CR 2008 Add-Ins - doesn't go back to preview mode afterwards

I created a Add-In with no problems and it all works well. But when I run my add-in, Crystal Reports switches to design mode and stays there. But when I run the Add-In that is in the downloadable sample, it also goes into design mode but then automatically switches back to preview mode so that I can see the effects on my report. I looked through the code but don't see anything that would be the cause for why it goes into preview mode.
How do I get my add-in to go back into preview mode after it runs?
Thanks.

Briefly tested -
I think it's the report state after the ReportClientDocument.Save() rather than any configurations in the Designer or settings in the report.
The record selection formula is updated, but not the report view on Save.
If I add lines to export the report (to force a report refresh) before the ReportClientDocument.Save(), then it comes back up in Preview.
Filter filter = new FilterClass();
filter.FreeEditingText = "{Employee.Employee ID} > 12";
reportClientDocument.DataDefController.RecordFilterController.Modify(filter);
reportDocument.ExportToDisk(ExportFormatType.PortableDocFormat, "C:\\testcraddin.pdf");
Sincerely,
Ted Ueda

Similar Messages

Going back in Finder Windows doesn't go back to previews folder

Hi,
I'm hoping someone can help me. Ok, say I'm clicking a folder. I double click on a folder and when I want to go back and look for another folder, I hit the back button and rather than it return back to the folder I just double clicked, the finder window resets to the top. I then have to scroll all the way down to continue where I left off. Is there a solution for this using icon view. This is driving me nuts!!
Please helppppppppppppppp!!!!!!!!!!!!!
Thanks in advance.

Use cmd-up arrow instead.

Cant get back from disk mode (ipod classic)

my ipod is in disk mode but doesn't come back to normal mode. Itunes doesnt download the software. what can i do?

B-Rock, Sorry, I've finish my weekly backlog clearing, hope you dont mind me joining in.
Hinnakb, we are having trouble understanding your problem, from your Response
Start what download?
Install what and where?
What notification?
What problem occured?
hinnakb
. When I connect it to itunes i have to start a download, but its not possible to install it, then there comes a notification, that a problem occured.
By Disk Mode, do you mean getting this symbol?

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

dougiedc wrote:
It boggles the mind. The Verizon store on L Street downtown Washington, D.C. cannot access my Verizon account. They can only sell cellphones then it's up to me to contact Verizon on my own to get the hook up. I even asked "Are you Verizon employes? Is this a vendor store or is it really a Verizon owned and operated store?" The answer "Yes, we are Verizon employes, yes this is a Verizon owned and operated store" ...
Yes, it indeed boggles the mind. I'm of course referring to the fact that your post concerns Verizon Wireless products and services. This forum is dedicated exclusively to Verizon Communications services. As you probably know, Verizon Wireless and Verizon Communications operate as separate companies.
If you need help for a Verizon wireless product or service, it's best to direct questions to the Verizon Wireless forums. You can reach them by clicking on "Wireless" (either here or at the top of the page).
Good luck and I sincerely hope you get your issue resolved.

Add Ins Menu in PowerPoint 2008

Can somebody tell me how can I include an add ins in powerpoint 2008?

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office. Please post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Add-ins that are being set to Inactive

This pertains to Outlook 2013 in this particular case, but may apply to other 2013 products.
It's not just one add-in, but we have seen a few add-ins that go from a happy, Active add-in to a sad, unused Inactive add-in.
If I have a user who's add-in is getting disabled and they get prompted in their client with the "Add-in problem: A problem was detected with an add-in and it has been disabled. [View disabled add-ins...]" the solution is simple enough,
view those add-ins and if the one you are having trouble with is there, click the option to "Always enable this add-in"
The trouble I'm having is that not every user gets that prompt for some reason. And we're seeing a few users who are losing their room finder because the Microsoft Exchange Add-in is being disabled.
So.. if I have a "good" user who gets the warning, it's a matter of enabling their add-in and restarting the client, when it disables it again they get the prompt and we just tell it not to disable. The "bad" users however we enable
and restart and they never see the warning/option to always enable. We can enable the add-in again, but for these select few, it keeps disabling them without saying a word.
I guess my 2 big questions are:
1- Why doesn't that option show up for everybody? I'd like to be able to tell our support teams here to cue in on that prompt after enabling, but when it isn't there consistently it is not an effective solution.
2 - Where or how could I manually have that on the list of add-ins we never disable? I have found a few mentions of the registry settings, but nothing I see in my registry leads me to believe it will be a simple "find the Microsoft Exchange Add-in"
setting and change the value X to Y and you are done.
I'd like to figure out where to point the user / support to toggle it on their own and I have seen mention of a button under File - that lets you see disabled add-ins, but I don't see that in my client (Outlook 2013 and I'm on the latest) and while a registry
fix might work, it's not very end user driven or ideal.. but I'd take that over nothing.

Hi,
I'm not sure why the option doesn't show up for everybody, however, if you want to specify which add-ins are always enabled, we can use the Outlook Group Policy template (Outlk15.admx) to set the Group Policy option:
List of managed add-ins.
The policy is under:
User Configuration\Administrative Templates\Microsoft Outlook 2013\Miscellaneous
You will need to find the programmatic identifier (ProgID) for COM add-ins. To obtain the ProgID for an add-in, use Registry Editor on the client computer where the add-in is installed to locate key names under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins
or HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\Outlook\Addins.
For more information, please refer:
Plan feature customizations in Outlook 2013
http://technet.microsoft.com/en-us/library/ff631135.aspx
Use Group Policy to enforce Office 2010 settings
http://technet.microsoft.com/en-us/library/cc179081(v=office.14).aspx
Note: This link is for Office 2010, but it also applies to Office 2013.
Hope this helps.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Acrobat XI PDF Add-ins do not appear in Office 2013

I just installed Acrobat XI on a computer with Win7 and Office 2013. The program works fine but I have been unable to get the add-ins to appear in the apps. I had previously done the same installation on another computer of mine and all works fine. I have spent at least 10 hours trying everything I could find online and in the forums with no success.
I have unistalled and reinstalled Acrobat. I have done a total repair on Office. The results are always the same.
In Outlook, the pdf maker is shown as disabled. I click to enable it and then restart. It still does not appear and the pdf add-in is again shown as disabled. I removed the add in and then manually added it back. Same results.
In other apps (e.g. Word), the pdf maker is shown as enabled but it does not appear on the toolbar. Again, on these apps, I've tried unchecking and checking (restarting in between) with no luck. And have also deleted the add in and then manually put it back in. No success.
I also repeated all of the above by starting applications as adminstrator thinking that would make a difference. No success.
I've tried using the registry editor regsrv32 to install the .dll file but I only get errors.
I suppose there could be some registry entries that need to be deleted, but I don't have a clue which ones or where to look.
I can't find anything else to try! Any suggestions will be helpful!

I suspect you have AA 11.0.0. Update the product. OFFICE 2013 came out after AA XI and you need an update for opertion. I understand that AA XI has beeen updated to work with OFFICE 2013. In the meantime, just print to the Adobe PDF printer.

How to delete ADD-INS listing in the "Tools menu

Hi
I deleted a couple of "ADD-Ins" I didn't need anymore "CalcTax" and "cTax"
stored in this directory: "C:\Users\John\AppData\Roaming\Microsoft\AddIns"
The mistake I made is that they where active and now I can't delete the two menu listed in the "Tools Menu".
I tried to redo the Add-Ins but it doesn't work.
I ran the "Remove Control macro" below but no success.
I checked the Registry for the two Add-Ins but found nothing.
Below is one of the two Add-Ins macro but not the original one. I deleted them.
and "No Backup"
Does anyone know how I can remove the two entries in the "Tools menu.
Option Explicit
Const cTag = "CalcTax "
Sub Auto_Open()
    RemoveControl
    With Application.CommandBars("Worksheet Menu Bar").Controls("Tools").Controls.Add
        .Caption = "CalcTax"
        .Tag = cTag
        .OnAction = ThisWorkbook.Name & "!CalcTax"
End With
End Sub
Sub Auto_Close()
    RemoveControl
End Sub
Private Sub RemoveControl()
On Error Resume Next
Application.CommandBars.FindControl(Tag:=cTag).Delete
End Sub
Sub start()
UserForm1.Show 0
End Sub
Cimjet

Re: Menubars/menus xl2003 and earlier
To remove any item from the menus...
Right-click in the menubar area and choose Customize (a dialog box is displayed).
Drag the unwanted menu item off of the menu and drop it over the worksheet.
Close the dialog box.
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

Hyperion add-ins in Excel

hi,
after added the hyperion add-ins (for installing smartview), my user has difficulting working on her normal excel file which is 10mb size. she is not connect to the application but when she click on the worskheets on her excel file, it takes several minutes to show the sheet. the IT guys said its the adding of hyperion add-ins that is causing this problem. if the add-ins disabled, she can work on her file normally. Does anyone know if add-ins is really causing such issues for users? other than disable the add-ins when not using smartview, is there better alternatives? appreciate any advices, thanks!

Here is some important information on how to reduce file size. From Ozgrid website.
Unusual Excel File Size Increase
Unfortunately it is not too uncommon to have an Excel Workbook increase in file size for no apparent reason. Below are some methods to overcome this problem, that should be performed in the order stated! Please note OzGrid accepts no responsibility for any loss of data. This means save a copy of your Workbook first. After each step Save and check the File size by going to File>Properties/General If it has reduced the file size you shouldn't need to go any further!
Avoid saving as multiple versions. Save as "Microsoft Excel Workbook (*.xls). You can make this the default by going to Tools>Options/Transition and selecting Microsoft Excel Workbook from the Save Excel files as Combobox. This alone can reduce file size by 50%
Do the following to ALL Worksheets. Select any single cell then push F5, click Special and check the "Blanks" option and click Ok. Now go to Edit>Clear>All. Manually go to the last used row in the Worksheet (do not use Edit>Go to-Special "Last Cell"). Select the entire row beneath, then holding down the Ctrl+Shift key push the Down Arrow. This should select all unused rows. Now go to Edit>Clear>All. Do the same for the Columns. Now Save.
Right click on any sheet name tab and select "Select all sheets". Now right click again and select "Move or copy" Check the Create a copy option then choose "(New Book)" and click Ok. Save this new Workbook as any name and check it's file size via File>Properties/General.
If no dramatic difference delete one sheet at a time and Save, each time check it's file size via File>Properties/General and see if there has been a disproportional reduction in file size.
If there has, the Worksheet may have been corrupt, go back the the original Workbook and copy the entire contents of the possibly corrupt Worksheet. Come back to the new Workbook, insert a new Worksheet and paste the data onto it. If this does not help you may need to delete a few rows at the time (Saving each time) until you find the offending row(s).
If you have Modules and/or UserForms in the Workbook, open the VBE (Alt+F11) and right click on each in the "Project Explorer" (Ctrl+R) and Export. Now, in a new Workbook again open the VBE and go to File>Import File.. and import all Modules and UserForms into this Workbook. Use the Move or copy method (as shown in step above) to copy all sheets into this Workbook Save.
Phantom Links
See Find Excel Links to help find & repair Excel links.
Another quite common problem with Excel is that at times your Workbook may be asking you to update links when you do not have any. Of course the very first thing to check is that there are not any links you do not know about, which steps 1 and 2 will do.
1.Unhide any hidden Worksheets first. Then right click on any sheet name tab and select "Select all sheets". Now go to Edit>Find and in the Find What: box type: [*] also select Formulas from the Look in: box and click Find Next. This will find any formulae referring to another Workbook.
2.Go to Insert>Name>Define and scroll through the list to ensure no named ranges are referring to another Workbook.
3.Go to each sheet and ensure you have no linked Pictures, Charts or Controls.
4.Go to Edit>Links and select the file name under Source file, now click Change Source... In the "Change Links" dialog locate the Active workbook, ie the one you are in now, select it and click Ok. This will force the Link to refer back to itself. If you get an error go to step 5!
5.Open a new Workbook, save it as any name. Create a real link to it from you problem Workbook. Now go to Edit>Links and select the file name (not the newly created file!) under Source file, again click the Change Source... button but this time select the newly created Workbook from the "Change Links" dialog and click Ok. Now Save the Workbook and delete the real link you created and save
Last but not least go here: http://support.microsoft.com/default.aspx?scid=kb;EN-US;q188449 and download the: Download Dellinks.exe now

Add-ins Crystal Report

Hi,
I'm new to Add-ins creation in Crystal Report so to kick off it would like to know few things
1. Can i able to read/control over the data which is displayed on the Report?
2. If there is any help available please pass it which basically explains steps that are involved to create a plug-in and deploy.
Thanks

1. Can i able to read/control over the data which is displayed on the Report?
Not sure why you'd need and add-in for this? You can use selection formulas to control the data.
2. If there is any help available please pass it which basically explains steps that are involved to create a plug-in and deploy.
Places to start:
[Crystal Reports .NET SDK Samples|http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples]
(Search for "Add-in" on the above page)
[Extending Crystal Reports 2008 Custom Add-ins|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d00e296b-59f3-2b10-b187-b453dd601f93&overridelayout=true]
Also see [this|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Ludek

My iphone calendar stopped syncing with outlook 7 thru the cloud. I clicked on tools, trust center, add ins. icloud add in had been disabled. I tried to re enable it but was told that this could only be done by administrator. I am the admin. Help????

My iphone calendar stopped syncing with outlook 7 thru the cloud. I clicked on outlook tools, trust center, add ins. I noted that icloud add in had been disabled. I tried to re enable it but got a message that this change could only be done by administrator. I am the administrator. Help???? Any ideas?

I do not believe this. I have been going nuts trying everything as in prior posts, and this has been a problem for users at least since 2010. I had this problem a long time ago and didn't pay too much attention to it because it was my iPad, and I depended on my BB a a base calander to feed Outlook. I became very concerned within the past week when I switched my BB to iPhone 5s, and was carrying both because I still needed to carry the BB for new calander enteries to sync up to Outlook 2007.
I had followed http://support.apple.com/kb/HT1925 and delete the apple s/w and re-installed. But according to the previous post, it appears that the issue was in the data - which was not deleted during all these deinstalls nor overridden with the new installs.
I am a XP user, so my files are in documents and settings/(username) both application data and \local settings\application data, but I also have safari and quicktime installed as well and didn't want to just blow entire high level folders if I didn't have to.
So I followed http://support.apple.com/kb/HT1925 then purged several apple folders in my windows profile and this definitely blew apple computer\preferences away. What I did was a little clumbsy, and desperate, but it worked. I am finally back in business.
However, I would like to see someone fine tune this and determine if it was just the preferences folder that needed to be deleted so that iTunes needed to rebuild it, or if there were other filoes that were apparently corrupted away, just to get this to the minimum number of steps to fix the issue.
BUT THANKS - This has been the most HELPFUL thread to get me syncing agai!!!!

Window Vista Outlook Calendar Sync Add-ins disabled tips

If using Windows Vista and having trouble syncing calendar, follow Apple's instructions for disabling add-ins.... BUT ..... run Outlook as an Administrator. If you can't remove some of the add-ins running as an Admin will solve your problem.

Try this. Forgive me as I am not at my work computer but expericenced exactly the same problems.
Go to edit your email account and assuming you are using outlook 2003 since I don't 2007 you will need to find the dialog box that says something to the effect of send your information to your personal documents. It is a drop down menu within settings. You will then need to close outlook and open it again. Try syncing your iphone and this worked like a charm for me.
To sum it up your mail,contacts, and calendar entries are curetnly being stored on your work server. Iphone doesn't like that. When you tell outlook to store these items on your personal documents they then are stored on your hard drive and Iphone loves that. When I first tried doing this I noticed that I didn't have the option to send these items to my persnal files so if that is the case for you you will need to create it by clicking add and just pointing to personal files.
I hope this helps.

Can one 3rd Party add-in hide tabs added by other 3rd Party add-ins?

I have a C++/COM add-in that produces a Ribbon with a subset of the standard Word controls. I would like this ribbon to contain only the controls I have placed there, i.e. not to contain tabs inserted by other 3rd party add-ins (e.g. Adobe PDFMaker).
I can see how the user can remove these tabs using the Customize Ribbon functionality, but can't find a programmatic way to exclude the tabs from my own ribbon (modifying the XML to include <ribbon startFromScratch="true"> seems to affect only
the built-in tabs). To be clear, I do not want to disable the other add-ins, only to exclude their tabs and menu items from my custom Ribbon. Can this be done?

Hello,
No. The Fluent UI (Ribbon UI) extensibility model doesn't provide anything for that. But you can try to unload other add-ins at runtime setting the
Connect property of other third-party add-ins to false. The Connect property returns True if
the add-in is active; it returns False if the add-in is inactive. An active add-in is registered and connected; an inactive add-in is registered but not currently connected.
Or set an appropriate key in the windows registry to prevent other add-ins from loading, see
Registry Entries for Application-Level Add-Ins for more information.
You can read more about the Ribbon in the following series of articles in MSDN:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

I need to replace firefox 4.0.1 with firefox 3.6 because my add ins don't work with 4.0

Question
i need to replace firefox 4.0.1 with firefox 3.6 because my add ins don't work with 4.0 but will work with 3.6. How do I accomplish this?

Any particular add-on? Maybe there's an updated version or substitute?
If you can't find a solution with Firefox 4, here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 4.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

Icloud outlook, inactive application add-ins?

In Outlook 2013, Microsoft Office Add-Ins, I keep having problems with icloud outlook switching back to an inactive application. I keep having to go back in and switch it back to an active add-in. I hadn't had this problem until 3 weeks ago. I'm not sure what was changed. Is there a fix to this problem?

go to
control panel
internet connections
click on icloud
check boxes wanted to update and go

CR 2008 Add-Ins - doesn't go back to preview mode afterwards

Similar Messages

Maybe you are looking for