CProjects HR Integration: Data format synchronizing
Hi Experts,
Going into the HR Integration synchronizing we are finding an error on the iDocs:
Filtering data for central person 00070355 (IDoc 0000000000000016 , segment 000001 - )
Message no. HRALX00_ORG512
We suspects from some CRM threads that we are missing some data synchronizing between the two systems. How can this data format comparing / synchronization can be done from a cProjects 4.5 system?
Thanks in advance.
Best regards,
Neil
Hi,
Pls check out OSS Note 1052449 - HRALX: Employee is linked with BP without role "Employee".
Regards
Sejo
Similar Messages
-
Date formatting on updateable report
I have an updateable report with a date column. I would like the user to be able to use mm/dd/rrrr format.
Is this possible?
Thankswhen you use our tabular form wizard to generate a tabular form, you're somewhat limited in what you can do to the data that's being selected out of your table. it's currently set up that way because we do some optimistic locking stuff behind the scenes to maintain your data integrity for you. there might be other ways to deal with your specific request, but this approach seems easiest to me assuming that changing your db's default date format isn't an option:
put html db pl/sql processes on both your page rendering and page submission sections that set your nls_date_format for each of those db sessions. so both of your new html db processes would be of type "PL/SQL Anonymous Block". one would fire with a process point of "On Load - Before Header" and the other would fire "On Submit - Before Computations and Validations". both processes would look like...
begin
execute immediate 'alter session set nls_date_format = ''mm/dd/rrrr''';
end;
...and after those two changes, your tablular form should handle dates in the mm/dd/rrrr format you're looking for.
hope this helps,
raj -
BestPractices Error - Set Decimal Notation and Date Format
Hello everyone,
first of all, I don't know, if this is the right forum for my question, but I hope so
We're trying to implement the Best Practices Scenarios to a new SAP ERP System.
We did the steps of the following url, where everything worked fine: http://help.sap.com/bp_dm603/DM_DE/html/index_DE.htm
Then we integrated Best Practices 603V8 via Solution Builder (TA: /n/SMB/BBI). But now, when we switch to Implementation Assistant and try to activate Scenario DE_109 --> 100(DE) --> Folder USERSETTINGS, we receive the following error in report /SMB99/SU3_O009_B32: Set Decimal Notation and Date Format.
So we called transaction SU3 and changed Decimal Notation and Date Format, but the error still exists.
Anybody knows what to do?
Thanks for your help!
Best regards
Patrick
PS: We executed Testscript /SMB99/SU3_C009_B32 via TA SECATT and there is the error:
TCD SU3 0,292 sec N Maintain Users Own DataHi,
Follow below link to verify whatever you have done is correct:
http://help.sap.com/bp_bblibrary/600/Documentation/B32_BB_ConfigGuide_EN_MX.doc.
Thanks
Sunny -
Hello,
BW query connected to universe.
BW query holds the date values in some of the characteristics-attributes which is of type 'date'.
When this imported to BO universe, the date type characteristics are appearing as 'character'.
This is causing problem when sorting the report.... it is sorted in alphabetical order but not in Date order.
When changing in universe as 'object properties' -> type -> Date. It is giving Error when running the webi report 'A database error occured. The database error text is: (CS) "Driver not capable" . (WIS 10901)' (or) when check integrity in universe.
How to make the type as date in universe for Time characteristics.
Thanks
Sreedh.Following are the version installed.
Universe Designer : 12.1.0.882
Webi Rich Client : 12.2.6.567
As mentioned in earlier notes.... Webi report connected to Universe to BW Query.
BW query has attributes of 0calweek and it has ValidFrom(date type). The ValidFrom is appearing as character format and the requirement is to treat ValidFrom as date format in BO (universe or in webi) so that customer can able to Sort by date. Since ValidFrom in universe changed to character format after the query connected to Universe, so ValidFrom is Sorting as character but not like date. Is there workaround to make ValidFrom as datetype in BO or anyother version support this.
Thanks
Sreedh. -
WCS showing mm/dd/yyyy date format in UK
WCS is showing dates in mm/dd/yyyy format despite being in the UK where it should be dd/mm/yyyy.
- Reports show it.
- When a Lobby Ambassador tries to add or schedule a guest user on WCS the date in the 'Start Time' and 'End Time' fields is shown in mm/dd/yyyy format (and is confusing for reception/admin staff who need to use it).
WCS is installed on a Windows 2003 server with latest updates and patches and all regional/international options are set to UK.
Is this something that can be changed from WCS settings or something that needs diving into Apache to fix ?
Regards,
Jen.Hi Jeniffer,
Basically the WCS uses U.S date format all over the
application.. the time in WCS is synchronized with the
server however the way we have designed and programmed WCS for date format
is in U.S fashion which is mm/dd/yyyy. This is the behaviour that WCS
has since day one and this date format cannot be customized.
Please contact your Accounts team and fee lfree to open up a
Product Enhancement Request (PER)..
this will help you!! lemme know if this naswered ur question!!
Please dont forget to rate the usefull posts!!
Regards
Surendra -
Hello,
I want to run cProjects CATS integration scenario. Can somebody share relevent documentation? I am using cProjects 4.5.
Regards,
Milind DumbreHi Milind,
For Integrating CATS need to make relevant settings in Project type.
Make settings in Data entry profile.
If cProjects & CATS (ECC) are on seperate servers ref Note 954860 - Setting up ALE to integrate cProjects with CATS.
You also need to have account integration & HR integration to use CATS with cProjects.
Ref the link for furthur details.
[http://help.sap.com/saphelp_ppm450sp04/helpdata/en/43/054880bbe822f5e10000000a1553f7/frameset.htm]
Regards
Sejo -
Hi
A sample web dynpro application displays information regardding Flight information with the flight date.
This application is integrated in portal too.
However, there is a requirement that end user can adjust the date format as yyyy-mm-dd or dd-mm-yyyy or mm-dd-yyyy format.
I changed these options in Windows Regional settings to different values for the short date and long date formats. Unfortunately these changes do not reflect in the iView.
Is ther any setting at the iView when developing the portal content or any other way to allow the user to see the date in the format he likes ? if yes, what needs to be done ?
Thanks
PrasadHi Prasad,
Try to use the browser locale setting instead of Windows regional setting. You can get the browser locale
setting from the below code
Locale locale = request.getServletRequest().getLocale();
Then use this locale data pattern and display date formats according to user browser locale settings.
Hope this helps.
Siva -
Hi Tim,
I am facing some issues with formatting the date using XMLP. The following is the sample XML data file i am using:
<LIST_G_HEADER>
<G_HEADER>
<QUOTE_HEADER_ID>1455</QUOTE_HEADER_ID>
<QUOTE_NUMBER>2027</QUOTE_NUMBER>
<QUOTE_VERSION>1</QUOTE_VERSION>
<QUOTE_NAME>Test GM Report - Rabindra</QUOTE_NAME>
<SOURCE_NAME>Fletcher, MR. Paul</SOURCE_NAME>
<QUOTE_DATE>27-OCT-2005</QUOTE_DATE>
<CURRENCY_CODE>GBP</CURRENCY_CODE>
</G_HEADER>
</LIST_G_HEADER>
The formatting i use for my date field i.e <QUOTE_DATE>, ends up either with NO formatting or giving me an error "[010906_114656657][][ERROR] Invalid XSD string: 27-OCT-2005 (XMLP Template Viewer)". The default formatting available with the form field dialog box (MS-Word) feature also doesn't work.
I have the following formatting for this field in the form field:
<?format-date:QUOTE_DATE; 'MEDIUM' ?>
When i read the user guide, it reads that the date should be in the canonical format i.e: YYY-MM-DDThh:mm:ss+HH:MM
However i am not getting the date from the base table's in this format. Is the error happening due to incorrect format or is there some other reason behind this? Please let me know, how can i overcome this issue.
Thx,
NitinAs i mentioned in another thread
substring function and date format
Please use this standards
<?xdofx:expression?>
for extended SQL functions or
<?xdoxslt:expression?>
for extended XSL functions.
Use like
<?xdofx:rpad(LAST_NAME),30, ’x’)?>
<?xdofx:Instr(’abcabcabc’,’a’,2))?>
<?xdofx:upper(char)?>
<?xdofx:lower (char)?>
<?xdofx:greatest ( expr [, expr]... )?>
ETC..... -
How can we give the Data Format (File Type ) in Runtime
Hi all,
How can we give the Data Format (File Type ) in Runtime for the following method,
cl_gui_frontend_services=>gui_download.
Thanks in advance
SriThere is a filetype parameter which you can set
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
* BIN_FILESIZE =
filename =
* FILETYPE = 'ASC'
* APPEND = SPACE
* WRITE_FIELD_SEPARATOR = SPACE
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = SPACE
* WRITE_LF = 'X'
* COL_SELECT = SPACE
* COL_SELECT_MASK = SPACE
* DAT_MODE = SPACE
* CONFIRM_OVERWRITE = SPACE
* NO_AUTH_CHECK = SPACE
* CODEPAGE = SPACE
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = SPACE
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
* FILELENGTH =
changing
data_tab =
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* NOT_SUPPORTED_BY_GUI = 22
* ERROR_NO_GUI = 23
* others = 24 -
Need to convert into date format
Hi all,
I need to convert '2008-11-26T11:07:38-06:00' [YYYY]-[MM]-[DD]T[HH]:[MM]:[SS][TIMEZONE]
in format 'YYYY-MM-DD HH:MM:SS'.
Thanks in advance.>
Thank you for your reply
But it is giving me output as '26-NOV-08'
And I want in format '2008-11-26 07:38' i.e 'YYYY-MM-DD HH:MM'.
>
Then you are not looking for a date, You are looking for a string.
The date format that gets displayed is dependent on nls_date_format parameter.
If you want a string in the format you asked, then,
SELECT TO_CHAR ( TO_DATE ( '2008-11-26T11:07:38-06:00', 'YYYY-MM-DD"T"HH24:MI:SS"-06:00"'), 'YYYY-MM-DD HH24:MM:SS')
FROM DUAL;Or if you just want the date to be displayed like that then
Do,
SQL> alter session set nls_date_Format="YYYY-MM-DD HH24:MI:SS";
Session altered.
SQL> SELECT TO_DATE ( '2008-11-26T11:07:38-06:00', 'YYYY-MM-DD"T"HH24:MI:SS"-06:00"') dt
2 FROM DUAL;
DT
2008-11-26 11:07:38
SQL> G. -
Changing date format at reporting level
Hello,
Will u plz tell me how can i change the date format at reporting level?
I want to display date in dd/mm/yyyy, but by default its showing mm/dd/yyyy.
Delta is already loaded in the system, so i don't want to disturb regular data loading.
Is there any way so that i can change the format of date.
Plz help me out.
Thanks,
Regards,
SteveHi steve
There r so many postings on the same topic
go through these previous threads
date format
Date format
u can find solution
regards
Ravi Kiran -
How to convert the numeric to date format
HI ,
We have created the date KF and selected the data type as DEC-numeric or counter and add in the cube.
the data for this fields in the cube are in numerics like 734.504, but when we execute the report it is converted in to date format dd.mm.yyyy.
My issue how this conversion is working in the backend while executing the report.
Regards.
venkataConversion is happening because of the type you had selected for the KF while creating it.
Check the type of the Key figure?
While creating the KF you might have selected the Type as Date and Data type -DEC : Counter or amount field with comma and sign.
that's the reason why you are getting the output values displayed in dd.mm.yyyy format.
For amount field - create a KF with type "AMOUNT" and unit -0currency or specify the currency of that region.
regards
KP -
How to get Date Format from Local Object.
Hi All,
I am new to Web Channel.
I need to know Date format From date of locale.
suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC.
Is there any way to get Date format from "Locale" object. I should get date format for local object
I get local object from "UserSessionData" object but how to get Date format from it.
I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format. I could not find example which show how to get date format from "Locale" object.
Any help will be appreciated with rewards.
Regards.
Web ChannelHi,
You can get it from "User" or "Shop" business object.
Try to get User or Shop Business Object as shown below.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.getUser();
char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
If you are seeing "1,234.00" then above code will return "."
I hope this information help you to resolve your issue.
eCommerce Developer. -
How to change default Date format in BO 6.5 SP4
A problem with date display has been reported to me by one of our users - in BO 6.5 - since installing SP4.
The default date format is now MM/DD/YYYY
I have tried to recreate this on my PC and have been able to confirm that this is the case.
Most of our PC's will have two versions of Business Objects on them - for 5.1.6 and for 6.5 - that is the case for my PC.
If I create a new BO document based on a spreadsheet with three entries in the spreadsheet as follows:-
20/01/2009 20-Jan-2009 20th January 2009
This displays in BO 6.5 as
1/20/2009 1/20/2009 20th January 2009
My PC regional setting is UK and the time displays DD/MM/YYYY
Can you advise how to correct this problem please.Hi Sebastien
Thank you for your response.
I haven't checked Dimension in universe because this is happening even when datasource is an Excel spreadheet - as per details in previous post.
I have looked for *.sbo files and found one for ODBC.sbo in the Version 5 folders on PC - with date format details in it which I've changed - that doesn't make any difference.
Any other ideas?
Regards
Linda -
Date format issue in oracle database
Hi,
Back end : Oracle 11.2.0.2.0
Front end : Forms 11g
In our application we are facing issue with TO_DATE('DD/MM/YYY') Date format conversion.
Example: TO_DATE(P_date,'DD/MM/YYYY') giving the result as 20-Dec-0009
In the above eg the Parameter P_date is coming as '20-dec-09' from the front end (forms 11g)
The Nls_date_format parameter at database level is set as 'DD-MON-RR'
Its working fine after changing the conversion as TO_DATE(P_date,'DD/MM/RRRR') .- If we do like this , we need to change in many places , so instead of doing this, is there other solution wrt database settings/Application settings where we can change and fix this issue
pls help us to solve the issue.
Regards.
sathish k892913 wrote:
Hi,
Back end : Oracle 11.2.0.2.0
Front end : Forms 11g
In our application we are facing issue with TO_DATE('DD/MM/YYY') Date format conversion.
Example: TO_DATE(P_date,'DD/MM/YYYY') giving the result as 20-Dec-0009
In the above eg the Parameter P_date is coming as '20-dec-09' from the front end (forms 11g)
The Nls_date_format parameter at database level is set as 'DD-MON-RR'
Its working fine after changing the conversion as TO_DATE(P_date,'DD/MM/RRRR') .- If we do like this , we need to change in many places , so instead of doing this, is there other solution wrt database settings/Application settings where we can change and fix this issue
pls help us to solve the issue.
Regards.
sathish kWell the solution is right in front of you. As you say, your database environment is set to DD-MON-RR so your database is set to use 2 digit years (something most people moved away from with the millenium bug more than 10 years ago now). You can either change all your code to use RRRR as you've found, or change your database NLS setting to DD-MON-RRRR and change your front end application to pass you a date with 4 digit years so you get e.g. '20-dec-2009'.
So many people worked hard to resolve the millenium bug issues all those years ago, but still we have people, all these years later, who want to reintroduce the problem. So sad.
Maybe you are looking for
-
Portal Forms are not displayed in the new migrated environment.
Hi All, We have a distributed Portal environment. Application server and Portal Repository running on one system(System1) and one more portal repository and portal components existing in anothor system(System2). Through DAD we connect to System2 and
-
IPod cannot be updated/restored/ejected--files in use by another app
Since I downloaded iTunes7, I cannot update, restore, or eject my iPod from iTunes. I get the error "<iPod name> cannot be updated(restored, ejected) because it contains files in use by another application." I'm still able to sync music and tv shows
-
Creating address labels of various sizes
I want to be able to create labels that fit standard blank labels that are produced by Avery. For example, a page of ten 2" X 4" white blank mailing labels can be filled out using the proper template layout that MS Word provides. Does anyone know how
-
What is the use of targetNamespace in the WSDL file and what goes into it
I am not sure how is targetNamespace useful in WSDL definition. Are there any rules for putting value into that attribute. My code generator works for any value. For example, Both the following code snippets work. <xsd:schema xmlns:xsd="http://www.w3
-
Mail is not displaying some messages... just getting "A's"
For some reason my mac Mail isn't properly displaying emails... help!