Create a pullup banner for show - beginner
Hi there,
I would like to create a pull up banner for my company to bring at exhibitions, shows etc and I would like to use InDesign as I feel more comfortable with this software. Do you have any advises? How big the font should be? Any good tutorials? I checked on YouTube and it was pretty useless.
Thanks a lot
A -
Most printers have different sizes for their pull up banners which results in different dimensions.
Some will want it designed at full scale. Some will want you to work at 1/4 scale and so on.
You should also enquire about the resolution your images should be at for good reproduction.
Similar Messages
-
Create user just use for show running-config
Dear Cisco support team,
I want to create a user account on ASA 5520, which just has one function: show running-config.
How to modify privilege, and set this privilege just excute this command: show running-config.
Can you help me ?
Thank you.
Dang Nguyen,
Viettel Cambodia Company.If the chassis is loaded with line cards, why then CPU utilization for five seconds: 11%/1%; one minute: 9%; five minutes: 9%?
The configuration of each line cards are stored in each line cards. There maybe a 40 Gbps backplane line but some commands have "low priority" communicating between the different line cards and up to the supervisor card.
You'll see similar sort of behaviour too when you stack seven to nine 3750/G/E/X switches together. -
I need to design some wording that wraps around a logo on a T Shirt and was wondering if there is something in available or may be some application that I can purchase in the Apps Store
ArtText>preferences>chessboard. This is equal to .png alpha channel.
-
how can I create a banner for my blog. specifically how can I copy the text box and save it as an image?
Probably the simplest way other than copy and paste (which may or my not work) is to take a screenshot of the text.
With the text box visible, CMD-SHIFT-4 - that will turn your mouse pointer into cross-hairs > click (and hold) at the upper left corner of the text and drag to the lower right corner of the text box > release the mouse button. a PNG file will be created entitled "Screenshot XXX.PNG" where XXX is the timestamp. Use this image on your banner. -
I m unable to create an apple id for iCloud as its showing that the limit for creating a free id is no longer available on your device
Yes. On the other iPhone go to Settings>iCloud, scroll to the bottom and tap Delete Account. This will delete the account from the phone but not from iCloud. Any data being synced with iCloud on this phone will be deleted from it when you delete the account, but will sync back with you sign back in later.
After deleting the account, set up a new one with a different Apple ID. Then delete this account from the phone and sign back into the original account to sync the iCloud data back to this phone. You can then go to the other phone (the one that doesn't have any remaining accounts on it) and sign into the new account you just created on your other phone using the ID you used to create it. -
The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?
HI..
The None option is not available in all countries
iTunes Store: Which types of items can I buy in my country? -
How to make a really basic pong game for a beginner
Hello. I've read through a couple of threads on here dealing with making a game of pong in LabView, but in them the users had questions with far more complex aspects of the program than I want to deal with. I am a beginner programmer in LabView with limited experience in Java and Visual Basic programming. I was tasked with creating a game over winter break, and now that I finally have some time (this weekend that is), I decided that I'd make a really simple game of pong. However, I have seriously overestimated the difficulty of this for a beginner who has very limited knowledge of Lab View.
I ask you to please have some patience with me.
I know what I want to do, and just need help inplementing it.
Here is the idea for my design to keep it as simple as possible:
-Create a field (I am not sure what to use for this, but from my reading it appears that some sort of a picture output is needed, but I cannot find that anywhere).
-Set up some simple function that can output the dimensions of this field to use with collision tracking.
-Create a ball that can be tracked by the program.
-From my reading I understand that the simplest way to "bounce" the ball off the sides appears to simply reverse the X velocity of the ball when it strikes the vertical boundaries and the Y velocity when it strikes the horizontal boundaries.
-Insert some sort of a "paddle" that the user can control with the left and right arrow keys.
Now, as I have mentioned I am a beginner with approximately one month maximum knowledge of this software, spread over about a year. I want to take things slow. So for starters, would anyone be willing to walk me through creating a visual output for this and creating a ball that will bounce off all sides?
If I can at least get that far for now, then I can move on (with help I hope!) of inserting an interactive interface for the "paddle."
I have found some LabView code for a simple game like this, but it also includes a score keeping loop as well as an "automatic play" option, and I am attempting to wade through all that code to find the bones of it to help me with this, but due to my inexperience, this might thake a lot of time.
I thank you for any and all help anyone may be able to provide.EchoWolf wrote:
-Create a field (I am not sure what to use for this, but from my reading it appears that some sort of a picture output is needed, but I cannot find that anywhere).
Wel, there is the picture indicator in the picture palette. In newer versions it's called "2D picture". The palettes have a search function. Using the palette search function is a basic LabVIEW skill that you should know. If you've seen the example for the other discussion, it uses a 2D boolean array indicator. The boolean array is only recommended for a monochrome very low resolution display.
EchoWolf wrote: -Set up some simple function that can output the dimensions of this field to use with collision tracking.
-Create a ball that can be tracked by the program.
That seems backwards. Properly programmed, the code always knows the dimension and the ball position. The program generates, (not tracks!) the ball movement. Of course you need to do some range checking on the ball position to see when it collides with the walls.
EchoWolf wrote:
-From my reading I understand that the simplest way to "bounce" the ball off the sides appears to simply reverse the X velocity of the ball when it strikes the vertical boundaries and the Y velocity when it strikes the horizontal boundaries.
Of course you could make it more realistic by keeping track of three ball parameters: x, y, spin.
EchoWolf wrote:
-Insert some sort of a "paddle" that the user can control with the left and right arrow keys.
Pong is typically played with the up-down arrow keys.
EchoWolf wrote:
Now, as I have mentioned I am a beginner with approximately one month maximum knowledge of this software, spread over about a year.
LabVIEW knowledge is not measured in time units. What did you do during that month? Did you attend some lectures, study tutorials, wrote some programs?
EchoWolf wrote:
So for starters, would anyone be willing to walk me through creating a visual output for this and creating a ball that will bounce off all sides?
I have found some LabView code for a simple game like this, but it also includes a score keeping loop as well as an "automatic play" option, and I am attempting to wade through all that code to find the bones of it to help me with this, but due to my inexperience, this might thake a lot of time.
Start with the posted example and delete all the controls and indicators that you don't want, then surgically remove all code with broken wires.
Alternatively, start from scratch: Create your playing field. Easiest would be a 2D classic boolean array that is all false. Use initialize array to make it once. Now use a loop to show the ball as a function of time.
Start with a random ball position. to display it, turn one of the array elements true before wiring to the array indicator using replace array subset.
Keep a shift register with xy positions and xy velocities and update the positions as a function of the velocities with each iteration of the loop. Do range checking and reverse the velocieis when a edge is encountered.
What LabVIEW version do you have?
LabVIEW Champion . Do more with less code and in less time . -
How do I create an expandable window for articles.
Working on a new website design that will have hundreds of articles that look similar to these. These are the teaser links to get the viewer to the main full feature article. My main question is how to I make the article attached to the link so it opens up into a window but not have to create an actual page for it on the site. I hope I am explaining this clearly. I just want it to pop up into its own window. The page that opens up will look like a page from a magazine with photos, text and also some videos.
Thanks a bunch, LanceHi Lance,
You'll need to use the 'featured news' widget. Just go into the options and choose 'show target: on click' and 'hide target: on click.'
Managing "hundreds" of articles like this is going to be a real pain in the arse, so you're maybe better having a seperate blog, and making a popup window that contains the article using the instructions I gave on this post: http://forums.adobe.com/thread/1037307?start=0&tstart=0
Hope that helps! For any more questions, tweet me: @upchurchpwm
Thanks,
Nathan -
This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.
-
Create an Activity Report for Current Week
I would like to create a activity report for the current week. The trick is that if the weekday is Wednesday or earlier (Sunday being the first day of the week), the report shows last week's activities; but if the weekday is Thursday or later (Saturday being the last day of the week), the report shows the current weeks activities.
I have a filter that works in Access but does not seem to work in Siebel. It does just what I explained above:
Between CDate(Int((IIf(Weekday(Now())<=4,Now()-(6+Weekday(Now())),Now()-(Weekday(Now())-1))))) And CDate(Int((IIf(Weekday(Now())<=4,Now()-Weekday(Now()),Now()+(7-Weekday(Now()))))))
Thank you,
David
Edited by: DavidE on Oct 7, 2008 4:17 PMDavid,
try this:
case DAYOFWEEK(CAST(Activity."Planned Start Time" AS date))when 1 then timestampadd(sql_tsi_day,1,CAST(Activity."Planned Start Time" AS date)) when 3 then timestampadd(sql_tsi_day,-1,CAST(Activity."Planned Start Time" AS date)) when 4 then timestampadd(sql_tsi_day,-2,CAST(Activity."Planned Start Time" AS date)) when 5 then timestampadd(sql_tsi_day,-3,CAST(Activity."Planned Start Time" AS date)) when 6 then timestampadd(sql_tsi_day,-4,CAST(Activity."Planned Start Time" AS date)) when 7 then timestampadd(sql_tsi_day,-5,CAST(Activity."Planned Start Time" AS date)) else CAST(Activity."Planned Start Time" AS date) end
This gave me the sunday of the week. You should be able to modify this format for your purposes.
cheers
Alex -
Creating a Crystal Report for B1 without parameters
Hi Experts,
My question is a simple one.
I create a crystal report for SAP B1 8.8 Patch 10 using CR 2008 SP02.
I have no parameters since its showing sales figures of the past month.
But when I run the report in SAP, a selection criteria screen pops up without any fields.
Just OK and Cancel.
I dont want my users to have to click OK. I need the report to pop-up once the user click on the SAP Menu for the report.
My report file has no parameters.
Thanks for the help
DenisDeinis,
In your report, do you mean:
- you have parameter created, but not used in the report? OR
- there is no parameter field in the report at all?
The reason I am asking is:
If you have parameter fields, But, you did not use it in the report, I think when you run the report within SAP B1, it will still prompts for user to enter something.
Also, if you are using subreport, make sure there is no parameter in the subreport, Although you do not use them. Just delete the parameter field from the list if you are not using them.
Edited by: Shwu Hua Gan on Jun 20, 2010 2:59 AM -
I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that same account. Now I can't seem to login to that account and I can't choose the option for forgot password because it will send email to the old workplace. How do I change the email address to a new one that I can access?
If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you! -
Do I really have to create two separate Apps for Ipad1/2 and iPad3?
Hi there DPS-Team
I want to create an iPad-Magazine using the DPS. I read all the stuff about the alternate layouts and watched the videos on the channels. Now I ran into what I might call a problem for that I couln't find a solution yet. With my creative cloud membership I can create unlimited app using DPS...but I simply cannot create one app that supports iPad 1&2 + iPad 3 display resolution???
Here in that article that I ran into where you suggest NOT to create an only iPad3 version: http://blogs.adobe.com/indesigndocs/2012/03/guidelines-for-creating-folios-for-ipad-3.html
- So if I want one issue of a magazine to be iPad3 compatible then I have to create another app?
- Or how this works? I have no expierience in how that looks in the App Store. But does Apple show both versions of the same App in the Store?
- Does the user see both versions of my App in the App Store or only one depending on the version of the iPad he posseses?
- Do I would have to create a diffrent icon for the SD as well as the HD-app so reader could choose in the App Store?
Example: All my apps on my iPad2 of course have 1024x768 but when I recently syncronized the iPad3 with iTunes then I automatically get the update-Info over the App Store icon that I can update the new version of the App optimized for the Retina-Display.
I mean that is a simple feature that nearly all apps are offering. Of course if I would not use the DPS I would have to again hire a developer and pay him for updating my already published app...but at least he could resubmit it supporting both resoutions.
I hope you are getting my point here. That is an important feature that should be build in no matter if I am a Single Edition customer or Business or Enterprise one. If you would do a catalog or something else for your client, he sees that all his apps on his iPad are updating according to his new device. But the catalog app that I did for him not. He would ask why can't you build it that way for me? I would have to explain him: Sorry I cannot create both version in one app, you and your clients have to download two versions of your app if you want to have it look nice. That is not a very good selling argument for me.
I really have to say that if there is no workaround, I am a bit disapointed because it does not make sense to create two seperate apps of the same app. I really would be happy to receive some helpfull advise on how to get both resolutions supported and when that is going to happen or even better...I misinterpreted the whole thing.
And please: NO I don't want to upgrade to business or enterprise edition!
Thank you for your words of advise, opinions and help.
Regards
SushilDear Bob,
I will try that out. But do you see any chance in the near future that when you create an article out of InDesign, that you can then add multiple layouts with different resolutions? Then I wouldhave one article that contains iPad SD&HD as well as V&H.
So that would be a time saver. Create only one folio that already have the different resolutions covered. I only would have to work with one article inside folio-file for all the devices. Just a thought.
Thank you for your quick response. -
How to create a custom measure for each level of a dimension
Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance -
How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell
Maybe you are looking for
-
Meta-Data are missing for table
Dear ALL , I am trying to call "HR_READ_INFOTYPE" from a Java program using rfc and I got this error: " Meta data equal to null is not allowed for field INFTY_TAB with type TABLE in meta data instance TABLES " the required table INFTY_TAB is used as
-
Photoshop CS5+ Default Printer and Remembering Printers in Documents
Yesterday, the last thing I printed from Photoshop was to my Fax subsystem. Today I opened three new raw files, all of which were destined for printing. This ended up causing the print dialog to initially point to my Fax service for each of the thre
-
Proximity sensors not working in lumia 520
My proximity sensors not working during calls . Pls help me fix the bug. I updated from amber to lumia black
-
HI sap experts, Please guide to maintain LTC for self through portal , where is it configured let me know Path :ESS> Payment> Reimbursement Module (Java) Employee Number 300 in QLT 456 IT0589 is maintained. Error while creating LTA claim for self. R
-
I have tried to download an audiobook that contains Two Parts. The second part was successful in downloading. However, the first part was not. I keep getting "Part 1 could not download at this time". I should have enough space for the download.