Create a new view under a component in IC Webclient UI

Hi ,
Can anyone tell how to create a new view under a component in IC Webclient UI.
Regards,
Sijo

Depends what kind of view you are talking about. In any case first go to runtime repository on the left panel of the component and then click the edit button.
If you are talking about interface view, right click the component interface and choose "Add interface view". The created view is added to the selected window in the runtime repository.
If you want to add view to the window right click the windows component and select "Add view".
Select the view using the f4 help and save the runtime repository.

Similar Messages

Creating a new view in a component

HI,
I am trying to create a new view in a BSP component using the wizard. But the context nodes are not getting created. Its throwing up an error - "View not copied with wizard; processing not possible".
What could be the problem ? Pls help.
Regards,
Aravind.

Hi Arvind,
Before posting error, please search for it.
Here is what i found here in 2007 forum itself.
I guess you have not enhanced your component and your view.
Without enhancing the component it is not possible to add a new context node.
Here is a very helpful, follow it and the the other link within this thread,
both are very useful in this regard.
Web Client Context Node Enhancement
Thanks & Regards
Shiven

Create a new view in a enhance component

Hi All,
I want to create a new view for sales order and quatation in a component BP_factsheet.When i craete new view ,it is asking about some value like model node, bol entity, higher level, bol realtion.after that is is asking context node ,bsp application ,custome controller and view type.How can i get these value .when i create a new view then have to add these view in run time repositry under a window or not?
Thanks in advance....
Vishwas

Hello Vishwas,
You might be interested in knowing how to customise the new UI to add a new view using the enhancement concept.
Please refer to the published document on the service marketplace:
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
refers to the link at
service.sap.com/okp
Inside this go to:
SAP CRM 2006s: Learning Map for Technology Consultants
wherein you can find the cookbook to perform similar operation in detail.
SAP CRM UI Cookbook
I hope this helps.

How to create a new view by copying from standard view in IC webclient?

Hello, expert,
I need to enhance a sap standard component (BP_Factsheet), inside it I need to create a new view by copying from an existing standard view (Acitivities). However when I try to make a copy, I was asked for destination BSP application, I entered the Z-Application which I used when defining enhancement for the component. After the copy, I don't see the new view.
Then I tried the destination BP_factsheet, instead of the z-application, then after the copy, I can see the new view. However since it's in SAP application, it seems like it's a MOD, not enhancemnet, and inside the new view, the classes (for context, context nodes, etc.) are not in custom namespace (not starting with Z).
So please let me know how can I make a copy of sap standar view in custom namespace.
Thanks in advance.
Jayson

When copying you can put any BSP name..normally the practice is to prefix the standard name with a Z.
Secondly when you want to make changes to the individual classes and methods you need to right click and say enhance. Then the AZ class names etc would be generated. The view should appear in the component wherein you copied the original view from.
I hope this helps.
The cookbook should have details on this. Otherwise also its quite intuitive.
Award points if it helps.
Thanks.

Not able to create the NEW DC under the Track from NWDS

Hi All,
I have imported one Track to the NWDS. Now i am trying to create the new dc under the SC component which i have imported under the track.
When entered as
vendor: abc.com
name as: test_dc
click on next giving the following error.
syntax of abc.com/test is not valid:Invalid name: appropriate prefix not found; choose another name or another name server.
Any body tell me how to resolve this error.
Regards
Vijay

Hi Vijay,
Following can be done for Name Reservation:
1. Log on to the SLD.
2. Click on Name Reservation
3. Select "Development Component" in the Name Category
4. Click on button New Name Prefix
5. Add your prefix abc.com in the NAme Prefix field and Save.
You can also look at [this.|http://help.sap.com/saphelp_nw70/helpdata/EN/43/e9905fe1582d53e10000000a422035/frameset.htm]
Regards,
Alka.

Create a new view on Reports section

I have tried to create a new view on the "Reports" section in SCSM 2012 SP1 and here is my final MP:
<ManagementPack xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" ContentReadable="true" SchemaVersion="1.1" OriginalSchemaVersion="1.1">
<Manifest>
<Identity>
<ID>SG.Report.Library</ID>
<Version>1.0.0.0</Version>
</Identity>
<Name>SG Report Library</Name>
<References>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SMReport">
<ID>Microsoft.SystemCenter.Report.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<Presentation>
<Folders>
<Folder ID="Folder.SGReporting" Accessibility="Public" ParentFolder="SMReport!ServiceManager" />
</Folders>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="SG.Report.Library">
<Name>SG Report Library</Name>
<Description />
</DisplayString>
<DisplayString ElementID="Folder.SGReporting">
<Name>SG Reports</Name>
<Description>Contains SG reports</Description>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks>
<Resources>
</Resources>
</ManagementPack>
I can see the MP is imported successfully, Then I query the DB for folder:
select * from Folder
where folderName like '%report%'
which gives me some rows containing the folder with parentID = '77C85F13-0D2F-5989-F175-781DE54AD627'
this GUID belongs to "ServiceManager" folder which is the parent folder of "reports" section.
All goes well without error, yet the folder does not show up!
I have tried sealing the Mp but still to no avail.
What I have done wrong?
YSobhdel

you have to use the MM01 tocde and enter the mateial you want extend for new view. system will propose the view and select the new view.
Or use MM50 for mass

Creating a new view to search local database

SA
i need to create a new view that searches my local db for certain clumns
and i need the filter to have drop down lists based on my instace variables objects
any suggesstions please ?

You cannot implement that functionality using the Workspace views. I suggest having a screenflow that uses a JSP to display the information in the way you want. This screenflow can be exposed as a global activity.

Create a new view in Material Master

Hi All,
I need to create a new view in the Material Master (Tcode - MM*)
Can anyone let me know how can this be attained. Can this be attained by configuration.
Regards
Simin.R

you have to use the MM01 tocde and enter the mateial you want extend for new view. system will propose the view and select the new view.
Or use MM50 for mass

Unable to create a new view for SAP UI5 in NWDS

Hi UI5 Profis,
I'm just getting started with SAP UI5 and wanted to create and run my first application using the UI5 Tools wirh NWDS. After having installed NWDS and the UI5 Tools
I create new SAP ui5 project, but the wizard always run into error, when I want to create new view.
Did someone already have the same issue?
Thanks in advance,
BR,
Berenger

Hi Berenger,
Which is your NWDS version?
It seems there is a bug on view creation with 1.8.8 version:
1814417 - Patched version 1.8.8 of UI Development Toolkit for HTML5
http://service.sap.com/sap/support/notes/1814417
Kind regards

ALV: Create a new view in Settings

I get an exception "Dynamic type conflict when assigning references " when trying to create new view in Settings of ALV.
The ABAP call stack was:
Method: MAP_FROM_MODEL_CELL_EDITOR of program CL_SALV_WD_PERSISTENCE========CP
Method: MAP_FROM_MODEL_COLUMN_SETTINGS of program CL_SALV_WD_PERSISTENCE========CP
Method: MAP_FROM_MODEL of program CL_SALV_WD_PERSISTENCE========CP
Method: IF_SALV_WD_COMP_TABLE_PERS~SAVE_AS of program CL_SALV_WD_C_TABLE============CP
Method: ON_VIEW_SAVE_AS of program CL_SALV_WD_C_TABLE_V_SERVICE==CP
Method: IF_SALV_WD_VIEW~ON_HANDLE_EVENT of program CL_SALV_WD_C_TABLE_V_SERVICE==CP
Method: IF_SALV_WD_COMPONENT~VIEW_ON_HANDLE_EVENT of program CL_SALV_WD_A_COMPONENT========CP
Method: ON_VIEW_SAVE_AS of program /1BCWDY/2S9J7MRTEX4AZT4W9F24==CP
Method: ON_VIEW_SAVE_AS of program /1BCWDY/2S9J7MRTEX4AZT4W9F24==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/2S9J7MRTEX4AZT4W9F24==CP
After some research it turned out that there is a problem with toggle button which is set as editor for one of columns.
Debugging showed that data persistance logic of ALV (method MAP_FROM_MODEL_CELL_EDITOR, class CL_SALV_WD_PERSISTENCE, package SALV_WD_COMMON) expects that class CL_SALV_WD_UIE_A_TOGGLE_BUTTON like simple button is derived from class CL_SALV_WD_UIE_A_CAPTION, but it's not.
The same error can be reproduced on sample SALV_WD_DEMO_TABLE_EVENTS.
Do I have a problem with different versions of packages (SALV_WD_COMMON and SALV_WD_CONFIG)? Or something else?

you have to use the MM01 tocde and enter the mateial you want extend for new view. system will propose the view and select the new view.
Or use MM50 for mass

Create a new bookmark under an existing bookmark in the tree

I have a script to search through a time sheet report for the pages without the string "Employee Signature" and to then create new bookmarks under the existing bookmarks in the tree.
So far the script will execute the book marks for the pages in the time sheet report without the string "Employee Signature".
At the last bookmark executed it will insert a new child bookmark before the following console error appears.
this.bookmarkRoot.children[(m + 1)] is undefined
19:Console:Exec
TypeError: this.bookmarkRoot.children[(m + 1)] is undefined
19:Console:Exec
of 128
If someone can please advise where the script is going wrong it will be very much appreciated. The script is as follows:
var ckWords; // word pair to test
var bFound = false; // logical status of found words
// loop through pages
for (var m = 0; m < this.numPages; m++ ) {
   bFound = false; // set found flag to false
   numWords = this.getPageNumWords(m); // number of words on page
   // loop through the words on page
   for (var j = 0; j < numWords-1; j++) {
      // get word pair to test
      ckWords = this.getPageNthWord(m, j) + ' ' + this.getPageNthWord(m, j + 1); // test words
      // check to see if word pair is 'Employee Signature' string is present
      if ( ckWords == "Employee Signature") {
         bFound = true; // indicate found logical value
         break; // no need to further test for this page
      } // end Employee Signature
   } // end word loop
   // test to see if words not found
   if(bFound == false) {
        var nLastSub = this.bookmarkRoot.children[(m+1)].children.length-1;
        this.bookmarkRoot.children[m+1].children[nLastSub].execute();
this.bookmarkRoot.children[m+1].children[nLastSub].createChild("Employee Signature Reqd", "this.pageNum = " + (m+1));
    } // end not found on page
} // end page loop
Thank you

I need to place a new bookmark underneath the existing bookmarks for the pages that do not contain the words "employee signature".
I am not sure how to refer to the existing bookmark on those pages.
Tried to revise the script, and now all of the new bookmarks are created underneath all of the existing bookmarks for every page in a continuous loop.
I need a new single bookmark underneath the exisiting bookmarks on the pages that do not contain the words "employee signature".
Can you please help?
var ckWords; // word pair to test
var bFound = false; // logical status of found words
// loop through pages
for (var m = 0; m < this.numPages; m++ ) {
   bFound = false; // set found flag to false
   numWords = this.getPageNumWords(m); // number of words on page
   // loop through the words on page
   for (var j = 0; j < numWords-1; j++) {
      // get word pair to test
      ckWords = this.getPageNthWord(m, j) + ' ' + this.getPageNthWord(m, j + 1); // test words
      // check to see if word pair is 'Employee Signature' string is present
      if ( ckWords == "Employee Signature") {
         bFound = true; // indicate found logical value
         break; // no need to further test for this page
      } // end Employee Signature
   } // end word loop
   // test to see if words not found
   if(bFound == false) {
for (var i=0; i < this.bookmarkRoot.children.length; i++)
        var nLastSub = this.bookmarkRoot.children[i].children.length-1;
        this.bookmarkRoot.children[i].children[nLastSub].execute();
this.bookmarkRoot.children[i].children[nLastSub].createChild("Next Page", "this.pageNum = " + (m+1));
    } // end not found on page
} // end page loop

Is there a way to create a new section under "Library"?

iTunes lists several sections/divisions under the heading "Library" (Music, Movies, Books, Apps, etc), but I have a lot of audio (and a few video) recordings of speeches that I would like to put in a division of their own, preferably called "Talks". Is there a way of creating such a section/division? Better still is there any hope that iTunes would ever come with such a division? I can't believe that I'm the only one who collects interesting talks.
(Just to be sure that I'm being clear, I am NOT asking how to use an "alternate iTunes Library". I want a new section within the exisiting Library. BTW, I know how to use playlists, but I don't want talks mixed in with Music or audiobooks.)

Thanks turingtest2 for pointing out iTunes Feedback. I'm new here and I have not learned the ropes.
I've been pokin' around in Podcasts and iTunes U. It seems like those are good possibilities. Thanks again.
One thing I notice is that both sections sort on Newest vs Oldest which makes sense for such things. But I'd rather sort on titles. Ah, well, ya can't have everything. (Can you?)
Your smartsource sounds interesting. Good luck.

In Address Book, how do you create a new group under "On my Mac", not under "iCloud"?

In Address Book there are groups under "On my Mac" and groups under "iCloud". When I do File -> "Create new group", the new group always goes under "iCloud". How can I make a new group to go under "On my Mac". I also tried dragging the new group from the iCloud area to the "On my Mac" area, but that doesn't do it. Address Book is version 6.1.3. Thanks for your help.

Maybe look in the Preferences > Accounts & disable the iCloud account? That should force it to create a local group then re-enable the iCloud account. I would use the 'File > Export… Addressbook archive' to make a backup before you begin, but it should be fine.
I'm not sure 10.6.8 supported iCloud natively, so perhaps that is why it is being wierd?

How to create new view in WebUI for Product

Hello,
We want to create a new view (Z) based on the fields of the BOL object and show it in the WebUI. Is there any step by step explanation how to do it?
Thanks in advance,
Sergey Kozyrev

Hi Sijo,
The following would be the steps to integrate a z component to a std component:
1. Create the view that you would like to integrate with the standard component in a separate z component and design its configuration
2. Add the view in the Component Interface of runtime repository editor. Executing the z component directly must display the view without any errors
3. In the standard component, add the z component in Component Usage of runtime repository editor
4. In the standard component, add the custom component view in Viewsets->Viewarea->View (overview page view) of runtime repository editor
5. Now the view would be there in the available views of the overview page. Move it to the list of visible view on the right side
6. Execute the std component through Web UI and the view should appear
7. Make sure the Web UI uses the same role config key as that of the overview page in which you have added the view

Problem in Spras field for join condition in creating new views

Hi,
I want to create a new view for three tables t1 t2 and t3 say.....i want to join this three tables like
table    field         table   field
t1      mandt     =   t2     mandt.
t1      vkbur      =   t2      vkbur.
And other condition is t2-spras = 'E' now.... how should i give this condition in the join condition as u have to give the other table name and the field name on the other side too..... table t1 has no filed in its table for the field spras.........so i just have to give t2-spras as 'E'. But this is throwing error...Please help

Hi,
1.u can specify the first thing i.e. t1 mandt = t2 mandt and t1 vkbur = t2 vkbur in the <b>join conditions</b> even if there is no relation ship b/w t1 and t2 on vkbur.simply u specify the join condition manually.
2.for the second thing....wat u did is rite.......
I think it will work.
Thanks ,
Jyothi.D
want to create a new view for three tables t1 t2 and t3 say.....i want to join this three tables like
table field table field
t1 mandt = t2 mandt.
t1 vkbur = t2 vkbur.
And other condition is t2-spras = 'E' now.... how should i give this condition in the join condition as u have to give the other table name and the field name on the other side too..... table t1 has no filed in its table for the field spras.........so i just have to give t2-spras as 'E'. But this is throwing error...Please help

Create a new view under a component in IC Webclient UI

Similar Messages

Maybe you are looking for