Create Business Partner-FPP1-issue with grouping

HI
I am trying to create business partner using FPP1 transaction with my own grouping but i am getting error.
error "You cant create a customer with grouping PS05'.
here PS05 is my own grouping with number range defined.
please check the attached screens for details.What is wrong with my grouping? am not sure.
Any help is greatly appreciated,
regards
giri

Hi Giri,
Seems like you have done the setting for BP grouping with internal number range which is fine. Please be advised that business partner groupings need to have different number ranges and different data has to be entered for each business partner type.
If you getting this error in-spite of defining the number range and assigning the number ranges in customizing then perhaps you missed out the assignment of Business Partner (BP) Type since Business Partner types can be used to group business partners.
When a BP is created, the "business partner type" appears on the initial screen and the control data screen. BP type offers grouping possibilities for business partners.
You can define and assign BP types in
Cross-Application Components->SAP Business Partner->Business Partner->Basic Settings->Define Business partner types.
BP types are defined by a unique partner type number and a description. After this you can proceed to configure field attributes in the "field grouping" as per the selected business partner type.
Let us know if you get the same error in-spite of maintaining the above mentioned settings.
Thanks,
Sagar

Similar Messages

  • Error while Creating Business partner in FPP1

    Hi,
    I can't create Business partner in standard T.code FPP1 in Test System and getting the following error
    "Application object BUPA: Table EBUPD does not exist".
    Kindly help me in solving this issue.

    Hi Venkatesh
    Please add the message class and message number - in this case R1 149 - next time you post a problem.
    There's probably an issue with your setup with for the Business Partner Screen Layout (area menu BUPT).
    The error is raised, because the EBUPD is not a table assiciated with the Business Parter (Application object BUPA). See transaction BUSG or table TBZ1H. It is in fact a dynpro structure.
    Now there's a table that links the dynpro structure fields to the db table fields, which should translate the structure EBUPD into table EKUN fields: TBZ1C. Technically, this is done in function BUS_DYNFLD_TO_DBFLD_CONVERT and it returns the dynpro structure instead of the DB table if there's no corresponding entry in TBZ1C.
    So please check if you can find following entry in TBZ1C (client dependent):
    OBJAP  DYNPTABNM  DYNPFLDNM  DBTABNM  DBFLDNM
    BUPA   EBUPD      +          EKUN     +
    Or via transaction BUSP - Screen field --> Database Field
    If the entry is missing I suggest you add it.
    Yep
    Jürgen

  • Dump Error while creating Business Partner in FPP1

    Dear Experts,
    I am using the EHP5 IS-U component. I am getting the below dump error, when I am trying to create Business partner in T.Code: FPP1.
    **Error in the ABAP Application Program**
    **The current ABAP program "ISU_BUPA_EVENT_DINP1==========FT" had to be  terminated because it has come across a statement that unfortunately cannot be executed.**
    **The following syntax error occurred in program "SAPLES02 " in include "LES02U14  " in line 30:**
    **"The data object "BUS0DIINIT" does not have a component called "MUSTER_KUN".**
    I have searched SAP notes, but I am unable to find any suitable notes to resolve this issue.
    Could anyone help me to resolve this issue.
    Thanks in Advance,
    Regards,
    Aswin

    Hi,
    Please don't go adding fields. Aren't we talking about SAP-standard structures here?
    Have you actually checked (in transaction SE11) that the structure ISU_EKUNINIT is included in the BUS0DIINIT?
    If it is, and the field MUSTER_KUN is missing, then you should raise an OSS note.
    If the structure is not included, you should also talk to OSS. Your ISU installation might be incomplete?
    cheers
    Paul Bakker

  • Error in creating business partner through transaction FPP1 in ECC6.0

    HI,
    We have upgraded our system from 4.7E to ECC6.0.Now when we are trying to create business partner through transaction FPP1 we are getting error as " Exception condition "NO_ACTIVE_TAB" raised."
    Can any one help us in rectifying the error and tell us the possible causes of error.. .??
    Regards,
    Shruti Singh

    Hello,
    Notes  696189 & 618123 may be of some help to you....:)
    Regards
    Olivia

  • How to Create Business Partner with  fix number in t-code :BP

    Dear SIr,
    Normally I will set number range for auto  to create Business Partner. In case , If we would like to crea How to Create Business Partner with  fix number in t-code :BP , howe to do?
    Please kindly advise.
    THnak you and best regards,
    Vimol

    Dear Shobhit,
    How to put the thread as you mentioned.
    Best regards,

  • Create business partner with role 'Internet User' via BP

    Hi,
    We want to create business partner with role 'BUP005 Internet User'
    for purpose to link with created early user su01.
    It's work via isauseradm application, Web UI.
    Now I want to create new role 'BUP005 Interner user' via GUI. I started Tcode BP.
    I filled USERNAME, password, roles. I tried to save BP.
    I got this error:
    Enter the Internet user
    Message no. R11214
    You have maintained attributes (logon data, roles and/or fixed values) for the Internet user, without having entered the Internet user itself.
    But,
    Field 'INTERNETUSER' is not changeble.
    Denis.

    Hi, DJ
    Thank you for answer)
    1. Have you saved the BP. If Yes, just see if the INTERNET USER maintained is available in SU01.
    Yes, but I can not see  INTERNET USER in the BP.
    2. If you are not able to assign the INTERNET USER, please try to maintain the INTERNET USER in BP.
    I can not do it, because I can not change field INTERNET USER
    3. If the INTERNET USER field is not available, just check the authorization for the same.
    I has all authorization: sap_all.
    Denis

  • Problem when creating business partner

    Dear Expert,
    I have a problem when creating business partner from T-code BP
    I can't input vendor number in company code header data
    The vendor account field is set to required entry.
    When create business partner, I make some entry like :
    Business partner category : organization
    BP Role                           : Landlord with vendor account
    Grouping                          : external number assignment
    Company Code                 : 1000
    The problem is everytime i try to input vendor number, it always failed.
    The Vendor account field always display ' <external> '
    It's strange.. the vendor field it's seem locked by grouping
    What should I do?? 
    ___Company Code Header Data___
    Company Code  :   1000
    Customer          :   <external>
    Vendor              :   <external>
    I need your advise.. thank you very much
    Thanks,
    tweety

    Hi,
    I would like to suggest you some SAP notes that contain useful information aobut customer-vender intergration of ERP2005.
    956054  BP_CVI Customer-vendor integration as of ERP2005 (ECC600)
    This notes describes the changes (new development) of CVI AND the necessary customizing settings.
    In short, CVI is now bidirectional.
    1. BP -> Customer/Vendor: it depends on the roletype configuration, if a customer/vender is created.
    2. Customer/Vendor -> BP: it depends on the account group if a BP is created.
    Data is changed then synchronoously.
    Further notes that might be of interest.
    851445 BP_CVI: Details about reports to be executed for ERP 2005
    727205 Conversion of industry Customizing in BUPXPRA12
    1077616 Business Partner Upgrade FAQ
    If you have further questions please let me know.
    Regards, Franz

  • SLG1 error while creating Business Partner

    Hi,
    Im currently working on SRM 7.0 and keep receiving the following errors in SLG1. Can you kindly advise what might be the root cause for the below errors so ican fix the issue and ensure the same error doesnt pop up going further?
    Error type 1:
    Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXX
    The region 00 is not defined for country DE
    Error type 2:
    Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
    The transport zone ZOC0000001 is not defined for country YY
    Error type 3:
    Error:Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
    Email address "whatever email" is invalid
    Appreciate your feedback
    Akshay

    Hello Akshay,
    Resolution for Isuue 1:
    SAP Web Application Server -> General Settings -> Set Countries -> Insert Regions or Define Country Codes
    Region for country DE is not maintained in SPRO or bad data.
    Resolution for Issue 2:
    SAP Web Application Server - Application Server - Basis Services - Address Management - Maintain Transport Zones
    Maintain the transport zones in SRM.
    Resolution for Issue 3:
    email address should be a valid address. SRM checks the format e.g. xx @ yy . zzz
    I believe error could be due to incorrect data.
    Hope this solves.
    Ashutosh

  • How to create Business Partner in CRM 2007

    Hi gurus!! how are you? I´m a rooky to sap crm and I would like your help and guidance to know how can I create a Business Partners and Roles.
    Whatever detailed help or documentation you may give me will be rewarded =)
    Thanks a lot in advanced!!!
    Lorena.

    Hello!
    In the WebUI there are different Business Partner Types (Person, Organization, Group).
    From user perspective you can differentiate between:
    - Corporate Account (Organization)
    - Individual Account (Person)
    - Group Account (Group)
    - Employee (Person)
    - Contact Person (Relationship) (Person)
    All these Business Partner have an own Overview-Page. Usually you can create the Business Partner starting from the related Search-Result-List (by default the new-button is not available for Employees as a Sales Rep usually doesnu2019t create new Employees u2026).
    You can assign Business Partner Roles to these Business Partners (there is an own Assignment-Block within every Overview-Page of a Business Partner). Some roles will also get assigned automatically, if you create this Business Partner.
    However it is possible to assign multiple roles to the Business Partner. Itu2019s also possible to have different Views of one Business Partner. E. g. an Individual Account can also be a Contact Person for another Account. But here it is not the Role determining the View it is the Contact Person Relationship doing this.
    The Role itself also has an impact on the UI of the Business Partner as dependent on the Roles some Assignment-Blocks are displayed or not.
    I hope this was not confusing u2026
    Best regards
    Arno

  • Part 2: Flat files and Business Contents: Any issues with this scenario?

    I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
    1.
    " ...you’d better analyze those cubes for data redundancy and presence of data you’ll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
    2.
    "If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
    3.
    I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
    If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
    4.
    "Consider carefully the ODS’ key fields selection. Their combination should not allow data aggregation that you don’t need."
    I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
    Thanks in advance

    Hallo
    I try to give some exaplanation based on the previous answer.
    1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
    2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
    Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
    3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
    4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
    for example: customer - product - Distr Chan - Sell Price
    if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
    I hope eveyrhting is clear
    Regards
    Mike

  • Getting a "Business partner not found with partner function type requester"

    Hi There,
    After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
    Please help mas this is an urgent issue.
    Thanks,
    Grace

    Hi Grace,
    First check :
    1- transaction : CRM_OM_BP_INTEGRATE
    select org structure where your user is and check that you have green lights (no missing address....)
    2- Run transaction USERS_GEN
    Select check user
    Is everything correct or does the user need to be repaired ?
    Kind regards,
    Yann

  • No users available in the change period (Create Business Partner)

    Hello!
    I would like to set up the business partners for Service Desk.
    If I choose the solution and execute "Edit --> Create Business partner"
    no useres are shown under the system.
    If I change the data selection for an earlier time or blank, the situation does not change, meanwile I have enough users in the satelite systems.
    How can this problem be solved?
    Should the user have special autzorizations?
    Thank you very much!
    regards
    Thom

    Hello!
    Thank you for your response.
    Unfortunately it does not connection with adding some roles to all the users in the satelite systems.
    I have done this, but without success.
    <b>Has someone other information how to see the users from satelite systems in Solution Manager for assigning them to the business partners?</b>
    (I have SAP R/3 Enterpeise 4.7)
    What very strange is: for the local Solution Manger all the users are shown.
    Thank you!
    regards

  • Messagw while trying to create Business partner (BP) object for Recruiter

    Hi,
    We have upgraded E-Recruitment from EHp2 to EHP4.
    When I tried to access Recruiter dash board through recruiter ID, I got error "You are not authorized to see this". After checking it is found that business partner object is not created for Recruiter ID. So tried to create through program RCF_Create_user. But while running this report, I am getting message like "candidate number is already exist" and I am not able to proced further. I checked relationship A650, also table HRP5102 for candidate details for this Recruiter personeel number. But no where it is available.
    Could anybody please tell how to proceed on this? Where to see candidate details for an employee? How to delete candidate details if exists so that I can create business partner object again via program RCF_create_user.
    Anybody's help is appreciated.
    Regards,
    Purnima

    Hello Purnima,
    as you started from an authorization error message, have you tried to assign SAP_ALL to the user and check if the application was working? Did you regenerated SAP_ALL after the upgrade as otherwise the authorization for the new application might still be missing.
    I first thought the BP relation was missing after your upgrade but in your 2nd post you said you deleted CP-BP relation among others. Was this a typo or was the relation existing but the business partner missing. This would be very suprising as it is not that easy to get rid of one.
    It is very strange if RCF_CREATE_USER is still not working after deleting all relations. If you only deleted one relation from CP it might be necessary to delete the other direction for all objects being internal. BUT be aware! Changing HRP1001 data this way will lead to inconsistencies in the system.
    The only additional thing which comes to my mind is the integrated installation. Here the user for the candidate is not read from HRP1001 but directly from the PA infotype 0105. So there might be another candidate joined to the user this way if you use an integrated landscape.
    But before you start changing hrp1001 by hand please always get the CP id for the candidate, go to SE80, open class cl_hrrcf_candidate and test the get method. (you need the cp id as you have to enter the first id on the method test screen, the others won't work due to the usage of "is supplied" in the method combined with the methgod tester). In the result check if there is really no BP Id resolved.
    If the relation or the bp object really got lost during the upgrade, I'd check if this is a single case or more candidates were effected. If so I'd in every case get in contact w/ sap suppport.
    Kind Regards
    Roman
    Edited by: Roman Weise on Mar 14, 2010 6:43 PM

  • FM for create Business partner.

    hii,
    i have the following code to create business partner.
    when i execute the code and enter the required data it gets executes successfully but i cannot see the created bp or partner-group or bp role in tcode bp.
    <removed by moderator>
    Moderator message: please post relevant code parts only, stay under 5000 characters total to preserve formatting.
    Edited by: Thomas Zloch on Jan 17, 2011 11:19 AM

    hii gemini,
    i went through the same pdf for creating bp, but when i click on save a short dump is generated.
    which is as follows :
       The current ABAP program "SAPLBUSS" had to be terminated because it has
       come across a statement that unfortunately cannot be executed.
       The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
        include "LCACS_BU_PARTNERU44 " in
       line 19:
       "The key of internal table "LT_BUT0BK" contains components of type "X" "
       "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
       "r such tables in a Unicode context."
       The include has been created and last changed by:
       Created by: "SAP "
       Last changed by: "SAP "
       Error in the ABAP Application Program
       The current ABAP program "SAPLBUSS" had to be terminated because it has
       come across a statement that unfortunately cannot be executed.
    rror analysis
       The following syntax error was found in the program SAPLCACS_BU_PARTNER :
       "The key of internal table "LT_BUT0BK" contains components of type "X" "
       "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
       "r such tables in a Unicode context."
    regards,
    akshay ruia

  • Create Business Partner - Dump

    Dear All,
    When I try to create business partner with transaction code BP, I got ABAP Programming Error, The ASSERT condition was violated.
    I use SAP standard business partner role UKM000. When I click credit profile tab, I get this dump. What may be the reason?
    BR

    Hi London,
    Firstly have you created the BP in General Role?
    Then you have tried to create it in UKM000 role?
    Also please check ST22... ASSERT condition can be because of different reason, analysis of ST22 message will give you more detail.l

Maybe you are looking for