Creating remote objects and passing the retrieved data to modules

I found at this Adobe tutorial a nice "RemoteService" class that creates a RemoteObject and contains the functions for handling the result and fault events. If I wanted to use this approach, how could I pass the data from the result handler to interfaces that modules from the main application could use?
I could put the RemoteService/RemoteObject in the modules, but (in my opinion- and I could be wrong) the best design seems to be using the remote calls in the main app and passing the data along to the modules.
Ultimately, I would like to know what the "best practices" are for creating remote objects and passing the retrieved data to modules
Thanks!

public void mouseClicked(MouseEvent e) {
X x = new X(e.getX(), e.getY());
}I don't see the difficulty.

Similar Messages

Using PHP Data Services to create an object and accessing that objects data in an unbound way in AS

Hello,
I've been able to use the php data services and bind the results of a function to a component. However I am having a hard time figuring out the syntax to use the data services to create an object out of the results, and then use that object as an array of filenames to provide the current index of the filename to a new sound object.
My problem is obviously in not being able to figure out the specific syntax, I have declared the service and and object of the services returned type and in the creationComplete() function I have assigned object.token = service.getData();
I've tried various ways of then pulling that data out of the object, with no success.
Can someone point me in the right direction?
This code probably looks horrible because it doesn't work yet.
- Joel
            import flash.media.Sound;
            import flash.media.SoundChannel;
            import mx.controls.Alert;
            var playing:Sound = new Sound();
            var channel:SoundChannel = new SoundChannel();
            var sndIndex:int=0;
            var skpTr:String;
            public function init():void{
             mp3Array.token = mp3service.getData();
             currentTrack(mp3Array.lastResult.filename);
                 trace(mp3Array.lastResult.filename[sndIndex]);
            public function currentTrack(t:String):void{
                playing = new Sound();
                playing.load(new URLRequest("mp3/" +t));
            public function skip():void{
                stop();
                if (sndIndex != mp3Array.lastResult.length-1){
                    sndIndex++;
                    var skipTr:String=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
                } else {
                    sndIndex=0;
                    skipTr=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
            public function stop():void{
                channel.stop();
            public function play():void{
                channel = playing.play();
    <fx:Declarations>
        <s:CallResponder id="mp3Array"/>
        <mp3services:Mp3Service id="mp3service" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        
    </fx:Declarations>

Hello Joel;
In retrieving your data - what is your php returning to FB, an object, object array, an array? Either way, I have a brief example below that an object(s) is being returned. Pull the data from the lastResult in a ResultEvent. The object instantiated in the resultEvent will contain your data and you can do what you want from there.
Also, I always use Network Monitor to see what data (if any) is being returned from the server, you can also see how it is being sent back.
John
private function init():void
     mp3Array.token = mp3service.getData();
     mp3Array.addEventListener(FaultEvent.FAULT, faultHandler);
     mp3Array.addEventListener(ResultEvent.RESULT, mp3Array_resultHandler);
protected function faultHandler(event:FaultEvent):void
     Alert.show("There was a fault error!" + event.message, "Fault Error", Alert.OK);
protected function mp3Array_resultHandler(event:ResultEvent):void
     // Not sure if your service is sending back an object or an array or ?
    var info:Object = mp3Array.lastResult;
     doSomeFunction(info)
protected function doSomeFunction(data:Object):void
     trace(info.filename);

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

How to retrieve the procedure value and pass the value to a form field

How to retrieve the procedure value and pass the value to a form field?

Set property for the field and the value is the actual procedure/function.
Cheers

Virtual KF(as Date) in Cube and pass the variable value to this VKF runtime

Hi ,
User would enter 1 date using date variable untime.
My cube also has 1 Completed Date (KF).
And i wann do comparisan based on input variable and exisitng variable.
Can i add 1 Virtual KF(as Date) in Cube and pass the variable value to this VKF runtime and do the calculation in cube ???
I know the same thing i can do in formula , but i have some different req.which i am unable to explain u here .
So please let me know can i use VKF if yes how ???
Points would be thrown for all .
Bapu

it's the exact posting from your last post. Please don't duplicate the postings, so that we can help you in one thread and not so many different threads

HT200197 my apple tv won't pass the setting date and time screen?

why won't my apple tv pass the setting date and time screen?

That indicates a network issue.
Check the DNS settings, they should be set to automatic.

Slow creating ReportDocument object and loading report

Hi all,
I realise this question has come up several times before, I've been searching the internet and have found similar problems but non that match my own. Sorry this is a little long winded but I would like to give as much detail as possible.
I use CR 2008 and VS2010 on my development machine. And I have installed CR 2008 Redist SP3 on the production server.
My application is a simple console application accepting parameters such as report name, print or export, and of course the report parameters.
CrystalDecisions.CrystalReports.Engine.ReportDocument rptDoc = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
rptDoc.Load(sParamDOC); //sParamDOC being the report name passed in via command line
It has to be like this because it integrates into an old system in the background. Of course it being like this means I can not pre-load dll's on application startup (as I've seen suggested several times).
All of this is in house, I'm an OU administrator and an administrator on the server. The server is only accessed via remote desktop and the OS is windows server 2003. I installed all of the neccesary software to make this work.
What is really puzzling me though is that when I use this program via command prompt, logged in as me, it creates the object and loads the report in a matter of seconds. Yet if anybody else runs it (even other administrators of the server) the program can take 30-60 seconds to create the ReportDocument object and the same again to load the report.
I initially only noticed this for the standard users, which was why I created another admin to test. I don't think it's a problem with the report design because it works quick for me. I read an article about this happening with reports created in Crystal version 9. So I tested with a report made from scratch in 2008 and still get the same result. I also read another article about default printers, 'dissociate printer' option is selected and locally the default printers are set to the same printer also.
Does anybody have any suggestions as to where I could look next?
I saw in another article some registry keys you can use to turn on logging for crystal reports, I want to do this but where does it put the log files?
Oh, one more thing the server orginally had redist 2.3 on when I noticed this issue, updating to SP3 (redist 3.3) if anything made it slower, and a little more inconsistant of load times.
Thanks
Gavin

I figured out what this was. I thought I would come back and post incase anyone else has the same issue... the reason it was slow for the other users is because they could not access the internet. My program doesn't use the internet but the operating system is automatically trying to verify the dll's publishers. you can disable this see the following blog:
[http://blogs.msdn.com/b/amolravande/archive/2008/07/20/startup-performance-disable-the-generatepublisherevidence-property.aspx|http://blogs.msdn.com/b/amolravande/archive/2008/07/20/startup-performance-disable-the-generatepublisherevidence-property.aspx]
Regards
Gav

Two remote objects calls on the same php class

Hi to all,
I've encountered a strange issue while developing with remote objects.
I've a mxml component with an init() method inside which is called by a menu.
When the init() method is called it makes 7 remote object calls which are bound to some components' dataprovider.
Among this calls I've got 2 remote object which refer to the same remote class. This because I have to call the class twice and the bind the result to two different combobox. Below you find the code:
<mx:RemoteObject id="myFile" source="myRemoteClass" destination="amfphp" showBusyCursor="true" makeObjectsBindable="true" fault="traceFault(event)"/>
<mx:RemoteObject id="myXls" source="myRemoteClass" destination="amfphp" showBusyCursor="true" makeObjectsBindable="true" fault="traceFault(event)"/>
in the init function I make this calls:
myFile.listDir("dir_1")
myXls.listDir("dir_2")
then in the mxml code I bound the result of myFile to combobox1 and the result of myXls on combobox2.
The problem arise when I call the myXls' listDir method. When I call it I receive the following error:
code:
Client.Error.DeliveryInDoubt
Message:
Channel disconnected
Detail:
Channel disconnected before an acknowledgement was received
The strange thing is that not only the myXls object returns this error, but also all the other 6 remote object return the same error above.
I'm not sure, but I guess that the error could be caused by the two remote object which call the same php remote class. If I comment one of the two calls everything works fine.
Do you have any suggestion about?
Thanks!!
Bye
Luke

Hi Jan.
1) We have the 2 VO, each with 3 rows to fill in data. What I mean is that when i just fill in all the fields for the first row of the first VO, and the value of one of these fields is bigger than 50, then after the exception is thrown and the message is displayed, the fields for the first VO are duplicated and shown in the second VO as if the user had inserted them.
2) We tried yesterday the validateEntity and a Method and Atributte Validator approaches after reading that white paper with the same results.
The validation is correctly done using any of the those methods.
I will try to reproduce this issue with the HR schema.
Thanks in advance once again.

How to pass the uwl data in BPM to other portal?

Hi,gurus,
I have two questions about BPM?
1. I want to pass the UWL data in BPM to other portal (BEA Websphere portal),how to do that?If websphere portal offered a method to me,how can I pass the parameter to that method?At first,we want to use the SAP EP uwl,and display the uwl in BEA portal.But at last,they want to create some tables in BEA and offer a method to CE BPM. So how to do that?
2.How to call ecc workflow in BPM?And how to call BPM in ECC workflow?
Thanks in advance.Any help will be appreciated!

Hi,
Regarding your qustion on calling SAP Busines Workflow from BPM and vice versa, I think directly it is not possible to give a call. You can invoke outside functionality only if you can expose it as a Web Service which can be used as an automated activity or in a Human Task with custom code.
Hope this help!!
Regards,
Arafat

Declare and initialize a varray of collection Object and pass it as OUT Par

Hi ,
How to declare and initialize a varray of collection Object and pass it as OUT Parameter to a procedure.
Following is the Object and VARRAY Type 's I have created and trying to pass the EmployeeList varray type variable as an OUT parameter to my stored procedure, but it is not working. I tried different possibilities of declaring and initializing the varray type variable but it did not work. Any help would be appreciated.
CREATE TYPE Employee IS Object
          employeeId     Number,
          employeeName VARCHAR2(31),
          employeeType     VARCHAR2(20),
CREATE TYPE EmployeeList IS VARRAY(100) OF Employee;
/* Procedure execution block */
declare
employees EmployeeList;
begin
EXECUTE displayEmployeeDetails(100, employees);
end;
Thanks in advance,
Raghu.

but it is not workingWhat's the definition of not working?
Error messages are always helpful.
SQL> CREATE OR REPLACE TYPE Employee IS Object
2 (
3 employeeId Number,
4 employeeName VARCHAR2(31),
5 employeeType VARCHAR2(30)
6 );
7 /
Type created.
SQL>
SQL> CREATE OR REPLACE TYPE EmployeeList IS VARRAY(100) OF Employee;
2 /
Type created.
SQL> CREATE OR REPLACE PROCEDURE getEmployeeDetails (
2    o_employees OUT employeelist
3 )
4 AS
5 BEGIN
6   o_employees := employeelist();
7   o_employees.EXTEND;
8   o_employees(1) := employee(1,'Penry','Mild Mannered Janitor');
9 END;
10 /
Procedure created.
SQL> set serveroutput on
SQL> declare
2   employees employeelist;
3 begin
4   getemployeedetails(employees);
5   for i in 1 .. employees.count
6   loop
7    dbms_output.put_line(employees(i).employeeid||' '||
8                         employees(i).employeename||' '||
9                         employees(i).employeetype);
10   end loop;
11 end;
12 /
1 Penry Mild Mannered Janitor
PL/SQL procedure successfully completed.
SQL>

Error in creating Connection Object and Device Location

Hi ,
When i am creating Connection Object and Device Location , system is giving dump . all other object are working fine.
the error is gievn below :
Error in reading table TE130.
i checked this the table , its have no entries ( mainly field ISTYP is blank ) and this is the cause of problem .
Could you please tell me that how to fill this table before creating Connection object and device location. i think some configuration should be needed for this but i dont know how .
thanks and regards
Deepak.

Hi Deepak,
You can check standard configuration in client 000.
Meanwhile you can use this settings:
ISTYP TPLKZ FLTYP NUMKI NUMKE
C AO_GP A 01 OC
D AO_GP G 02 OC
This is where you define structure indicator for isu technical location category.
ISTYP correspond to the type of technical location in ISU, C for connection object and D for device location
The content of TPLKZ is defined in the following menu in SPRO.
Plant Maintenance and Customer Service
Master Data in Plant Maintenance and Customer Service
Technical Objects
Functional Locations
Create Structure Indicator for Reference Locations/Functional Locations
Hope it helps,
Regards,
Daniel Valenzuela
Edited by: Daniel Valenzuela on Feb 4, 2008 3:22 PM

[svn:bz-trunk] 5137: Fix failing security tests on BlazeDS/ trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new /clean session.

Revision: 5137
Author: [email protected]
Date: 2009-03-02 10:28:59 -0800 (Mon, 02 Mar 2009)
Log Message:
Fix failing security tests on BlazeDS/trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new/clean session. It looks like some test methods were leaving some things in a bad state which was causing the next test that ran to fail. These may be legitimate bugs/issues so we should investigate further to see what sequence of events gets things into a bad state but for these tests we want all of the test methods to run in isolation.
Modified Paths:
blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/services-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/MessagingAuthProSendTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/MessagingAuthProSendTest.mxml
Added Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/src/qa/messaging/SessionManager.java

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Date fields and compare and get the later date of the fields

I am trying to compare these date fields and compare and get the later date of the fields
Tables are
TABCASER
TABCASER1
EVCASERS
Field
Are
TABCASER1.CASER_no
The dates are to be compared and then get the records with the highest or latest date value.
TABCASER1.CASERRECIEVEDDATE
EVCASERS.FINALEVDATES
EVCASERS.PUBLICATIONDATE
EVCASERS.PUBLICATIONDATE
TABCASER.COMPAREACCEPDATE
I have this code but I am trying to figure out what it all means.
I have several questions.
1.
1.     greatest it is used here to compare right? How do I then output this ? do I store it to a var (coldfusion) ultimately , I wish to send it to a page of records
2.     is it necessary to use todate? And to_date? What does this do?
3.     decode, is this necessary too. What does this do? NULL?
4.
5.
6.     when I do get the query results how do I send it to coldsuion and out put to a display.
Someone sent me this code.
is there abetter way of doing this? To compare the dates and store in a var to display. thanks
Here is my code below:
Greatest(
     CASE
          WHEN INSTR(TABCASER1.CASER_no,'-CE') > 0 THEN
     decode(TABCASER1.CASERRECIEVEDDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER1.CASERRECIEVEDDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-ERNIE') > 0 THEN
     decode(EVCASERS.FINALEVDATES,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.FINALEVDATES)
                         WHEN INSTR(TABCASER1.CASER_no,'-MONIE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-NADINE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         ELSE
     decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE)
                    END
          ,decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE))
          between TO_DATE('#dateformat(form.startDate,"mm/dd/yyyy")#','MM/DD/YYYY') and TO_DATE('#dateformat(form.endDate,"mm/dd/yyyy")#','MM/DD/YYYY')
is there abetter way of doing this? To compare the dates and store in a var to display. thanks

Hi
If you have date datatypes than:
select
greatest(TABCASER1.CASERRECIEVEDDATE, EVCASERS.FINALEVDATES, EVCASERS.PUBLICATIONDATE, EVCASERS.PUBLICATIONDATE, TABCASER.COMPAREACCEPDATE)
from TABCASER, TABCASER1, EVCASERS
where ...-- join and other conditions
1. greatest is good enough
2. to_date creates date dataype from string with the format of format string ('mm/dd/yyyy')
3. decode(a, b, c, d) is a function: if a = b than return c else d. NULL means that there is no data in the cell of the table.
6. to format the date for display use to_char function with format modell as in the to_date function.
Ott Karesz
http://www.trendo-kft.hu

Not able to pass the BEx date prompts from liveoffice

Dear Team ,
Environment : BI 4.1 SP3 ,Dashboards 4.1 Sp3 and Live office 4.1 SP3 .
Bex query has date range variable ,we built dashboard with Live office .Issue is we are failing to pass date variables from dashboard .To pass 1- March -2015 , We tried with 20150301 ,[20150301] ,01.03.2015 ,03.01.2015 ,01/03/2015 and so on .It shows L00 error .
Please share your toughts/expertise .
Thanks in advance.

Hi sateesh,
try to convert the date into datevalue
and pass the datevalue ouput to the bex

How to kill an alv-grid object and refresh the frontend

Hello experts,
i have created an alv-grid display!
now i want to hide the whole alv-table on the screen when user e.g. hits a button!
How can i kill this object and refresh the frontend?
Thanks a lot,
Marcel

Hello Marcel
For this requirement I would use the following approach:
(1) main screen '0100': here you display your ALV grid
(2) Define a dummy screen '0101' the user will never see
(3) Link the container for the ALV grid (e.g. go_docking) to the dummy screen when the user pushes the HIDE button (method LINK)
(4) Link the container back to your main screen when the user pushes the DISPLAY button
I never ever destroy a grid control and re-build it from scratch but always use either of its methods REFRESH_TABLE_DISPLAY or SET_TABLE_FOR_FIRST_DISPLAY.
Regards
Uwe

Creating remote objects and passing the retrieved data to modules

Similar Messages

Maybe you are looking for