Create datasource in SAP Netweaver (SP15)

Hi:
we need to create a datasource in SAP Netweaver (SP15).
This datasource is an Oracle Database placed in a different host.
From the Visual Administrator we have accessed to :
Server - Services - JDBC Connector
In tab Runtime I have set the following parameters:
Driver Name : SYSTEM_DRIVER
JDBC Version: 1.x (no XA support)
Driver Class: com.sap.portal.jdbcdrivers.P9oracle.jar
Database URL: jdbc:Oracle://hostname/SID
User: <oracle user>
Password: <password oracle user>
Anyone can say me if it is necessary anything more or if one of those parameters is bad?
Thanks

Hi Jose,
Follow the Document to complete the list.
http://help.sap.com/saphelp_webas630/helpdata/en/ab/082484173ae045ab8dad8a41d33da3/content.htm
The Parametrs you give fulfill the Parameter List to be given.Have you tested on it.
Regards,
Raja Akella

Similar Messages

Database folder is not created while installing sap netweaver 7.01

Hello,
i am trying to install sap netweaver on my laptop, but i am facing a problem while installing it.
installation gets completed within few minutes and even no databse folder is being created in the drive.
when i try to start the the application server a error message appears
"service name is invalid,
more help is available by typing NET HELPMSG 2185
start database failed"
suggest me a solution please.
is it so because before running the main setup, i installed the maxdb seprately and then later i uninstalled it before running the main setup??
laptop configuration
ram 1 gb, installing in e:,java version latest.
Regards,
Umesh

hello.
thanks you all for replies.
i have installed a fresh window finally to install sap netweaver abap trial version.
windows xp service pack 2.
jre1.4.1_07
and finally i am getting a following error log.
(Sep 18, 2010 3:16:09 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 18, 2010 3:16:09 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 18, 2010 3:16:19 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 18, 2010 3:16:19 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 18, 2010 3:16:29 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 18, 2010 3:16:29 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 18, 2010 3:16:39 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 18, 2010 3:16:39 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 18, 2010 3:16:49 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 18, 2010 3:16:49 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 18, 2010 3:16:59 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 18, 2010 3:16:59 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 18, 2010 3:17:09 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file e:\SAP\NSP\log.txt for details.
(Sep 18, 2010 3:17:09 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
     at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(Sep 18, 2010 3:17:15 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file e:\SAP\NSP\log.txt for details.
(Sep 18, 2010 3:17:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
please help.

Problem creating database with SAP Netweaver 7 sp 12

Hello all,
I have retrieved a new license from the website.
The problem that I now have is that when I try to create a table, I am prompted for an access key. I input the developer access key (29671482393151224771) and it doesn't work.
Please, does anybody know how I can remedy this?
Thanks.

hi henry,
you cannot modify the standard sap tables and if the prefix does not start with Y or Z..it will ask for access key ...so while creating a table add Y or Z to the table name...
not only for table name but also for classess,programs,screens etc..
thanks
jaideep
<b><REMOVED BY MODERATOR></b>
plz close the thread if it is answered..
Message was edited by:
Alvaro Tejada Galindo

Create request at SAP Netweaver Developer Studio

Hi all,
How can I create and transport requests at SAP NDS?
Thank you all,
Ricardo

Ricardo,
I may not be understanding your question correctly, but here is the section of the [manual|http://help.sap.com/saphelp_nw70/helpdata/EN/23/445602467f6d4395b4ef86cd3265c1/frameset.htm] for the transport studio. If you are a bit more specific regarding what you want to accomplish, I will try to give more assistance.
-Zach

Creating Datasource and Extracting from SAP R/3 ECC 6.0

Hello Gurus,
I am very new in BI field, I am learning through notes provided in this Blog.
Curretnly I need to know how we create Datasource at SAP R/3 ECC 6.0 (is there any difference b/t these?)
and how we may extract data from R/3 ECC 6.0 Source System.
Looking for your kind reply
Thanks in Advance
KK

You can use any specific Extractors to Create Data Source in R/3 side.
Let me explain with Generic Extraction
Goto SBIW--> you can see all the extractions here
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Info set Query
3. Based on Function module
If you would like to create a custom table, then goto SE11>Select Table>Click on Create (Now create you own table here & use this table while creating Transaction data)
Goto RS02-->Select Transaction data.
Click on Create
Choose an application component to which the data source is to be assigned
Click on Generic Delta
Specify the Delta-Specific and the type for the field.
Specify a safety interval
Select Data type>Save> Now Data source was generated successfully
After generating the data source , you will find Delta Flag checked.
Please go through the following link for Generic Delta
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Once you've done with Data Source in R/3 side--> u need to Replicate it to BI
Goto RSA1>source system>Select the Source system in which u've created Data source>R.C select Data Source Overview>Select the Application Component to which Data source is assigned>R.C Select Replicate dataSorce>here you can see your NEW Data source
Hope it helps!

SAP NetWeaver 7.2 (SDN-Edu) with Oracle Database

Hi there,
I have download the SAP NetWeaver 7.2 from SDN (Trial-Version). So far, the installation went good with MaxDB. But how I can connect to an Oracle Database (11g Release 2)? Do I need to configure JDBC Driver, then customizable DataSource with all the parameter (host, username, password, sid etc.)?
Navigation in SAP NetWeaver Administration: Configuration Management --> infrastructure --> Application Resources
The installation of Oracle with creation a database is done. Both, SAP NetWeaver and Oracle are running on the same machine (localhost).
Many thanks for help,
Cengiz

hi spantaleoni, thanks for your anwer.
you mean something like that (code se below), without to configure a datasource on sap netweaver administration (please see my navigation steps above)?
public static Connection getOracleConnection() throws Exception {
    String driver = "oracle.jdbc.driver.OracleDriver";
    String url = "jdbc:oracle:thin:@localhost:1521:SID";
    String username = "username";
    String password = "password";
    Class.forName(driver); // load Oracle driver
    Connection conn = DriverManager.getConnection(url, username, password);
    return conn;
thanks again,
cengiz

SAP NetWeaver Developer Studio Support Portlet Development

Hi Everybody,
Do we create portlet with SAP NetWeaver Developer Studio SAP. NetWeaver Application Server, Java(TM) EE 5 Edition support or it does not support Portled development.
Is there any portlet plug-in for NWDS to develop portlet.
Thank You
Syed Saifuddin

Hi Syed,
From your post I can understand that you want to use standard portlets in EP6. Unfortunately this is not supported in NetWeaver 04s which you are probably using because of EP6.
These portlets, that are compliant with JSR168, are supported in the next release NetWeaver CE 7.1 (JEE 5) and the portal that will be shipped with it.
However how to write a Hello World portlet you can learn from the following article: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/14b5d01e-0e01-0010-24aa-f12ee5940060
Regards,
Diyan

Problem installing SAP NetWeaver 04 - Full Java Edition SP15 - Step 22

Hi SDN Members,
I try to install the SAP NetWeaver 04 - Full Java Edition SP15 on my System (AMD Athlon X2 3800+ Dual Core with 1 GByte RAM). I've tried it several times but the Installation does not continue after Step 22 - Load Java Database Content. In the Logfile C:\Programme\sapinst_instdir\NW04SR1\WEBAS_COPY\ONE_HOST\jload.log I see this:
31.12.05 14:25:34 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIG
31.12.05 14:25:35 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIG created
31.12.05 14:25:45 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIG loaded (13144 rows)
31.12.05 14:25:45 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIGENTRY
31.12.05 14:25:45 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIGENTRY created
This are the last entries. After this step java.exe uses still 50 % of CPU but nothing happens in kernel.exe. I let the installation run 22 hours but nothing changed.
Is there anyone out there with the same problem and a solution?
Regards
Gregor
Message was edited by: Gregor Wolf
Correction: It is SP15

Hi All,
I got installed successfully on Windows2003 Server without any issues.
But just was looking into the log file, i found these errors.Can anybody tell me why these are occured and these can be stop working with portals at any stage??
Thanks a lot,
Venkat
INFO[E] 2006-01-03 01:44:43
Unable to get value for environment variable JAVA_HOME.
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
INFO 2006-01-03 01:24:11
Stopping SAP system services for J2E.
ERROR 2006-01-03 01:24:11
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPOsCol).
ERROR 2006-01-03 01:24:41
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_01).
ERROR 2006-01-03 01:24:41
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_01).
ERROR 2006-01-03 01:24:41
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_00).
ERROR 2006-01-03 01:24:41
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_00).
INFO 2006-01-03 01:25:07
Switched to user: j2eadm.
ERROR 2006-01-03 01:25:07
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPOsCol).
Info: No action: Selected development component 'IAIKSecurityFS'/'sap.com'/'SAP AG'/'1.3.12' will not update currently deployed development component 'IAIKSecurityFS'/'sap.com'/'SAP AG'/'1.3.12'.
Error: All selected SDAs and SCAs have already been deployed before.
Error: -
Prerequisites were aborted -
Error: All selected SDAs and SCAs have already been deployed before.
Info: Summarizing the deployment results:
Info: Already deployed: C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\ONE_HOST\crypto.sda
Processing error. Return code: 104
Error: Processing error. Return code: 104

How to create web service for a Java class in SAP NetWeaver Studio

hi all,
i am using SAP Netweaver Developer Studio.have created a normal java project and i want to create web service for one of the classes in this project. i used the Web Service Creation Wizard to create a web service for this class. but it says there's no methods available for VI. all my methods in this class are public, what should i do?

Hi,
I guess there are other ways. But this is an easy way, if you find the right wizards.
Besides this it is good practise to define interface methods so that session bean implement these interface methods, and thus seperate the interface from the implementation.
In this approach you will need 3 projects:
An enterprise application project (will contain EJB Module)
An EJB Module project (will contain session bean)
A Java project (contains code that implements the session bean methods)
In my previous post I suggested to use a J2EE web mudule project. This was a mistake, it should be EJB module.
But it should be possible to do it in another way. It is up to you.
Good luck, Roelof

Error while creating Pop-up window in SAP NetWeaver 7.1 CE SP10 PAT0001

Hi All,
   I am trying to create a pop-up in the SAP NetWeaver 7.1 CE SP10 PAT0001 and jdk1.6.0_21. I am trying to create a pop-up window using the "New Features of Web Dynpro Popup Window - SAP NetWeaver CE 7.11" Link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a04870c5-749b-2b10-06ba-d25515ef39e3&overridelayout=true
public void wdDoModifyView(com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
   if (firstTime)
        IWDWindowViewElement window = (IWDWindowViewElement) view.getRootElement();
It shows the collowing error " IWDWindowViewElement cannot be resolved as type". I am using the latest version of NW CE and jdk but still i am unable to find the "IWDWindowViewElement".
I have gone through a similar thread talking abt the same problem but it did not help. (Web Dynpro Popup Window Error in SAP Netweaver CE 7.11)
Can anybody help me with this?

Hi,
I think the problem is rather the following:
The guide says:
"How to create a popup with the new feature mentioned above?
Before starting you should check the version of your NWDS. This can be done in NWDS: u201CHelpu201D -> u201CAbout SAP NetWeaver Developer Studiou201D. The version information should look similar to the text below:
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 EhP 1 SP00 PAT0000"
I tried the same guide on 720 and there the interface IWDWindowViewElement is available.
So again, the problem is this:
have the SAP NetWeaver 7.1 Composition Environment SP10 PAT0001
This means you have 710 (SP10 PAT1)
The guide says you need EHP1 at least
SAP NetWeaver 7.1 EhP 1 SP00 PAT0000
This means 711 (SP00 PAT0)
Best Regards,
Ervin

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

Steps to create a generic datasource from SAP CRM

Dear Forum,
Could you please provide me with the steps to create a generic datasource from SAP CRM
Thanks for you time and efforts
Regards,

Hi,
Initially create a view or identify the table to create generic extractions, remaining process is same in all data bases such as CRM........
GENERIC EXTARCTIONS:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/generic%2bextraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Generic Delta:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Assign points if these are useful.
Rgs,
I.R.K

SAP Netweaver ABAP 7.01 Trial - Error - could not create dir:L:\sapdb

Dear,
I am evaluating SAP....Installing SAP Netweaver ABAP 7.01 Trial. I am getting following error. Please help.
Quote:
> Subprocess starts at 20100720115554
Execute Command : F:\sapdb\programs\pgm\dbmcli.exe -n rajnish -d NSP -u CONTROL,******** db_online
Execute Session Command : exit
> Subprocess stops at 20100720115554
> Subprocess call failed
ERR
-24993,ERR_RTEEXT: Runtime environment error
1,could not create dir:L:\sapdb
3,The system cannot find the path specified.
UnQuote

Hi Mahendra,
Thanks for quick response.
Please find below the log. I tried changing the drive assignment of partition to L, I am getting following log and the installation terminates.
Please help.
> Subprocess starts at 20100720142743
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142743
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142743
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142743
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -R H:\sapdb\NSP\db dbm_version
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
VERSION    = 7.7.07
BUILD      = DBMServer 7.7.07   Build 016-123-231-153
OS         = WIN32
INSTROOT   = H:\sapdb\NSP\db
LOGON      = True
CODE       = UTF8
SWAP       = full
UNICODE    = YES
INSTANCE   = (unknown)
SYSNAME    = Windows Server 2003 family
MASKING    = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = H:\sapdb\data\wrk
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142747
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142747
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142747
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142748
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142750
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142750
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143126
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143309
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143309
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143309
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143310
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143310
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143310
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143311
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143311
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143413
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143413
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
regards.
Rajneesh

SAP Netweaver Developer Studio - Creating new par project

Hi,
I am currently experiencing some trouble trying to create a par project within the Netweaver Developer's studio, in the dialog for a creation of a new project 'Portal Application' is not available for selection based on the instructions from the following link(http://help.sap.com/erp2005_ehp_04/helpdata/EN/a3/918340d990ce62e10000000a155106/frameset.htm). Could someone please advise on whether any additional plugin's will have to be deployed and how.
Thanks in advance.
Robert

Hi Robert,
are there any other perspectives available like for instance Webdynpro, Development configuration, Design Time Repositoty?
I ask it only because if you install NWDS, then first you get a framework only, and the plugins must be installed explicitly using the updatesite.
Could you please confirm that you have executed this step?
You can trigger the update from the NWDS menu: "Help" -- "Software Updates" -- "Find and Install..." (take the second
option, "Search for new features to install").
I've tested with "SAP NetWeaver 7.1 Composition Environment SP08 PAT0000" and there the portal project option is available.
As a workaround you can make a try to install this -- or the latest -- version, you can get this software from here:
https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/ --> See the link here:
https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/NWDS_platform.html
Best Regards,
Ervin
Edited by: Ervin Szolke on Sep 6, 2010 6:41 PM

Unable to create a Relational Connection to SAP Netweaver BW Infoprovider

Hi Experts,
I'm tring to create a relational connection to SAP Netweaver BW Infoprovider: Information Design Tool
And have mentioned all the parameters needed for the connection correctly.
Current version is BW 7.4 and IDT 4.1
But m getting the error which is returning from the host due to failed RFC Connection which I have not understood.
Please guide me how to resolve this error and what is the reason behind this error. .
Kindly see the attached file of error.
Your answers will be helpfull.
Thanks & Regards,
Shruti

Hi,
Check the attached wiki link to setup RFC connection.If this not already setup then ask your basis team to setup RFC connection.Before creating the IDT connection test the RFC connection in sm59.
SAP BW With RFC JCO Connections In Information Design Tool - Business Intelligence (BusinessObjects) - SCN Wiki
if you set the manual call back then add higlighted parameters in the IDT connection.
Amit

Create datasource in SAP Netweaver (SP15)

Similar Messages

Maybe you are looking for