Create and reference anchor

Hello,
Can someone please tell me how create an anchor on a page item (display as text(does not save state)) and have a list on the same page reference it.
I'm doing this because I have a lot of items on this page, it got pretty long and it needs some in-page navigation.
Thank you very much,

Thank you very much for your reply
<<Well, you could add the anchor tag onto an existing template that you use, like the display as text item. Then each display as text item will have its own anchor.>>
I don't necessarily want an anchor for each text item.
<<Or you could try creating a custom template of say, a button, and modifying it to be an anchor tag.>>
Can you please tell me how can I modify that template?
And is it really impossible to just make one item an anchor without getting into this template stuff? If it is, can someone please tell me how it can be done?
Thank you all very much,

Similar Messages

Dynamically Create (and reference) Dialog Window Groups

I'm trying to setup a dialog window that can be easily added to via a CSV file. The only problem I've run into is; I'm not quite sure how to create the groups dynamically. Basically, the script setups up a bunch of texture features and then gives the option to save and/or strip that feature. Below is the basic idea of what I'm trying to do, but the groups are not able to be created in the way that they are shown:
featArray = [];
featArray[0] = new Array("Feature Display Name","feature sub-group",'texture',"feature action",'feature type');
featArray[1] = new Array("Feature2 Display Name","feature2 sub-group",'texture',"feature2 action",'feature2 type'); //etc.
for(var z in featArray) {
    if(featArray[z][2] == 'texture') {
        w.p1.sp1.add('statictext',undefined,featArray[z][0]);
        w.p1.sp1.g[z] = w.p1.sp1.add('group');
        w.p1.sp1.g[z].orientation = 'row';
        w.p1.sp1.g[z].add('checkbox',undefined,'Save');
        w.p1.sp1.g[z].add('checkbox',undefined,'Strip');
        w.p1.sp1.g[z].children[0].id = featArray[z][0].toLowerCase() + "-save";
        w.p1.sp1.g[z].children[1].id = featArray[z][0].toLowerCase() + "-strip";
If you change the g[z] to g1, it will create each field correctly (visually), but there is no way to properly reference the check boxes to see which are checked. Any ideas how, or even if, it is possible to dynamically create a different group for each line of the featArray? And if so, how to then reference the check boxes in those groups later on? Thanks in advance for any help!

You just use the array ie:
featArray = [];
featArray[0] = new Array("Feature Display Name","feature sub-group",'texture','feature group','feature type');
featArray[1] = new Array("Feature Display Name2","feature sub-group2",'texture','feature group2','feature type2'); //etc.
var w = new Window('dialog','test');
w.p1= w.add("panel", undefined, undefined, {borderStyle:"black"});
var x = new Array();
var count =0;
for(var z in featArray) {
    if(featArray[z][2] == 'texture') {
        w.p1.add('statictext',undefined,featArray[z][0]);
w.p1.g = w.p1.add('group');
w.p1.g.orientation = 'row';
x[count] = w.p1.g.add('checkbox',undefined,'Save');
count++;
x[count] = w.p1.g.add('checkbox',undefined,'Strip');
count++
x[0].onClick=function(){
    alert("Checkbox 0 clicked");
x[1].onClick=function(){
    alert("Checkbox 1 clicked");
x[2].onClick=function(){
    alert("Checkbox 2 clicked");
x[3].onClick=function(){
    alert("Checkbox 3 clicked");
w.test = w.add('button',undefined,'Press to Test');
w.add('button',undefined,'Cancel');
w.test.onClick=function(){
for(var w =0;w<x.length;w++){
    alert("Checkbox " + w + " value = " +x[w].value);
w.center();
w.show();

I created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

i created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

Expanding and clarifying what BJD said;
After you create the temporary sub-VI that BJD mentioned, open its front panel and copy the reference control that LV created when it created the sub-VI.
This reference control will be correct class etc that you need. Use the control to replace the original control that you were attempting to wire up.
The technique of "create sub-VI...copy" always works for me.
There is one more thing that you should watch out for.
The mechanical action of the boolean can not be set for latch action when attempting to read the value using a value property node.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Creating and updating cross-references in a book

Hello everybody,
I created a book of several files. Now I would like to create and update cross-references from one chapter to another. What do I have to do? (I use Framemaker 8).
Thank you for your help.
Bye
Vreni

For creating cross-references between chapters, open the chapter documents and insert cross-references as is done for any normal document using menu command "Special->Cross-Reference".
For updating all cross-references throughout the book, you can use the menu command "Edit->Update Book".
Regards,
Tarun Garg
Adobe Certified Expert, FrameMaker
http://blogs.adobe.com/techcomm/framemaker/

How can I add content from a different spreadsheet and thus create a reference between then?

Hello,
I am starting to use Numbers 3.5 in a MacBook Pro Late 2011.
I am trying to find a way to create a reference between spreadsheets.
For instance, I have a spreadsheet for each year to control things at home.
While creating a 2015 version, I can't find a way to make formulas using values from 2014 spreadsheet and make then referenced.
Does anyone know if it is possible and how can I do that?
An observation: using excel I can do that with
'Macintosh HD:Users:gabriel:Documents:Pessoal:2013:[Home 2013.xlsx]Janeiro'!$D$374'
Thank you!!
Gabriel

Hi Gabriel,
I suppose you could cut and paste formula results to a tab in our new spreadsheet document if the vlues you want are contained there. There are some people who have written scripts to import data from different docs. But no, Numbers does not support links between docs.
quinn

Find debit and credit memos created without reference

Hi Experts
Could you please tell the easy way to find out credit memos and debit memos created without reference to oringinal order.
Regards,
Santosh

hello, friend.
try a query using table VBFA. specify the document category in both preceding (sales invoice) and subsequent documents (debit/credit memos).
this should help you.
regards.
p.s.
in this particular case, in VBFA only credit/debit memos with reference to invoices will be displayed. this can be compared to VA05.
Edited by: jonathan y on Mar 27, 2009 1:22 PM

Is there an easier way to create and cluster large numbers of references than doing it one at a time?

Hey, I have an instrument for which there are a large number of controls on a panel. I want to have the controls reflect the state of the instrument at the time the panel opens. I was planning on creating a sub-vi, then clustering a reference to each of the controls, then having the sub-vi set each value.
The question is, is there a way to highlight say... 12 controls, make a reference, and cluster them all together without the tedious process of creating 12 references, then wiring 12 of them into a cluster?
Or perhaps I should be using something other than clusters entirely?
Thanks,
-Josh

Writing values from control references is slow. Do not use it in high performance applications. Having said that, it sounds like you just want to do it once for initialization purposes, which is OK.
The answer is don't wire in a ton of clustered references. Just wire the a reference to the VI on which the controls live. You can get an array of references to all the front panel controls given the reference to the owning VI. You will need to "downcast" (to more specific type) for each particular data type, but that can be done inside the subVI. Note that the order of the reference array is the tabbing order of the controls on the front panel.
Dan Press
www.primetest.com

High level contract and orders created with reference

Dear All,
The client is an integrated flat steel manufacturer. They have entered into quantity contract with high level products like for example Hot rolled coils + Cold rolled coils + Heat Treated plates 5000 T per month. There is no clear cut quantity breakup of each product. On monthly basis customer releases purchase orders with exact grade and dimensions. The requirement is to capture contact for 5000T and create orders with reference to the contract with necessary completion rule. Since exact break up of the high level products is not known controlling of order quantity to 5000T will involve lot of manual intervention. I was thinking in the contract we have high level material "X with 5000T and orders created with reference with actual materials like Hot rolled coils, Cold rolled coils and exact dimension/grade mentioned. Is this possible to have different materials in contract and order with enhancement?
Any other idea of fulfilling the requirements is welcome.
Thanks,

Hi Ramesh,
Go through EKPO there is a Table BANFN it will update when you create a PO with reference to PR
Do se11 > Table EKPO> CtrlShiftF10 > Assign any of PO no. in the EBELN > Execute > you will find BANFN table
it indicates Purchase Requisition Number. it will update when you create PO with reference to PR.
Regards,
Vraj

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

Creating Cross-References in an InDesign Tags file

I am tyring to create cross-refs to images in a tagged text file. Typically this will be used to create references like "See our display ad on Page n". I have studied the tags documentation and I can see how to create the cross-reference tag but I can't see how to link the tag to the appropriate image. If I create a test document, insert a couple of pictures, and add cross-references to those pictures, when I export the text to a tagged text file it refers to the pictures as, for example, "<HyperlinkDest:Anchor>" and "<HyperlinkDest:Anchor 2>". But I can't see how to specify exactly which image "<HyperlinkDest:Anchor>" refers to - there doesn't appear to be an "anchor" tag around the picture tp identify it.
So how does this work?
TIA
Pat

Hi Pat,
BEfore exporting the tagged text.
1. You have to create the Intereactive->New Hyperlink Destination [Figure 1.1].
2. Create a Intereactive->New Hyperlink [See Figure 1.1] in this select the dest as [Figure 1.1]
3. Then export as tagged text.
Regards,
Ramkumar .P

Error while creating Cross-reference table using Xreftool (PIP Ins)

Error while running xref.sh script unable to create cross reference table.
**Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool**
Could not find xref directory within tip folder (/OracleAS_1/bpel/docs/workflow/oracle/tip)
searched for similar issue in OTN it says issue fixed by upgrading Oracle AS, we are using 10.1.3.4 MLR#8
http://kr.forums.oracle.com/forums/thread.jspa?threadID=835446
steps followed.
Creating Cross-Reference Tables
Complete the following procedure to create cross-reference tables.
To create cross-reference tables
1 Navigate to the following directory:
%SOAHOME%/SiebelODOPPIP/scripts/
2 Open the following file for editing:
xref.sh
3 Set the userid and passwd for logging into BPEL console on the appropriate lines.
4 Set the correct SOA_HOME location on the appropriate line.
5 Save and close the file.
6 Make the file executeable:
chmod +x xref.sh
dos2unix xref.sh
7 Change directory (cd) to integration/esb/bin under %SOAHOME%.
8 Execute ../../../SiebelODOPPIP/scripts/xref.sh.
I am using SOA suite 10.1.3.3 and getting same error
Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool

Hi Abhijeet,
please check in transaction FI01, about your data consistencies. You can use this wiki help in terms of Address, it it found any useful facts for you
Address Checks - Business Address Services (BC-SRV-ADR) - SAP Library

Error while posting a sales order created with reference from contract for

Hi,
I am posting a sales document( Type: WA) created with reference from contract document( type wk2) for delivery. The item category in the sales order of the Item is WAN. On posting this document for delivery I am getting the error as "Item category WAN is not defined". Please help me out how to resolve this issue.
Thanks
Jayant

Hi Jayant,
I think its value contract releated error,
You suppose to check material item category group through T.code-MM02 into sales2 tab and maintain VCIT,
and do item category assignment through T.code- VOV4.
plz.maintain like that,
WK2 -          -VCIT-         -           - WAN(contract item category),
wk2 -          -        -VCTR-          - WAN((contract item category),
you should also maintain same against your standard Sales Document type and for Standard Item category into VOV4,
WA(standard docu.type) -VCIT-                             -                -TAN(your standard docu.type item category),
WA(standard docu.type) -         -VCTR(item usage)-              -TAN(your standard docu.type item category),

What's the best way to create and free temporaries for CLOB parameters?

Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production on Solaris
I have a procedure calling another procedure with one of the parameters being an IN OUT NOCOPY CLOB.
I create the temporary CLOB in proc_A, do the call to proc_B and then free the temporary again.
In proc_B I create a REFCURSOR, and use that with dbms_xmlgen to create XML.
So the code basically looks like
CREATE OR REPLACE PROCEDURE client_xml( p_client_id IN            NUMBER
                                       ,p_clob      IN OUT NOCOPY CLOB   ) AS
   v_rc         SYS_REFCURSOR;
   v_queryCtx   dbms_xmlquery.ctxType;
BEGIN
   OPEN c_rc FOR
      SELECT col1
            ,col2
            ,col3
        FROM clients
       WHERE client_id = p_client_id;
   v_queryCtx := dbms_xmlgen.newContext(v_rc);
   p_clob     := dbms_xmlgen.getXML(v_queryCtx, 0);
END;
CREATE OR REPLACE PROCEDURE my_proc AS
   v_clob       CLOB;
   v_client_id NUMBER;
BEGIN
   v_client_id := 123456;
   dbms_lob.createTemporary(v_clob, TRUE, dbms_lob.CALL);
   client_xml( p_client_id => v_client_id
              ,p_clob      => v_clob);
   dbms_lob.freeTemporary(v_clob);
END;However, I just learned the hard way that IN OUT NOCOPY is only a hint, and that Oracle sometimes creates a local variable for the CLOB anyway.
A solution is to change the client_xml procedure above to
CREATE OR REPLACE PROCEDURE client_xml( p_client_id IN            NUMBER
                                       ,p_clob      IN OUT NOCOPY CLOB   ) AS
   v_rc         SYS_REFCURSOR;
   v_queryCtx   dbms_xmlquery.ctxType;
BEGIN
   IF NOT NVL(dbms_lob.istemporary(p_clob),0) = 1 THEN
      dbms_lob.createTemporary(p_clob, TRUE, dbms_lob.CALL);
   END IF;
   OPEN c_rc FOR
      SELECT col1
            ,col2
            ,col3
        FROM clients
       WHERE client_id = p_client_id;
   v_queryCtx := dbms_xmlgen.newContext(p_refcursor);
   p_clob     := dbms_xmlgen.getXML(v_queryCtx, 0);
END;My concern is that in case Oracle does create a local variable, 2 temporaries will be created, but there will only be 1 freeTemporary.
Could this lead to a memory leak?
Or should I be safe with the solution above because I'm using dbms_lob.CALL?
Thanks,
Arnold
Edited by: Arnold vK on Jan 24, 2012 11:52 AM

Arnold vK wrote:
However, I just learned the hard way that IN OUT NOCOPY is only a hint, and that Oracle sometimes creates a local variable for the CLOB anyway.A CLOB variable in called a locator. Just another term for a pointer.
A CLOB does not exist in local stack space. The variable itself can be TBs in size (max CLOB size is 128TB depending on DB config) - and impossible to create and maintain in the stack. Thus it does not exist in the stack - and is why the PL/SQL CLOB variable is called a locator as it only contains the pointer/address of the CLOB.
The CLOB itself exists in the database's temporary tablespace - and temporary LOB resource footprint in the database can be viewed via the v$temporary_lobs virtual performance view.
Passing a CLOB pointer by reference (pointer to a pointer) does not make any sense (as would be the case if the NOCOPY clause was honoured by PL/SQL for a CLOB parameter). It is passed by value instead.
So when you call a procedure and pass it a CLOB locator, that procedure will be dereferencing that pointer (via DBMS_LOB for example) in order to access its contents.
Quote from Oracle® Database SecureFiles and Large Objects Developer's Guide
>
A LOB instance has a locator and a value. The LOB locator is a reference to where the LOB value is physically stored. The LOB value is the data stored in the LOB.
When you use a LOB in an operation such as passing a LOB as a parameter, you are actually passing a LOB locator. For the most part, you can work with a LOB instance in your application without being concerned with the semantics of LOB locators. There is no requirement to dereference LOB locators, as is required with pointers in some programming languages.
>
The thing to guard against is not freeing CLOBs - the age old issue of not freeing pointers and releasing malloc'ed memory when done. In PL/SQL, there is fairly tight resource protection with the PL/SQL engine automatically releasing local resources when those go out of scope. But a CLOB (like a ref cursor) is not really a local resource. And as in most other programming language, the explicit release/freeing of such a resource is recommended.

How to use a single page for create and update mode.

Hi,
I need to develop a single page to be used for both create and update modes.
I am going to use a variable MODE
and i will set this in the emp summary page.
Based on the button clicked by the user i have to render the JSF page.
For tis if the user selects a perticular and cliks on update thn i will pass the empno to the next.
so there in the next i will appy a ViewCreiteria on my View Obj to fetch only that row so that only that emp will be displayed ion update mode.
This is working fione for me.
So now the issue is
when the user clicks on CreatEmp button.
i need to enable my VO for insert operations.
for this i wrote the code like this in the beforePhase event
FacesContext ctx = FacesContext.getCurrentInstance();
ValueBinding valBinding = ctx.getApplication().createValueBinding("#{data}");
BindingContext bContext = (BindingContext) valBinding.getValue(ctx);
DCDataControl dcControl = bContext.findDataControl("DataControl");
Application app = ctx.getApplication();
ApplicationModule am = (ApplicationModule) dcControl.getDataProvider();
System.out.println("After Appmodule initiation");
// get the VO reference and initiate the query
System.out.println("Before Page VO initiation");
PrismDmPageSectionViewImpl vo = (ViewImpl)am.findViewObject("View");
//ViewRowImpl row = (ViewRowImpl) vo.createRow();
/* TO CREATE AN EMPTY ROW*/
Row row=vo.createRow();
System.out.println("New Row is created");
//vo.createKey(row);
vo.insertRow(row);
vo.setCurrentRow(row);
By doing this a new empty page is rendered.
But when i fill up the values and click on ok.. i am getting the error like this..
JBO-27023: Failed to validate all rows in a transaction.
JBO-27027: Missing mandatory attributes for a row with key null of type View3
JBO-27014: Attribute Id in View3 is required
JBO-27014: Attribute PageeId in View3 is required
Please point me out where i am missing.
Thanks

Hi,
In my opinion you are over complicating things.
This is what I do for using the sme page as both create and update without all this code.
1) Create a browse page containing a an adf table with a select one component bound to your view object.
2) Create an additional edit page containing only an edit form containing fields of your view object that your users must enter in order to add or edit rows.
3) Link the pages in the JSF diagram with an "edit" navigation case from browse to edit page and a "return" navigation case from edit to browse (make sure that redirect option is NOT set on both cases)
4) Remove the submit button from the edit page and add two application module bindings for the commit and rollback operations as command buttons in the form footer facet. Make sure that both buttons has an action of return and that their disabled property is set to false. You will probably change their labels to ok and cancel respectively.
5) Drop a create action for your view object from the data control palette inside your page as a command button and set the action property to edit also.
3) Set the action property of the view button to edit
This should basically work without any code from your part. -- at least it does so for me -- if you like to make it a bit more funcy you may add am action listener inside your buttons and set a requeScope variable for example #{requestScope.editing} to true or false depending on the button clicked. Then add a title to your page with a value like #{requestScope.editing == true ? 'Editing record' : 'Adding a new record'}..
Hope that helps.
Thanassis

BAPI to create and update scheduling agreement (type LZM) in ECC

Hi,
We have a requirement to create and update scheduling agreement of type LZM in ECC from an external system.
Is there a BAPI available for this in ECC 6.0 which can be used?
The integration is using PI.
Regards,
Srivatsan

Hello,
Please use the T-code "SE93" and then click on Display option after entering the T-code. After entering into the detail screen of the T-code, you shall find option to click on OBJECT LIST and then enter into the Function Group. Now enter the T-code and then click on function module and a list of function module will be displayed in referrence to the T-code.
For your easy reference i have also mentioned the flow.
SE93 --> Use tcode (eg. VA01) > display> Object list ---> Function Groups --> Tcode ---> Function module.
Regards,
Sarthak

Create and reference anchor

Similar Messages

Maybe you are looking for