Create a rule using bounce to sender

I want to create a mail rule that can bounce the email to the sender based on a pattern of keywords in the email. The purpose is to avoid certain topics of discussion from my friends and "NOT to fight spam". How can I get this feature in applescript code so that I can tell mail to run the code everytime it recieves email from a sender or from a group in my address book?
Thanks in advance,
DJ
G4 dual Mac OS X (10.4.4)
Mac OS X (10.4.1)

I got a Mail Script that does this from here: http://mac.softpedia.com/get/Internet-Utilities/Bounce-Mail.shtml

Similar Messages

Create a rule using a flow

Can anybody help me to create a rule in OPA for the flow mentioned below. How can I make use of rule loop for the flow?
Step #     Activity (with Description) Goto
1     Update beneficiary info (if applicable) in the Elevation
spreadsheet for beneficiary account elevation for DB & HW benefits and send for processing. Step 2
2     Did batch produce rejects? (Yes/No) If Yes then step3 and If No then step5
3     Research reason for elevation reject ? Step 4
4     Resolve issue and update Elevation Spreadsheet ? Step 1
5     Create Life Event in HW Survivors Account to assign coverage to Survivor. Goto death initiation flow(//death initiation is some other flow//)
Please tell how can I create a rule for this flow?
Edited by: 902867 on Dec 16, 2011 8:25 AM
Edited by: 902867 on Dec 16, 2011 8:27 AM

Generally speaking rules should be declarative, not "flows" or "loops" (which would be procedural rather than declarative). Declarative (natural language) rules are generally specified in the following format: Do/Decide something if ...
This format enables rule authors to specify complete truths/policies without having to consider how the other hows, whats, whens that are required when specifying flows or procedures (which often assume something else happened first or will happen later and therefore require the author to check / ensure that those assumptions still hold whenever a policy requires a change).
Getting back closer to your question, I would suggest the following:
Assume the "Send for processing" bit is the external application deciding to consult OPA to make a determination. The external app sends in the relevant data. The rulebase might contain rules similar to the following:
rejects were produced if ...
<something> is rejected (what is the thing being rejected and should the rules specify the conditions under which the something is rejected)
the <something> should be investigated due to a rejection if
the something is rejected (you might care about which reasons in your rules?)
the survivor is assigned the coverage if
rejects were not produced and (what other conditions specify when to assign a specific coverage to a specific survivor?)
the death initiation flow should be initiated if
the survivor is assigned the coverage
One thing to keep in mind with declarative specification of rules / policies is that the order of the rules in the rule documents does not matter (i.e. the author need not be concerned with the order of specified rules nor order in which the rules will be evaluated). All decisions which can be made based on available data will be made and only those rules that can reach a definitive conclusion based on the data will "execute" and reach the conclusion specified in the rule.
Hope this helps ...
BTW - The OPM help and available training on the products provide a significant amount of content on how to approach writing rules (vs. traditional procedural / flow based coding). A few quick examples from the Oracle Policy Modeling Help: "What is a rule?" and it's related links, the topic "Rule principles for Oracle Policy Modeling", etc.

Create a rule in Rule Editor using a function module

Hello all,
I want to create a rule using Rule Editor.
As the requirements are complex, I created a function module; and I want the rule to call the function module
My company already done this in the past, but the function module was supposed to fill a composition
Here, it is a little bit different because I want the function module to fill characteristics in a property. I've tried to create the rule on rule editor which will call the function module but is doesn't work
Have some of you already used rule editor with a function module?
If yes, can you tell me if there are some "mandatory" parameters to add in Rule Editor to allow it to work?
Thanks for your help on this topic
Regards
Stephanie

Hi,
There is well defined pdf is exist on google. please search and help yourself.
Use google search term "How to Write a Routine for 0CALDAY in infopackage selections".
Let me help you how to find it.
Let me google that for you
Thanks

Warning while creating settlement rule

Hi,
I have a scenario where user is creating distribution rule using CJIC ( Final settlement rule). Here user is getting a warning message Enter %, equivalence No, or amount.
Please note that here even after the % = 100 to FXA, the user is getting this warning everytime.
Can someone please help me wht could be the reason for same ?
BR
Anjali

Hi
Try to enter "Either" % "OR" Equiv no. "OR" amount only & check.
regards

Is there a way to create a rule that sends and Auto Response for a shared mailbox?

I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
[email protected]
[email protected]
[email protected]
I would like to create a rule that would send an auto response when someone emails one of these addresses. However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
Nate

Hi
we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
2. Configure the Outlook account for the shared mailbox in Outlook.
3. Click Rules > Manage Rules & Alerts.
4. Create a rule like the following format:
Apply this rule after the message arrives
Have server reply using a specific message
Except if the subject contains specific words
Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
5. Apply the auto reply rules for this shared mailbox.
Then users can receive auto reply of the shared mailbox except the exceptions we have set when they send messages to this shared mailbox.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

I have created a group in my address book, but when I try to use it to send out a group email, only a comma shows up. How do I send out an email using my new group contact list?

I have created a group in my address book, but when I try to use it to send mail, only a comma shows up. How can I send mail using my new group? I have an IMac with OSLion.

I will agree with you on this one. Version 31 and all the fixes so far are a mess. Since I have been here answering questions for a little more than a year now I have learned to wait to upgrade until all the dust settles. I see no end to the dust storm version 31 has caused. I am still on version 24.6 and plan on staying there for the duration. At least until the developers comes to their senses and put out a working product.

Download runtime version of rule used and create in bpm process

Dear experts,
does anybody know, if there is a possibility of updating used brm rules used in a bpm process? There seems to be a way, when you create a separate brm project:
Importing an Updated Project into the Rules Composer - Working with the Rules Manager - SAP Library
How does this work for rules coming from bpm?
Do i really have to manually export and import things e. g. over excel for this?
Regards,
Markus

Dear Siddhant,
thanks a lot for your reply. You got it perfectly right.
What do you mean with "always points to the updated rules"?
Do you mean, that using the "Download runtime version" feature on the brm project helps us to keep the rule up-to-date within NWDS?
Regards,
Markus

How to Create Windows Firewall Predefined rules using Powershell

Windows Firewall Predefined rules using Powershell
Following commands are working some time however sometimes it's giving errors. Any help would be appreciated
WORKING ==> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True
Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Inbound
NOT WORKING
PS C:\Windows\system32> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Outbound
Set-NetFirewallRule : One of the port keywords is invalid.
At line:1 char:1
+ Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Dire ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_NetFirewal...ystemName = ""):root/standardcimv2/MSFT_NetFirewallRule) [Se
t-NetFirewallRule], CimException
+ FullyQualifiedErrorId : HRESULT 0x80070057,Set-NetFirewallRule
PS C:\Windows\system32> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Outbound
Set-NetFirewallRule : One of the port keywords is invalid.
At line:1 char:1
+ Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Dire ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_NetFirewal...ystemName = ""):root/standardcimv2/MSFT_NetFirewallRule) [Se
t-NetFirewallRule], CimException
+ FullyQualifiedErrorId : HRESULT 0x80070057,Set-NetFirewallRule
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

The command:
Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Outbound
produces the output:
Name : FPS-NB_Session-In-TCP
DisplayName : File and Printer Sharing (NB-Session-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Session Service connections. [TCP 139]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Session-Out-TCP
DisplayName : File and Printer Sharing (NB-Session-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Session Service connections. [TCP 139]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-SMB-In-TCP
DisplayName : File and Printer Sharing (SMB-In)
Description : Inbound rule for File and Printer Sharing to allow Server Message Block transmission and reception via Named Pipes. [TCP 445]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-SMB-Out-TCP
DisplayName : File and Printer Sharing (SMB-Out)
Description : Outbound rule for File and Printer Sharing to allow Server Message Block transmission and reception via Named Pipes. [TCP 445]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Name-In-UDP
DisplayName : File and Printer Sharing (NB-Name-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Name Resolution. [UDP 137]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Name-Out-UDP
DisplayName : File and Printer Sharing (NB-Name-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Name Resolution. [UDP 137]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Datagram-In-UDP
DisplayName : File and Printer Sharing (NB-Datagram-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Datagram transmission and reception. [UDP 138]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Datagram-Out-UDP
DisplayName : File and Printer Sharing (NB-Datagram-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Datagram transmission and reception. [UDP 138]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP4-ERQ-In
DisplayName : File and Printer Sharing (Echo Request - ICMPv4-In)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP4-ERQ-Out
DisplayName : File and Printer Sharing (Echo Request - ICMPv4-Out)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP6-ERQ-In
DisplayName : File and Printer Sharing (Echo Request - ICMPv6-In)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP6-ERQ-Out
DisplayName : File and Printer Sharing (Echo Request - ICMPv6-Out)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-LLMNR-In-UDP
DisplayName : File and Printer Sharing (LLMNR-UDP-In)
Description : Inbound rule for File and Printer Sharing to allow Link Local Multicast Name Resolution. [UDP 5355]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-LLMNR-Out-UDP
DisplayName : File and Printer Sharing (LLMNR-UDP-Out)
Description : Outbound rule for File and Printer Sharing to allow Link Local Multicast Name Resolution. [UDP 5355]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
The command:
(Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Outbound).DisplayName
shows the display names of the 14 outbound rules in the FPS group:
File and Printer Sharing (NB-Session-In)
File and Printer Sharing (NB-Session-Out)
File and Printer Sharing (SMB-In)
File and Printer Sharing (SMB-Out)
File and Printer Sharing (NB-Name-In)
File and Printer Sharing (NB-Name-Out)
File and Printer Sharing (NB-Datagram-In)
File and Printer Sharing (NB-Datagram-Out)
File and Printer Sharing (Echo Request - ICMPv4-In)
File and Printer Sharing (Echo Request - ICMPv4-Out)
File and Printer Sharing (Echo Request - ICMPv6-In)
File and Printer Sharing (Echo Request - ICMPv6-Out)
File and Printer Sharing (LLMNR-UDP-In)
File and Printer Sharing (LLMNR-UDP-Out)
If your output is different than this, it means rules have been removed (or added) to the File and Print Sharing group.
For example, if you run the command:
New-NetFirewallRule -DisplayName "My test rule 2" -group "File and Printer Sharing" -Enabled True -Protocol tcp -LocalPort 12346 -Direction Inbound
This adds a new inbound firewall rule to the FPS group. Output looks like:
Name : {06449724-944b-4048-834f-8870b9dce4f6}
DisplayName : My test rule 2
Description :
DisplayGroup : File and Printer Sharing
Group : File and Printer Sharing
Enabled : True
Profile : Any
Platform : {}
Direction : Inbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
This test rule is of course useless because there's no listener on TCP port 12346 on this particular machine..
The new rule can also be viewed in Windows Firewall with Advanced Security:
Now if you run the command:
(Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Inbound).DisplayName
the output will look like:
File and Printer Sharing (Spooler Service - RPC)
File and Printer Sharing (Spooler Service - RPC-EPMAP)
My test rule 2
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Problem using "Create Business Rule Design Definition" utility

Hi everyone,
I tried to create a business rule with Headstart Utilities - Create Business Rule Design Definition (Revision 6.0.0.20) and I got the following errors :
Errors
Message
Combination of Message Prefix and Message Number (SGM-ENG) does not match format AAA-NNNNN.
Activity aborted with ORACLE internal errors.
-1400 ORA-01400: cannot insert NULL into ("HST50"."QMS_MESSAGE_TEXT"."LANGUAGE")
I suppose that the utility concatenate the message prefix and the language to build the error message.
Our Oracle Designer version is 6.0.3.9.0, Headstart 2.1.2 with patch 12.4 and Developper is 6.0.5.35.3
Any patch available?
Regards,
Jerome Couture

Tim,
Headstart should be able to check out any tables you need.
We think we have the user settings
done correctly, but there may be something that we
have missed. How can we get Headstart to
automatically check-out the table(s) for which we
want to run the Business Rules design transformer?The user settings you need are (see also pages 5-7 and 5-10 in the Headstart User's Guide):
- Under 'Process the following objects', choose 'Checked out by anyone'
- Also check the check box '... also Checked In objects'
- Choose whether you want to automatically check out with or without lock
If this does not help, please run the utility with log level 'Debug Detailed' (can also be set in the User Preferences) and report the last few lines of the log messages. They should give an indication of why the check out does not succeed.
Hope this helps,
Sandra Muller

How to create rewrite rule to accept only mail pass from antivirus server

I want to set JES messaging 6.0 to accept only mail that scaned from antivirus server. If clients send direct to messaging server it will forward that mail to antivirus server. After mail was scaned it is sent to messaging server and messaging server accept it.
How to create rewrite rule for this case?

Please read this technical note, for setting up such a configuration:
http://ims.balius.com/downloads/AlternateConversion.pdf
Please note, this site contains some other very useful information for Messaging Server, but IE browsers are NOT supported. You must use some other browser.

How to create Alert Rules???

Hi all,
iam creating Alert rule,i have doughts in creating Alert Rule.
In Alert Rule Definition we have two check boxes.
1)Rule active
2)Suppress multiple alert of this rule
what does this two check boxs do,dont give me links please explain me
in condtions we have drop down in that we have three options.
1)Not relevent
2)yes
3)no
what all this three means.
iam checking for INBOUND and OUTBOUND interfaces idoc to file and file to idoc sceanrios.
should i give all sender and receiver details...
after creating Alert rules sholud i create any thing in ALERTINBOX.......please giave me all details of alerts.
Please explain me in detail.
Regards,
Phani
Points will be rewarded if Helpful

go through this
blog on step by step process configuration.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2328. [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
For BPM
Alert Message - BPM
Also check this
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/03/03/alert-management--use-it-in-ccms-to-shorten-response-times-for-business-critical-situaltions
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b -- How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 -- Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Alerts
transaction handling in XI
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox
CCMS ALERTS
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Thanks
<b>Reward if it is useful</b>
regards
sasi
Message was edited by:
RSK

How to create Settlement Rule

Hello Experts,
I need to create settlement rule for work order.
Got one FM K_ORDER_SRULE_ADD but don't know how to use it.
Is this FM correct one to create settlement rule?
Can anyone please send sample code for FM?
Thanks in Advance,
Ripal.

Hi everybody,
I found in a Rusian foruma way to create a settlement rule using the functions of the FM KOBS. I changed a bit the code because my requirement was just to update the field URZUO of the settlement rule. The original post (in Russian) can be found here.
My implementation is more simple because the requirement was different:
types: begin of ty_objnr,
objnr    like prps-objnr,
end of ty_objnr.
*.COBRA-Buffer (see FM KOBS)
types: begin of ty_cobra_buf.
        include structure cobra.
types:   uflag like dkobr-upd_flag,
       end of ty_cobra_buf.
types: ty_t_cobra_buf type ty_cobra_buf occurs 10.
*.COBRB-Puffer mit Änderungsflag (see FM KOBS)
types: begin of ty_cobrb_buf.
        include structure cobrb.
types:   uflag like dkobr-upd_flag,
       end of ty_cobrb_buf.
types: ty_t_cobrb_buf type ty_cobrb_buf occurs 10.
* Internal tables                                                    *
data: it_abrechnug      type standard table of ty_abrechnung,
      it_objnr          type standard table of ty_objnr,
      it_cobra          like table of cobra with header line,
      it_cobrb          like table of cobrb with header line.
* Data                                                                *
data: wa_cobra_buf      type ty_t_cobra_buf,
      wa_cobrb_buf        type ty_t_cobrb_buf,
      wa_objnr            like line of it_objnr,
      wa_urzuo            like cobrb-urzuo,
      l_mem_cobrb         like wa_cobrb_buf[],
      l_mem_cobra         like wa_cobra_buf[],
      l_mem_cobrb_zeile   like line of l_mem_cobrb,
      l_mem_cobra_zeile   like line of l_mem_cobra.
form urzuo_aendern using    p_objnr p_pspnr p_urzuo.
data: c_objnr like prps-objnr,
        c_pspnr like prps-pspnr,
        c_urzuo like cobrb-urzuo.
c_objnr = p_objnr.
c_pspnr = p_pspnr.
c_urzuo = p_urzuo.
refresh: it_objnr,
           it_cobra,
           it_cobrb,
           l_mem_cobra,
           l_mem_cobrb.
wa_objnr = c_objnr.
append wa_objnr to it_objnr.
* Reas settlement rule from the DM
call function 'K_SRULE_PRE_READ'
exporting
    i_pflege               = ' '
tables
    t_sender_objnr         = it_objnr
*         T_COBRA                =
exceptions
    wrong_parameters       = 1
    others                 = 2.
if sy-subrc <> 0.
    perform error using c_pspnr sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
* Fill internal buffer with settlement rules
call function 'K_SETTLEMENT_RULE_GET'
    exporting
      objnr     = c_objnr
      x_all     = ' '
    tables
      e_cobra   = it_cobra
      e_cobrb   = it_cobrb
    exceptions
      not_found = 1
      others    = 2.
if sy-subrc <> 0.
    perform error using c_pspnr sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
* Save settlement rule in ABAP-Memory
call function 'K_SRULE_EXPORT_IMPORT'
    exporting
      i_mode     = 'EX'
    exceptions
      wrong_mode = 1
      others     = 2.
if sy-subrc <> 0.
    perform error using c_pspnr sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
* Read ABAP-Memory
import l_mem_cobra l_mem_cobrb from memory id 'K_SRULE'.
* Change field URZUO and set Update-Flag
loop at l_mem_cobrb into l_mem_cobrb_zeile where urzuo is initial.
    l_mem_cobrb_zeile-urzuo = p_urzuo.
    l_mem_cobrb_zeile-uflag = 'U'. "Update Kennzeichen
    modify l_mem_cobrb from l_mem_cobrb_zeile transporting urzuo uflag.
endloop.
* Clear internal buffer
call function 'K_SETTLEMENT_RULE_REFRESH'
    exporting
      objnr = c_objnr.
* Fill ABAP-Memory with new rules
export l_mem_cobra l_mem_cobrb to memory id 'K_SRULE'.
* Fill internal buffer with new rules
call function 'K_SRULE_EXPORT_IMPORT'
    exporting
      i_mode     = 'IM'
    exceptions
      wrong_mode = 1
      others     = 2.
if sy-subrc <> 0.
    perform error using c_pspnr sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
* SAve new rules
call function 'K_SETTLEMENT_RULE_SAVE'
    exporting
      dialog            = 'X'
      objnr             = c_objnr
      i_status_update   = ' '
    exceptions
      no_rule_for_objnr = 1
      others            = 2.
if sy-subrc <> 0.
    perform error using c_pspnr sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
commit work.
perform erfolg using c_pspnr.
endform.                    " URZUO_AENDERN
Hope it helps,
Jaime

Create a Rules Language process which add a XML payload

how to create a Rules Language process which add a XML payload in to the ICEPAYLOADEXT table??

Take a look at this post: How to send a request from MDM 1.6.1 to CC&B using JMS servers?

AME can i create a Rule type List Creation and category For Your Info?

Hi,
I have created two rules.
1st rule create the list of approvers to approve the leaves i.e. supervisor then department head.
Till this every thing is going fine transaction are getting approved by both approvers and leave is crated in Application.
Now I create 2nd rule to send FYI notification to HR Administrator.
When employee Appling for leave it shows the list of approvers correctly i.e. supervisor, department head as approvers and HR Administrator FYI notify.
Now HR Administrator opens the notification and close the notification and Approvers approved the transaction. PPROBLEM IS Transaction is not getting close and hence leave is not getting create in application._
Edited by: SHEIKHG on Aug 28, 2009 9:11 PM

No I have not customized the workflow. becuse the notification have all details if the rule is list creation. But if rule type is post-chain-of-authority approvals or pre-chain-of-authority approvals then the notificaiton has no useful info.
Thats why I want to use Rule Type List creation for FYI notification. But when i do so my transaction is not getting complete.

Transport rule exchange 2010 not sending reply gets stuck in Queue

I am trying to set up a transport rule in exchange 2010 that will auto reply to a email address that is no longer valid. One of our exec passed away and they want a reply setup to send an automatic message. I read somewhere that the auto reply may not be
the right way to go about this so I was trying to setup a transport rule. I used the wizard to make the rule for conditions 1 all outside email addresses 2 sent to the internal email address specified. Actions 3 Send rejections message to sender with enhanced
status code
Created the message in the rule and gave it a status code 5.7.228 no exceptions and created the rule
Went to an outside email account and sent to the internal users account. It was reported that it was delivered from our mail filter I verified that it did not get delivered to the user then a few min later the reply appears in the queue viewer on exchange
a few min later it is gone I figured it worked but when I checked it did not get delivered to the outside email address or seen going through the mail filter. I'm missing something I know its right there somewhere just looking to long and I cant see it.
This is baffling me as to what happened? What account is it sent from? The user, administrator or do I need to create a postmaster account for it to work? I am a one man shop and it get kind of baffling some times
Thanks in advance for any help I will keep looking for the answer
John R
John R

Hi John,
From your description, I would like to verify the following things for troubleshooting:
1. Please verify if users can send messages to external email addresses.
2. Please check if internal users can receive the rejection messages.
Best regards,
Amy Wang
TechNet Community Support
Yes users can send to external address and internal users receive NDR rejection messages
The system has been in production for 2 years. I'm just trying to find the best way to setup a auto reply for users that are no longer with us or have moved on.
Thanks for your help
John R

Create a rule using bounce to sender

Similar Messages

Maybe you are looking for