Create blank screen space between two ALV grids

I want to create some blank screen space between the two ALV grids I have on the screen. Can someone tell me how to do this?
Thanks and best regards,
Sandy

You don't have link the two containers.
I guess you have a grid and tree control that you want to display. So, use a different container for each of these controls, so that they appear differently.
If you don't want space in between them, you can have one container and split that into and display the tree and grid in each of the split portions.
The advantage with this will be you can resize the tree/grids using the vertical line that separates them.
Take a look at WE02 transaction to see what I am trying to explain.
Regards,
Ravi

Similar Messages

Two ALV Grids in a single screen are overlapping eachother

Hi,
I have created two ALV grids in a single screen. I have used seperate containers for them.
But on executing them , both the ALV grids are overlapping eachother.
Please give me a solution.

Hi,
IF w_custom_container IS INITIAL.
Creating Object for the Custom Container.
    CREATE OBJECT w_custom_container
      EXPORTING
        container_name              = w_container
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e054. "CNTL ERROR
      WHEN 2.
        MESSAGE e055. "CNTL SYSTEM ERROR
      WHEN 3.
        MESSAGE e056. "CREATE ERROR
      WHEN 4.
        MESSAGE e057. "LIFETIME ERROR
      WHEN 5.
        MESSAGE e058. "LIFETIME DYNPRO DYNPRO LINK
    ENDCASE.
Creating object for the Splitter Container.
    CREATE OBJECT w_split_container
      EXPORTING
        parent            = w_custom_container
        orientation       = 0
        sash_position     = 30
        with_border       = 2
      EXCEPTIONS
        cntl_error        = 1
        cntl_system_error = 2
        OTHERS            = 3.
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e054. "CNTL_ERROR
      WHEN 2.
        MESSAGE e055. "CNTL_SYSTEM_ERROR
    ENDCASE.
Creating Grid Control.
    CREATE OBJECT w_grid1
      EXPORTING
        i_parent = w_split_container->top_left_container.
    CREATE OBJECT w_grid2
      EXPORTING
        i_parent = w_split_container->bottom_right_container.
Building field catalog for ALV.
Fieldcat for the Detail Record.
    PERFORM build_fieldcat        USING: c_1 c_code c_output c_check
                                          c_comcode c_olength,
                                          c_2 c_fileno c_output c_check
                                          c_filenum c_olength,
                                          c_3 c_dedcod c_output c_check
                                          c_dedcode c_olength,
                                          c_4 c_dedfac c_output c_check
                                          c_dedf c_olength.
FieldCatlog for the Error Records.
    PERFORM build_fieldcat_error USING: c_1 c_pernr c_error c_check
                                          c_person c_olength,
                                          c_2 c_desc c_error c_check
                                          c_descp c_olength.
ALV Display.
    CALL METHOD w_grid1->set_table_for_first_display
EXPORTING
   i_buffer_active               =
   i_bypassing_buffer            =
   i_consistency_check           =
   i_structure_name              =
   is_variant                    =
   i_save                        =
   i_default                     = 'X'
   is_layout                     =
   is_print                      =
   it_special_groups             =
   it_toolbar_excluding          =
   it_hyperlink                  =
   it_alv_graphics               =
   it_except_qinfo               =
   ir_salv_adapter               =
      CHANGING
        it_outtab                     = t_error
        it_fieldcatalog               = t_fieldcat_error
   it_sort                       =
   it_filter                     =
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e076. "invalid parameter combination
      WHEN 2.
        MESSAGE e001. "program error
      WHEN 3.
        MESSAGE e078. "too many lines
    ENDCASE.
    CALL METHOD w_grid2->set_table_for_first_display
EXPORTING
   i_buffer_active               =
   i_bypassing_buffer            =
   i_consistency_check           =
   i_structure_name              =
   is_variant                    =
   i_save                        =
   i_default                     = 'X'
   is_layout                     =
   is_print                      =
   it_special_groups             =
   it_toolbar_excluding          =
   it_hyperlink                  =
   it_alv_graphics               =
   it_except_qinfo               =
   ir_salv_adapter               =
      CHANGING
        it_outtab                     = t_output
        it_fieldcatalog               = t_fieldcat
   it_sort                       =
   it_filter                     =
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e076. "invalid parameter combination
      WHEN 2.
        MESSAGE e001. "program error
      WHEN 3.
        MESSAGE e078. "too many lines
    ENDCASE.
ELSE.
    CALL METHOD w_grid1->refresh_table_display
      EXPORTING
        i_soft_refresh = 'X'.
    CALL METHOD w_grid2->refresh_table_display
      EXPORTING
        i_soft_refresh = 'X'.
ENDIF.
Hope it Helps,
Jayant Sahu.

Two AlV Grids in a single screen

I want to bring two ALV GRIDS in a single report output screen.How can i achieve this through Classical coding( not OBJECT ORIENTED ). If possible please provide with codes.
thanks,
Venkat

Hello Venkat
I agree that using fm's this is an almost impossible task whereas using OO-based ALV lists it is just a piece of cake.
For a sample have a look at report ZUS_SDN_TWO_ALV_GRIDS in thread alv
or report ZUS_SDN_THREE_ALV_GRIDS in thread Alv
Regards
Uwe

Can we have two alv grid in the output

Hi
Can we have two alv grid in the output?. If yes how can we do that using oops alv. I think first need to create the container on that two subscreen. is this correct? Thanks.
Regards
Raj

>
Rajitha1234 wrote:
> Hi
>
> Can we have two alv grid in the output?. If yes how can we do that using oops alv. I think first need to create the container on that two subscreen. is this correct? Thanks.
>
> Regards
> Raj
Hi Rajitha,
You can have as many as ALV output in the screen By using OOPS.
By using Container you can pass ALV output.
see the sample Program SALV_TEST_TABLE.
Regards,
Prabhudas

MULTIPLE-ROW drag and drop between 2 ALV grids

Hi,
Can anybody help me with acheiving MULTIPLE-ROW drag and drop functionality between 2 ALV grids.

hi Prakash,
Actually I'm trying to develop multiple drag and drop between 2 ALV's. To understand the events properly, I started working on this sample program where it uses 1 ALV and splits it into 2 and uses single row drag and drop between them. Now I'm making it to work for multiple drag and drop, so that I can use it on my application. This is the code which I'm working on..
*& Report Z_ALV_GRID_CONTROLS_DRAG_DROP                               *
REPORT z_alv_grid_controls_drag_drop.
DATA   : i_ztransactions TYPE TABLE OF ztransactions
                               WITH HEADER LINE.
DATA   : i_ztransactions2 TYPE TABLE OF ztransactions
                               WITH HEADER LINE.
DATA   : ok_code LIKE sy-ucomm .
DATA : mcontainer TYPE REF TO cl_gui_custom_container .
DATA : mcontleft TYPE REF TO cl_gui_container .
DATA : mcontright TYPE REF TO cl_gui_container .
DATA : msplitcont TYPE REF TO
                        cl_gui_easy_splitter_container .
DATA : malv_left TYPE REF TO cl_gui_alv_grid .
DATA : malv_right TYPE REF TO cl_gui_alv_grid .
DATA : mrow TYPE lvc_s_row .
DATA : gt_outtab_source TYPE ztransactions.
DATA : gt_outtab_target TYPE ztransactions.
DATA : g_repid LIKE sy-repid.
DATA:   gs_layout TYPE lvc_s_layo ,
        g_behaviour_alv TYPE REF TO cl_dragdrop .
DATA : mlines TYPE i .
      CLASS lcl_dragdropobj DEFINITION
This is the Class of Drag Drop Object .
This Object is used as a temporary storage means
of the information extracted with drag
CLASS lcl_dragdropobj DEFINITION.
PUBLIC SECTION.
    DATA: i_ztransactions TYPE ztransactions ,
          index TYPE i ,
          original_table(5) TYPE c ,
          proceed_trans(1) TYPE c .
ENDCLASS.                    "lcl_dragdropobj DEFINITION
DATA : mdata TYPE REF TO lcl_dragdropobj .
      CLASS DND_TOOLS DEFINITION
This class contains the methods responding to the
events ONDRAG , ONDROP , ONDROPCOMPLETE
of the ALV Grid Controls
CLASS dnd_tools DEFINITION .
PUBLIC SECTION .
   METHODS:handle_user_command
                           FOR EVENT user_command OF
                           cl_gui_alv_grid
                           IMPORTING
                           e_ucomm.
    METHODS : handle_drag_from_left
                         FOR EVENT ondrag OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_row
                          e_dragdropobj .
    METHODS : handle_dropcomplete_from_left
                          FOR EVENT ondropcomplete OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_row
                          e_dragdropobj .
    METHODS : handle_drag_from_right
                          FOR EVENT ondrag OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_row
                          e_dragdropobj .
    METHODS : handle_dropcomplete_from_right
                          FOR EVENT ondropcomplete OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_row
                          e_dragdropobj .
    METHODS : handle_drop_to_left
                          FOR EVENT ondrop OF
                          cl_gui_alv_grid
                          IMPORTING
                           e_dragdropobj .
    METHODS : handle_drop_to_right
                          FOR EVENT ondrop OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_dragdropobj .
ENDCLASS .                    "DND_TOOLS DEFINITION
      CLASS DND_TOOLS IMPLEMENTATION
CLASS dnd_tools IMPLEMENTATION .
METHOD handle_drag_from_left .
METHOD handle_user_command.
   DATA: lt_rows TYPE lvc_t_row.
    DATA: lt_rows TYPE lvc_t_roid.
    DATA: lt_row TYPE lvc_s_roid.
    DATA: mdata TYPE REF TO lcl_dragdropobj .
    DATA: dragdropobj TYPE REF TO lcl_dragdropobj .
get selected row
    CALL METHOD malv_left->get_selected_rows
      IMPORTING
        et_row_no = lt_rows.
    CALL METHOD cl_gui_cfw=>flush.
    IF sy-subrc NE 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = g_repid
          txt2 = sy-subrc
          txt1 = 'Error in Flush'(500).
    ENDIF.
    CREATE OBJECT mdata.
    LOOP AT lt_rows INTO lt_row.
     mrow = lt_row .
      READ TABLE i_ztransactions INDEX lt_row-row_id INTO
                 i_ztransactions.
      MOVE i_ztransactions TO mdata->i_ztransactions .
      MOVE lt_row-row_id TO mdata->index.
      MOVE 'LEFT' TO mdata->original_table .
      e_dragdropobj->object = mdata .
    ENDLOOP.
ENDMETHOD.                           "handle_user_command
METHOD handle_dropcomplete_from_left .
NB : the following data object MDATA is local to
the method and contains the information from the
import parameter of the method E_DRAGDROPOBJ
    DATA : mdata TYPE REF TO lcl_dragdropobj .
    DATA: lt_rows TYPE lvc_t_roid.
    DATA: lt_row TYPE lvc_s_roid.
    CALL METHOD malv_left->get_selected_rows
      IMPORTING
        et_row_no = lt_rows.
    CALL METHOD cl_gui_cfw=>flush.
    IF sy-subrc NE 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = g_repid
          txt2 = sy-subrc
          txt1 = 'Error in Flush'(500).
    ENDIF.
    LOOP AT lt_rows INTO lt_row.
      mdata ?= e_dragdropobj->object .
      CHECK mdata->proceed_trans = 'X' .
      mrow = mdata->index.
      DELETE i_ztransactions INDEX mrow .
      APPEND mdata->i_ztransactions TO i_ztransactions2 .
      SORT i_ztransactions2 BY kunnr belnr .
      DELETE i_ztransactions2 WHERE kunnr IS INITIAL .
      DESCRIBE TABLE i_ztransactions LINES mlines .
      IF mlines EQ 0 .
        CLEAR i_ztransactions .
        APPEND i_ztransactions TO i_ztransactions .
      ENDIF .
    ENDLOOP.
    CALL METHOD malv_left->refresh_table_display.
    CALL METHOD malv_right->refresh_table_display.
ENDMETHOD .                    "HANDLE_DROPCOMPLETE_FROM_LEFT
METHOD handle_drag_from_right.
    mrow = e_row-index .
    READ TABLE i_ztransactions2 INDEX mrow INTO
               i_ztransactions2 .
    CREATE OBJECT mdata .
    MOVE i_ztransactions2 TO mdata->i_ztransactions .
    MOVE mrow TO mdata->index .
    MOVE 'RIGHT' TO mdata->original_table .
    e_dragdropobj->object = mdata .
ENDMETHOD .                    "HANDLE_DRAG_FROM_RIGHT
METHOD handle_dropcomplete_from_right .
    DATA : mdata TYPE REF TO lcl_dragdropobj .
    mdata ?= e_dragdropobj->object .
    CHECK mdata->proceed_trans = 'X' .
    mrow = mdata->index .
    DELETE i_ztransactions2 INDEX mrow .
    APPEND mdata->i_ztransactions TO i_ztransactions .
    SORT i_ztransactions BY kunnr belnr .
    DELETE i_ztransactions WHERE kunnr IS INITIAL .
    DESCRIBE TABLE i_ztransactions2 LINES mlines .
    IF mlines EQ 0 .
      CLEAR i_ztransactions2 .
      APPEND i_ztransactions2 TO i_ztransactions2 .
    ENDIF .
    CALL METHOD malv_left->refresh_table_display.
    CALL METHOD malv_right->refresh_table_display.
ENDMETHOD .                    "HANDLE_DROPCOMPLETE_FROM_RIGHT
METHOD handle_drop_to_left .
    DATA : mdata TYPE REF TO lcl_dragdropobj .
    mdata ?= e_dragdropobj->object .
    IF mdata->original_table = 'RIGHT' .
      mdata->proceed_trans = 'X' .
    ELSE .
      mdata->proceed_trans = ' ' .
    ENDIF .
    e_dragdropobj->object = mdata .
ENDMETHOD .                    "HANDLE_DROP_TO_LEFT
METHOD handle_drop_to_right .
    DATA : mdata TYPE REF TO lcl_dragdropobj .
    DATA: lt_rows TYPE lvc_t_roid.
    DATA: lt_row TYPE lvc_s_roid.
    CALL METHOD malv_left->get_selected_rows
      IMPORTING
        et_row_no = lt_rows.
    CALL METHOD cl_gui_cfw=>flush.
    IF sy-subrc NE 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = g_repid
          txt2 = sy-subrc
          txt1 = 'Error in Flush'(500).
    ENDIF.
    LOOP AT lt_rows INTO lt_row.
      mdata ?= e_dragdropobj->object .
      IF mdata->original_table = 'LEFT' .
        mdata->proceed_trans = 'X' .
      ELSE .
        mdata->proceed_trans = ' ' .
      ENDIF .
      e_dragdropobj->object = mdata .
    ENDLOOP.
ENDMETHOD .                    "HANDLE_DROP_TO_RIGHT
ENDCLASS .                    "DND_TOOLS IMPLEMENTATION
DATA : mlistener TYPE REF TO dnd_tools .
======================================================
START OF SELECTION
======================================================
START-OF-SELECTION .
PERFORM get_data .
CALL SCREEN 100 .
The screen 100 has the custom control MCONTAINER and
on the flow logic has the following modules :
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
MODULE PREPARE_SCREEN .
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
(Off course not commented out in the real flow logic)
      FORM GET_DATA                                 *
FOR THIS EXAMPLE THE DATA SELECTION IS HARD CODED
FORM get_data .
CLEAR : i_ztransactions , i_ztransactions[] .
i_ztransactions-mandt = sy-mandt .
i_ztransactions-waers = 'EUR ' .
i_ztransactions-kunnr = '0000000001' .
i_ztransactions-belnr = '0000000001' .
i_ztransactions-bldat = '20030101' .
i_ztransactions-dmbtr = '1000' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000002' .
i_ztransactions-bldat = '20030202' .
i_ztransactions-dmbtr = '1010' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000003' .
i_ztransactions-bldat = '20030323' .
i_ztransactions-dmbtr = '1020' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000004' .
i_ztransactions-bldat = '20030404' .
i_ztransactions-dmbtr = '1030' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000005' .
i_ztransactions-bldat = '20030505' .
i_ztransactions-dmbtr = '1040' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000006' .
i_ztransactions-bldat = '20030606' .
i_ztransactions-dmbtr = '1050' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000007' .
i_ztransactions-bldat = '20030707' .
i_ztransactions-dmbtr = '1060' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000008' .
i_ztransactions-bldat = '20030808' .
i_ztransactions-dmbtr = '1070' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000009' .
i_ztransactions-bldat = '20030909' .
i_ztransactions-dmbtr = '1080' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000010' .
i_ztransactions-bldat = '20031010' .
i_ztransactions-dmbtr = '1090' .
APPEND i_ztransactions .
CLEAR : i_ztransactions2 , i_ztransactions2[] .
APPEND i_ztransactions2 .
ENDFORM .                    "GET_DATA
*&      Module STATUS_0100 OUTPUT
The PF STATUS STATUS100 called from the module below,
has on the Standard toolbar the buttons
BACK , EXIT and CANCEL .
These buttons are provided with function code = 'EXIT'
MODULE status_0100 OUTPUT.
SET TITLEBAR 'TITLEDRAGDROP' .
SET PF-STATUS 'STATUS100'.
ENDMODULE.                 " STATUS_0100 OUTPUT
     Module USER_COMMAND_0100 INPUT
The following module checks the User Command and ends
the program
MODULE user_command_0100 INPUT.
IF ok_code = 'EXIT' .
    CLEAR : mcontainer ,
           mcontleft ,
           mcontright ,
           msplitcont ,
           malv_left ,
           malv_right .
    LEAVE TO SCREEN 0 .
ENDIF .
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module PREPARE_SCREEN OUTPUT
MODULE prepare_screen OUTPUT.
IF mcontainer IS INITIAL .
    CREATE OBJECT mcontainer
                  EXPORTING
                  container_name = 'MCONTAINER' .
    CREATE OBJECT msplitcont
                  EXPORTING
                  parent = mcontainer
                  orientation = 1 .
    mcontleft = msplitcont->top_left_container .
    mcontright = msplitcont->bottom_right_container .
    CREATE OBJECT malv_left
                  EXPORTING i_parent = mcontleft .
    gs_layout-sel_mode = 'D'.
    CREATE OBJECT malv_right
                  EXPORTING i_parent = mcontright .
    gs_layout-sel_mode = 'D'.
    PERFORM set_layout_capable_of_drag_dro
                  USING 'X' 'X' .
    CALL METHOD malv_left->set_table_for_first_display
      EXPORTING
        i_structure_name = 'ZTRANSACTIONS'
        is_layout        = gs_layout
      CHANGING
        it_outtab        = i_ztransactions[].
    CALL METHOD malv_right->set_table_for_first_display
      EXPORTING
        i_structure_name = 'ZTRANSACTIONS'
        is_layout        = gs_layout
      CHANGING
        it_outtab        = i_ztransactions2[].
    CREATE OBJECT mlistener .
    CALL METHOD malv_left->set_toolbar_interactive.
    SET HANDLER mlistener->handle_drag_from_left
                FOR malv_left .
    SET HANDLER mlistener->handle_dropcomplete_from_left
                FOR malv_left .
    SET HANDLER mlistener->handle_drag_from_right
                FOR malv_right.
    SET HANDLER mlistener->handle_dropcomplete_from_right
                  FOR malv_right .
    SET HANDLER mlistener->handle_drop_to_right
                 FOR malv_right .
    SET HANDLER mlistener->handle_drop_to_left
                 FOR malv_left .
ENDIF .
ENDMODULE.                 " PREPARE_SCREEN OUTPUT
      Form SET_LAYOUT_CAPABLE_OF_DRAG_DRO
Definition of a Drag & Drop behaviour for the ALV
grid
FORM set_layout_capable_of_drag_dro USING drag drop.
DATA : effect TYPE i ,
         handle_alv TYPE i .
CREATE OBJECT g_behaviour_alv.
effect = cl_dragdrop=>move + cl_dragdrop=>copy .
CALL METHOD g_behaviour_alv->add
    EXPORTING
      flavor     = 'Line'
      dragsrc    = drag
      droptarget = drop
      effect     = effect.
CALL METHOD g_behaviour_alv->get_handle
    IMPORTING
      handle = handle_alv.
gs_layout-s_dragdrop-row_ddid = handle_alv.
ENDFORM.              " SET_LAYOUT_CAPABLE_OF_DRAG_DRO

Report with two ALV grids and a header

Hi experts,
I have a report with two ALV grids in the same screen, each one in a separated container. The information displays it correctly. The report has been implemented by using OO Programming.
My real trouble is in the header. It must have a logo, a title with a specific font and other information.
I'll attach a capture of my need:
[Report with two ALV grids and a header|http://picasaweb.google.com/lh/photo/AcQD49QPmm-0L_jL2iMedA?feat=directlink]
Then, I want to set up the header you can see, with logo, a font with specific features. Obviously, the header you see has taken from another report. But is the same idea.
I've tried with a third container, using the CL_GUI_CONTAINER and CL_GUI_CONTAINER classes, but it doesn't work.
Any idea? Would welcome any help you can provide.
Thanks in advance,
Jorge Rojas

Hi, Jorge.
Should the header be a"attached" to any of the ALV? Or it should be carried alone?
If first applies, you've given the solution yourself: put the info & logo in first ALV's header and invoke it from the proper method.
You could use CL_GUI_DOCKING_CONTAINER CLASS to divide screen in several containers and then, in the upper one, I would create another one docking container to divide the screen into two: the written info could be performed with an HTML viewer class and the logo with a CL_GUI_PICTURE element.
Cheers.

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

Need to eliminate Space between two Pivot table view in OBIEE 11g

Hi,
I have a requirement to eliminate space between two pivot table views. In a single report I have two Pivot table with two different column, I placed both of them one after another, but I need to eliminate the space between two pivot table views as if it should show as a single pivot table in OBIEE 11g.
Could anyone please let me know how I can do this in OBIEE 11g?
Thanks in Advance
Anirban Mitra

If I create narrative view it will be another view. And if I put that in between that two pivot view, it will show the space. I need to remove space between two pivot table within a single report so that it can appear as a single pivot view.
Thanks

Screen GUI Status Query ( ALV Grid)

Hi All,
I am having an ALV grid on a screen .
I want to check the contents of the grid at the press of enter button, at present i have to press the check button available on the ALV grid to check the contents of the grid.
Pls suggest

Make sure that you set "ENTER" as the key which is to trigger the edit event.
        call method alv_grid->set_table_for_first_display
            exporting
                 is_layout              = lt_layout
                 it_toolbar_excluding   = lt_exclude
            changing
                 it_outtab       = ialv[]
                 it_fieldcatalog = fieldcat[].
<b>
* If cancelling points, register "ENTER" as event
* and create the event receiver
         call method alv_grid->register_edit_event
                        exporting
                           i_event_id = cl_gui_alv_grid=>mc_evt_enter.
</b>
*   create Event Receiver
          create object event_receiver.
*   handler for ALV grid
          set handler event_receiver->handle_data_changed for alv_grid.
Regards,
Rich Heilman

Add space between two rows

Hello,
I need to add space between rows. Please let me know how to go about.
I have a messgeComponentLayout Region, i am trying to create a space between two rows.
Presently it is as follows:
Vacation Plan
Sick Plan
I need as follows:
Vacation Plan
Sick Plan
Please let me know how to go about.
Thanks!

The foll. is the region, how do i incorporate the rowLayout as suggested in the discussion. Please let me know.
<?xml version = '1.0' encoding = 'UTF-8'?>

<oa:header version="9.0.3.8.12_1330" xml:lang="en-US" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:ui="http://xmlns.oracle.com/uix/ui" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$" text="Year to Date Accruals and Time Taken (total hrs.):" amDefName="xbol.oracle.apps.xbol.selfservice.loa.server.YtdAM">
<ui:contents>
<oa:messageComponentLayout controllerClass="xbol.oracle.apps.xbol.selfservice.loa.webui.MainRNCO" rows="7" columns="2" amDefName="xbol.oracle.apps.xbol.selfservice.loa.server.YtdAM" id="Main">
<ui:contents>
<oa:messageStyledText id="VaPlCo" prompt="US Vacation Carry Over" viewName="VacPlAcVO1" viewAttr="VacationCarryOver" styleClass="OraDataText"/>
<oa:messageStyledText id="VaPlAc" prompt="US Vacation Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsVacationPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="VaTk" prompt="Vacation Taken" viewName="VacPlAcVO1" viewAttr="VacationPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="FlPlAc" prompt="US Floating Holiday Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsFloatingHolidayPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="FlTk" prompt="Floating Holiday Taken" viewName="VacPlAcVO1" viewAttr="FloatingHolidayPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="AcBaTk" prompt="Accrual Bank Taken" viewName="VacPlAcVO1" viewAttr="AccrualBankPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="item2"/>
<oa:messageStyledText id="SiPlCo" prompt="US Sick Plan Carry Over" viewName="VacPlAcVO1" viewAttr="SickCarryOver" styleClass="OraDataText"/>
<oa:messageStyledText id="SiPlAc" prompt="US Sick Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsSickPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="SiTk" prompt="Sick Taken" viewName="VacPlAcVO1" viewAttr="SickPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="item1" rendered="true"/>
<oa:messageStyledText id="PePlAc" prompt="US Personal Leave Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsPersonalLeavePlan" styleClass="OraDataText"/>
<oa:messageStyledText id="PeTk" prompt="Personal Taken" viewName="VacPlAcVO1" viewAttr="PersonalLeavePlan" styleClass="OraDataText"/>
</ui:contents>
</oa:messageComponentLayout>
</ui:contents>
</oa:header>

How to eliminate the space between two analysis in the Dashboard?

Hi All,
I have created a Dashboard which contains 12 analyses arranged vertically. When i see the report in the dashboard section it contains some standard space between each analysis. So it looks like separate separate analysis arranged in dashboard. But i want it to look a single table is it possible by reducing the space between every analysis? If possible please let me know how to achieve this in clear manner.
Awaiting your valuable responses.
Thanks in Advance
Thenmozhi

Hi,
Yes,try to adjust the analysis view (table/pivot/chart view )Formating option...
FYI: try to align formating left,right,top/bottom padding and also try to reduce the width and height..
Please refer the below
Re: Eliminating the space between two reports in OBIEE dashboard page Section
THanks
Deva

How to get space between two values in a single cell of a table.

hello,
how to get space between two values in a single cell of a table.
thanks a lot.
kailash.

sorry i got the answer.

Drag and Drop between two ALV Tree.

Hi,
I am trying the drag and drop event between two ALV Tree.
After the occurence of drag and drop event , I am able to get the node key of the source tree node which is dragged . But when the node is dropped onto the target ALV Tree the target node does not gets selected, instead a plus mark appears focussing on the target node in the target ALV Tree. Can anyone suggest a way to get the node key of the focussed target node. Thanks.
Regards,
Prabaharan

hey Prabaharan,
y don't u check this link once
u may get some idea
Re: ALV tree - change node text
Regards
Naveen

Specifying space between two page item

hi,
how to specify the space between two page item which are in a same horizontal row. i have used "</td><td width=”50%”> " in post element text of the first field but even am not getting the space i also used " " in in post element text of the first field. please give me a solution.

hi,
I also tried by setting the second item's field as NO. but it is not working if i am appending
*"</td><td width=”50%”>&nbsp*;" this to "*HTML table cell attribute*" am getting the space but above the item1 some text is displaying as "*colspan="1" rowspan="1" align="left" valign="middle*">"

How to hide empty space between two pages.

Hi.
I want to hide the grey space between two pages in Pages, so the last line of the top page could join directly the first line of the bottom page for quicker reading... Is it possible? Is their a way to stick pages tray to tray without the default empty grey space? This option was possible in Word 2007...
Thank you.

demifraction,
Is your document in Layout view?
Under the View menu, Hide Layout:
This doesn't hide all the grey space, but it stops the grey in the layout margins.
Regards,
Ian.

Create blank screen space between two ALV grids

Similar Messages

Maybe you are looking for