CQ 5.6.0 to 5.6.1 upgrade failing on Tomcat7 restart
All - wanted to know if anybody is having a similar experience in upgrading from CQ (AEM) 5.6 to 5.6.1, and whether you could suggest a remedy.
The problem we're having with 5.6.1 can be replicated easily on an AWS Linux instance installing a fresh 5.6.1 installation (i.e. bypassing any upgrade that would happen by installing 5.6.0 first) and following the instructions provided by AEM at https://dev.day.com/docs/en/cq/current/deploying/installing_cq.html#Tomcat%207. Steps to replicate:
1. [OK] Launch a fresh AWS Linux installation using the latest AMI provided by Amazon
2. [OK] Install Oracle Java (1.7.0_25) and Tomcat 7 (7.0.40 - which is the latest version provided by Amazon); Tomcat 7 is configured to use oracle Java
3. [OK] Follow the instructions provided to configure tomcat7 and AEM author
4. [OK] Visit the login page on the AEM author - this works
5. [OK] Stop tomcat7
6. [OK] Start tomcat7
7. [FAIL] Visit the login page on the AEM author - this hangs, telneting to the HTTP port used by tomcat doesn't connect
So basically everything is fine until you restart Tomcat. The same behaviour is observed when doing an upgrade - so doing an inplace upgrade from 5.6.0 to 5.6.1 succeeds but breaks when the tomcat service is restarted.
All comments warmly received. Thanks
Hi Sham - tried that but in CRXLite there is nothing resembling cqse-httpservice in /libs/system/install; we only have the following:
com.adobe.granite.monitoring.core-0.3.6.jar
org.apache.sling.jce.resource-2.2.4.jar
org.apache.sling.tenant-1.0.0.jar
Similar Messages
-
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run -
Hi,
I cant seem to install anything on my 5800XpressMusic for a sudden, it keep saying "Unable to perfom the operation, another operation is in progress" when I try to install any application, I dont have any other progress in use, why does it keep saying that when I dont!?
I do have the latest software installed.
Thank you in advance for your help
Solved!
Go to Solution.remove the memory card and restart the phone and try again
if it still exists, so backup your phone and soft reset your phone *#7370# and try again
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2 -
Hello,
When I sync music or podcasts onto my ipod nano (4th generation 16 GB) from my powerbook (OS X 10.4.11) using itunes (9.0.2) it appears, on the summary page of itunes, to be downloading into the correct blue audio folder however once the ipod is ejected no music or podcasts can be found. Once reconnected and on the summary page of itunes, the downloaded files appear to be in the incorrect orange 'other' file.
I have reset and restored the ipod several times. I tried to run disk utilities and got the following message: "Repairing disk failed with error Could not unmount disk"
Can anyone help me? Please?A simple solution found after many many hours of painstaking troubleshooting:
the problem seemed to be with itunes
trash itunes from the application folder
re-download itunes from apple website
restore ipod in itunes menu
after doing the above I was able to successfully download music again! Previous attempts to restore the ipod failed to solve the problem probably because of an issue with my itunes software.
I hope this saves other people all the time that I lost in the process! -
Tecra M9-136 - BSOD during Vista SP2 update
Tecra M9-136 asked this morning to update to Vista SP2 and during the process the BSOD 0x0000007E arrived. Restarted in Safe Mode and the installer continued and then finally reported that the update had failed - and reverted to SP1. This took most of the morning.
It will start in Safe Mode but on a normal boot-up, Vista SP1 gets through the fingerprint recognition and then fails with the same BSOD (it doesn't get as far as displaying the desktop).
The laptop has BIOS level 1.80. I've tried in Safe mode to install 1.90 but it tells me that the battery has insufficient charge and the power adapter isn't attached. Both untrue.
Stuck - need advice. Could this be a hard fault? Can't see how I can update anything if it's a soft fault.
thanksThe message with the BSOD mentioned checking BIOS and driver versions. Anyway, no change made to that.,
I tried System Restore but the only available restore point was the SP2 installation. I thought Vista was supposed to save a restore point every 24 hours even if nothing new had been installed.
I've now found in System Information / Windows Error Reporting several messages like this:
28/09/2009 12:08 Windows Error Reporting Fault bucket 0x7E_NULL_IP_DRVNDDM+57bd, type 0
Event Name: BlueScreen
Response: None
Cab Id: 0

Problem signature:
P1: 
P2: 
P3: 
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

Attached files:
C:\Windows\Minidump\Mini0928 09-04.dmp
C:\Users\me\AppData\Local\Te mp\WER-75660-0.sysdata.xml
C:\Users\me\AppData\L ocal\Temp\WER7D78.tmp.version.txt
& #x000d;
These files may be available here:
C:\Users\me\AppData\Local\Mic rosoft\Windows\WER\ReportArchive\Report06d1c4b5 -
Error in starting Adobe Bridge in Photoshop CS2
I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
I have reinstalled and click repair but to no avail
I followed Adobe Support Knowledgebase solution and run CMD and this appears:
c:Documents and Settings/Jesus M Ferraris>
then i entered the command
cacls c:\windows\installer /T /E /C /G administrators:F
but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
I also entered the next command
cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
still the same error as above appears, Please help, have I miss something or was my procedure correct...
P4, 512ram, WXP 80gHDVery useful.
Good Luck.
My
Si
tes -
Windows Vista: Ipod Error Message, no longer read by PCs
Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com
-
Iphoto crashing after using mini-dvi to video adapter
Hi, IPhoto on my Macbook is crashing. I can open it, then as soon as I scroll down it locks up and I have to force quit.
This started happening right after I used a Mini-DVI to Video Adapter cable to hook my macbook up to my TV. The adapter/s-video connection worked and I was able to see the video on the tv. But iphoto immediately locked up the computer when I went to slide show and now it locks every time I open it.
Any ideas?
Thank you:)
DorothyIt means that the issue resides in your existing Library.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Cannot open and update IPhoto after upgrading to OXYosemite
From the App store, I downloaded and installed OXYosemite. There are 2 more updates available: iPhoto and iMovie. When I try to upload them, the notice I get is "Update Unavailable with This Apple ID This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
I have 2 apple IDs when I inquire about my ids. Signing in App Store with either of them, doesn't resolve the problem. I get the same notice. iTunes, Mac, mobile downloads, all use the same apple IP, only for the computer downloads from App Store isn't working.
What should I do?
Thanks, SevI have the same problem and can't find out how to correct it. Unable to update iPhoto or iMovie .. I get the same message as above user. Help!
-
Mail wont open and restart cancelled by mail
when I try to open my e-mail it wont open - it just doesnt do anything. When I try to download updates or shut down computer it says it is intereupted by mail. Help
Force Quit the Mail Application
Click the Apple Logo in the top left corner of the screen
Click "Force Quit"
Select the MAIL application
Force Quit the app
After the application is quit then you should be able to restart your computer.
The Application is fully quit when the is no little glowing dot under the application icon. -
Open vi error for report generation toolkt
Originally it works fine.
Now I upgrade to win7, LV9 and office2010.
To open the old program by 8.6.1, I reinstalled LV 8.6.1 and report generation toolkit.
But still got the error as attached.
Any suggestion, thanks.
Attachments:
ss.png 184 KB1. MS Office 2010 is not yet supported, since it's still just a beta. I believe there are couple of changes that Microsoft make, and it could cause a problem.
2. LabVIEW 8.6.1, and all its toolkit is not supported on Windows 7. This could cause a problkem also.
In conclusion, you should use LabVIEW 2009, Report Generation Toolkit 2009, Windows 7, and downgrade office to XP, 2003 or 2007.
More information: http://digital.ni.com/public.nsf/allkb/C9408B9F08D711E786256F3300701D01 -
Interestingly, after a very positive experience by adding the open DNS numbers 208.67.222.222 and 208.67.220.220, I found today that every time I tried to open Safari it knocked me offline. So I've now resorted back to the number originally assigned to me.
What's going on with Safari?Jake,
One Verizon DSL account; one Westell 6100 modem
Check with Verizon and find out what the max download / upload speeds should be.
If this is the plan you purchased: http://www22.verizon.com/residential/highspeedinternet/
*"And we’re constantly looking for ways to make our DSL faster—recently upgrading our Starter plan to 1 Mbps* download and our Turbo plan to 7.1 Mbps."*
1 Mbps download / 7.1 Mbps is hardly high speed.
You can check your upload/download speeds here. http://www.speedtest.net/
To realize faster download and uploads speeds you would need to upgrade your service.
This is more then just a DNS issue. -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Itunes wont open and shows error report.
this is what i get when i open it. it was working fine last night. i opened it and it said updating library, but then i played music without a problem. this morning i uninstalled quicktime cause i never use it. so i think that might have messed it up. so i uninstalled everything and reinstalled itunes 7.2 and now i get this.
http://img118.imageshack.us/my.php?image=untitledra4.jpgiTunes uses QuickTime for audio and video playback. So it's best not to uninstall it if you want to use iTunes.
When that message you're getting cites that "Offset: 10004000", almost invariably it's caused by a broken QuickTime. So let's try swapping that out again, this time applying some additional explicit precautions.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now? -
Apple Mini DVI to Video Adapter is not working. Please Help...
I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...
Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko -
Connecting Audiovox TV (FPE3205) using Apple Mini-DVI to Video Adapter
I can't figure out what I'm missing here. All the connections look right, but... well, it's possible that I just don't know what I'm supposed to do now. I restarted both devices, but still, nothing. Any ideas?
You've posted in the iMac G3 CRT area. Are you asking this question about an iMac?
David
Maybe you are looking for
-
Exception in thread "main" trouble
I'm using NetBeans IDE 3.5.1 and every single program I've tried to write always comes out with, "java.lang.NoClassDefFoundError: (file name) Exception in thread "main" when I try to execute it. Here's a sample program; // Tests to see whether a floa
-
How to Avoid Errors in Max Function When Data Contains Blank Cells
I have a column with duration values. However, it also contains some blank cells. These "blank cells" have formulas in them, but as the cells they reference too are blank the formula doesn't produce a result.>/p> I want to get the max value from this
-
I cant get my headphones to work in the headphone port. i know they work because they work fine on
i cannot get my headphones to work while they are plugged into my laptop. i know the headphones work fine because they play through my ipod. and information would be grand. thanks
-
I wanted to log a bug somehow but couldn't find an official way to do it. I have a basic 10.5 installation modified only with the video codec pack Perian. Steps to reproduce: 1) Attach a MiniDVI - DVI connector to an external source (plasma TV here)
-
Trying to find out why ican't purchase any free apps keep getting told my billing has been refused
Just tried froglet a free append was told my billing purchased had been refused and tousea different method of payment