"Create alternate versions without using extra disk space" Really?

"Create alternate versions without using extra disk space" says Apple. But is that really true? Because, from what I understand, for Aperture's OS Integration (with the Media Browser) to work, Aperture has to render Previews of all your photos first. So, any alternate versions that you create, do exist on your Hard Drive in the form of an actual file (e.g. a JPEG).

Reuben Feffer wrote:
"Create alternate versions without using extra disk space" says Apple. But is that really true? Because, from what I understand, for Aperture's OS Integration (with the Media Browser) to work, Aperture has to render Previews of all your photos first. So, any alternate versions that you create, do exist on your Hard Drive in the form of an actual file (e.g. a JPEG).
As Ian notes, it's smaller than a RAW - also smaller than an alternate PSD you might make, or duplicating a background layer in a PSD.
Also though, you don't have to have previews for everything - I find what I do is leave automatic preview generation turned off and then just generate previews for images that I like the end result of. This lets you explore alternate versions with essentially no addition space used.

Similar Messages

  • Application cannot start because it cannot create needed files. Not enough disk space

    Hi,
        I have adobe director 11.5 and Macromedia MX 2004 versions installed in my machine. The projector created from the MX 2004 version used to work properly even after the 11.5 upgrade. I recently got the error  "Application cannot start because it cannot create needed files. Not enough disk space", whenever I run the projector. Has anyone come across this issue before?
    Thanks,
    Nandhini

    Where is the projector located?  Do you have read/write permissions in that folder?  This is a problem I have seen if I am running a projector on a network share where the projector will not be allowed to save files (temp files etc) in that folder.  Even if you don;t think it needs to save these files, it will come up with this error.  Try copying the file to your local machine and see if it works better.  If you are already running it on your local machine, and in a "safe" location within your user folder, then this is not the answer you are looking for and something else is going wrong.

  • Is it possible to create .ncd file without using MAX?

    Is it possible to create .ncd file without using MAX? I am trying to read the data given by hundreds of possible Arb. IDs on one of the CAN port without having to create it from the MAX.
    Thank you

    Hi,
    the NI-CAN driver software does not provide functions/VIs to generate
    *.ncd files. However the *.ncd file format is just plain XML (ASCII text). Take a
    look at the example.ncd file that gets installed with NI-CAN
    (<ProgramFiles>\National Instruments\NI-CAN\):
    <?xml version="1.0" encoding="UTF-8"?>
    <nican_config version="0.1">
    <saved>8/8/2005,17:58</saved>
    <message name="TransmissionFluids">
      <id extended="0">82</id>
      <dbc>C:\Program Files\National Instruments\NI-CAN\example.ncd</dbc>
      <conflicts>0</conflicts>
      <bytes>6</bytes>
      <interface>1</interface>
      <comment></comment>
      <channel name="ClutchPressure">
        <conflicts>0</conflicts>
        <bitfield start="0" bits="8" order="0" type="1"/>
        <linear_scaling factor="1.600000e+001"
    offset="0.000000e+000" max="4.000000e+003" min="0.000000e+000"
    default="0.000000e+000" unit="kPa"/>
        <comment></comment>
      </channel>
    </message>
    </nican_config>
    Thus, you could generate *.ncd files with simple file I/O. Having XML-specific file I/O functions simplifies this task.
    -B2k

  • LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

    LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

    Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

  • How do you create an array without using a shell on the FP?

    I want to be able to read the status of front panel controls (value, control box selection, etc.) and save it to a file, as a "configuration" file -- then be able to load it and have all the controls set to the same states as were saved in the file. I was thinking an array would be a way to do this, as I have done that in VB. (Saving it as a text file, then reading lines back into the array when the file is read and point the control(s) values/states to the corresponding array element.
    So how do I create an array of X dimensions without using a shell on the front panel? Or can someone suggest a better way to accomplish what I am after? (Datalogging doesn't allow for saving the status by a filename, so I
    do not want to go that route.)

    Thanks so much m3nth! This definitely looks like what I was wanting... just not really knowing how to get there.
    I'm not sure I follow all the icons. Is that an array (top left with 0 constant) in the top example? And if so, that gets back to part of my original question of how to create an array without using a shell on the FP. Do I follow your diagram correctly?
    If I seem a tad green... well I am.
    I hope you understand the LabVIEW environment and icons are still very new to me.
    Also, I had a response from an NI app. engineer about this problem. He sent me a couple of VI's that he threw together approaching this by using Keys. (I still think you are pointing to the best solution.) I assume he wouldn't mind m
    e posting his reply and the VI's for the sake of a good, thorough, Roundtable discussion. So here are his comments with VI's attached:
    "I was implementing this exact functionality this morning for an application I'm working on. I only have five controls I want to save, but they are all of different data types. I simply wrote a key for each control, and read back that key on initialization. I simply passed in property node values to the save VI at the end, and passed the values out to property nodes at
    the beginning. I've attached my initialize and save VI's for you to view. If you have so many controls that this would not be feasible, you may want to look into clustering the controls and saving the cluster as a datalog file.
    Attachments:
    Initialize_Settings.vi ‏55 KB
    Save_Settings.vi ‏52 KB

  • How to create a domain without using the root user in Sunone Server

    Hi,
    I am having one requirement to create a domain without using root user in sunone application server 8.1. Does any body know the solution?
    Message was edited by:
    SPBP

    Hi,
    If you are using file-based installation, you can install as non-root user and create domains as usual. You can use asadmin command available at <AS_INSTALL>/bin to do this.
    ex: ./asadmin create-domain domaindir /tmp/justfortest adminport 4850 --adminuser admin domain_nonroot_test
    Did you face any problem doing this in non-root. Unless you have write permissions in domaindir, you won't be facing any problem.
    Hope this clarifies your question.
    Thanks,
    -Balaji.

  • If I bring in photos from Iphoto, am I using more disk space on my hard drive. I dont want to duplicate my entire file. I have 26000 photos in I photo.

    If I bring in photos from Iphoto, am I using more disk space on my hard drive. I dont want to duplicate my entire file. I have 26000 photos in I photo.

    You have to duplicate the photos unless you want to use PSE as the external editor for iphoto. In iphoto, your photos are stored in a proprietary library, which should never be messed with by programs other than iphoto. Writing to the iphoto library from outside iphoto is the fastest way to corrupt it and lose all the pics it contains.
    So you can either set PSE as your external editor and send the photos from within iphoto, or you must export the photos from iphoto to be able to use them outside that program.

  • Creating itune account without using credit card

    Hi.
    I m new apple user has a little question.
    Can i create Itune account without credit card.? if it is possible then tell me the process of creating itune account without using credit card. 
    Warm Regards,
    Chandan Sharma

    I follow the provided link but payment method does not show option "non" i am very frustate.
    please help me because i do't have a credit card.

  • Can I install CS5 student teacher edition without using the disk on my 2nd computer as I do not have a disk drive

    I have CS5 student and teacher edition. I have a CD. I want to install it onto my mac book pro (2nd computer), can I do this without using the disk.

    Thanks very much, well I'm still struggling.
    The link kind of worked [took a couple of hours ] but then I wasn't able to fully install it, it said it was partially installed and I didn't know where to go from there. A red disk appeared on my desk top, I clicked it and another window appeared but then I couldn't do anything with it. It said I had to access the download manager but I don't know what a download manager is, it certainly isn't where my documents download to.
    My original CD is for student teacher edition which I still fall under, I have a serial number for that edition.
    If you are able to shed any further light on this I would be very grateful.

  • Does filevault use more disk space?

    Does filevault use more disk space than when not using it?  I'm running an SSD drive and need to keep usage to a minimum.  Thx

    The difference is about 200 MB, regardless of the size of the volume.

  • Is therere an option to create apple id without using a credit card?

    is therere an option to create apple id without using a credit card?

    http://support.apple.com/kb/HT2534

  • Does increasing Exchange Storgage Quota use more disk space immediately?

    Exchange does not use the space immediately, it just allows each mailbox to grow up to that size.
    I would consider carefully before increasing the quota limit. One of the reasons for having a quota is to keep mailboxes to a manageable size. Every GB of size costs a heck of a lot more than just the GB on the spindle.

    Hi
    The current policy is a 20Gb limit. Thanks to a post I made in this forum, I know that 21 of the users are nearing this limit.
    Now I can increase the limit for those 21. Or I can change the policy to 25Gb for everyone. If I increase it to 25Gb for everyone, does Exchange use the disk space immediately? Lets say I had 1000 Gb free, and 150 users. Does increasing by 5Gb mean that 5x150 = 750Gb is now allocated? Or does exchange use the disk space as required?
    Thanks
    This topic first appeared in the Spiceworks Community

  • Can i create apple id without use the credit card?

    can i create apple id without use the credit card?

    I'm getting the same thing. I created a new Apple ID via the Internet (appleid.apple.com) When I go to my device to try to use it, I have to review it first and in that process, I'm asked for a credit card or iTunes gift card. There is NO 'none' option.
    I work in a school district and we'd like employees to use their own apple ID for free apps which will allow them the freedom to explore apps without weighing down our tech dept with myriad requests for random apps. I deal with a broad demographic and many users are suspicious of putting personal credit card info on an Internet-based account.
    However, it appears they are locked out of the store unless they have some form of payment on file. Even if they enter a gift card, what happens when it's used up? Will they get locked out of the store if they don't have a balance?
    Anyone have a work around? If not ... APPLE Please update your support materials to explain this, or fix the bug.
    Thanks!

  • HT2589 how can i create apple id without using credit card details ?

    how can i create apple id without using credit card details ?

    @Limnos - that doesn't work anymore. There is no NONE option. I've been at it for hours trying to set up my daughter's account. I've tried creating and verifying an appleID on the web, on her touch...everything. Every single time you get to the stupid Touch, it wants to walk you through the verification of the account and it demands payment (even for their suggested apple Remote method listed in the KB).

  • Adobe Bridge CS5, error when creating contact sheet "There is insufficient disk space..."

    I am running Bridge CS5 for the first time and I receive this error when attempting to create a contact sheet. "There is insufficient disk space to complete this operation." The image files I am using are web optimized and very small. The error even occurs when attempting one small image. I have gone back to using Bridge CS4 and it works just fine. Any help?
    Thanks!

    I think I narrowed this down to having a network volume mounted with a share name of "Users".  The strange thing is even you if unmount the volume you will still have problems.  However, if you avoid mounting the volume entirely (from boot) it will be OK.
    The solution, it appears, is to rename the sharepoint to something other than "Users".  This worked for us.  I'm not sure if it matters whether the server is Windows or Mac OS.  In our case the sharepoint was an AFP volume on Mac OS.
    We had other errors related to Bridge such as "unable to create folder" and the path in the message appeared to be /Users/currentUser/.....  which made no sense at all.  However, if Bridge was internally trying to use /Volumes/Users (the mounted sharepoint), it would not only not find "currentUser", but it would not have permissions to create that folder either.
    So, another possible solution could be to grant file creation rights on the network volume "Users".  Another not-so-great idea.
    Hope that helps someone else!

Maybe you are looking for