures, contacts and more particulary my ability to access wi-fi.l

    Is Apple even close to a fix for the fix of the IOS 8.0.2.  i have lost all my pictures, contacts and more particulary my ability to access wi-fi.  I have switched to a Droid and not sure I would ever go back to an iPhone again.

    I had the same issue until I updated my apps through iTunes. I had over 100 updates, but none of them showed on my iPod. After they updated everything started syncing like it is supposed. Go to the apps library and check for updates. After everything syncs leave your iPhone/ipod/ipad connected if the spinning arrows at the top is still spinning. It means that things are still being added. If you go to settings > general > about, you will see it loading songs, videos, photos, etc. If you back out of "about" and then go back to it you will see the numbers for each one change.

  • When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

    When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
    The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
    Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
    MacBook Air (mid 2012), OS 10.10,  HP Officejet 7500a

    This is what appeared on Console:
    11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
    timestamp: 12:42:32.557 Wednesday 12 November 2014
    process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
    code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
    #exceptions
    11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
    11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
    11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
    11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
    11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
    11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    Not sure what any of this means.

  • IMac 8.1 3.06 GHz w/6 MB Ram, Lion and dead HD? all I get is "Gray Screen w/wirlie gig" but now for a new twist a circle with a diagonal line, like don't go. Is this a DEAD HD?

              I have a iMac 8.1 3.06 GHz w/6 MB Ram, and was running Mac OS X 10.6.8. My 500 GB WD5000AAKS was about 90% full. I had an issue with the admin password, it would not accept any of my known passwords. I ran for a while on the fingerprint reader I had, we have two users on the machine in our home. I tried many attempts to fix this problem without success I came up with a plan. That plan was a new HD, used a 2TB Samsung. plan worked like a charm. Installed a 4 GB Ram Chip and the new Samsung, formatted it, loaded Snow Leopard, and loaded what was on my Time Machine backup all was good.
              This was early July, then Lion was available I was happy with what I had, I had 1.450 TB of free space. So, what the heck, lets spring for Lion, that even went well for a not even 2 weeks, enough that I had several Time Machine backups.
               Then monitor goes flash, flash then I try a re-boot same gray screen with whirlie gig that I had when the the HD in my MacBook Pro died. Put the old 500 GB WD back in and all was fine, ran for a day. It was OK except back to no password and full. Went down to my local computer shops here in Rayong Thailand and sprung for a New 2 TB WDXXX, put that in, used my Snow Leopard disk to format and load OS X 10.6.8. I though that all was good, the load from Time Machine was slow and the time remaining was changing all the time, took about 3 hrs for about 300 MB that where on the LaCie.
              Now I have a password issue, however it asks for a password reset that it will NOT take and I don’t even get that now. All I get is the infamous “Gray Screen w/wirlie gig” but now for a new twist a circle with a diagonal line, like don’t go. Is this a DEAD HD? I plan to re-install the old 500GB just to systems check and if all is well I will take the “NEW” 2 TB WD back for replacement. I am thinking that I should put the new HD in and format and load Snow Leopard then up date to Lion then do my Time Machine backup. The only problem is does the circle with the diagonal line mean something more? If so how does one recover Lion with no disk if that is what I need to do. Yes, I have tried control “R” on boot, nadda, no response, “mai dee” no good. Ideas, please.

    I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard.  It was totally updated with the latest from Apple when I bought and tried installing Lion.  The upgrade failed, shot my OS and I couldn't boot.  Had the constant spinner on a grey screen..  did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck.  Crashed my system one too many times.  I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac.  I have the stuff running on my Mac Pro but have yet to notice anything impressive.  I've always used F3 and really didn't require Mission Control.  Just open you app folder for launch pad... duh?  I use the hot corners anyhow.  As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow.  I don't like the new Mail either..
    As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

  • ITunes 7.0.1.8 experiences - Here's what got fixed for me...

    After news of the iTunes 7.0.1.8 update broke out today, I downloaded it and have used it for a little while.
    I'd thought I'd share my experiences so far, but please take note that I did not do any CD burning/importing tests, nor do I own an iPod to sync content to or a 5.1 set of speakers to play songs with. I have heard that this update dramatically fixes the slow recognition and sync times for iPods and that there is better speaker recognition for surround sound systems, but I can't personally confirm this.
    My current audio settings in QuickTime are at 48kHz, 16-bit, QuickTime Music Synthesizer. Safe Mode is disabled. These have been my withstanding settings since iTunes 6. To my knowledge, all sound drivers and video drivers are up to date. Hardware acceleration is at full, and DirectX is also up to date.
    Some problems I noticed in iTunes 7.0.0.10, in no order - and whether they've been fixed or not in iTunes 7.0.1.8:
    Problem: Cover Flow view was slow to respond and had album art rendering issues. I didn't get the diagonal lines, but it definitely bogged down my system. Most likely a memory leak.
    With 7.0.1.8: Partially fixed. CPU usage doesn't skyrocket as much, but the flow animations still stutter and album art rendering still lags. Once the art is loaded into RAM, however, Cover Flow is as smooth as ever and does not max out at 100% CPU for me.
    Problem: Download manager was unresponsive. iTunes would crawl when playing a song and downloading something, as menu commands, pausing/unpausing, etc. was delayed by up to a minute. CPU usage at 100%.
    With 7.0.1.8: Mostly fixed.The download manager is now noticably speedier, and is responsive to user inputs with pausing downloads, scrubbing songs, etc. However, CPU usage is still at 95%-100% when a download is running.
    Problem: Gapless playback caused distortion.
    With 7.0.1.8: Fixed. Gapless playback now works correctly and seamlessly, without causing distortion in the first or last few seconds of a song or delaying playback.
    Problem: Audio playback became distorted and skipped when running any other applications, such as a web browser.
    With 7.0.1.8: Partially Fixed - Your results may vary. Audio no longer messes up horribly anymore -- even when the voume is less than 100% -- which is great. However, small skipping is still apparent when browsing in Firefox or even in the iTunes Store. This happens sporatically, however, as I'm browsing now and there is no studdering, though minutes ago browsing caused some skips. CPU usage spikes to 100% momentarily when this occurs. Nonetheless, it is still a MAJOR improvement from before, and now I believe that skipping exists due to my only having 256MB RAM in this PC. Your results may vary.
    Problem: Newly downloaded album art did not actually get embedded into the music file, and iTunes didn't find album artwork for tracks that were in the iTunes store.
    With 7.0.1.8: Not fixed. Downloaded album art from iTunes 7 is not embedded into the actual file, and needs to be copy-pasted back in the Artwork tab of the "Get Info" window. One non-related fix, though, is that album art can now be manually added in the album viewer on the bottom left of the window for multiple tracks at once. For downloading artwork (I did not set this as 'automatic' in my iTunes preferences but did it manually), I recommend matching the store listing 100% with track numbers, capitalizations, etc. and making sure the ID3 tags of MP3 files are v2.2 or higher.
    Problem: At random times, checkboxes did not actually check or uncheck when clicked on; this was especially true in the Podcast library. Only a manual right-click menu selection would check or uncheck an item.
    With 7.0.1.8: Fixed. No more checkboxing issues so far.
    Problem: Visualizer size setting in Preferences -> Advanced tab (Small, Medium, Large) did not actually take effect.
    With 7.0.1.8: Not fixed. The visualizer still plays in the "large" setting, no matter what the setting is; I believe this is a bug. In addition to this, when in Cover Flow view and changing to the visualizer, Cover Flow leaves an intrusive snapshot on top of the visualizer, which isn't fixed until switching out of the visualizer and changing back to the list or album view.
    Problem: Video playback stuttered when viewing on-screen controls, and the controls didn't appear when the mouse was over the video and iTunes was in mini player mode or minimized. Clicking on the video at that point stopped playback and closed the video window.
    With 7.0.1.8: Not fixed. While video playback is snappier in iTunes 7 in general, this little oversight hasn't been touched yet. I also believe part of it is because of a lack of RAM on my computer, but would've liked to see more smooth playback like what was found in the last revision of iTunes 6, in addition to the added controls.
    Problem: Adding ratings from within the library is a little hit-or-miss; I have to click on a certain edge of the star to select it.
    With 7.0.1.8: Not fixed. I have to click pretty firmly on the ratings column in my iTunes library, or just do it manually by right-clicking or doing it in the Get Info window.
    I think that covers most of what I personally found in the previous version of iTunes 7. I didn't previously have the importing problem or settings fail to save (sans the visualizer), however. (Feel free to add to this thread with your experiences if you'd like.)
    Dell Dimension 2400 Windows XP Intel Celeron 2.59GHz, 256MB RAM

    UPDATE/EDIT FROM PREVIOUS POST:
    Ok. The new 7.0.18 does repair the volume slider audio issue. HOWEVER, Simply installing the new update (at least for me) did **NOT** fix the problem. After posting my previous post, I tried to remove Quicktime and iTunes completely and try reinstalling.
    It turns out that when I uninstalled Quicktime from Add/Remove Programs, it didn't remove all the Quicktime files and it was not reinstalling Quicktime afterwards!!
    I only noticed when I downloaded the standalone version of Quicktime and tried running it and it said a "newer version" was on my computer, though it did not show up on my Add/Remove Programs file listing.
    So I looked in the usual places and found that I had a Quicktime folder remaining in the Program Files folder and one in the C:\Windows\system32 folder. I also had to manually remove the following files from the C:\Windows\system32 folder:
    Quicktime.qts, QuickTimeMusicalInstruments.qtx, the Quicktime.Resources folder, QuicktimeVR.qtx and the QuickTimeVR.Resources folder.
    The main problem is that iTunes didn't let me know there was an issue with the QuickTime installation. It just wouldn't run iTunes. There should have been a notification.
    Anyway, after all this, I reinstalled iTunes fresh and checked the volume slider and LO' And Behold! The volume slider issue was repaired.
    However, there is a LOT of skipping occurring that never happened before. Not sure what's up with that. CPU usage stays low and then I get a few skips per minute...UNACCEPTABLE!!! That didn't happen before and that issue will still need to be fixed. Until then, back to WinAmp. Thx a LOT Apple...you *#^@ing hosers!

  • Diagonal lines on coverflow album art

    I recently upgraded my laptop to iTunes to 7.0 and everything is fine except that when using the "coverflow" to go through my library, every piece of album art (and the generic music note for when there is no artwork) has a very thin diagonal line through it. It also occurs when I'm looking through movies on the iTunes store. I downloaded it on my desktop and did not have this problem. Is there a way to fix? I tried to re-install the update, but it didn't fix the problem. Thanks.

    Nope. Coverflow simulates flipping through your album collection, so there should only be one piece of artwork per unique album in Coverflow. If you're seeing ten pieces of artwork, iTunes thinks "Tom's Album" is actually ten albums for some reason — perhaps the tags don't quite match?
    If you move those 700 songs into a playlist, and restore their original album names, iTunes will see them as different albums, and you'll be able to see all the cover art in Cover Flow.

Maybe you are looking for