Create BRF object and call in Webdynpro ABAP

Hi,
can you please let me know how can i create BRF obejects and call them in webdynpro ABAP in WDC.
Thanks,
Mahesh.Gattu

Hi Sachin,
I am new to BRF,and i went through the BRF documents which are provided in Help.sap.Now my requirement is ,I have an webdynpro screen to create a policy number.When i click on Save all the fields should be validated through BRF.Being new to this environment,i need a start up help to achieve this.Please let me know the steps to validate the fields in webdynpro.
Thanks
Naresh Bammidi

Similar Messages

How to create a table to use in webdynpro ABAP

Hi Guys,
Can anybody let me know how to create a table to use in webdynpro ABAP. I am new to ABAP. It would appreciable if i get useful answer. Thanks In Advance
Regards
Ravi

Hi! You can use transaction code SE11. Please refer to http://help.sap.com/saphelp_nw70/helpdata/en/6c/f2934259a5c66ae10000000a155106/frameset.htm
Please note that table name should start with 'Y' or 'Z' - by SAP naming conventions object names starting with 'Y' and 'Z' are reserved for customer application development.
Please reward points if helpful

Creating remote objects and passing the retrieved data to modules

I found at this Adobe tutorial a nice "RemoteService" class that creates a RemoteObject and contains the functions for handling the result and fault events. If I wanted to use this approach, how could I pass the data from the result handler to interfaces that modules from the main application could use?
I could put the RemoteService/RemoteObject in the modules, but (in my opinion- and I could be wrong) the best design seems to be using the remote calls in the main app and passing the data along to the modules.
Ultimately, I would like to know what the "best practices" are for creating remote objects and passing the retrieved data to modules
Thanks!

public void mouseClicked(MouseEvent e) {
X x = new X(e.getX(), e.getY());
}I don't see the difficulty.

Error in creating Connection Object and Device Location

Hi ,
When i am creating Connection Object and Device Location , system is giving dump . all other object are working fine.
the error is gievn below :
Error in reading table TE130.
i checked this the table , its have no entries ( mainly field ISTYP is blank ) and this is the cause of problem .
Could you please tell me that how to fill this table before creating Connection object and device location. i think some configuration should be needed for this but i dont know how .
thanks and regards
Deepak.

Hi Deepak,
You can check standard configuration in client 000.
Meanwhile you can use this settings:
ISTYP TPLKZ FLTYP NUMKI NUMKE
C AO_GP A 01 OC
D AO_GP G 02 OC
This is where you define structure indicator for isu technical location category.
ISTYP correspond to the type of technical location in ISU, C for connection object and D for device location
The content of TPLKZ is defined in the following menu in SPRO.
Plant Maintenance and Customer Service
Master Data in Plant Maintenance and Customer Service
Technical Objects
Functional Locations
Create Structure Indicator for Reference Locations/Functional Locations
Hope it helps,
Regards,
Daniel Valenzuela
Edited by: Daniel Valenzuela on Feb 4, 2008 3:22 PM

Creating graphics object and modifing it

hi every body i would like to create a Graphics object to modify it (by using the method insert string)
but using Graphics g=new Graphics is not possible how can i create it inside other java code.
i 'am trying to create an object and finally to send it to the printer(dot matrix printer ) to be printed but i don't know how to do it. i read in some books that they create a methos (paintComponent) witch automatically receives a graphics object but this method i can not use because i would like to draw string in a while statement.

Post your code and let me see if I can help.
Bemmah

Slow creating ReportDocument object and loading report

Hi all,
I realise this question has come up several times before, I've been searching the internet and have found similar problems but non that match my own. Sorry this is a little long winded but I would like to give as much detail as possible.
I use CR 2008 and VS2010 on my development machine. And I have installed CR 2008 Redist SP3 on the production server.
My application is a simple console application accepting parameters such as report name, print or export, and of course the report parameters.
CrystalDecisions.CrystalReports.Engine.ReportDocument rptDoc = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
rptDoc.Load(sParamDOC); //sParamDOC being the report name passed in via command line
It has to be like this because it integrates into an old system in the background. Of course it being like this means I can not pre-load dll's on application startup (as I've seen suggested several times).
All of this is in house, I'm an OU administrator and an administrator on the server. The server is only accessed via remote desktop and the OS is windows server 2003. I installed all of the neccesary software to make this work.
What is really puzzling me though is that when I use this program via command prompt, logged in as me, it creates the object and loads the report in a matter of seconds. Yet if anybody else runs it (even other administrators of the server) the program can take 30-60 seconds to create the ReportDocument object and the same again to load the report.
I initially only noticed this for the standard users, which was why I created another admin to test. I don't think it's a problem with the report design because it works quick for me. I read an article about this happening with reports created in Crystal version 9. So I tested with a report made from scratch in 2008 and still get the same result. I also read another article about default printers, 'dissociate printer' option is selected and locally the default printers are set to the same printer also.
Does anybody have any suggestions as to where I could look next?
I saw in another article some registry keys you can use to turn on logging for crystal reports, I want to do this but where does it put the log files?
Oh, one more thing the server orginally had redist 2.3 on when I noticed this issue, updating to SP3 (redist 3.3) if anything made it slower, and a little more inconsistant of load times.
Thanks
Gavin

I figured out what this was. I thought I would come back and post incase anyone else has the same issue... the reason it was slow for the other users is because they could not access the internet. My program doesn't use the internet but the operating system is automatically trying to verify the dll's publishers. you can disable this see the following blog:
[http://blogs.msdn.com/b/amolravande/archive/2008/07/20/startup-performance-disable-the-generatepublisherevidence-property.aspx|http://blogs.msdn.com/b/amolravande/archive/2008/07/20/startup-performance-disable-the-generatepublisherevidence-property.aspx]
Regards
Gav

Create EJB and call it from ABAP

Hi all,
I have written a stand-alone-Java application, which should be converted into a web application, which has no gui.
This application should be triggered by a abap-program.
Following questions, do I have to write a servlet and a ejb or is it possible to call the ejb directly from the abap-program?
What do I have to do make an outbound call from abap?
Thank you for your support.
Kind regards, Patrick.

Hi.
You can call the EJB directly from Abap. XI uses this functionality extensively.
Follow these steps:
1) Deply the bean on the java stack.
2) You now need to setup a RFC destination in the JCO RFC Provider service in the j2ee visual adminstrator. Point the Repository section to the application server you want to run the Abap reort on. When you do this the j2ee engine will register itself as a possible RFC destination on this application server.You can choose your own program id...
3) You then need to goto tran sm59 on the app server where the Abap report is going to run and setup a connection of tcp type to the j2ee machine. Specify the same program id you used in step in the technical settings.
4) Then just use the bean name when you do the rfc call in the abap report.
Hope this helps if U have not done it yet.

Error when Interative Adobe Form is called from Webdynpro ABAP.

Hi Experts,
I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
Line: -
The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Line: -
When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
Thanks in Advance.
Regards,
Arun.

Hello,
Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
and especially note 999998
Regards, Otto

Create PMD (Clinical Document) Document from Webdynpro ABAP

Greetings everyone,
I have developed two PMD document category(Tcode :N2T6 ) for Clinical documents in SAP R/3 and somehow with the limitation of R/3 in terms of developing user friendly screens like Auto fill and image processing etc...,Users do not satisfy with it.So we are planning to develop in Webdynpro ABAP.But i am not sure how do we integrate the webdynpro development with IS-H PMD (clinical documents) documents ,also I am looking for BAPI's to create our customized parameterized documents.Any help will be really appreciated.
Thanks,
Vignesh

Hi Vignesh,
You are right that certain features, such as auto-completion, are not supported in the PMD toolset. But as most of the data captured in those documents have a high importance for treatment process, you need to elobarate whether such a feature has any impact on patient safety. Just a quick one - user types An ... and the system determines matching diagnoses such Anorexia or Angina. In case the user picks the wrong one by accident the patient safety is an issue.
Other features such as image management can be used. For that you need to use a PMD link module which does provide the image integration. Siemens will ship in the next release EhP6 such a link module for a third party imaging software. Beforehand the link module use with custom development.
In general Siemens has started a product redesign program named "Smart UI". It's major aim is to provide an up-to-date user interface for all major application within i.s.h.med. The very first application we plan to ship is a web-based electronical medical record.
In case you still want to develop your application, I'm sorry to say, but there are no BAPIs or Web services in the standard delivery. For changes to existing documents you can utilize the PMD API of generator version 2. But be aware that document creation is not supported by the API. You need to have a document. Also certain user exit developments may brake a change without having the GUI running. For instance a popup in the save routine will cause a dump if no SAP GUI is available.
Hope this help.
Axel Biernat
Siemens AG
Product Commercialize

Non-sap screen look and feel in webdynpro abap

Dear Experts,
I have a Webdynpro ABAP application which is fetching data from LFA1 and LFB1.
My client wants a non-sap look and feel onto the screen, he doesnt want the SAP Color and all.
How can i achieve this to look it commercial ??
Please suggest.
Regards,
Mamai.

Hi Mamai,
WDA,maintain two parameters WDFORCEEXTERNALSTYLESHEET = 'X' and WDTHEMEROOT = 'CustomerThemes".
for ur application , add the parameter sap-ep-themeroot=/SAP/PUBLIC/BC/UR/NW5/THEMES/MYCUSTOMTHEME to ur application URL , where MYCUSTOMTHEME is the theme u have created under the path /SAP/PUBLIC/BC/UR/NW5/THEMES/ in ur system.
Please go through this..
http://help.sap.com/saphelp_nw70/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/46/89af7fbe4d429ee10000000a1553f7/content.htm
and for custome theme..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7015b1f9-535c-2910-c8b7-e681fe75aaf8?quicklink=index&overridelayout=true
Re: Custome theme or stylesheet for one WD Application
stylesheets..
http://help.sap.com/SAPhelp_nw73/helpdata/en/47/af752005c92fe1e10000000a42189d/content.htm
Cheers,
Kris.
Edited by: kissnas on Apr 21, 2011 6:44 AM

Creating parameters dynamically and calling a procedure but strange issue

Okay I have the following program that is calling a procedure(data_compare_utility)[pasted below] and data_compare_table_setup table definition and data(isert scripts) are pasted below :
DECLARE
--FP_OLD_TABLE VARCHAR2(200);
--FP_NEW_TABLE VARCHAR2(200);
--FP_DATA_COMPARE_ID NUMBER(10) := 1;
--FP_RESTRICTION_CLAUSE VARCHAR2(500) := 'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')';
--FP_RESTRICTION_CLAUSE_4_INS VARCHAR2(500) := 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')';
cursor c_data_compare_table_setup
is
select table_name, old_schema_name, new_schema_name, data_compare_id, restriction_clause, restriction_clause_ins from DATA_COMPARE_TABLE_SETUP;
r_of_data_compare_table_setup c_data_compare_table_setup%rowtype;
Lv_args_4_data_compare_utility varchar2(500);
BEGIN
--FP_OLD_TABLE := 'BIAPPS_11.RAHUL_EMPLOYEES';
--FP_NEW_TABLE := 'RAHULKALRA.RAHUL_EMPLOYEES';
open c_data_compare_table_setup;
Loop
fetch c_data_compare_table_setup into r_of_data_compare_table_setup;
exit when c_data_compare_table_setup%NOTFOUND;
--exec RAHULKALRA.P_COMPARE_DATA_UTILITY
Lv_args_4_data_compare_utility := ''''||r_of_data_compare_table_setup.OLD_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','''||r_of_data_compare_table_setup.NEW_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','||r_of_data_compare_table_setup.DATA_COMPARE_ID||','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE||''','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE_INS||'''';
P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
commit;
End Loop;
dbms_output.put_line('rahul');
dbms_output.put_line(''''||r_of_data_compare_table_setup.OLD_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','''||r_of_data_compare_table_setup.NEW_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','||r_of_data_compare_table_setup.DATA_COMPARE_ID||','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE||''','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE_INS||'''');
--P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
--P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
close c_data_compare_table_setup;
END;
Procedure : compare_data_utility:
CREATE OR REPLACE procedure RAHULKALRA.p_compare_data_utility(fp1_old_table in varchar2, fp2_new_table in varchar2, fp3_data_compare_id in number, fp4_restriction_clause in varchar2, fp5_recrtiction_clause_4_ins in varchar2)
as
Lv_common_column_names varchar2(2000);
Lv_primary_column_name varchar2(50);
Lv_insert_data_compare_log varchar2(2000);
--Lv_counter number(10);
Lv_row_id_for_data_compare_log number(10);
Lv_old_table_record_count number(10);
Lv_old_table_rec_cnt_query varchar2(200);
Lv_new_table_record_count number(10);
Lv_new_table_rec_cnt_query varchar2(200);
begin
select max(row_id) into Lv_row_id_for_data_compare_log from data_compare_log;
Lv_old_table_rec_cnt_query := 'Select count(*) from '||fp1_old_table||' '||fp4_restriction_clause;
dbms_output.put_line(Lv_old_table_rec_cnt_query);
execute immediate Lv_old_table_rec_cnt_query into Lv_old_table_record_count;
Lv_new_table_rec_cnt_query := 'Select count(*) from '||fp2_new_table||' '||fp4_restriction_clause;
execute immediate Lv_new_table_rec_cnt_query into Lv_new_table_record_count;
dbms_output.put_line(fp5_recrtiction_clause_4_ins);
if (Lv_row_id_for_data_compare_log is null)
then
Lv_row_id_for_data_compare_log := 1;
else
Lv_row_id_for_data_compare_log := Lv_row_id_for_data_compare_log + 1;
end if;
Lv_insert_data_compare_log := 'insert into data_compare_log values('||Lv_row_id_for_data_compare_log||',''comparing data for '||fp1_old_table||' and '||fp2_new_table||''','''||fp1_old_table||''','''||fp2_new_table||''',TO_DATE('''||to_char(sysdate,'DD-MON-YY HH24:MI:SS')||''',''DD-MON-YY HH24:MI:SS''),'||fp3_data_compare_id||','||Lv_old_table_record_count||','''||'Select count(*) from '||fp1_old_table||' '||fp5_recrtiction_clause_4_ins||''','||Lv_new_table_record_count||','''||'Select count(*) from '||fp2_new_table||' '||fp5_recrtiction_clause_4_ins||''')';
dbms_output.put_line(Lv_insert_data_compare_log);
execute immediate Lv_insert_data_compare_log;
commit;
-- tested : dbms_output.put_line(Lv_insert_data_compare_log);
Lv_common_column_names := f_fetch_common_column_names(fp1_old_table,fp2_new_table,fp3_data_compare_id);
-- tested : dbms_output.put_line(Lv_common_column_names);
Lv_primary_column_name := f_extract_pkey_column_names(fp1_old_table, fp2_new_table);
dbms_output.put_line(Lv_primary_column_name);
p_compare_data(fp1_old_table,fp2_new_table,Lv_common_column_names,Lv_primary_column_name,fp4_restriction_clause,fp3_data_compare_id);
end;
CREATE TABLE RAHULKALRA.DATA_COMPARE_TABLE_SETUP
TABLE_ID NUMBER(10),
TABLE_NAME VARCHAR2(100 BYTE),
OLD_SCHEMA_NAME VARCHAR2(100 BYTE),
NEW_SCHEMA_NAME VARCHAR2(100 BYTE),
RESTRICTION_CLAUSE VARCHAR2(500 BYTE),
RESTRICTION_CLAUSE_INS VARCHAR2(500 BYTE),
DATA_COMPARE_ID NUMBER(10)
Insert into DATA_COMPARE_TABLE_SETUP
(TABLE_NAME, OLD_SCHEMA_NAME, NEW_SCHEMA_NAME, DATA_COMPARE_ID, RESTRICTION_CLAUSE, RESTRICTION_CLAUSE_INS)
Values
('W_CHNL_TYPE_D', 'BIAPPS_11', 'RAHULKALRA', 1, 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')', 'WHERE W_INSERT_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''') OR W_UPDATE_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''')');
Insert into DATA_COMPARE_TABLE_SETUP
(TABLE_NAME, OLD_SCHEMA_NAME, NEW_SCHEMA_NAME, DATA_COMPARE_ID, RESTRICTION_CLAUSE, RESTRICTION_CLAUSE_INS)
Values
('RAHUL_EMPLOYEES', 'BIAPPS_11', 'RAHULKALRA', 1, 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')', 'WHERE W_INSERT_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''') OR W_UPDATE_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''')');
I am facing the following error for this command when I call P_compre_data_utility procedure from my anonymous block:
P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility); -- the error is pasted below
if I do a dbms_output.put_line(Lv_args_4_data_compare_utility) and then copy paste its output and call P_COMPARE_DATA_UTILITY, the procedure is getting executed, here is that command :
P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
Error:
ORA-06550: line 27, column 7:
PLS-00306: wrong number or types of arguments in call to 'P_COMPARE_DATA_UTILITY'
ORA-06550: line 27, column 7:
PL/SQL: Statement ignored
Question : just want to know whats wrong with : P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
please help me.
Regards
Rahul

Mac_Freak_Rahul wrote:
Hi All,
I am really sorry, my head is so aching since I am not a regular plsql coder and to save my life I need to write this code for data comparison between 2 tables .. further sorry about calling p_data_compare utility stupidly : P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
I am calling it now using :
execute immediate 'exec P_COMPARE_DATA_UTILITY('||Lv_args_4_data_compare_utility||')';If you are sure the call works then, exec would not work since it is a SQLPLUS command.
try
execute immediate 'BEGIN P_COMPARE_DATA_UTILITY(''||Lv_args_4_data_compare_utility||''); END;';
PS: I can manually give table names to my utility , just need 60 tables to compare but would be great if I can work it out this eay.
2) I can sound very stupid since my head is aching I am not a regular plsql coder but from now on I would be one, please helpJust for your sake, to Compare 60 tables (Supposing you just want to verify count of records), you are writing an entire procedure; You might have completed this activity by now doing the manual way. By taking this way, you are investing time to generate a correct code (as you just mentioned not being a regular plsql developer) you are stuck with some un-identifiable issues.
As an alternate way, I would suggest you to export the data, after ordering, into a spreadsheet and then validate. Also, since it looks like you are comparing the data in the same database between schemas, you can also use the SQL Navigators Data Compare utility and there are many more readily available in market.
I would wish you the best if you still prefer taking the approach.

Is there any way to create a folder in presentation server - webdynpro abap

Hello,
My requirement is to create a folder in presentation server using webdynpro abap..
I tried on this CL_GUI_FRONTEND_SERVICRES classes ..but its getting an short dump.
Is there any way to create folder using classes / FM..
Regards,
Praveen kumar reddy s.

Hi PRaveen,
Check this.. WD_TEST_APPL_ACFEXECUTE
Check Thamos article..
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
go for help..
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b91539878a2d67e10000000a42189c/content.htm
Cheers,
Kris.
Edited by: kissnas on May 10, 2011 2:24 PM

Drag And Drop In Webdynpro Abap

Hi,
Is It Possible For Drag And Drop Option For Text Elements ( not For Images) In Webdynpro Abap..
Do NeedFull Help..

Hi,
Drag and drop option is not possible for Text elements.
It is possible only for Trere,Image,Itemlistbox,Table.
Have a look at
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307f2eae-8cf0-2d10-6088-8aa2b1f00b23?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/en/a5/bf47414eca430794189fbb5919cc2f/frameset.htm
Regards,
Karthiheyan M

Calling a webdynpro ABAP component from a BSP...

We have a BSP application. On which we have a tab strip control. Upon clicking on one of the tabstrips, is there a way I can launch and display an output from a webdynpro ABAP component?
Any ideas will be appreciated.
Thanks
- Sekhar

Raja,
I tried get the iframe tag
<IFRAME NAME="Frame1" SRC="your_web_dynpro_link.htm" >
</IFRAME>
with the SRC = "<the URL from the web dynpro application>"
Did not work. I am sure I am doing something wrong. In fact it did not work even for a BSP application.
Any ideas anyone?
Thanks
- Sekhar

Hi. how to create Subroutine Pool and call it from sapscript

HI,
Can anyone tell is there any standard subroutine pool available which could fetch the customer number.
how to create an subroutine pool and call it from the sapscript..
please help me
Advance Thanks..
Guhapriyan.

Hi Guhapriyan,
1. Create a FORM in your program.
2. call it from sapscript using
/:   PERFORM GET_COMPANY_INFO IN PROGRAM YHRR_OFFER_CONTRACT_FORM
/:   USING &P0001-BUKRS&
/:   CHANGING &COMP_NAME&
/:   ENDPERFORM
3. The form in your program should be of the following parameters only.
form GET_COMPANY_INFO tables IN_PAR structure ITCSY
                        OUT_PAR structure ITCSY.
(important is IN_PAR, OUT_PAR -
where in your read the values passed,
and pass back the values
thru internal table using varname, varvalue)
regards,
amit m.

Create BRF object and call in Webdynpro ABAP

Similar Messages

Maybe you are looking for