Create a Tempo Map to Song recorded without click

i just received a logic project with guitars and vocals which were recorded to no click. whats the simples way to create a tempo map so i can program to it
thanks

record a midi track where you tap the tempo like a conductor, using like a simple click sound or whatever. play it as best you can in time with the music, then edit the clicks so they are perfectly in time or at least as good as you can get it. then use the beat mapping function (I think that is what it's called) to create a tempo map from the midi notes you recorded. that should do it. you can also fine tune the tempo map you've created by opening the global tempo track view and moving the tempo sync points around. there's stuff in the manual on this, you should find it if you search beatmapping or global tempo track.. somewhere in there.

Similar Messages

How can I make freely recorded (without a click) midi tracks follow the tempo of my logic project?

I recorded a band (midi only + 1 room mic for reference) without a click because they wanted to preserve the human feel. Unfortunately, their human feel turned out to be a litlte bit too human. Now I would like to sync up their tempowise shaky midi performance to the original tempo of the song. Is there anybody out there who knows how to do this?

Are you sure you want to do this?
Really?
OK. Go to the manual and study Tempo Interpreter. This will allow you to tap along in time to the music you hear (ideally the audio from the room mic) and set up a tempo map. Actuall is harder than it sounds.
OR. Go to the manual and study Beat Mapping. You can do this to the audio (your room mic) or to midi (maybe a beter idea). It involves reading the manual (sorry about that, but it's worth it) So. Beat map your project to the performance. A bit labour intensive note by note, but ultimately it works.
Either way, if successful, you now have a logic project where the tempo map is synced to the perfomance.
Now you can adjust the tempo map. Go to the tempo operations menu, and try various alternatives. The simplest would be "create constant tempo", but then the tempo would be fixed. From there though, you could quantise as suggested above. The Q-strength option, where the quantisation strength is adjustable, is a fabulous feature for retaing some sort of human-ness.
Good luck. Better you than me.

How can I increase the tempo of a song without distorting the vocals?

I have a song I recorded, with the vocals and backing track on seperate tracks.
The song has been recorded a bit too slow, and I need to increase the tempo. However, when I do this, the vocals become distorted and have a wavy sound.
Is there any way I can increase the tempo of the song without distoring the vocals? I've tried doing it on the final song (merged tracks) and on the vocals alone, but nothing seems to work. It doesn't make sense, since when you do the same thing to a song by a professional artist, you can increase the tempo of the song without distoring the vocals.
What am I doing wrong? How can I increase the tempo of my song without distoring the vocals?
Any help would be greatly appreciated.

in general GB doesn't do such a great job with changing tempo of audio recordings, what you might find works better is to export your song uncompressed and then use an audio editor:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is it possible to create info record without material number

Hi all,
Is it possible to create infor record without material master and what is the importance of the field Info update in PO.
Thank you for the help.

Hi,
1.Yes you can create Info record without material no. but you have create it for material group.Go to ME11 and only enter vendor ,Purchasing organization , and Plant don't enter material no.. and again enter maitain material gruop and require data for Material group.
2.Info Update indicator -
Info record update
    Determines whether the prices and conditions of this purchase order ite
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
reward if helpful,
Regards,
Chetan.

TS1424 My recent downloads was not complete, song & videos stopped short of end of song or video. How do I get the entire recording without purchasing them again?

My recent downloads was not complete, song & videos stopped short of end of song or video. How do I get the entire recording without purchasing them again?

you will probably need to recreate your itunes library to get the complete song. view the article on how at apple.com/support and search for HT1451

FRM-41106 You cannot create records without a parent record.

Hello!
Forms 6i.
I have a Parent-Detail-Relationship. At the Detail-Block a "When-create-record" sets some default values on the Detail-Block.
I got error "FRM-41106 You cannot create records without a parent record" when the Parent-Block executes a execute_query.
I debuged the problem an found out, that the error appears in the standard-programunit "Clear_All_Master_Details".
The error appears, when the code is deleting the detail-block "code: Clear_Block(NO_VALIDATE)".
This is strange: The error appears only when I uses the "When-create-record"-trigger on the detail-block.
If a comment out the trigger, no error appears.
Why Is a "When-create-record"-trigger initiated when deleting the detail-block?
Default-Code of "Clear_All_Master_Details":
-- Clear all the detail blocks for this master without
-- any further asking to commit.
currel := Get_Block_Property(trigblk, FIRST_MASTER_RELATION);
WHILE currel IS NOT NULL LOOP
curdtl := Get_Relation_Property(currel, DETAIL_NAME);
IF Get_Block_Property(curdtl, STATUS) <> 'NEW' THEN
Go_Block(curdtl);
Check_Package_Failure;
Error appear here----> Clear_Block(NO_VALIDATE);
IF :System.Block_Status <> 'NEW' THEN
RAISE Form_Trigger_Failure;
END IF;
END IF;
currel := Get_Relation_Property(currel, NEXT_MASTER_RELATION);
END LOOP;
Thx in advance,
Wolfgang

Wolfgang,
To be honest, I've always done this kind of thing in the Pre-Inse rt or Pre-Upda te triggers. Why is it so important for the user to see the value of these field BEFORE the IN SERT or UPDAT E? Once the record is commited, they will see these values in your form. In my experience - users are typically satisfied with this approach. If your users are not OK with this approach, perhaps you could us a When-Validate-Record trigger instead of the When-Create-Record trigger.
I think the When-Create-Record option would still work, but your code will need a little tweak. Give the following a try:
   IF ( NVL(:termin.best_nr,'MSTR') = NVL(:pos.best_nr,'DTL')
        AND NVL(:termin.best_jj,'MSTR') = NVL(:pos.best_jj,'DTL')
        AND NVL(:termin.best_pos,'MSTR') = NVL(:pos.best_pos,'DTL') ) THEN
       <<...set_values..>>
   END IF;Remember, NULL values do not always get evaluated correctly so it is always best to use the NVL function to ensure fields are evaluated correctly.
BTW, you indicated that you ran DEBUG on your trigger, when your IF statement was evaluated did the "set_Values" section of your code run? If it didn't - do you have other code in your WCR trigger that is setting values outside of your IF statement?
Craig...

Select records without deletion marker?

I am trying to load data from the datasource 0INSP_CHAR, but I get a number of errors because I see duplicate records. Most of the records has a deletion-marking, but how do I select the records without deletion marker when I can only set a to- and a from-value? The records I want has no entry in the field so I cannot think of any entry that will select the correct records... Selection A to V and Y to Z does not work...
An other subset of the records differ only on a 'valid from'-field. So I thought I could put the data in an ODS and then select the record with the most recent 'valid from'-date. But I cannot see how to make sure that the newest record overwrite the older one. Is that because the setup I am planning is impossible...?
An other strange thing is that the datasource has five characteristics and two other fields that are not mapped to an info object. I can use them for selection, but I cannot load the data to BW...?
Regards,
Christian Frier

Hi Christian,
normally if you make your attributes time depending in the attribute screen of 0insp_char you should be able to load the data. If you want to get rid of the 'deleted' records, create a start routine in the transfer rules and delete all records from datapak with that flag.
Your second question should also be solved by having everything time dependent.
regards
Siggi

Workaround for changing tempos in a song

Mr. Drosser wrote, about changing tempo in a song:
"You don't need to go to a different program. I did this once for a song with a slow ending, "New York New York" type: Save a copy of the fast portion of your song, lower the tempo in the copy and do everything you want to do, then mix down every track separately (you can do that "by hand" or using the track locking function), import the audio files into your original song. Of course the bar separators don't have meaning any more, but here you go with your slow part. You can still mix the tracks individually, add effects etc. And of course you only have to do that with the tracks that are tempo dependent, i.e. midi tracks and audio loops. You can do things like vocals on the whole song in one run."
"I'm aware this is only a workaround - especially continuous tempo changes are impossible that way. That's why we added variable tempo on the master track to the "wishlist"."
At the time Mr. Drosser made this reply, I did not have time to study what he said. I now think that he says to do the fast part, which is the chorus in my song, and then make a copy of that and change the tempo so that it meets my needs for slowness, then enter the notes and loops for the slow part, and then have GB render this slow part to audio. I would use the track locking function to do this, I think. I then put the audio tracks, Real tracks, into the song, along with the fast stuff. I then sing the words for the whole song, fast and slow, in one wallop and there you are! There I am!
Have I got it right, Mr. Drosser? Please correct me as needed.
Since my fast part, the chorus, is almost the same every time, I would rather like to first do the slow part and then make a copy of that, change the tempo to faster, and proceed. That would work, would it not? Does it really make any difference in efficiency as to which you do first, the slow or the fast?
And, as I said to HangTime, since this is the month of the Great Pumpkin, Gourd bless you!

Yes, I actually do mean export to iTunes, that is the only way to get audio out of GB (well, using GB anyway).
I can think of several ways to attack this, none are particularly pretty, but if I were using loops and such I imagine the steps I'd take would be something along the lines of (and I'm going to make up numbers for more of a concrete example, though these are just out of thin air):
1) Create a song at 140 BPM. Create all my parts that were at 140
2) Create a song at 96 (or duplicate my old one, etc) and create all my slow parts.
3a) I'd use the Cycle function, wrap it around each part in my slow song one at a time and Export to iTunes (I believe you said all the slow parts were the same, so you wouldn't need the Cycle part for this, justr export the single slow part. But if there were variations that's how I'd do it)
3b) I'd find those AIFFs I exported and rename them to something meaningful (Chorus1, Chorus2, Bridge...)
4a) I would do the same thing with all the fast parts (Cycle around each section and export)
4b) Same as 3b for these parts
5) Now what I have on my hard drive (and in iTunes, but this is unimportant) are a series of AIFF files which we can pretend are loops that we want to peice together. If your song was:
Verse1, Chorus1, Verse2, Chorus1, verse3, Bridge, chorus2, verse4, chours1
You'd then drag those parts, into yet a third GB project file, in that order, dropping them into a New Basic track.
6) create another New Basic Track and add your vocals.
Like I said, not pretty, but I can think of an uglier way to do it, so it's not the worst possible method.
hope that made sense.
I will not only keep my hands above the table
Good idea, I jsut opened a project file in which 8 tracks are missing (and they are gone). I'm notamused, and I'm stymied. I was sure I knew all the causes of this. Thankfully this was just a scratch take, AND I had locked all 8 drum tracks, so they still play, but the original recordings no longer exist.
I will smile when I say that.
What the heck... Barkeep, back that man up, and leave the bottle
--HangTime [Will Compute for a wee bit of Jameson] B-)>

How can I find all exclamation marks in my iTunes without clicking on each song? Is there a way to delete all instead of one at a time?

How can I find all exclamation marks in my iTunes without clicking on each song? Can they be deleted all at once instead of one song at a time?

Lost & Found
Create a playlist called Found, select everything in Music and drag it into the Found playlist (it may take some time to count the tracks that are to be dropped). Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist.
Optional: It depends a bit on why things aren't where iTunes expects to find them but if they are in sensible Artist & Album folders in some common location then my FindTracks script should be able to reconnect them to iTunes. FindTracks uses some fuzzy matching routines and searches for multiple potential locations. For more details see this thread. Once you have repaired the tracks that can be found you can drag the contents of the Lost playlist into Found which will update things.
Or, you can simply delete all the tracks in the Lost playlist with Ctrl-A to select them and then Shift-Delete to delete.
tt2

Windows can't create a network map/appearance of B...

Hi
I have had BT infinity for somewhat over a month now without any problems, until yesterday. That I am aware of two things have changed but in what order they changed I do not know.
'Firstly' I connected a brand new but several years old i.e. unused, LG 1T network drive and tried to get through the software installation process without success (can't create acceptable login details ). However I could see etc. the drive if I typed its network address into a browser's address window. BUT at that point the Windows network map started breaking. That was yesterday and I have, for the moment, removed the drive and deleted its info from the Homehub 5b.
Today I noticed that two new wireless networks have appeared, BTWifi-X and BTWifi-with-Fon. These appear and disappear as and when my homehub is switched on and off and, given what I have read, I assume these are the hotspot networks I am providing.
If I have my laptop connected to the homehub via LAN, Windows can create a network map providing no other computer is connected via WAN. Conversely when any computer is simultaneously connected to the homehub via WAN Windows loses the ability to create a network map, this includes the situation where one computer is connected via WAN and LAN. I often use my employer's WAN when at work and frequently forget to switch the WAN off, meaning that when I come home the laptop is initially often connected via WAN and LAN. That I am aware of, Windows has not previously had a problem creating a network map when this has happened.
There does not seem to be a problem if my phone (android) is connected to the homehub via WAN or if I have two computers connected to the homehub via only WAN nor if two computers are connected to the home hub via only LAN
One other thing I have also noticed is that the network map, when created, seems to contain, at times, a switch, a hub, Homehub5 and BThub5**** as if there a multitude of connectors.
I would like to get back the ability for windows to create network maps whatever connections are made.
Any suggestions?
Thanks

Claybourne wrote:
Hi
I have had BT infinity for somewhat over a month now without any problems, until yesterday.
That I am aware of two things have changed but in what order they changed I do not know.
'Firstly' I connected a brand new but several years old i.e. unused, LG 1T network drive and tried to get through the software installation process without success (can't create acceptable login details ). However I could see etc. the drive if I typed its network address into a browser's address window. BUT at that point the Windows network map started breaking. That was yesterday and I have, for the moment, removed the drive and deleted its info from the Homehub 5b.
Today I noticed that two new wireless networks have appeared, BTWifi-X and BTWifi-with-Fon. These appear and disappear as and when my homehub is switched on and off and, given what I have read, I assume these are the hotspot networks I am providing.
If I have my laptop connected to the homehub via LAN, Windows can create a network map providing no other computer is connected via WAN. Conversely when any computer is simultaneously connected to the homehub via WAN Windows loses the ability to create a network map, this includes the situation where one computer is connected via WAN and LAN.
I often use my employer's WAN when at work and frequently forget to switch the WAN off, meaning that when I come home the laptop is initially often connected via WAN and LAN. That I am aware of, Windows has not previously had a problem creating a network map when this has happened.
There does not seem to be a problem if my phone (android) is connected to the homehub via WAN or if I have two computers connected to the homehub via only WAN nor if two computers are connected to the home hub via only LAN
One other thing I have also noticed is that the network map, when created, seems to contain, at times, a switch, a hub, Homehub5 and BThub5**** as if there a multitude of connectors.
I would like to get back the ability for windows to create network maps whatever connections are made.
Any suggestions?
Thanks
You seem to be using WAN to mean a Wireless connection when it means something else. Is this correct.
Your HH 5 B should provide a better network map than windows. Do you know how to log into your Home Hub Manager to get this and other information ?
Have you set up your HH 5 B as recommended in this forum ?

Import map issue one record at a time

Hello Experts,
I built an import map to run it manually with import manager, but when I click on Ready to Import, the import manager is doing one record at a time. I have to go back to the match tab and refresh in order to import the rest.
Any idea where to setup a setting to import all records at once?
Thank you very much for your help,
Claudia Hardeman

Hi Claudia,
Please check if your matching criteria results in fewer records,what is the matching criteria you are setting?
Do you see a total of 300 under "Create" Match Action?
No of records to be imported is governed by Match action which tell the MDS which are distinct records,Match Action tells MDS what is to be done with this number of records which have this Match type.
Please check if you have "SKIP" as match action,if yes use a appropriate action for match type.
Do a "Save Update" of the map.
Please revert with results.
Thanks,
Ravi

No messages created from split mapping error .....

HI XI Friends..
In My XML to RFC scenario,,
i am doing message splitting withput BPM.
in message mapping ..i changed target message occurance to unbounded
and same i did in interface mapping also..
static test is OK..creating multiple target messages in static test.
in interface determination,using enhanced option i given interface mapping.
file is picking but in SXMB_MONI ...i am getting error like this
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>No messages created from split mapping</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No messages created from split mapping</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
please guide me..
regards
ram

Hi Ram,
Check these..
Split mapping created no messages
Message Split without BPM - Error
cheers,
Prashanth
P.S Please mark helpful answers

FRM - 41105 You Cannot query records without a saved parent record

I have 3 data blocks. The contro data block have document type and document number if we come to new record(I have written execute query for both header and detail part) the header block will show the detail of the documnet header(Header Details) and detail block will show the detail part.
But my problem is when new record instance only the header block is querying and detail block is not querying and giving an error message(*FRM - 41105 You Cannot query records without a saved parent record*)!!
Plz help me!!
Thanks in advance,

yea header tables PK is refered in the details table.
and i have master record created already and have the detail record for those master records in the table.
i want to query the detail record related to that master when we select a document number and document code in the control block.
Its querying the master detail relevent to that header and giving this error messge while quering the detail record..

My iTunes says there are 17 songs it cannot locate. How do I locate which songs these are without clicking on each song in my whole library?

My iTunes says there are 17 songs it cannot locate. How do I locate which songs these are without clicking on each song in my whole library?

To locate all of the broken links in your library try:
Lost & Found Playlists
Create a regular playlist called Found, select everything in Music and drag it into the Found playlist (it may take some time to count the tracks that are to be dropped). Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist. They can be deleted with Ctrl+A to select them and then Shift+Delete to discard them.
The exercise can be repeated with different media sources if needed.
Or try iTunes Folder Watch with its option to check for dead tracks on startup.
tt2

Info record without material (EINA-MATKL). Tax code

Good morning
We need to be able to automatically define in the Purchase Order the tax codes when we are purchasing a free text item (without material master record).
We are trying to do it by means of the info record for the vendor and material group, without the material. However the system is not able to determine this value.
Please if you can help us to determine how we can automatically determine this tax code in a purchase order based on the material group, we would appreciate it.
Thank you in advance and best regards,
Alejandra

Hi Steve
Have a query here regarding Info record without material number (using material group).
1) I understand we can create info record wihtout material number using material group . but doest it mean all the material comes under that material group and having same vendor will use single info record?
2) What is Purpose of Sort Key while creating such a info record.
3) As per my understanding for this type of info record system never update the price automatically using info record in fact for such PO we need to enter the info record number manually.? am i right? if yes then what is the purpose of creating a info record with material group if anyways we need to enter the info record manually.
4) i am creating a PO but even after entering the info record number (which i have created for the ,material group and vendor combination) system is asking me to enter the price against PB00.
regrds
Yogesh

Create a Tempo Map to Song recorded without click

Similar Messages

Maybe you are looking for