How to create rewrite rule to accept only mail pass from antivirus server

I want to set JES messaging 6.0 to accept only mail that scaned from antivirus server. If clients send direct to messaging server it will forward that mail to antivirus server. After mail was scaned it is sent to messaging server and messaging server accept it.
How to create rewrite rule for this case?

Please read this technical note, for setting up such a configuration:
http://ims.balius.com/downloads/AlternateConversion.pdf
Please note, this site contains some other very useful information for Messaging Server, but IE browsers are NOT supported. You must use some other browser.

Similar Messages

Where and how to create business rules?

Hi All,
1) Where and how to create business rules?
2) How to configure Rule Engines (Ex: JRULE Engine or any other Rule Engines)?
3) Whar products are available for Rule Engines?
Thanks in advance

Hi,
You have some options on business rules.
If you just want to create business rules that are easy for business owners to edit without a lot of training, Oracle BPM has a simple business rules creation and end user edit capability. The benefits to using the rules that come with Oracle BPM are:
<li> they are simple and easy to edit
<li> end users can get up to speed quickly to edit them
<li> when changed, the business process is immediately impacted
<li> they can use the Oracle BPM business parameters that also come with the product
Drawbacks are:
<li> you can only use Project variables as the variable content inside of them
<li> if a company already has a business rules engine, they are different that the company's standard
Business rules engines have been used with Oracle BPM. If you are a consultant, first ask if there is a standard business rules engine that the company already has purchased that they use (e.g. iLog from IBM, Corticon...). If this is the case, you typically integrate to the rules using a web service interface that the business rules engine exposes.
If they do not already have a business rules engine, consider Jrules. The benefits are:
<li> it is a part of the Oracle BPM Suite that they might have purchased
<li> version 11g of the Jrules is coming out soon with a friendly front end
Hope this helps,
Dan

How to create an rule with action to subtract from the event log of Ips manager express console?

how to create an rule with action to subtract from the event log of Ips manager express console?, some knows of has an guide?.
Thank you.
Sent from Cisco Technical Support iPad App

Hi,
http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"
http://www.cisco.com/web/partners/tools/pdihd.html

How to create sharepoint Group with read only permissions using powershell for entire site ?

How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply.

How to create a program that accepts 5 digits from the user between 0 and 9

how to create a program that accepts 5 digits from the user between 0 and 9 then put them in ascending order using link-list method..

You can use a scanner to get user input from the command line.
import java.util.*;
public class Test {
    private List<Integer> list;
    private Scanner in;
    public static void main (String... args) {
        new Test ();
    public Test () {
        list = new LinkedList<Integer> ();
        in = new Scanner (System.in);
        for (int i = 0; i < 5; i ++) {
            System.out.format ("Please enter a number (%d more): ", (5 - i));
            list.add (in.nextInt ());
        Collections.sort(list, new Comparator<Integer> () {
            public int compare (Integer i1, Integer i2) {
                return i2 - i1;
        System.out.println (list);
}

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to create a procedure to send a mail if the Database is down?

Hi,
I have created the below procedure to send a mail if the count is less than 1300. It scheduled daily @ 15 30 hrs. Its fine.
CREATE OR REPLACE procedure SCOTT.hrsmail
is
v_count number;
begin
Select count(*) into v_count from emp;
if v_count < 1300
then
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
cc => '[email protected]',
bcc => '[email protected]',
subject => 'Testing the UTL_MAIL Package',
message => 'If you get this, UTL_MAIL package
else
null; --what you want to do here
end if ;
end;
Sometime the Database is down, so the job is not running.
How to create a procedure to send a mail if the database is down?
Pls help me. Its highly appreciated.
Thanks
Nihar

nihar wrote:
How to create a procedure to send a mail if the database is down?And what if the database is up, but the network down? Or the database up and mail server down? Or mail server undergoing maintenance?
There are loads of "+What if's+" - and in that respect, playing "+What if database is down..+" in this case does not make any sense. You do not use the database to monitor its own up/down status. You do not rely just on SMTP as notification protocol that the database is down.
The correct approach would be using something like SNMP as the monitoring protocol. A monitoring system that can process SNMP and perform some basic root cause analysis (e.g. network to the database server down, database server status unknown). And this system supporting notification methods like SMTP, SMS and so on.

How to create JNDI data source name in Tomcat 6.0.18 server?

Hai,
How to create JNDI data source name in Tomcat 6.0.18 server?
Regards,
MariMuthu.A

[http://google.com/search?q=jndi+site:tomcat.apache.org+6.0]

How to have iPad (iOS 5) import only the JPEG from a RAW JPEG pair?

I have an iPad 2 16 GB, running iOS 5. I also have a Canon EOS 7D. I purchased a CF Card Reader for the iPad (see http://store.micgadget.com/card-readers/280-ipad-2-cf-card-camera-connection-kit .html) so that I can view and edit photos quickly in the field, without having to lug my laptop around. To make this easier, I set my camera to shoot RAW+JPEG. I shoot with the smallest JPEG files possible, still a relatively large for the iPad 2,592x1,728, with the idea that I'd only import the JPEG files to the iPad, but still have the RAW files to work with when I get back to my computer. This works great with one exception: the iPad doesn't allow me to import only the JPEG files, but grabs the RAW files along with them. As you can imagine, this fills up my iPad rather quickly, and takes quite a bit longer to import than if it only grabbed the JPEGs.
So here is my question: How do I have my iPad import only the JPEGs from the RAW+JPEG pairs on the memory card?
One workaround that helps slightly. If I connect my iPad to my computer after the import, I can go in via Image Capture, select all the RAW images and delete them, leaving the JPEGs behind. This is an underwhelming solution, but does save space after the fact.

What you are seeing is how Safari works now in iOS 5. There is no way to get that icon in Safari now. There other much better browsers available in the App Store. Look at iCab Mobile, Mercury, Atomic, ....
I have been running iOS 5x for so long now, that I don't even remember if that icon did appear in earlier iOS versions

How to create a VI that detects and records responses from user

Does anyone has experience in creating a VI that allows the user to e.g., watch a video or series of images, pause or rewind video etc. and the VI records the duration of all pauses or user responses.

avenue wrote:
How to create a VI that detects and records responses from user
You definitely need to check what 'EVENT STRUCTURE' is and how to use it... because thats needed to write such code.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

How to check the success/failure of e-mail sending from Sharepoint?

Dear Expert,
I connect Exchange 2010 and SharePoint 2010. When user create workflow in sharepoint, it will send the email to confirm. if it's done. but I checked from user they didn't get the email. I would like to know how to check the success/failure of e-mail
sending from Sharepoint?
Thank you

By default, there is no logging mechanism in SharePoint for outgoing mails.
Mails in SharePoint are sent by giving an SMTP sever IP address in Central Administration. SharePoint never sends email directly. It relays or routes mails to the SMTP server. So, logging should be done in the SMTP server itself.
There is also another way of doing it. You can enable SMTP service of IIS for sending emails from SharePoint, which would also just relay the mails to an SMTP Server. But in this case, you can enable logging in your IIS SMTP Service. Please visit this blog
for more details.
In your case you need to check your exchange server for any failure for relaying mails.
Regards, Vikas Patel

How to create distribution rules group for wbs settlement rules

Hi,
How can I create distribution rules group for WBS element settlement rules ?
For some WBS elements I can see(in view mode(cj03)) distribution groups in settlement rules screen but when I try to edit settlement rules I only see default group.
How can i create/edit those groups ?
Regards,
Rafał

Self answered:
CJIC t-code

How to create a report which accepts parameters from the URL

Hi,
I am trying to create a report that would only show the rows based on a criteria. My table has the following structure:
ID number(10)
Review_date date
Review varchar2(1000)
I want the report to display the following query:
Select Review_date, review from t1 where id=:ID;
I need the value of the parameter ID to be accepted through the URl. As in, the requirement wants that a url like www.abc.com:7777/abc?ID=1 should display a page where the report is run for id=1 and the results are displayed.
I have created a report in Portals where id can be entered once the customize link is pressed and the criteria is added. But the requirements state that users should not have to do this, links will be provided to them based on certain criterias, they just need to click on them. Any help is highly appreciated.

You could try the forum for Financial Reporting - Hyperion Query and Reporting
Cheers
John
http://john-goodwin.blogspot.com/

How to create new rules for agent assignment

Hi all,
I have a situation in which the esclation has to occur to the second line manager . is there any rule avail. for agent assignemnt and if not how I can creaet a new rule
Thanks in advance..

Hi,
One way is you can call SWX_GET_MANAGER function module twice for getting your manager's manger.
For creating new rule, you can copy any std rule and themn modify the copied rule using txn PFAC. e.g check out rule - 00000168, which uses above mentioned FM - SWX_GET_MANAGER .
Hope this helps.
Regds,
Akshay

How to create Alert Rules???

Hi all,
iam creating Alert rule,i have doughts in creating Alert Rule.
In Alert Rule Definition we have two check boxes.
1)Rule active
2)Suppress multiple alert of this rule
what does this two check boxs do,dont give me links please explain me
in condtions we have drop down in that we have three options.
1)Not relevent
2)yes
3)no
what all this three means.
iam checking for INBOUND and OUTBOUND interfaces idoc to file and file to idoc sceanrios.
should i give all sender and receiver details...
after creating Alert rules sholud i create any thing in ALERTINBOX.......please giave me all details of alerts.
Please explain me in detail.
Regards,
Phani
Points will be rewarded if Helpful

go through this
blog on step by step process configuration.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2328. [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
For BPM
Alert Message - BPM
Also check this
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/03/03/alert-management--use-it-in-ccms-to-shorten-response-times-for-business-critical-situaltions
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b -- How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 -- Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Alerts
transaction handling in XI
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox
CCMS ALERTS
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Thanks
<b>Reward if it is useful</b>
regards
sasi
Message was edited by:
RSK

How to create rewrite rule to accept only mail pass from antivirus server

Similar Messages

Maybe you are looking for