Create document to change colour of certain graphics using own colour palette

I want to create a flash document that allows me to change the colous of an image using a colour palette of my own. I am a complete beginner and have no idea where to start this, hence i would need to know what to do and how to do it.
I basically want the image to be a simple 2d image that i will create using different layers in photoshop and import them into flash, the layer images will all be one colour so the colour of the whole layer changes.
so the colour palette will be on the side of this and when i click on an image and then a colour the image changes to the colour i clicked.
I know how i have explained this is a bit hard to understanbd but any help is greatly appreciated.
Thank You

the document is not for me to use but for me to give to a large group of peopleand they will themselves select their own colours, i want to be able to intergrate my own colour palette into it which will have hundereds of colours....very similar to a room planner kind of thing, where you select a colour and the object you selected changes to that colour, but i need it for somthing else.

Similar Messages

Error in creating Document versions

Hi All,
I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new document versions.
I create a document with functional location and specify the mpd cycle. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 001 is copied to the 000 version.
The document is inconsistent where versioning of document doesnot work properly.
The problem which i found was the document identification guid remains the same for all the document versions getting created.The last documet version value is stored in the all the previous document versions.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

Hi,
Sorry instead of specifying as 2 characters by mistake i typed as 3 character field in the forum. I have maintained only two characters.
I have posted the same question in
SAP Community Network Forums » ABAP Development » ABAP, General
The forum link for your reference is
I have resolved the issue myself. I have replied with answer for the above question.
Below is the solution for my issue
There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
** IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

Help! How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?

I am a new Indesign user and I have been working with GIMP for the last year creating single colour print-ready PDFs. But now I need to create a document with a FOGRA27 CMYK colour profile and a resolution of at least
How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?
I can import the PDF by creating a new document and finding the PDF in places, but it's bad quality.
The only colour profile I can find under View - Proof Setup is FOGRA39, but I need FOGRA27!
Help help help, I need to get these files printed in two days!
Thanks so much..
xx

Proof Colors doesn't change the file's color management, it just lets you see what the color values would look like if they are printed unchanged on different output devices. If you want to actually convert the color from one CMYK space to another, it's probably better to do that in Acrobat—Tools>Print Production>Convert Colors.
There's very little difference between Fogra27 and Fogra39—Fogra27 allows more total ink 350 vs. 330.
There's nothing you can do to improve the quality of low res images

Colour changes when importing Illustrator graphics into Flash CS3

Hi there!
I'm creating a Flash site, and all the graphics are imported
from Illustrator.
Also, in the Illustrator file, there are some Phtoshop
graphics with shadow effects on it.
The problem is, that when I import the .ai into Flash, a
pretty strong colour change occurs: everything becomes lighter. And
the shadow, wich is black in Photoshop, turns white in Flash!
Is there a way to solve this problem? I searched the net, and
some people say it's an OSX thing, wich is pretty strange, because
Mac is an obvious choice for loads of designers.
I've attached an image preview.
Preview
Thanks in advance!
Alex

Thanks for the anwsers!
However, the weird thing is, when I pick one of the photoshop
graphics, asign the profile to it, and import it into Flash, the
colors look fairly good. BUT when I import the complete Illustrator
file with alle the graphics in it, I still get the color shift. I
can now put all the graphics in the flash file, one at a time, but
I think thats not the most easy way to do it..

Change the colour of Canvas graphics on runtime

Hi,
can someone tell me hoe to change the colour of canvas graphics like rectangle on runtime, like set_item_property is not working for these items
Thanks

try this
set_canvas_property('canvas2',background_color,'r110g50b22');
Pradhyumn

My iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud.

my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud. Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
Most recent version of mountain lion updated over a month ago. New iPad in use for over a month.
thanks

The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!

How to create or update 'change document' for crm order

Hi all,
i want to create or update change document records via program . And which method could be used (FM or ...) ?
I find there is a fm 'CRM_ORDER_WRITE_DOCUMENT' . But seems not available?
any good idea ?
BR.

Hello
You can refer to FM:CRM_ORDER_CHANGE_DOCS_CREATE. In this FM, the change documents are set.
But I don't recommend to create or change standard change document by your own logic because of view of the internal control. Changing the change document by user own logic has possibility to make the falsification.
Regards,
Masayuki

I would like to design a poster, when I place my photos on the page under the "links" "colour space" section it says the colour space is RGB not CMYK even though my document is set up as CMYK. Can/do i need to change this? i am worried it will be a pro

I would like to design a poster, when I place my photos on the page
under the "links" "colour space" section it says the colour space is RGB not CMYK even though my document is set up as CMYK. Can/do i need to change this? i am worried it will be a problem when my poster goes to the commercial printers who want CMYK

Yes, it will be a problem. Convert the images in Photoshop using the printer's color profiles or a standard CMYK profile.
Mylenium

Created documents: changing default permissions

We have a shared server in which we share documents, but for several of us, our documents always have "read only" permissions automatically set to them. Changing them one at a time is a pain.
Is there any way that when documents are saved (InDesign, Quark, etc.), that they can have automatic Read & Write permissions set to them without having to do the whole "get info" thing?
Thanks for any info. - j

There isn't anything for Apple to get involved in - the file permissions are working as they are designed. It is up to the owner of the document to change the permissions of their documents (they own them, after all). Setting the group to "everyone" or the permissions for "others" to read/write will allow others to read and write the file. If you want some kind of automation, then perhaps a folder action script will do what you want:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into the Script Editor">
on adding folder items to ThisFolder after receiving AddedItems
repeat with AnItem in AddedItems
tell application "Finder"
set everyones privileges of AnItem to read write
end tell
end repeat
end adding folder items to
</pre>
This folder action will set the permissions for "others" to read/write on every file dropped into the folder. Each user will need to attach the folder action to the Shared folder (attached actions are specific to the user), so it should be stored in a location accessible to everyone - perhaps /Library/Scripts/Folder Action Scripts.

Why do the colours from Adobe Color Theme creation change when I try to use them?

I've been exploring the Adobe Color Theme creator in InDesign. There are the three tabs: Create, Explore, My Themes. In the create tab I can create a theme of colours, get the combination just right, and then save my new theme. However as soon as I save any colour out to the swatches, the colour changes! It's driving me nuts.
[Original Colour] -Colour it comes out as-
[green turquoise] -prussian blue-
[strong, bright red] -darkish orange-
[warm purple] -faded dark mauve-
My best guess was that maybe the colour profile of the document was set to CMYK and that the colour themes work in RGB, but as far as I can determine it's just "North America General Purpose 2" and the Working Spaces include both RGB and CMYK. Therefore I'm stumped. I do not have the expertise to figure out what is going on and these are significant colour changes to have a really strong, vibrant colour palette turn into something much more muted.
And if this piece of information is of any use, my yellow doesn't seem to change at all.
Any ideas please? I've tried searching for it, but maybe I'm not putting in the right combination of keywords. Hopefully I'm just being obtuse and someone will tell me to put a checkmark in a box somewhere.

There are some slight value changes between the Theme and the Swatches, but we're only talking a change of 1 or 2 and so the colours appear to stay true now. Total pain to have to do this extra little step every time. =)
a huge, glaring, and sloppy problem which really ought to be fixed by Adobe pronto.
You can batch change the color mode of swatches if you select all of the swatches and double click them. Or, you can simply leave the Lab values and let the conversion to the correct CMYK space happen when you export to PDF.
I'm guessing the fix won't be coming soon. The original Kuler app had the same color management problem. It's hard to see how they will fix it and keep Color Themes as a cloud based web app.
When you convert the Lab swatches the CMYK values you get will depend on the document's assigned profile, so if you make two document's with different profiles assigned you'll get different CMYK values when you convert the Lab values. Here is US SWOP vs US SNAP
Newsprint
SWOP

Workflow created documents gets error "File ... cannot be opened because there are problems with the contents"

I have a list that when an item is changed a workflow kicks in and checks if certain fields are checked. Depending on which field word and excel documents are created in another document library.
Now this worked perfectly in my Sharepoint 2010 environment, but after moving the site to Sharepoint 2013 this particular workflow doesn't seem to work anymore.
I've tried to create the whole thing from scratch but still the same issue.
The issue is the same even if using the default content type, or trying to open the document using Explorer view. I've also tried recreating the function in a different site without 2013s visual upgrade without any luck. It's like something have changed
in the architecture.
So does anyone have an idea to why workflow created documents don't work anymore?

I don't think the issue lies with SharePoint. Do you still have your 2010 environment around so that you can test and see if the issue appears? Seems to me that the Word global template has got corrupted. I have faced this issue in the past but that was
under entirely different circumstances. Anyhow, I renamed the normal.dotm file and it helped resolve my issue. I am not 100% sure if it will work for you as well, if you want you can give it a try.
Refer to the below link:
http://support.microsoft.com/kb/918429
Exit Word.
Click Start
Collapse this imageExpand this image
In the Start Search box, type the following text, and then press ENTER:
%userprofile%\appdata\roaming\microsoft\templates
Right-click Normal.dotm, and then click
Rename.
Type Oldword.old, and then press ENTER.
Close Windows Explorer.
Start Word, and then open the document

In the old Numbers I could change the colour of a checkbox using rules - I cannot seem to do this in new Numbers 2013?

In the old Numbers I could change the colour of a checkbox using rules - I cannot seem to do this in new Numbers 2013?
I have an old Numbers sheet where I could make the checkbox Cell go Green when ticking "Equal to" TRUE. When I open the old sheet it into new iWork it functions correctly. But I am unable to copy or paste the rule - nor recreate it.
Any suggestions on how to create a Conditional checkbox cell that goes green once ticked would be most apprecicated.
Thanks - Steve

Numbers 3.0 is missing the logic-based "equal to TRUE" or "equal to FALSE" conditions for conditional formatting. The replacement is text based: "text is TRUE" or "text is FALSE". You can apply these rules to cells formatted as checkboxes.

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?
What do I need to do to bring the graphics and exhibits from the PDF file to the Word file?

Hi jackp52432917,
How was that PDF file created? Please see Will Adobe ExportPDF convert both text and form... | Adobe Community
It could be that the PDF file you're converting was created using a third-party application, and it doesn't contain all the information necessary to ensure a clean conversion. Have you had similar troubles converting other PDF files?
Best,
Sara

PSM-FM-Reversal of funds management document after change in acc.assignment

Good day we recently went live with a component of Funds Management i.e. Availability Control on Cost centers and cost elements. We update BCS with the plan values and actual/commitment items in Finance/CO. We do our planning in CO.
The solution is working reasonably well but we have encountered a problem for which we are unable to find a solution. The problem is best illustrated with an example;
1. Create purchase requisition with Account Assignment Category "K" = Cost Center with transaction ME51N
2. Account assignment = cost center and cost element. A funds management document is created upon saving of the transaction.
3. Purchase Req. is released with a release strategy (transaction ME54N)
4. After purchase requisition release the account assignment for the cost element is changed by the user. This occurs sometimes during the execution of the business process.
5. When a purchase order is created with reference to this purchase requisition with transaction ME59N the system references the original funds management document which means when the account assignment was changed the funds management document was not reversed and a new funds management document created for the changed account assignment.
6. The BUDCON report transaction FMRP_RW_BUDCON thus displays the commitment under the incorrect commitment item as the change in account assignment is not reflected in Funds Management. We have a one to one relationship between cost elements/commitment items and cost centers/funds centers as per the derivation strategy.
My question is;
Is this normal standard SAP standard behavior or are we missing some configuration that will enable the creation of a new funds management document and if so where do we configure such? I must mention our solution is completely SAP standard.
Thank you in advance.
Best Regards
Mike Olwagen
Manager SAP Solution Support
City Power (JHB) (Pty) Ltd

Hi Mike, nice to meet you.
I think u should do an entire test with TRACE on, and u will find the problem, and how to fix it (at FMDERIVE of course).
First: Have a look at note [666322|https://service.sap.com/sap/support/notes/666322], go to FMDERIVE and turn ON the trace.
Then, run all the process ... from ME51N to the end...
I agree with Eli, u must allow overwriting of existing values at FMDERIVE rule...
Regards,
Osvaldo.

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4 I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4
I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their font spacing! which distorts the look of the Text that was written, by oevrlapping on other things that were put & present on the screen.. Another similar probelm is that the Vector shaped used for example to highlight certain words or shapes, also change their position on the screen so that they no longer highlight exact things that we once used these vectors to highlight or outline... Anyone knows how to solve this problem please?? I made sure that the same fonts are available in the Library in both old and newer computers...
thanks in advance..

You might want to take your question to the FCP forum - if you copied all fonts to your Library>Fonts folder and restarted they should be recognized by all applications. I know that this works for Adobe products, anyway.
Clinton

Create document to change colour of certain graphics using own colour palette

Similar Messages

Maybe you are looking for