CpComndShowPlaybar Causing Timing Issues

This is driving me batty... Please picture in your mind 3 slides within Cp 5.5 for PC.
Slide 1 is a standard text slide with invisible captions and graphics.
Slide 2 is a Knowledge Object (True/False question which is not tracked)
Slide 3 is just a splash transition title screen into the next chapter with a huge graphic taking up the entire page.
Not sure what the problem is, but I have noticed that even though I have made the splash transition screens only 4 seconds long on the timeline, it is lasting as long as 15 seconds. Actually, I think I do know what the problem is.
An Advanced Action command is used to turn off the control bar on the quiz screens on Slide 2:
On Enter: Assign
Assign: cpCmndShowPlaybar
With: 1
On Exit: Go to the Next Slide
...and an Advanced Action command is used to turn the control bar back on on the splash screen on Slide 3:
On Enter: Assign
Assign: cpCmndShowPlaybar
With: 0
On Exit: Go to the Next Slide
I believe this is causing the problem, because on an earlier Splash page (which doesn't have a Quiz page before it) - has no problem in a delay of 15 seconds and no need to remove the control bar. It just lasts the 4.5 seconds as indicated on the timeline, and that's it.
Is there any way to prevent this delay from happening?
Thanks in advance for your help in this matter -
Sincerely,
Kevin
@kstagg

Yes, am also getting the latency when it is running on the hard drive with quiz reporting turned off. I haven't published to SCORM or anything yet. The quizzes aren't "quizzes" per se so much as knowledge objects at the end of each section that will not be tracked at all.
Eventually, the course will be published to SCORM and onto an LMS.

Similar Messages

[svn] 4859: -Fix packaging timing issue that was caused by the rebuilding of the air applicationupdater .

Revision: 4859
Author: [email protected]
Date: 2009-02-05 10:15:22 -0800 (Thu, 05 Feb 2009)
Log Message:
-Fix packaging timing issue that was caused by the rebuilding of the air applicationupdater. The recompiled files would get laid down properly only to have the old files put back down on top of them. I also made sure the build directory was removed after updateAIR ran so it would not be included in the package
-removed bundles.properties from the wireframe project
bug:SDK-19128
qa:yes
doc:no
checkintests:pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19128
Modified Paths:
flex/sdk/branches/i10/build.xml
flex/sdk/branches/i10/frameworks/build.xml
Removed Paths:
flex/sdk/branches/i10/frameworks/projects/wireframe/bundles.properties

Hi Chris,
I have confirmed this is an AIR SDK 13.0.0.83 bug.
I have reported this bug to Adobe Bugbase, and I also included the workaround:
https://bugbase.adobe.com/index.cfm?event=bug&id=3750892
The workaround is:
Simply comment the <externalSwfs> tag in your -app.xml will solve this bug, like this: 
DarkStone
2014-04-28

How to fix the Timing issue in Discoverer reports

Hi,
While running the discoverer report in Discoverer plus is taking more than 1 hour to complete( Gen.time + Extract to excel)
where as the same report completes quickly in discoverer desktop.
how to fix the timing issue in discoverer plus
Thanks
Srinivas

Timo Hahn wrote:
There is a problem with autoHeightRows and columnStretching used together in 11gR1.
Have you tried without columnStretching?
Or have you tried if it works in 11gr2?
TimoHi Timo, Thank you very much for taking time to respond to my question.. :)
Back to my question...
I tried removing the columnStretching although my requirement really requires this but no effect really happens even if I remove this.
Based on my investigation on the generated HTML, I notice the following items:
1. A table is being wrapped in a div that is being set at a fixed height.
2. On first load, if your autoheight rows is set to 6, the framework is setting a height of 96px to the div. This height would almost cut the last row of the table.
3. If you try to refresh the page or try to re-PPR the component, the framework resets it to 102px which causes the last row to be fully displayed.
My only concern is that IE is perfectly displaying this while Chrome and FF are having problem.
Based on my understanding, the framework is messing up the height only on first load. Not sure but this is how I see it. I am really not confident also on my findings
and I would most likely hear other's comment.
Thanks.

Questions about phase difference (possible timing issue) RC circuit

Hello,
Below is the program I am using to measure the phase difference in an RC circuit. Simply put I generate a 2kHz sine wave in LabView and send it to the circuit using an Analog output. Then I measure the output sine wave using an analog output.I also measure this using n oscilliscope. I cna clearly measure the phase difference with the oscilliscope and know it to be approximately 1.4 radians.
Issues with the program:
Different phase difference measured each time the program is run for the circuit. It is also never correct.
Possible causes:
You will notice by looking at the vi I measure the phase from the signal generator. Should I be using a second analog input to measure the sine wave as it is outputted at the start of the circuit?
I mainly think that it is a timing issue. While the phase difference is constant each time the program it varies each on run. So the time each tone measurement begins its first measurement seems to be different each time and causes this different phase reading.
The card I am using is a PCI 6221, is there a timing issue related from switching to input and output acquistion or are they seperate.
Is there anyway to ensure that both tone measurements are measuring phase at the same point in (actual) time?
I would really appreciate any advice or alterations on the program anyone could offer me (I am a college student and LabVIEW is not on our curriculum so I have no support, yet I am using it for my project (D'oh!))
Solved!
Go to Solution.
Attachments:
RC Circuit Test.vi ‏271 KB

I would certainly acquire two signals. Feed the analog output right back into an analog input and then your filtered signals in another.
Initially, I would feed the analog output into both analog inputs and measure the phase delay due to the multiplexed A/D on the card. Once you have that measurement, you can feed in the filtered signal and then measure the phase difference of that signal.
Randall Pursley

Error message is not telling which field causing the issue!

Hello
I am developing the Adobe Interactive Form and launching this form from WebDynPro ABAP application, fine.
This form has tonns of dropdown fields, mandatory fields, greyed out fields. Fine.
I am filling the list the drop-down fields from webdynpro ABAP, but, i am filling list for only 80% of the drop-down fields, rest 20 % is not filling at all (bcz, business want to have those 20% dropd-owns on the form by thinking going further they require, this moment they dont need so they dont want to fill the lists)
Now the form is launching on the browser, fine. But when user submits it i am getting the below erro:
The Entered Value Is Not on the List of Valid Values. (I am guessing this error is talking about the DROPDOWN fields only)
I hv tonns of drop-down fields, so, its very difficult for me to go and trace each and every drop-down fielld!! But, i checked all the populated/entered values in the drop-down fields, they are all fine. Sone dropd-down fields are GREYED OUT, they are defaulted from webdynpro ABAP
Pls. let me know How can know which field/drop-down is causing this issue? Wht are the possible causes for this error? Error is not telling which fields is making issue?
How can i trace and how can i fix it, pls. let me know
Thank you

Thank you for your tips.
But, as of my knowledge every thing (case sensitive, list box entries) are fine, not sure, why am getting this error! I will double chk again.
But, thing is.... actually, i have 4 pages, depending on the logged in user, i will HIDE the pages (say, for me the 3 rd page will be hidden), i am hiding the pages by using JavaScript in the form.
So, this error is not coming if i execute/launch all the 4 pages, but, its coming if i hide any page for any user!!
By chance, do we debug to figure out which FIELD is CAUSING issue/this error?
From where this message is coming, i mean, from the SAP's JAVA stack? Wht is the message ID and #?
or is it Adobe's/Form's error?
Thank you

My macbook pro keeps freezing and shutting off when I am browsing the web on Safari. How can I figure out what is causing this issue?

For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black. I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots. I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit. Any suggestions of where to start to solve this issue?
Thanks!

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Could the replacement of a fan on a graphics card cause OS issues?

[Dangit - I unintentionally posted this in the iMac forum first - meant to post it here]
OK I suppose it's a bonafide long shot that my replacing of an intermittently malfunctioning fan on a graphics card could cause OS issues, but I've had something immediately crop up after the replacement (crippling issues with Logic's 32-bit audio unit bridge), and they effect older projects that were previously stable, so I figured I'd ask for the heckuvit.
Repairing permissions hasn't helped - I'm just starting to ponder whether to reset PRAM, reset SMC, boot from an HD clone, try reinstalling the old fan, etc., in order to figure out the problem....
BTW - the graphics card is an Nvidia GT120.

Go out and buy an Apple ATI 5770.
What requirements does Logic have for video, and are you still on 10.6.8?
The GT120 is 512MB but low-end card.
If you do need more performance:
SHOOTOUT WITH THE 'SHARKS': Sapphire Radeon HD 7950 for Mac versus really fast alternate GPUs

Could simply replacing a fan on a graphics card cause OS issues?

OK I suppose it's a bonafide long shot that my replacing of an intermittently malfunctioning fan on a graphics card could cause OS issues, but I've had something immediately crop up after the replacement (crippling issues with Logic's 32-bit audio uinit bridge), and they effect older projects that were previously stable, so I figured I'd ask for the heckuvit.
Repairing permissions hasn't helped - I'm just starting to ponder whether to reset PRAM, reset SMC, boot from an HD clone, try reinstalling the old fan, etc., in order to figure out the problem....
BTW - the graphics card is an Nvidia GT120.

Go out and buy an Apple ATI 5770.
What requirements does Logic have for video, and are you still on 10.6.8?
The GT120 is 512MB but low-end card.
If you do need more performance:
SHOOTOUT WITH THE 'SHARKS': Sapphire Radeon HD 7950 for Mac versus really fast alternate GPUs

[svn:bz-trunk] 17102: Rewrite all ImageSnapShot tests to avoid any timing issue on various app server .

Revision: 17102
Revision: 17102
Author:   [email protected]
Date:     2010-07-28 11:48:20 -0700 (Wed, 28 Jul 2010)
Log Message:
Rewrite all ImageSnapShot tests to avoid any timing issue on various app server.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureBitmapData.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImage.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageJPEG.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageScaleLimitedFalse.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageScaleLimitedFalseJPEG.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageScaleLimitedTrue.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageScaleLimitedTrueJPEG.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testEncodeImageAsBase64.mxml

I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code>

CS 5.5 coexist with CS 6.0 causes FrameMaker issue - can't import SVG file!

Due to some project demands, we installed Adobe CS back to 5.5 on a computer which has CS6.0 already installed. After the installation, everything worked in normal except one problem - we could not import SVG into FM file for all versions of FrameMaker on this computer.
Does the coexistence of CS 5.5 and 6.0 cause this issue? Or can CS 5.5 coexist with CS6.0 on a same machine? or any other reasons? Please comments!
Thanks in advance for your help!

Due to some project demands, we installed Adobe CS back to 5.5 on a computer which has CS6.0 already installed. After the installation, everything worked in normal except one problem - we could not import SVG into FM file for all versions of FrameMaker on this computer.
Does the coexistence of CS 5.5 and 6.0 cause this issue? Or can CS 5.5 coexist with CS6.0 on a same machine? or any other reasons? Please comments!
Thanks in advance for your help!

Two Fx 4 windows open at the same time causes usability issues

When I load two instances of Firefox, I get multiple issues with the second instance usability, display, and hot keys.
The issues are as follows:
# Menubar/Toolbar appear differently
# Back/Forward buttons do not work
# F-Keys no longer Function
# Favicons show old, cached icons
Please see screen grab of my two monitors with two instances of Fx 4 open, but the I played with my toolbar settings to get it to look somewhat ok.
http://www.travellingwebguy.com/images/Fx-4.png
This is what happens when I open a second window, and do not mess with the toolbars:
http://www.travellingwebguy.com/images/Fx-4-2nd-window.png
This issue was not happening with Fx 3.x.x.
I am using a custom Persona, but I have changed the Persona a few times and I still get the same result.
I've removed all incompatible extensions and upgraded all the ones that needed upgrading.
Not sure what the issue is here, but would love to troubleshoot it down if possible. Please let me know if any other info is required!
Cheers
Tim

Exact same issue here. Also, the add-on manger will not launch.
I thought it might be an add-on causing these issues, but only one out of my ten or so addons work in FF4, and I disabled it with no success.
This is a huge issue for me. I attempted to uninstall FF4 and go back to FF3 but I can't find an install file for FF3.

XFi-2- Latest firmware (1.20.08) has caused some issues on 32GB model...

HXFi-2- Latest firmware (.20.08) has caused some issues on 32GB model... When I started my PC last night, it notified me that new firmware was avaliable so it downloaded it and installed it on my Xfi-2 32GB
According to the release notes, it was to add support for the 64 GB model as well as some general improvements.
I can't determine what the latest improvements were (anyone have any clues ) and the UI seems the same.....the only things that have changed are that my applications no longer work (when I go into the applications shortcut, it says there is no valid content: I haven't touched these folders etc and they are still populated with the three standard apps as far as I can tell)
The other thing (which may not be related to the firmware upgrade) is that my photos shortcut now pulls up some of my music folders that contain album art. Is this a feature or a bug (I don't want it to happen, I just want it to show photos within the 'photos' folder on the device).... I think it may have been caused by me simply dragging and dropping music folders onto the device using windows explorer rather than going through Centrale (slow!)
Cheers

Hi Timmo.
What release notes are you reading? I have seen no reference to improvements other than adding support for the new 64 GB model on this firmware version. From the description of the problems you have, it seems that your player has some sort of file system corruption on the internal flash. I would suggest reinstalling the firmware on your device after formatting it (formatting the device only should be enough, I think).
The size of the new firmware release, double than the size on the previous one, means that it probably has new features and applications that will be enabled on the future; however I doubt it means it has new features right now and hope it does not means we have two firmwares (on for the 64 GB model and other for the previous ones) as the SRM/AlphaBIOS pair on the Digital Alpha systems (an ugly hack on these superb computers, in my humble opinion) -- by the way, the new firmware does not require more space on the internal flash (I have 5077 MB available on mine with all firmware releases).
The behavior you describe about album art being shown on the photos shortcut happens with older firmware releases too; I prefer album art embedded on the audio files instead of being available as another file. I agree with you, only pictures under the photos directory should be shown as images.
Cheers.

How do we change itune and icloud accounts? My wife and I have seperate accounts but she cannot access hes, only mine. This causes many issues like facetime, text etc. Do we have to reset her devices and start fresh?

How do we change itune and icloud accounts? My wife and I have separate accounts but she cannot access hes, only mine. This causes many issues like face time, text etc. Do we have to reset her devices and start fresh?

I think this may be the answer.
http://support.apple.com/kb/HT5621

Ea6300 causing network issues when connecting to web browser on my Mac

I have had my ea6300 for two months and its causing major issues when connecting to my web broweser before I throw it out the window can someone give me some help.

Hi bigtimer30, what do you mean by “it’s causing major issues when connecting to my web browser”? Do you mean that the MAC computer is no longer able to access the internet? If yes, is it with both wired and wireless connections? Is this happening to all of your devices? Or just that specific MAC computer? If all the other devices are still able to connect except the MAC, I suggest that you do a power cycle on the computer (if you haven’t done it yet). And you’re having difficulties with the wireless part, try to hard wire the computer straight to your router, and check if you experience the same thing. If the wired connection is okay, you may try playing with the router’s wireless channel. Better if you could give more details for us to give you more suggestions.

HT4009 I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.

I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.

Have you tried contacting iTunes Support and asking them ? We are fellow users here on these forums, it could be due to a number of reasons, we won't know which one.
http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

CpComndShowPlaybar Causing Timing Issues

Similar Messages

Maybe you are looking for