Create a seperate Via socket754/KT800 forum

Hi mods if you are looking, kindly create a seperate forum for the above mention as there are no proper place for us K8T owners to post our topics and issues and often have to use the socket A forum. Thank you very much.

Thank you very much Bas, now we have own base here
Lucky I bought this board, it seems its the best feature and stable among the other makers, check reviews and feedbacks from peers.

Similar Messages

How to create batch job via a program

hi
i need to know how to create batch job via a program please suggest
arora

Wow!
> Total Questions: 234 (138 unresolved)
...and now you ask this?
Please accept our apologies for not pointing out to you way-back-when already that there is a search functionality here at SDN and that the correct forum should be used to post questions to.
Please read "the rules" at the top of the forum page, and search first => ask questions later.
I take the liberty of closing your question for you.
Kind regards,
Julius

Creating two seperate networks with 2 time capsules?

So i currently have two time capsules. The first one is bridged with my dsl modem and is acting as my internet gateway and backup for my main imac and macbook which are connected wirelessly as well as a file server with addition external harddrive connected via usb.
I want to connect an additional timecapsule via ethernet and use it to create a seperate wireless network that allows my guests, kids macbook and any of his hooligan friends to connect. The second time capsule will allow my kid to back his macbook up. I dont want this network to be able to access my up stream network with my main imac and macbook because I will not be issuing poeple access to it except myself and will lock it down with MAC address filtering.
I am worried as my kid or any guests I allow to access my network can or will be able to reach my main computers and I want to prevent that. Is this possible with two time capsules?

Now if this setup will reduce the NAT doubleing issue on the ps3, xbox and apple tv's thats good?
Should work as long as you understand that these devices are connecting to the Guest Network on your "main" TC. How well wireless will work going through all the obstructions is open to question.
You will also be sacrificing half of the bandwidth on your "main" TC when you enable the Guest Network feature.
There will still be a Double NAT for devices that are connected to TC #2.
My next question is how do I allow everyone to see my ethernet printer? Plug it into TM#2 ethernet port?
Not sure what you mean by "everyone".
If you plug it into the TC #2 Ethernet, devices on the TC #2 network will be able to see it, but not devices on the "main" TC network. Reason....TC #2 is on a different subnet than TC #1......unless you want to setup TC #2 in Bridge Mode.
If it were me, I would password protect all computers and devices on the "main" network, except the printer. Then, connect TC #2 in Bridge Mode and call it a day.
Users on TC #2 will be able to "see" other devices on the TC #1 network, but not connect to them unless they have the password for the device.

Creating a seperate inbox for SMS and MMS text msgs

I followed the instructions on creating the seperate inboxes and it doesnt appear to have worked since my text messages and emails appear in the same basket and when I create the seperate option, a seperate icon does not appear on my blackberry. Has any one experienced this or knows where this seperate inbox is?
Solved!
Go to Solution.

Hi and welome to the forums
Verify the setting used:
from the Main Messgage Queue MENU KEY - OPTIONS- GENERAL OPTIONS
SMS AND EMAIL INBOXES SEPERATE.
Pull the battery while the device is ON, replace after a minute,
let the device reboot 1-3 min, Retry the function that was the problem
Please let me know!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I have an I phone and my own account and just purchased an ITouch for my daughter - how do i create a seperate account for her on my computer?

I have an I phone and my own I tunes account and just purchased an ITouch for my daughter - how do i create a seperate account for her on my computer? I want to make sure that my apps do not sync on her I touch.

Go into Setttings -> Messages and make sure your Caller ID setting for Messages is set properly.

Create Functional Area via Job Architecture in Non-English language

Dear Experts,
We're running following environment.
- Windows Server 2003 Std SP2 64bit (32bit conversion completed)
- SAP ERP 6.0 EhP 4 Unicode system as back-end system for STVN
- STVN 2.1 SP1 with Japanese Language pack
- Language = Japanese and English
- TREX setting is not ready (will be ready soon)
The problem is we cannot create Functional Area via Job Architecture
if we log on Job Architecture module with JAPANESE.
(We can create Functional Area if we log on with ENGLISH)
[Procedure]
1. Launch Job Architecture module with Japanese
2. Job Architecture => Create Functional Area (under Tasks)
3. Key in [Title] and [Abbreviation], and then click [Add]
4. Error message "Not able to load DLL or CLASS" appears
I have already confirmed that if I do same thing with English,
Functional Area was created in ECC environment.
What settings am I missing?
Best Regards,
Masaya Iizumi

Dear Luke and Eugene
Thank you very much for the reply.
I have understood that it is known issue for .NET platform for 2.1 SP1.
I will communicate with Nakisa Support.
Again, thank you very much for your kind cooperation.
Best Regards,
Masaya

How do I create 2 seperate iTunes account for me and my daughter

I already have a iTunes account. Just got my daughter a iPod...BUT I don't know how to create a seperate iTunes account for her on the same computer. I do not want her to have my play list and visa versa.

Launch iTunes with the Shift key held down and create a new library, or use separate Windows user accounts. This isn't the same as using different iTunes Store accounts.
(84543)

There are three users on one laptop and I keep wiping out there libraries. How do I create a seperate Itunes

Not sure what im doing but here goes. There are two of us using itunes on the same lap top with different devices. How do I create a seperate account for me and my device.

The best way is to have each library in a separate Windows User ID.

Create AP payment via Cash Management

Hi all,
In EBS 12.1.3 i try to create an AP Payment via Cash Management Responsibility. But when the forms redirects me where i should create the payment - one of the field/BANK_ACCOUNT_NAME/ is populated by default with strange value. I suppose it should take the value from bank_account_name in the cash header. Instead of this it takes value for another bank/i'm unable to find the logic of taking exactly this bank account.../
For example :
In Cash - Bank acc name = A in Payables - B,
In Cash Bank acc name = C in Payables - D
and so on...
Any ideas? Maybe some settings for creating AP Payments via the Cash Management responsibility?
Thanks in advance,
Bahchevanov.

Hi,
Please check in SM35 if your batch input session was executed successfully.
Mani

Creating Iweb seperate domains for multiple sites DIDNT WORK

Hi! Any help would be much appreicaited!
I am creating mutiple websites in iWeb 09'. All 3 of my websites have been stored under 1 domain file on my mac. I have read numerous discussion boards stating the steps of how to seperate each of the created sites from the one domain file, into mutiple domain files. I followed the steps on this website :
http://lmsdiweb.wikispaces.com/Saving+Locally
I moved the Domain folder out of its original location into a new folder on my harddrive entitled "Sites". Then i made sub folders within that folder and duplicated the domain 3 times and placed each copy in those folders. then i double clicked on the domain for my 1st site, opened iWeb, and then deleted the other sites i did not want on this new "domain" file i created and hit saved. This is exactly what the website said to do to create the seperate domain files for each seperate site. It then said repeat for each site, deleting the sites that are not needed on that domain.
All of that being said, it didnt seem to work when i tried to open the 2nd copy of the domain. When iWeb opened after double clicking the 2nd domain copy, it did not open and show me all 3 sites as it should have, it opened to show me the one site that i just "saved" after deleting the other sites for the previous domain i was trying to create.
I'm afraid i posisbly lost my other 2 sites. I backed up my first initial "domain" file which had all 3 sites within it on my external hard drive, and when i double clicked on that to make sure my sites weren't lost forever, same thing happened and only my lastest site that i saved on the 1st attempt to seperate domain files is visable on my iWeb.
Did i loose everything i created in my other 2 sites? How do i get them back? What did i do wrong? Any help is much appreiciated as i have a feeling i might have made a serious mistake and need some help figuring this all out!
Thank you!
Also, I published all of my sites "to a folder" on my hard drive before doing this as well. Is there any way to take the published folder contents and put my site back on iweb for editing again?

With three sites in a domain file here's how I would do it. Create 3 copies of your domain file and name them for the three website, i.e "website1.sites, website 2.sites, etc.
With the application discussed in the text below open website1.sites and delete website 2 and website 3 from it and save. Open website 2.sites and delete 1 and 3. Do the same for website 3.sites.
Then use the application mentioned below to open iWeb and select the website you want.
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
NOTE: iWeb 2 is not compatible with Mt. Lion and has trouble saving to the hard drive. It's suggested you obtain iWeb 3
OT

Create Purchase Order via Upload.

Hi,
Our company have lost 4 months data due to some hardware problem. After hardware issue resolved we have to post all lost data. Therefore in MM module can it is possible that I can create PO order via BAPI program? We have four type of PO (Inventory, Assets, Changed off and IO). I got a BAPI function "BAPI_PO_CREATE1" can any body tell me how can I you this BAPI to create PO or Upload it?
Thanks
Syed Tayab Shah

Hi
[Sample Code|Re: BAPI-PO;
[Explanation About BAPI|http://abap.wikiprog.com/wiki/BAPI_PO_CREATE1]
Re: BAPI_PO_CREATE1-Runtime error
BAPI_PO_CREATE1
Regards
Pavan

Portal Run time error when created a seperate role for Transport package.

Hi Experts,
I have created a seperate role for Transport Package(import/export iviews).
Normally we have transport package functionality in system admin.
Below steps i followed for creating the new role(trans admin)
1.Copied SAP provided system admin role to a seperate folder.
2.Deleted reamining portal objects(like UWL, portal display etc ..) except transport packege workset.
3.Renamed the role to trans admin.
I have assigned that role to my self, it is working fine to me when i clcik on export and import.I have super admin role.
when i assign this role to some portal users, Export is not working.
when user clicks on Export role they are getting below error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/medium_safety/com.sap.portal.appdesigner.contentcatalog/components/Framework).
Exception id: 12:10_31/08/09_0031_21763550
See the details for the exception ID in the log file
By looking into exception iD also, same error access denied it is showing.
Please Advice.
Thanks
Sony.

Hi Raghu,
Thanks for the reply.
I have given full permissions to all users to this trans admin role before itself.
Thanks in advance.
Sony.
Edited by: ambica sony on Aug 31, 2009 1:53 PM

I am wanting to publish a website created in iweb via a third party web host. How do I put a password for anyone wishing to visit the mysite?

I am wanting to publish a website created in iweb via a third party web host. How do I put a password for anyone wishing to visit the mysite?

You create the usernames and passwords where you host your website. Made with or without iWeb.
Usually it's done in the controlpanel where you manage your account.
If you cannot do it there, you'll have to do it yourself. See this post :
https://discussions.apple.com/message/16014940#16014940
And what is the purpose of password protection for ANYONE who vistis your site?

Create a seperate master rep for dev and test

Hi
We are experiencing poor performance in our Dev/Test work repositories.
This may be due to geographic reasons. The dev/test reps are in different location thousand miles apart from Master/prod work rep.
Am considering creating a seperate Master rep for dev/test. Is this just a matter of:
1. create sql space and new master repository including assigning unique repository ID
3. Export/Import master rep from Production environment using MIMport utility in bin of ODI directory
4. repoint existing dev/test work reps connections to new Master rep?
This is a fairly low use ODI 10g implementation that support Hyperion Planning implementation. Not too many interfaces, changes etc. to manage day to day.
Your advice is appreciated.
Cheers

Hi
We are experiencing poor performance in our Dev/Test work repositories.
This may be due to geographic reasons. The dev/test reps are in different location thousand miles apart from Master/prod work rep.
Am considering creating a seperate Master rep for dev/test. Is this just a matter of:
1. create sql space and new master repository including assigning unique repository ID
3. Export/Import master rep from Production environment using MIMport utility in bin of ODI directory
4. repoint existing dev/test work reps connections to new Master rep?
This is a fairly low use ODI 10g implementation that support Hyperion Planning implementation. Not too many interfaces, changes etc. to manage day to day.
Your advice is appreciated.
Cheers

Trouble Creating Share Point via 'sharing' Command

I'm having trouble creating a share point via the command line using the 'sharing' utility. Basically just trying to script the creation of a /WindowsShares/ share via SMB.
Here is the command:
<pre class=command>sharing -a /WindowsShares/ -n WindowsShares -s 001 -g 000 -i 00 -o 0 -t 1'</pre>
It seems like everything works. <pre class=command>sharing -l</pre> shows this:
<pre class=command>name: WindowsShares
path: /WindowsShares/
afp: {
name: WindowsShares
shared: 0
guest access: 0
inherit perms: 0
ftp: {
name: WindowsShares
shared: 0
guest access: 0
smb: {
name: WindowsShares
shared: 1
guest access: 0
inherit perms: 0
oplocks: 0
strict locking: 1
directory mask: 493
create mask: 420
}</pre>
However, it doesn't seem to write anything to the /etc/smb.conf file... So nothing works.
If I enter the following in smb.conf the share does work:
<pre class=command>[WindowsShares]
oplocks = 0
map archive = no
vfs objects = darwin_acls
path = /WindowsShares
read only = no
strict locking = 1
inherit permissions = 0
comment = macosx
create mask = 0644
guest ok = 0
directory mask = 0755</pre>
However, even after entering this information - when I check 'Share Points' within WGM the share IS listed - but the 'Share this item and its contents' is NOT checked and thus, is confusing and can't be modified from WGM.
Am I missing something when I am creating this share via the CLI?
I assumed using 'sharing' worked the same way as using WGM and checking 'Share this item and its contents' - that works perfectly.
I tried this with 10.4.8 and 10.4.9 Server (Universal).
Any help would be appreciated!

Hi Gary,
Thanks for the reply...
I ran the 'serveradmin' command to discover the SMB settings before and after the change via WGM. I restarted the SMB service as well...
<pre class=command>S999EDC1:~ root# serveradmin settings smb:\*
smb:encrypt passwords = yes
smb:log level = 2
smb:display charset = "UTF-8-MAC"
smb:security = "ads"
smb:deadtime = 5
smb:hide dot files = "yes"
smb:guest account = "unknown"
smb:client ntlmv2 auth = "yes"
smb:preferred master = no
smb:defer sharing violations = "no"
smb:adminCommands:homes = yes
smb:adminCommands:serverRole = "domainmember"
smb:adminCommands:ldapRole = "1.1 - hosting a master LDAP directory server\n"
smb:allow trusted domains = yes
smb:netbios name = "S999EDC1"
smb:lanman auth = "YES"
smb:vfs objects = "darwin_acls"
smb:wins support = no
smb:brlm = "yes"
smb:max smbd processes = 0
smb:server string = "S999EDC1 OS X Server"
smb:os level = 8
smb:domain logons = no
smb:passdb backend = "opendirectorysam guest"
smb:dos charset = "CP437"
smb:realm = "EDU.CBE.AB.CA"
smb:unix charset = "UTF-8-MAC"
smb:auth methods = "guest opendirectory"
smb:local master = no
smb:domain master = no
smb:map to guest = "Never"
smb:use spnego = yes
smb:printer admin = "@admin, @staff"
smb:ntlm auth = "YES"
smb:workgroup = "CBEEDU"</pre>
The only difference was that smb:workgroup = "CBEEDU" and smb:log level = 2 were reversed. The settings were the same though. Thought that was odd.
When making the change via 'sharing', there is no change.
Is there any other documentation on 'sharing' other than the man page and CLI Guide from Apple? I haven't been able to find anything concrete.

Create a seperate Via socket754/KT800 forum

Similar Messages

Maybe you are looking for