Create a Locals variable that remains after run completed (LabVIEW)

I am trying to create a Locals variable that remains after a sequence run is completed. When I use the PropertyObject to create a Locals variable, its scope is available only when the sequence is running.
Respectfully,
Robert

The locals you see at runtime are a copy of the default locals in the file. Each instance of a running sequence needs its own copy of the locals because their values can vary in different running instances of the same sequence.
The edit time definition of the sequence local variables has a property path such as:
RunState.SequenceFile.Data.Seq["MainSequence"].Locals
If you modify these locals and you want the file to be marked as modified so that the user is prompted to save, then you should also call:
RunState.SequenceFile.AsPropertyObjectFile().IncChangeCount()
Note that changing the edit time locals only affects new executions. You might need to modify both the edit time and runtime locals depending on what you are trying to accomplish.

Similar Messages

How can you create a local variable from a boolean control?

I want to create a local variable from a boolean control, but it says that boolean latch actions are incompatible with local variables, but I need a way to check this boolean control in two differents loops, how can I do it?

"Graci" schrieb im Newsbeitrag
news:[email protected]..
> I want to create a local variable from a boolean control, but it says
> that boolean latch actions are incompatible with local variables, but
> I need a way to check this boolean control in two differents loops,
> how can I do it?
Use global variables.
Compare them with a constant Boolean like F or T.
The result is true or false and then you can use it in a Cae-Loop.
Martin

How to create a local variable in bpel?

Hi,
In my bpel flow I need to call service based upon a pl/sql procedure multiple times. The procedure returns the results of a query in chunks and contains a boolean as an output parameter that tells me whether there are any more records that need to be fetched based upon which I will be calling the service again. I want to achieve this using a while loop. So for the while loop condition I am thinking of creating a local variable in the bpel process and assign it an initial value of false(). Then once the service is called I will set the value of this variable to the output boolean parameter returned by the procedure. So while the boolean is true the service will be called again.
My question is how can I create a local variable in bpel and assign it an initial value of false. Or is there any other way that this can be achieved?
Thanks!!

Hello! thanks for yr response.
I tried creating a new variable by defining a scope. But in the create variable window I cannot define a standalone variable of boolean type I need to pick up the type from an lov that brings up a list of all existing variable! so basically u are just mapping to an existing variable which in my case will not work because I will need to map to one of the elements of the output of the pl/sql procedure based service -- also this element itself is not exposed in the lov only the name "inputParameters" is displayed as the element --all the contents are not exposed.
Any suggestions?
Thanks!

Photoshop CS6 cannot open or create new file. This happened after running CCleaner

Photoshop CS6 cannot open or create new file. This happened after running CCleaner

Hi, I've been asked to join this discussion. CCleaner is a nice tool, but if you used the Registry Cleaner that came with it, it might have done something to Photoshop's registry entries. There is that danger in using them.
One thing CCleaner does is leave a backup of the registry, or you can use Windows System Restore to go to that point before you ran the Cleaner. Let's go with System Restore. Review the instructions.
System Restore - Microsoft Windows
If you suspect a virus, I'd like to direct you here http://bleepingcomputer.com/
That would be the "Am I infected?" forum.
They have the tools, you run them, and copy and paste the logs that are generated. They are very good at this, but it is super important you follow directions and don't leave until the process is completed.
Gene

Is there an easier way to create a local variable?

I want to create a local variable, but I don't wont to have to find the terminal first and then use the option create-local variable. Is there a way to make a copy of an existing local variable? If I use the CTRL-C and CTRL-V option another terminal is created too.

> Great! That was exactly what I wanted. It even works if more than one
> variable is selected.
This may not apply in your situation, but I feel obliged to make this
warning anytime I see this sort of posting. If you find yourself making
too many local variables, it is worth checking to see if you are doing
things the best way.
If you are using the locals for communication between parallel loops or
for UI -- writing to controls, then keep trucking. That is why they
were added. If you are using them as storage locations, like variables
in BASIC or C, or to avoid wires, then you should definitely read the
devzone article about race conditions and the usage of globals/locals.
If not, you will probably find yourself with some monument
al debugging
sessions later on.
If you have questions, fire away.
Greg McKaskle

I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
If that solution is not flexible enough, consider using the very affordable (12$) Elements+ add-on which offers a 'meta stamp' script :
http://elementsplus.net/v5/en/meta-stamp.htm
Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview...

How I Creat a Local Variable to Boolean Key If I but this Boolean Key in Cluster in Fron Panel

I build a cluster on Fron Panel and I put in it Boolean Key (Square LED) .
I want to creat a local variable to this object , how can i creat it.
the option which I get are
Property Node
Reference
Invoke Node

Hi,
You create a local variable of the cluster first. Then you can access any of the items in the cluster using Unbundle/Bundle or Unbundle by Name/ Bundle by Name tools.
Hope this helps
Ray Farmer
Regards
Ray Farmer

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation". Anyone know how to fix this?

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation".
Anyone know how to fix this?
Please help. I can't get it to work. I've tried uninstalling and it says the same thing. Is there anyway anyone can help me?

HELP!!!! PLEASE!!!!!

Creating class wide variable that gets re-initialized every time

I declared a class-wide variable in my jsp document using the <%! %> tags:
<%! boolean HasMoreRows = true %>
I set this variable to false in one of the private jsp methods (also declared within <%! %> tags) when the program is supposed to terminate (there are no more rows left in my database result set).
When I run the jsp document the first time after modifying it, it works fine. But if I hit the browser "back" button and then hit the "submit" button on the jsp page again to recreate the database result set, the HasMoreRows variable has the same value it had after the report ran the first time (that is, it is set to false).
I think this has something to do with the way a servlet is created and re-used by the servlet container. I have to set the variable in a method so I cannot use a local variable (i.e. a variable declared inside <% %> tags). Does anyone know how to declare a variable that can be used anywhere inside the jsp document (including all methods) but gets reset to its initialization value every time the jsp document is run? Thanks.

I think I figured out the solution. It is to declare the variable in the <%! %> tags but initialize it in the <% %> tags.
<%! boolean HasMoreRows; %>
<% HasMoreRows = true; %>

How do you create a local zone that's not "stripped down"?

Hi all,
I've been exploring Solaris 11 Express a bit more after work, and I can't figure out how to create a new local zone that doesn't have a minimized package set. The ISV guide mentions that new local zones default to "minimal system software":
http://www.oracle.com/technetwork/articles/systems-hardware-architecture/o10-015-s11-isv-adoption-198348.pdf (page 6)
...but that I can specify additional packages with the "-e" flag during the zone install. I don't want to list dozens of supplemental packages by hand... there must be a way to make a new local zone that has an almost identical package loadout as a standard global zone. (i.e. ftp, smtp, telnet services exist in the global zone, but are not installed in a local zone).
Do I need to use ips commands to first make an image (of a global zone) then update my local zones to that image?
Thanks!
Mike

Thanks Russell, this sounds exactly like what I was looking for! I'm "zoneadm install"'ing a new zone right now to kick the tires. One note for everyone else:
pkg install -r slim_installI got an error that "-r" isn't a valid flag for pkg, but it seems to be working without it (i.e. "pkg install slim_install")
Regards,
[email protected]

HP4275A can not pass self test after running the labview program

I am using Labview to control HP4275A LCR meter. The Labview program is just the instrument driver for the HP4275A, and it works great. Before running the program, the instrument can pass both Open and Short test perfectly. But after running the program, it can not pass self test, neither Open nor Short. I don't know why?? Is it relative to my Labview program??
Thanks

Thank you so much for your help. Yes, the instrument is in Local after running the instrument driver. In normal Open self test, just choose Capactiance as the Display A, and leave the four output terminals open then press the Self Test button. The Open self test will start and "OP" will be shown in the DIsplay A window, after 2 seconds, the open test will be finished. If something abnormal, the number of the abnormal step is displayed in Display A. Similar with the Short test.
The problem I had was: before running the instrument driver, the self tests pass; but after running the instrument driver, the Open and Short test show abnormal, Open test is abnormal at step 17, and Short test is abnormal at step 24.
And the instrument driver is only write commands into the instrument and then read back measuring values from it. Nothing else. So I am not sure if the problem is my instrument driver.
The weird thing is the problems happened several times and then if I do the Open and Short self test again after running the instrument driver, both pass. I am not sure whether the problem will come back or not.
Ia there any help??
Big thanks

Variable not defined after running for() loop.

Hi,
I have a little problem, I have created a for loop, which seems to work, except that a variable within the for() loop gets lost, because if I try to call the variable after the loop, it says it's not there. anyway, here is my code, followed by the error. Thanks!
<%
Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:testdb");
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
String sql_count = "SELECT COUNT(*) FROM users";
ResultSet cn = stmt.executeQuery(sql_count);
cn.first();
int row_count = cn.getInt(1);
int num = (int)(Math.random() * (row_count));
int inum;
for (inum=0; inum<row_count; inum++)
int jnum = inum + num;
if (jnum >= row_count) { jnum = 1; }
String sql = "SELECT * FROM users WHERE ID = "+jnum+"";
ResultSet rs = stmt.executeQuery(sql);
int ce = rs.getInt("cr_earned");
int cu = rs.getInt("cr_used");
if ((ce-cu) > 0) { inum = row_count + 1; }
String sql = "SELECT * FROM users WHERE ID = "+jnum+"";
ResultSet rs = stmt.executeQuery(sql);
rs.first();
String url = rs.getString("url");
con.close();
%>
***********************ERROR***********************
Generated servlet error:
C:\tomcat\jakarta-tomcat-4.0\work\localhost\examples\gtt\surf$jsp.java:93: Undefined variable or class name: rs
rs.first();
^
An error occurred between lines: 17 and 43 in the jsp file: /gtt/surf.jsp
Generated servlet error:
C:\tomcat\jakarta-tomcat-4.0\work\localhost\examples\gtt\surf$jsp.java:94: Undefined variable or class name: rs
String url = rs.getString("url");
^

now i've defined them all before the loop and I get this error. Error is following modified code below.
<%
Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:testdb");
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
String sql_count = "SELECT COUNT(*) FROM users";
ResultSet cn = stmt.executeQuery(sql_count);
cn.first();
int row_count = cn.getInt(1);
int num = (int)(Math.random() * (row_count));
int inum;
int jnum;
ResultSet rs;
for (inum=0; inum<row_count; inum++)
jnum = inum + num;
if (jnum >= row_count) { jnum = 1; }
String sql = "SELECT * FROM users WHERE ID = "+jnum+"";
rs = stmt.executeQuery(sql);
int ce = rs.getInt("cr_earned");
int cu = rs.getInt("cr_used");
if ((ce-cu) > 0) { inum = row_count + 1; }
rs.first();
String url = rs.getString("url");
con.close();
%>
***********ERROR***************
An error occurred between lines: 17 and 45 in the jsp file: /gtt/surf.jsp
Generated servlet error:
C:\tomcat\jakarta-tomcat-4.0\work\localhost\examples\gtt\surf$jsp.java:95: Variable rs may not have been initialized.
rs.first();
^
Thanks anyone.... ;-)

How to erase protected files from Dustbin that remain after emptying

Hey
I find myself contronted with some rubbish in my dustbin that is so well protected that it cannot be erased.
It remains in my dustbin even after I emtyed it.
Is there a way to get rid of this rubbish and get my dutbin emty.
How can I open the protection.
I have no idae where these files came from.
Thanks for some support!
Johan Hahn
Nerherlands

Merci Paul!
Trash it! worked perfect to emty this nasty files from my dustbin.
Thanks
Johan Hahn
Utrecht, Netherlands

How to create a aspx page that expires after first use

I want to create an ".aspx" page in VB that will expire after the first use or 30 minutes
This is to add a password reset page onto our one of our apps.
Thanks

I want to create an ".aspx" page in VB that will expire after the first use or 30 minutes
This is to add a password reset page onto our one of our apps.
Thanks
Hi,
Based on your replay in another thread about sharepoint, maybe you are asking the way used in sharepoint, then I would suggest you consider posting this issue in
sharepoint forum to get supports.
If not, then you could post this issue in the forums Mr. Monkeyboy suggested.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is it possible to create a Text Variable that uses text from a structure?

The question is this -
I have created structure which consists of 4 high-level nodes. Each level one node contains a different number of level 2 nodes. Is it possible to use the text from these nodes in replacement path variables?
Example, my structure levels are:
GS
SA
OOI
COGS
If a user drills into COGS, I'd like to display the text "COGS" in the header but I have not found a way to capture it. From what I can tell, the variable editor only allows Characteristics and their text/key or user input text. I don't see an option for Structure level/node text.
Anyone know if this is even possible?
Thanks!

HI!,
I think you should separate programming for AS3 and for FLEX,
this is beacuse they both use different class packages. If you want
your classes to be FLEX compatible you need to extend them from
Flex Objects and not from AS3 Objects.
In sum, if you want your class to be processed by let's say
the application object then you need to extend it from
mx.core.UIObject.
This is because there are lots of methods that FLEX uses to
place your class on the screen that are not used by normal AS3
applications.

Create a Locals variable that remains after run completed (LabVIEW)

Similar Messages

Maybe you are looking for