Create Bitnami Stack Image with Reserved Public virtual IP (VIP)

Hello,
I am would like create a Bitnami Wordpress Stack VM but want to make sure Reserved Public virtual IP (VIP) never changes.
If possible can the Reserved Public virtual IP (VIP) be used only for that VM and particular cloud services.? I want to be able to access the wordpress website hosted on the VM and the VM itself directly using the Reserved Public virtual IP (VIP).
Best Regards,
AbbyDoc

Hi AbbyDoc,
It would be better to create a new cloud service when creating a new VM. Please make sure that the location of the new cloud service must be in the same region as the Reserved IP. You can use the command as below:
New-AzureVMConfig -Name "xxx" -InstanceSize “xxx” –ImageName “xxx”| Add-AzureProvisioningConfig -Windows -AdminUsername “xxxcloudadmin” -Password “xxx”| New-AzureVM -ServiceName "xxx" –ReservedIPName “MyReservedIP” -Location "xxx"
It depends on you. When you create another VM, you can select the existing cloud service or create a new cloud service in the same region.
If you create another VM in the Azure management portal, you can select "Create a new cloud service" and then type the Cloud Service DNS name and select the region/virtual network/affinity group you want to configure to create it
in a new cloud service. Or you can select the existing cloud service you have created in the wizard to create the new VM into an existing cloud service.
If you create it via PowerShell cmdlet, you can refer to the link below to see the differences between creating a new Azure VM into an existing cloud service or a new cloud service by using New-AzureVM:
https://msdn.microsoft.com/en-us/library/azure/dn495254.aspx
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

What is the proper way to create a monotone image with real looking contrast?

Once I apply a color to my previously created black and white image everything looks washed out.
I have an artwork with 3D representation of the letterforms, casting shadows on the textured surface. Shadows are deep black. I need this artwork to be colored in gold. My client forwarded me the specs for the metallic gold which he got from the PANTONE. They are:Gold (871); Adobe 1998 RGB: 126-113-76
HSB*: 44 degrees-40%-50%
What is the proper way of applying those values to the desired image.
My idea was to make the image black and white and than create a monotone image with the above specs. In this case the image gets washed out as the darkest black in the shadows becomes this Pantone gold. Is there any other way?

A duotone will work, however you are going to want to work closely with your printer . Most printers will want the second color in CMYK (Possibly C60 M40 Y0 K100 instead of RGB values or specify a Pantone Rich Black (I personally like 6C)but it will cost you more for the wash up of both heads of the printer...
Go to Image>Mode>Duotone (image must be greyscale first for this to work) then add the desired colors to your ink scales.

Can I create a rotating image with sevaral images in Photoshop?

I was wondering if I can create a rotating image with sevaral images in Photoshop? Much like a gif? Would this improve my page load time or would it be the same as loading a slideshow? Here is an example of what we wanna do vacationsalabama

Yes you can create a gif in PS to do this but it would be much easier to accomplish with some simple JQuery Image slider.
Several examples here
and here
The benefit is they load faster, have speed options, and switching images out is a breeze. They can also have links asigned to the images as they appear.

Lenovo S300: will I have trouble creating a backup image with Acronis

I'm thinking of buying a Lenovo S300
Very cheap and lighweight
I want to update all settings (Windows mainly) and then create a backup image that I can always go back to
Can I do this? Will I have any problems?
I bought an ASUS laptop with no disc drive... and basically, there was no way I could boot up with an external DVD drive or USB
I just wanted to make sure before I purchased
Thanks
Omar

Hi
Which application do you use to create the image?
I use the Symantec ghost and Im very satisfied. I have created an image file which was placed at the second application and if something going wrong Im able to install the OS from the image file.
Furthermore this unit support RAID and the RAID driver must be installed to recognize the HDD.

Unable to create restore disk image with Disk Utility

I've tried three times in order to create a restore image of the users' volume of my Powerbook. I followed exactly the procedure explained typing "man asr" in a terminal window. I booted the Powerbook in target disk mode while connected to my iMac G5 from which Disk utility was run. Every time the disk image creation failed with a log report like this:
Creating Image HOME_HD.dmg
Initializing...
Copying...
/Volumes/HOME_HD: Authentication error
Initializing...
Finishing...
Initializing...
Creating...
Copying...
could not access /Volumes/HOME_HD/./Users/delos/Music/iTunes/iTunes Music/David Bowie/The Best Of David Bowie 1974-1979/01 Sound And Vision.m4a - Input/output error
Finishing...
Unable to create HOME_HD - Input/output error.
I don't know how my imported music could create such a problem to Disk utility, nevertheless I removed the incriminated song from the Music library but another one raised to be not accessible. Then I booted the powerbook from the supplied Tiger DVD too, and I got an error over the music file, something about an allocation that was 190 instead of 1, I got the volume repaired from Disk utility but the Disk image creation failed again without any hint because booting from DVD does not allow to save log file anywhere. Why on Earth I can't manage such a critical task as back up under Tiger while using Panther everything worked like a charm following the same procedure? Is anyone experiencing something similar?
Greetings
Gianmarco

Hi Lee, thank you for your answer, indeed I've just read carefully your article few hours ago, while I googled the net to find some hints on my issue. I think that I've followed exactly the right procedure to make the back up image, and can't find what is wrong. Actually Disk utility Repair disk successfully repaired the allocation bit (whatever that means) of the music files but that wasn't enough to let the creation of the disk image. Quite odd that the music files where recognized as messed up by Disk utility only booting from Tiger DVD and not while the Powerbook was connected to an iMac running Tiger too.
I'll do further investigation during weekend.
Greetings
Gianmarco

How to I create a screenshot image with a Mac?

Hi,
I'm relatively new to Macs. I have yet to learn now to make a screenshot image with a Mac. There doesn't seem to be a Print screen button. How do I do this? Can it be done in the Mac OS? Or, is there a need to install some software to do this?
Thanks much!

It's all built in!
Go to the Help menu in Finder and enter 'Screenshot' and press enter.
Lots of articles there, including this one:
To take a picture of the whole screen, press Command-Shift-3.
To take a picture of part of the screen, press Command-Shift-4, then drag to select the area you want in the picture.
To take a picture of a window, the menu bar, the Dock, or other area, press Command-Shift-4, then press the Space bar. Move the pointer over the area you want so that it's highlighted, then click. If you decide you want to drag to select the area, press the Space bar again.
If you press Command-Shift-4 and decide you don't want to take the screen shot, press the Escape key.
Screen shots are saved as files on the desktop. If you want to put the screen shot in the Clipboard, rather than create a file, hold down the Control key when you press the other keys. You can then paste the picture into a document.
You can also take pictures of the screen using the Grab application (in the Utilities folder).
Some applications, such as DVD Player, may not let you take pictures of the screen

MDT : creating windows 7x64 images with required applications and deploying it

Hi,
We have to create windows 7 x64 and windows 8 images with all the custom applications and which can also be used on all the hardwares. I heard MDT can be used. How can I do this and what are the pre-requisites for installion and steps for configuring MDT
tool ?
do we need ADK for installing MDT ? I tried installing ADK ,but it says you need have ADK documentation_x86_en_us.msi.
Thanks.

For drivers, I have always used the .inf files.
For applications, it depends upon how you want to deploy them. Lots of people build their 'gold' image to contain all the applications they want installed, and then use that as a basis for deployment. Others build special scripts in to select
specific applications based on security groups.
The thing about MDT is that it is very flexible and can be adapted to a lot of different situations. You first need to define exactly how you plan to use it and then build your image(s) accordingly.
The guides you can find online will assist you in the specific steps for the solution option you chose. There is not a single, simple answer to cover all cases.
.:|:.:|:. tim

Error creating a netboot image with System Image Utility

Hi all !
I am trying to create a NetBoot image from my Panther CD, to boot an old iBook.
I am using System Image Utility version 10.4.11.
I can create a NetInstall image, but when I create a NetBoot image SIU give me an error.
I looked in the logs and I can see the error is generated by the script Applications/Server/System Image Utility.app/Contents/Resources/.preinstall
This command is the culprit:
/usr/sbin/installer -verbose -lang 'eng' -pkg '/Volumes/Mac OS X Install Disc 1/System/Installation/Packages/OSInstall.mpkg' -target /Library/NetBoot/NetBootSP0/PantBoot3.nbi/mnt -_multiDiscPath /tmp/siuInstallExtras
The error is (as seen in the logs):
This package requires authentication to install.
If I take the command and run it in the terminal using sudo it goes thru, but gives another error:
installer: Cannot install on volume /Library/NetBoot/NetBootSP0/PantBoot3.nbi/mnt because it is disabled.
installer: Mac OS X cannot start up from this volume.
Is this thing supposed to work ?? It seems to me SIU is buggy.
Any help would be much appreciated.
Regards
Mike

I'm not digging the new SIU at all yet. Maybe I'll get used to it in time. I couldn't get it to accept a Tiger 10.4.6 Install disc the other day to build a NetInstall. Don't know if I was doing something wrong or if it was instinctively rejecting it because I was doing something unsupported.
I miss NetRestore. I think Mike wants use to use Automator... but I want NetRestore's automated Multicast ASR and Windows image restore. It would take a lot of work to match Mike's shrink-wrapped solution.
Speaking of NetRestore, its creator Mike Bombich advises against use CCC for mass deployment. This may include what you're doing. It's really a backup tool, but unfortunately a lot of people got into the habit of using it for creating deployment images and these often have problems. It's the best tool for create images that you will deploy onto multiple Macs.

Create encrypted disk image with OS install disk utility.

I thought to make a full backup of Macintosh HD, and followed instructions in /kb/ht1553. However, every time I tried to creae an encrypted disk image, it barfed with "Failed - User interaction required". I assume it needed the encryption password, but for some reason was unable to display a prompt for this. Anyone know how to fix this? Thanks, Stephen.

Create an encrypted sparse disk image instead of from folder, mount it, and then drag & drop your files into ii.

Can I create a system image with System Image Utility and then transfer the image folder to another server?

I am currently in the process of creating several images to restore for classroom purposes. I am wondering if it is possible to use the System Image Utility on a computer which has Server Admin Tools installed, then transfer that image folder directly to the "NetBoot" folder on our current Apple Netboot Server. Has anyone tried this and/or succeeded? I'd like to get some feedback before attempting it myself on our college's netboot server. Thanks!

We've run into a few problems concerning this process. When we create the image on a seperate machine from the server using SIU and then place it in the NetBoot folder, not every .nbi folder created works properly. We're running into errors that say "Could not find any scan information. The source needs to be imagescanned before it can be restored". This does not happen with every image, but it does happen with computers which have a lot of programs installed on them. Is there a way to imagescan the .nbi folder and/or resolve this issue without going through the process of making a completely new NetRestore image?

Trying To Create Encrypted Disk Images With Disk Utility.

I am trying to create encrypted read and write Disk Images of around 2 GB to 6 GB with Disk Utility.
More often than not the dmg is NOT encrypted.
It seems very hit and miss . . . . most of the time missing!
Is this process notoriously unreliable or am I likely to be doing something wrong?

I think you have cracked it Niel!
I made another, unchecking the Keychain box, and it worked perfectly.
I have been using a password which is used for other items.
Now the .dmg has been created can I check the Keychain box and if so what are the benefits?
I have never understood what the Keychain does.

Fail to create a VD Collection with error "The Virtual desktop template does not meet the provisioning requirements."

I get the following error when I try to create a Virtual desktop
collection;
"The Virtual desktop template does not meet the provisioning requirements."
although I'm specifing a sysprep'd VM installed WS2012 for a virtual desktop template.
Is there any way to resolve?
Or, is there any couses of this message?
thanks.

I realize this is an old thread. I'll post and see if I get a response. If not, I'll create a new thread. My question is how does Microsoft suggest SPLA partners create VDI pools since they cannot license Windows 7 or 8 via SPLA? Why
would you restrict the provisioning to only the desktop operating systems that you won't allow partners to license for deployment?
Are there any plans to change this to include 2008 R2 or WS2012 as the base OS for a VD template?
Rob

SHOULD WE CREATE A DISK IMAGE WITH NEW IMACS?

Doesn't this take a snap shot of your mac in case something later gets screwed up?

the best way to back up your mac is to use time machine. You need an external hard drive or time capsule to back up to. The external drive should be larger then the built in drive.
http://docs.info.apple.com/article.html?path=Mac/10.5/en/11421.html

Creating Windows 8.1 master image with MDT 2013,cannot capture .WIM

I am having an issue with creating a master image with Windows 8.1 and MDT 2013.
I have followed extensive tutorials on how to create a master image using Microsoft Deployment Toolkit. my goal is to have a fully configured windows 8.1 image which I can deploy through Windows Deployment Services. I have been relatively successful thus far,
except for one issue I have run into, which is successfully capturing this image as a .WIM.
I have successfully created a task sequence and the task sequence is able to run all the way through until the final step. Essentially the task sequence is supposed to install Windows and Office, then suspend the task sequence to allow me to make customisations
to the start screen and desktop background, and I simply click resume task sequence, and the task sequence should sysprep reboot and capture the machine image as a .WIM file.
the task sequence is able to sysprep the machine, but upon rebooting it boots into out of box experience, and does not create a wim file. I receive an error saying: "cannot find script file C:\ltibootstrap.Vbs" after the machine completes OOBE
I am using Windows Server 2012 r2, creating my Master machine image using hyper-v, and my master image is running Windows 8.1.
Any help would be greatly appreciated.

I'm not sure about the sequence of steps here. Try taking your captured.wim file and deploying it using MDT again, or at least to another machine. MDT sometimes leaves extra files around on the captured machine, so simply rebooting it may not get a accurate
test results.
IF you are getting the ltibootstrap.vbs it is most likely because there is a stray unattend.xml file somewhere in your image that is looking for this file. Crack open your Wim file and search for any unattend.xml files.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

How do you create a disk image using Disk Copy?

Hello,
Is there any way you can create a disk image using Disc Copy? Is there a better way to create a Disk Image?
I would like to burn two copies of a 4.2 gig folder on my mac. I usually insert a blank DVD-R and then the mac asks if I would like to prepare it at which point I click "yes". An icon of a DVD disk appears on the desktop and then I drag my files onto this icon. It takes a few moments to create the disc image and then I click "burn". However, after the disc is burned the disc image disappears and I have to start all over again if I want to make another copy.
How can I save this disc image? If I could save the disc image, it would enable me to burn a second DVD right after the first without having to create the disk image all over again. This would save a lot if time.
I am using OS 10.1.5
Thank you for any suggestions

Thanks Niel for the info about creating a Disk Image with the Disk Copy utility in OS 10.1.5
That worked however when I insert a blank DVD-R, the disk image still has to be copied to the DVD-R buffer and then it can be burned. And so this doesn't really save any steps - the "copying into the buffer" step still has to occur whether or not you have created a disk image of your files. So creating a disk image doesn't really shorten the process of burning multiple copies of a DVD.
I will try to describe the steps more clearly:
Two of the three steps for creating a DVD (steps 2 and 3) are very time-consuming:
1. put blank DVD into the drive (a DVD disk icon quickly appears)
2. drag files onto this icon (this step takes a long time as the files are copied into the buffer)
3. choose "burn" (the actual burning also takes a long time)
I was hoping that when I create two or more DVDs of the same files, I could first create a Disk image so that when I create the second DVD, step 2 could be skipped. That does not seem to be the case - the disk image still has to be re-loaded. And so I think I will not bother with the Disk image idea - it doesn't seem to be necessary or helpful when burning DVDs to backup data.
Thanks for your suggestion.

Create Bitnami Stack Image with Reserved Public virtual IP (VIP)

Similar Messages

Maybe you are looking for