Create Html Report in batch

Hi,
can anyone tell me if i can create html report in batch ?
how ?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Oded Raz ([email protected]):
Hi,
can anyone tell me if i can create html report in batch ?
how ?<HR></BLOCKQUOTE>
Yes....
Discoverer supports command line scheduling that may launch Discoverer, execute a report, and automatically export this in HTML format.
This is described in the Users Guide, under Advanced Features. (http://technet.oracle.com/docs/products/discoverer/doc_index.htm)
This is also described in technical note #44841.1 available on Oracle's Metalink (http://metalink.oracle.com).
The relevant command extension is:
/export <format> <export-file>
which Exports output with specified format (xls, html, etc) to specified output file.
null

Similar Messages

I Need to Create a report for batch jobs Based on Subject Area.

Hi SAP Guru's,
I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI).
Please help me in this issue ASAP.
Thanks in Advance.
Krishna.

You may need to activate some additional business content if not already installed but there are a lot BI statistics you can report on. Have a look at this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm

Batch file to html report generator:

I want to create reports based of the batch file that I run.
I created a batch file to run a number of programs for this PC tune up service that we do at the University I work at. This is mostly a "learn for my own benefit" project, but if it works and looks nice I would like to make it availible to
my co workers.
Here is what I have so far for the batch:
@echo off
:start
echo.
echo Do you need to install
echo Microsoft Antivirus?
echo Type y / n (lowercase)
set /p antivirus=
if %antivirus%== y goto msantivirus
if %antivirus%== n goto mbam
goto start
:msantivirus
echo ProgramFiles(x86) var:
if not defined ProgramFiles(x86) (
start mseinstall32.exe
else (
start mseinstall64.exe
:mbam
echo.
echo Do you need to install
echo Malwarebytes?
echo Type y / n (lowercase)
set /p malwarebytes=
if %malwarebytes%== y start mbam-setup-2.0.2.1012.exe
if %malwarebytes%== n goto cleaner
goto mbam
:cleaner
echo.
echo Do you need to install
echo CCleaner?
echo Type y / n (lowercase)
set /p CCleaner=
if %CCleaner%== y start start ccsetup416.exe
if %CCleaner%== n goto msconfig
goto cleaner
:msconfig
echo.
echo Do you need to run
echo MSCONFIG?
echo Type y / n (lowercase)
set /p microsoftconfig=
if %microsoftconfig%== y start msconfig
if %microsoftconfig%== n goto print
goto msconfig
:print
echo.
echo Do you want to print
echo a report?
echo Type y / n (lowercase)
set /p print=
if %print%== y start (i don't know what to do here)
if %print%== n goto done
goto done
:done
echo.
echo You have finished the Zonetech scan. Press any key to exit.
pause >null
Here is what I have for the HTML (its based of another site I made so there is some leftover stuff in it):
<!DOCTYPE html>
<html>
<head>
<title> Zone Tech Computer Health Form </title>
<meta name= "viewport" content="width=device-width, initial-scale=1.0">
<link href= "css/bootstrap.min.css" rel= "stylesheet">
<link href= "css/styles.css" rel= "stylesheet">
</head>
<body>
<div class="navbar navbar-inverse navbar-static-top">
<div class= "container">
<a href= "#" class= "navbar-brand"> BOISE STATE UNIVERSITY ZONE TECH</a>
<button class = "navbar-toggle" data-toggle = "collapse" data-target = ".navHeaderCollapse">
<span class = "icon-bar"> </span>
<span class = "icon-bar"> </span>
<span class = "icon-bar"> </span>
<span class = "icon-bar"> </span>
<span class = "icon-bar"> </span>
</button>
<div class= "collapse navbar-collapse navHeaderCollapse">
<ul class = "nav navbar-nav navbar-right">
<li class= "active"><a href = "#">Home</a></li>
<li><a href = "#">Blog <b class= "caret"></b></a></li>
<li class = "dropdown">
<a href = "#" class = "dropdown-toggle" data-toggle = "dropdown">Social Media</a>
<ul class = "dropdown-menu">
<li> <a href = "#">Twiter</a></li>
<li> <a href = "#">Facebook</a></li>
<li> <a href = "#">Google +</a></li>
<li> <a href = "#">Instagram</a></li>
</ul>
</li>
<li><a href = "#">About</a></li>
<li><a href = "#contact" data-toggle="modal" >Contact</a></li>
</ul>
</div>
</div>
</div>
<div class = "container text-center">
<div class ="jumbotron">
<h1> Computer Health Report</h1>
<img src="img/smallerbroncologo.png" />
</div>
</div>
<div class= "container" >
<div class = "row">
<div class = "col-md-3">
<h3><a href = "#">Virus Scan </a></h3>
<p>A Virus Scan checks your computer to see if any malicious software is present.</p>
<a href = "#" class = "btn btn-default" > read moe </a>
</div>
<div class = "col-md-3">
<h3><a href = "#">Adware Scan </a></h3>
<p>We check your computer for programs that may present themselves as legitimate services to "repair" your computer for money or sites that redirect your internet browser.</p>
<a href = "#" class = "btn btn-default" > read moe </a>
</div>
<div class = "col-md-3">
<h3><a href = "#">Registry Scan </a></h3>
<p>Sometimes programs you have installed don't uninstall right or fully. Othertimes your programs may stop working because there is wrong infomration in the registry. We clean and optimize the registry
to help make your computer work better</p>
<a href = "#" class = "btn btn-default" > read moe </a>
</div>
<div class = "col-md-3">
<h3><a href = "#">Start Up Scan </a></h3>
<p>If your computer is booting slowly, sometimes the cause is to many programs trying to start up when windows starts up. If to many programs try to start up at once it clogs up the computers processor and makes
it run slow. We check to make sure that only the essential programs are running so your computer runs better.</p>
<a href = "#" class = "btn btn-default" > read moe </a>
</div>
</div>
</div>
<div class = "navbar navbar-inverse navbar-fixed-bottom" >
<div class = "container" >
<p class = "navbar-text pull-left"> Site by Travis </p>
</div>
</div>
<div class = "modal fade" id = "contact" role = "dialog">
<div class = class "modal-dialog">
<div class = "modal-content">
<div class = "modal-header">
<p> Contact Tech Site </p>
</div>
<div class= "modal-body" >
<p>There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look even slightly believable. If you are
going to use a passage of Lorem Ipsum, you need to be sure there isn't anything embarrassing hidden in the middle of text. All the Lorem Ipsum generators on the Internet tend to repeat predefined chunks as necessary, making this the first true generator on
the Internet. It uses a dictionary of over 200 Latin words, combined with a handful of model sentence structures, to generate Lorem Ipsum which looks reasonable. The generated Lorem Ipsum is therefore always free from </p>
</div>
<div class = "footer">
<a class= "btn btn-default" data-dismiss = "modal" >close</a>
<a class= "btn btn-primary" data-dismiss = "modal" >close</a>
</div>
</div>
</div>
</div>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/latest/jquery.js"> </script>
<script src="js/bootstrap.js"> </script>
</body>
</html>
Here is what I want to do:
I want to make an interactive html report based on an HTML site I made. I want to take the y (meaning yes) inputs for the strings( anitivirus, malwarebytes, ccleaner, and Microsoftconfig which are from the batch) and make them indicate something has
been done on the HTML that I created. Essentially, I see the yes inputs putting check marks (or something) in the sections of my HTML document that are related to the programs I ran in the batch. The sections in the HTML page are called Virus Scan,
Adware Scan, Registry Scan, and Start up scan and they are paired to the variables antivirus, malwarebytes, ccleaner, and microsoftconfig.
I hope this makes sense.
Thanks for any help

This is the way I was looking at it. Essentially a html file is a text file. I have already written the html file I want to have displayed. I just want the batch to make a slight change to the text in part of it. If I could
do that I would be happy. Is there any way to do that with the batch?
Editing files never has been and is still not something that batch files do easily. I ti si not the intention of batch to do this.
If you are trying to learn something, try learn-ing something that is not obsolete. Batch is not worth the time when we have PowerShell, If you ant to alter an HTML dynamically then use an HTA. It is easy and well supported.
¯\_(ツ)_/¯

How to make Excel 2010 save a HTML report as a file without a folder created

We have a HTML report generated by Oracle Report with headers as below:
<html xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns="http://www.w3.org/TR/REC-html40">
In Excel 2010, after pressing the "save" button (not "save as"), it will by default save the report as web page format instead of xls, a folder "xxx.files" containing some css, xml and html files are created
in it. If user deletes the folder carelessly, the excel report cannot be viewed at all.
In Excel 2003, we can save it directly in its original format simply by pressing the "save" button, without creating a folder. May I know if there are any options in office 2010, macro or registries settings that can make
Excel 2010 to do the same as Excel 2003 when pressing the "save" button? Thanks!

Hi,
According to your description, you want a workaround to avoid creating a new folder when saving a html file in Excel 2010.
In my opinion, this issue is more related to the feature of HTML format or Excel 2010 application rather and I don't think we could resort to a macro or registry settings to avoid that. I suggest you posting it in
Excel IT pro forum for more effective responses.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

No batch session created for report RFUMSV50

if i execute the report RFUMSV50 for batch session, in sm35 no session is created.
when i first time ran, then batch was created. i have not changed anything in settings. after that
i posted 5 end to end cases from po to payment. now if i run report no batch session is created
where is the problem?
help please

Ok
But this report is not updating the records and no tax is transferred from interim tax account to final tax account. Also the output of the report is showing no value. It is blank.

[FlexPMD] flexpmd.html report created with zero bytes [Plz help]

hi folks,
initially i integrated FlexPMD with Maven.
when i tried to build it creates the following:
two folders:
* CSS --- contains css files
* Images --- contains image files
two files:
flexpmd.html -- created with zero bytes
pmd.xml -- it lists the violations.
my pom.xml
<plugin>
<groupId>com.adobe.ac</groupId>
<artifactId>flex-pmd-maven-plugin</artifactId>
<version>1.0.RC3</version>
<executions>
    <execution>
    <goals>
        <goal>check</goal>
    </goals>
    </execution>
</executions>
<configuration>
    <ruleSet>${basedir}/pmd-ruleset.xml</ruleSet>
    <outputDirectory>${basedir}/target/pmd</outputDirectory>
</configuration>
</plugin>
then i tried to integrate with Hudson, i configured this pmd.xml with hudson, its showing empty graph(see below)
could you tell me , why this flexpmd.html is generated with zero bytes and why i'm not able to see plotted graph
i tried the following version 1.0.RC4,1.0.RC5 and 1.1. but these versions also creating empty html report and some versions not running under hudson.
please provide the correct version and details to solve this issue.
please help in this issue, no help except this forum... i googled already did nt get any help.
correct me if i'm wrong.
thanks in advance.
Regards,
Mani

Hi,
What do you have in the console log?
Please, try with 1.1.
Xavier

Launch HTML Editor for creating webi reports - Java sdk

Is there a way to launch HTML editor directly for creating webi reports..I know we can set the preference for HTML report panel in infoview...but thats not the requirement. I have to launch the HTML or Java report panel editor according to the User selection on the fly....its a customized java code for webi reports.
Any help on this is appreciated!
Thanks
Chenthil

Guys will this link work to launch the HTML editor....
desktoplaunch/querywizard/jsp/entry.jsp?skin=skin_standard&docname=&docid=&isNew=true&isModified=&doctoken=we00010000b5d263b7d0a6&repotype=&unvname=&unvid=UnivCUID%3DAZu2kpoiudVOk35pUtr6.qQ%3BUnivName%3DKalvin&unvrepoid=&mode=C&decsep=.&unit=in&lang=en&doctype=wid&viewType=H&isModify=yes

Creating custom HTML reports

How can I create a custom HTML report in bi answers? I want to be able to pass in the results from a bi answers report to create a custom graph. I can use a static text field to implement an html graph, but I am unable to pass the values of the report output. Can I put the html in the "Column formula".
Thanks

Did you already try the narrative view?
regards
John
http://obiee101.blogspot.com

In TestStand How do you create a X vs Y graph in a HTML report

I need to create a graph that contains a log scale(db) on the Y-axis and measured frequency on the x-axis. The graph needs to be in the HTML report created in TestStand

Hi,
I used an example I download from NI website sometime ago. It uses TestStand 1.0.x and labview but it should give the mechcanism to achieve what you want.
use following link:- http://zone.ni.com/devzone/explprog.nsf/webmain/148128EC0AA49369862566D90012961C?opendocument&node=DZ52224_US
It TestStand 2.0, in the report options you can add graphs and tables a lot easier. See Example DisplayArrayInReport in the Example folder in your TestStand installation.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

How to create a report with selection screen that can run in background

Sorry to ask these basic questions but I am knew to ABAP Programming.
To keep it simply, I am attempting to create a report that has a simple parameter driven selections screen with one field. That field takes in a folder path from the user. The user executes the report. The report creates a simply BDC that goes into SE16, gathers data from a table, and exports the results to a text file using the folder path provided. I created a variant for the folder path field in the selection screen hoping to use it while executing the report in the background. The report is not exporting the file as it did when run in the foreground for some reason.
I am wondering what event is triggered when a report is executed in the background. In the foreground (or when I execute the program via SE38->Execute->With Variant) the user needs to execute the program by hitting the execute button once the variant has populated the folder path field. It works then, so I am trying to get the same to work in the background. I am thinking I didn't put the program together correctly to accommodate the running in the background. How can you create a report that can accept user input via variant into a selection screen and then run in the background?
Please, any information would be greatly appreciated.
Thanks you all for reading this!!!

Ok, finally I understand what you're doing. Initially you lost me with the SE16 reference...
Not sure what you're trying to achieve overall, but apart from the fact that you cannot export/download a file to a user's PC via background job (unless you have a mapped network share on the server or something like an FTP server on the user's PC, but both are pretty hypothetical scenarios and unlikely to occur).
Also, the BDC approach to get data via SE16 is pretty awkward. Note that SE16 is guarded by some authorization checks and often users won't have access in production (which might not matter if you intend to always run your program in background via dedicated batch user). However, I have no clue why you wouldn't want to use [open SQL|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_READING.htm] to read the data. You could then save it on the application server or if you really have to get it to the user you can consider e-mailing the file (extracts should be compressed before sending). For the latter you'll find plenty of references here, basically it's the [business communication services|http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/1c5d3aebba4c38e10000000a114084/frameset.htm] that you'd need to look at.

Performance issues when creating a Report / Query in Discoverer

Hi forum,
Hope you are can help, it involves a performance issues when creating a Report / Query.
I have a Discoverer Report that currently takes less than 5 seconds to run. After I add a condition to bring back Batch Status that = Posted we cancelled the query after reaching 20 minutes as this is way too long. If I remove the condition the query time goes back to less than 5 seconds.
Please see attached the SQL Inspector Plan:
Before Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
AND-EQUAL
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N2
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_N1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
After Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
TABLE ACCESS FULL GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX RANGE SCAN GL.GL_JE_HEADERS_N1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
INDEX UNIQUE SCAN GL.GL_CODE_COMBINATIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
Is there anything i can do in Discoverer Desktop / Administration to avoid this problem.
Many thanks,
Lance

Hi Rod,
I've tried the condition (Batch Status||'' = 'Posted') as you suggested, but the qeury time is still over 20 mins. To test i changed it to (Batch Status||'' = 'Unposted') and the query was returned within seconds again.
Ive been doing some more digging and have found the database view that is linked to the Journal Batches folder. See below.
I think the problem is with the column using DECODE. When querying the column in TOAD the value of P is returned. But in discoverer the condition is done on the value Posted. Im not too sure how DECODE works, but think this could be the causing some sort of issue with Full Table Scans. How do we get around this?
Lance
DECODE( JOURNAL_BATCH1.STATUS,
'+', 'Unable to validate or create CTA',
'+*', 'Was unable to validate or create CTA',
'-','Invalid or inactive rounding differences account in journal entry',
'-*', 'Modified invalid or inactive rounding differences account in journal entry',
'<', 'Showing sequence assignment failure',
'<*', 'Was showing sequence assignment failure',
'>', 'Showing cutoff rule violation',
'>*', 'Was showing cutoff rule violation',
'A', 'Journal batch failed funds reservation',
'A*', 'Journal batch previously failed funds reservation',
'AU', 'Showing batch with unopened period',
'B', 'Showing batch control total violation',
'B*', 'Was showing batch control total violation',
'BF', 'Showing batch with frozen or inactive budget',
'BU', 'Showing batch with unopened budget year',
'C', 'Showing unopened reporting period',
'C*', 'Was showing unopened reporting period',
'D', 'Selected for posting to an unopened period',
'D*', 'Was selected for posting to an unopened period',
'E', 'Showing no journal entries for this batch',
'E*', 'Was showing no journal entries for this batch',
'EU', 'Showing batch with unopened encumbrance year',
'F', 'Showing unopened reporting encumbrance year',
'F*', 'Was showing unopened reporting encumbrance year',
'G', 'Showing journal entry with invalid or inactive suspense account',
'G*', 'Was showing journal entry with invalid or inactive suspense account',
'H', 'Showing encumbrance journal entry with invalid or inactive reserve account',
'H*', 'Was showing encumbrance journal entry with invalid or inactive reserve account',
'I', 'In the process of being posted',
'J', 'Showing journal control total violation',
'J*', 'Was showing journal control total violation',
'K', 'Showing unbalanced intercompany journal entry',
'K*', 'Was showing unbalanced intercompany journal entry',
'L', 'Showing unbalanced journal entry by account category',
'L*', 'Was showing unbalanced journal entry by account category',
'M', 'Showing multiple problems preventing posting of batch',
'M*', 'Was showing multiple problems preventing posting of batch',
'N', 'Journal produced error during intercompany balance processing',
'N*', 'Journal produced error during intercompany balance processing',
'O', 'Unable to convert amounts into reporting currency',
'O*', 'Was unable to convert amounts into reporting currency',
'P', 'Posted',
'Q', 'Showing untaxed journal entry',
'Q*', 'Was showing untaxed journal entry',
'R', 'Showing unbalanced encumbrance entry without reserve account',
'R*', 'Was showing unbalanced encumbrance entry without reserve account',
'S', 'Already selected for posting',
'T', 'Showing invalid period and conversion information for this batch',
'T*', 'Was showing invalid period and conversion information for this batch',
'U', 'Unposted',
'V', 'Journal batch is unapproved',
'V*', 'Journal batch was unapproved',
'W', 'Showing an encumbrance journal entry with no encumbrance type',
'W*', 'Was showing an encumbrance journal entry with no encumbrance type',
'X', 'Showing an unbalanced journal entry but suspense not allowed',
'X*', 'Was showing an unbalanced journal entry but suspense not allowed',
'Z', 'Showing invalid journal entry lines or no journal entry lines',
'Z*', 'Was showing invalid journal entry lines or no journal entry lines', NULL ),

Specifically controlling the width of a table in an HTML report

I am generating an HTML report that consists of several detail tables
followed by a summary table at the end. Each detail table is
generated within a for loop. The summary table is generated
separately at the end. The detail tables all have the same column
width and same number of columns. However, I cannot get the summary
table to have the same column width even though it has the same number
of columns and the same column width setting.
Does anyone have any suggestions?
Thanks!

Hi,
What VI are you using to create the tables using the for loop? What VI (Append Table to Report.vi?) are you using to create the table at the end?
If you are using the Append Table to Report.vi to create the tables in the for loop, can you change the width of the columns and see expected behavior?
Let me know, and I should be able to help you out further.
Travis H.
National Instruments
Travis H.
LabVIEW R&D
National Instruments

Open & print an existing HTML report

I want to open a previously created, saved & closed HTML report for printing. I don't see any thing in the Report Generation vi group for opening existing reports and wasn't sure how to go about it (if at all possible) using the standard file open options to get to a report. Any ideas? Thanks.

Hello,
To print and view an HTML report you have already saved to disk, just create a new report, and use the "Append User Formatted HTML to Report.vi" to append the entire HTML content of the report to a new report. Then use the "Print Report.vi" and "Open HTML Report in Browser.vi" to print and view it. This is the easiest way I can think of...here is a screenshot showing what I mean:
Hope this helps,
-D
Message Edited by Darren on 04-18-2006 01:31 PM
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
print_and_save_report.jpg ‏84 KB

How to create a report and summarize some columns per page

Hi all,
I need to create a HTML report using the OA Framework Extension and it needs summarize some values columns highlighted similar to what can be done when using Report6i. Is there some class or package or a region or page's parameter that permits me to do that?
I also thought to summarize the values and put them in a table with a column saying that the line is a simple value or a summary and just put those values in html table. My problem still how to hightlight the html table line when the value "summary" is being fetched.
Any suggestion????
Thanks in Advance!!!

Essentially you want to write a pl/sql function which returns a varchar2 string. The contents of the string must be a valid sql statement.
Once you have done this, you need to add a report region as type sql report and you will have the option of writing it as a query or as a function returning query. Choose function returning query and enter in the function call.
Note your function must be valid, and must be executable by your apex parsing schema.
example:
create or replace
function test_report( p1_tablename in varchar2)
return varchar2
is
v_query varchar2(4000);
begin
v_query :=
'SELECT * from '||p_tablename;
return v_query;
end test_report;Edited by: Keith Jamieson on Aug 15, 2011 4:50 PM

Create crystal report file using JAVA

Can someone tell me how to a Create crystal report file using JAVA Programming
I want a very simple example

Please help me. It's urgent.[http://catb.org/~esr/faqs/smart-questions.html#urgent]
Be back in an hour or two...

Create Html Report in batch

Similar Messages

Maybe you are looking for