Create link to help topic from Flash file
We have started using Flash to develop our online learning
modules. So far they have been stand alone modules accessed from an
internal web site, published as .EXEs. Our latest Flash module is
related to a system for which we have an HTML help file. We'd like
to embed the Flash module in the help file b/c we want a link in
the Flash module to open a specific help topic.
I can get individual .SWFs into the help file but these Flash
modules are more complex, using many .SWFs for navigation, the TOC,
the frame, and for each interaction. In other words, the main .SWF
(or .EXE) calls many other .SWFs as the user navigates through the
module.
If I can't get the Flash module into the help file, and I can
only link to it as an external file, can a link from within a .SWF
in the Flash module open a specific help topic in the .CHM?
Any other ideas?
Thanks for your help,
SueM2
This question was answered by kglad, on Saturday, August 11,
2007 10:13 AM
Answer
no it doesn't. getURL() causes no security issues unless you
try to open the html locally and (try to) access something on the
internet.
unless your "flash site" is your local computer there is no
security issue. if your local computer is an internet server, you
just need to set the security settings for your local file and give
it permission to access the internet zone.
Similar Messages
-
Creating an online help system from FM files
I have been tasked with converting a 340 page user manual in
FrameMaker into RoboHelp in order to create an online help system.
I have imported all the FM files into RoboHelp. Each Project
file is a chapter from the FM user manual and each topic is a
subchapter.
Many of the images crossed over successfully. However, many
came across blurry and others didn't come across at all, instead
appearing as a small red box.
I have been unable to figure out how to get the images that
did not come across into RoboHelp.
After compiling and viewing the primary layout - it looks
pretty good (at least to me). The font and styles in RoboHelp are
the same that were in FM.
I am VERY new to RoboHelp and have learned FM primarily
through trial and error with some outside instruction.
I need help in getting the images into RoboHelp and some
advice on whether or not I am on the right track with my online
help system.Hi there Not User Friendly!
Can you give me an URL showing me your online help?
Im about making two huge online help systems, but im new to
Framemaker and RoboHelp.
One of them contains thousands of pages mades in Framemaker,
the other one is going to be made from scratch.
If you have any advices etc, I would welcome them a lot.
Thanks in advance -
Linking to .hlp topics from RoboHelp HTML 6
We have a comprehensive help file for our CADD systems built
in RoboHelp 6 for Word that has been compiled to WinHelp 2000
(.hlp) format. We now want to link to specific topic from a project
being built in RoboHelp HTML 6. This is easy to do in RoboHelp 6
for Word but I cannot find out how to do this in the HTML version.
Any help is greatly appreciated, and please dumb down the
responses, I will be appreciative not offended.
Thanks,
KellyHi Kelly and welcome to our community
Whether you may do this will depend on whether you are
creating WebHelp or a Compiled .CHM output. I don't believe it will
work with WebHelp. If you are creating a compiled .CHM, first off
make sure your primary layout is configured for Microsoft HTML
Help. If it isn't, you won't see the option I'm about to point you
to.
Once you cross that hurdle, click inside a topic and choose
Insert > HTML Help Controls > WinHelp Topic...
Hopefully that helps some... Rick -
Creating links to other topics very slow
Hi, I have RH 7 and when creating links from one topic to
another it takes a long time for the dialog boxes to appear. I have
about 10 links per topic and at three minutes per link, that's a
lot of time. Thanks, BeckyI'm having the same, or a similar, problem. I'm trying to
insert lots (more than a thousand) of help jumps into a Word 2007
document and it's taking a minute or so per topic. I'm running on a
laptop with an electronic disk. I don't see any CPD files to
delete. I tried dragging a help topic from my project window to the
Word document, but that didn't seem to do anything. Something I
thought would work, but whch didn't, was to create the links as
Word 2007 links (which is fast), then do a conversion and convert
links to help jumps. I still haven't figured out why that didn't
work. If there are any other suggestions, that would be
appreciated.
William -
Problems when printing help topics from OHJ
We have encountered some persistent problems when printing help topics from Oracle Help for Java (Ice Browser).
NOTE: When we print the same source files from Oracle Help for the Web, the printing problems are gone.
(1) Spacing Errors (all printers had identical results)
Text with special formatting (<b>, <i>) often has either too much space or not enough space.
Links often have extra spaces underlined before or after the link, itself.
(2) When printing multiple help topics from the TOC (an entire branch in the tree):
On some printers, no graphics print correctly, but instead print as one of the following: 1. empty box the size of one character, 2. black box the size of one character, 3. black box the size of the original graphic. We could not detect a pattern that caused 1, 2, or 3.
NOTE: all graphics are bit maps (screen captures) that were generated in the same manner.
NOTE: if these same help topics are printed one at a time form Oracle Help for Java, the graphics print fine.
Is this a problem with the Ice Browser?
Thanks for the help,
Wendy StudinskiThere are a known issue with the ICEBrowser printing in some circumstances. The laying out of text by the ICE Browser relies on font metrics (being able to measure the width of a run of text in a given font). On screen it looks great, but when printing, even though the GraphicsConfiguration for the printer is being used, these widths are sometimes off, which can result in text running together at boundaries between text styles. We're not sure what to do about this problem, and we've reported it to IceSoft.
Not every font has this problem, so varying the font you are using might help the appearance when printed.
The other problem you report, problems with the images when printing multiple topics, is something that we will look into. -
Problem importing Help topics from FrontPage into RoboHelp
Hi there,
This is my first time here.
I am a tech. writer in my first job (I've been here a couple
of weeks).
My company has just purchsed RoboHelp, and wants to import
it's Help topics from FrontPage (which I know nothing about) into
RoboHelp (which I know a teeny bit about).
I know the other tech writer here tried to import the topics,
and had R.H. continually crash.
I am the only tech. writer here for the week (aaaggghh! lol),
and I need to know how to fix this problem.
Please, when you respond, imagine that you are taling to a
first grader , and keep the instuctions simple.
Thanks in advance,
Leigh-AnneHi Leigh-Anne. First off don't woory about being on your own.
We'll all been there at some point and come out the other side.
Rick asked you whether you had the project on a network
because this is the cause of so many RH problems. The underlaying
Access DB in RH doesn't work at all well there. It is highly
recommended that you work on your local PC and back up to a network
each night. You say there are two of you. If you are using the
RoboSource control features of RHX5 then you can have the project
on a network but the actual source files must be stored and changed
on your PCs.
You could try creating a new RH project and import the
FrontPage topics a few at a time. If this works, try a few more
into the RH project. Repeat this until you hit the problem. Once
you do, import the topics one at a time until you hit the problem.
This will identify the offending topic - if indeed the problem is
in a topic! Once you're there, try creating a new topic and cut and
paste the old topic's elements into the new topic. It's all a
process of elimination I'm afraid.
Try this and come back to the forum with any further problems
you find. -
Trying to "Send Link..." from the File pulldown with Outlook
When I try and "Send Link..." from the File pull down another Outlook window opens up even though Outlook is up and running and that window has an error message " Navigation to the webpage was canceled" and an Outlook E-mail message is generated which is all in lower case including the title and the link which causes the link not o function if it requires upper case letters as well.
Hi,
From your description, the issue may be related to the CAS server performance. And we can verify it by obtaining the performance log when the issue appears again.
To get the performance log, we can use Exchange 2010 performance monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=692
Then we can compare the values in the log file with thresholds in the RPC Client Access counters:
http://technet.microsoft.com/en-us/library/ff367877(v=exchg.141).aspx
If there is great gap between the values and thresholds, it is the performance issue.
Hope it can help you.
Thanks -
Creating links to Word, PDF and Powerpoint files
I need advice on how to create links to Word, Powerpoint and PDF files in my Captivate project. How do I also make sure that when my file is published, those links can be accessed by the reader. I am new to this process. Thanks!
Yes. You can place the linked file in your zipped folder. Here is a recommended workflow.
1. Add a button (Smartshape or regular button) to the slide.
2. Assign the Open File or URL action to the button. In the URL field, specify the file name (say, Sample.PPTX) which you want to link to.
3. Click the down arrow button next to the URL field and select New so that the file launches in a new window.
4. Save and publish your project to a folder.
5. Go to the published folder and place the linked Sample.pptx file in the folder.
6. Zip the published folder.
Absolute Path is where you give the full path of the file's location including the folder structure. For example, C:\<UserName>\Documents\My Adobe Captivate Projects\Sample.pptx. If you use this, then you have to maintain the same folder structure in the published folder as well, which is impractical.
Relative Path, in this case, is where you just give the file name and make sure that the file is in the published folder.
Just Google and you will find several examples of absolute and relative paths. You will even see that you can define sub folders if required.
Sreekanth -
How do I create. A single PDF from multiple files? PDF pack on iOS
How do I create. A single PDF from multiple files? PDF pack on iOS
The primary reason I signed up for. PDF Pack was to create a single PDF from multiple image files and other PDFs .
Is this possible? If so how
thanks in advance
richHi Rich,
The combine files feature isn't available when you're using Reader for iOS. However, you can log on to the web interface at Adobe Acrobat.com using your Adobe ID and credentials, and use the Combine Files feature there.
Please let us know if you need further assistance.
Best,
Sara -
Link from flash file/moving not working on a page
I will apologize first for what maybe a very elementary
questions. I was sent an swf file to add to a web page. I got the
movie to run on some of the pages where I inserted it into a
template and the template updated those pages. I think had to
insert it into another page and the movie does not work there. Does
this have something to do with the script in the script folder? A
conflict of some sort?
Also, I need to link the file a URL and putting <a
href> brackets around it is not working. Does the link to the
page have to embedded in the swf file?
Thanks for any help on this.
URL to see pages
Movie working but no link:
http://www.grantwrangler.com/advertise.html
Movie not even showing up:
http://www.grantwrangler.com/index.html> Also, I need to link the file a URL and putting <a
href> brackets around it is
> not working. Does the link to the page have to embedded
in the swf file?
wrapping an A HREF tag around a flash .swf object will not
work.
the link has to be "in" the swf, back when it was an FLA file
in flash.
Or- the .swf has to have actionscripting in it so that it
will take a url as
a parameter.
On the flash not showing--
Random observations from a quick look.
There is no \ backslash in a web path or url.
you can usually "get away with it" on a windows server, but
it's incorrect
and something to avoid.
<!-- Dependencies -->
<link type="text/css" rel="stylesheet"
href="build\fonts\fonts.css">
<!--<link type="text/css" rel="stylesheet"
href="build\reset\reset.css">-->
<script type="text/javascript"
src="build\yahoo\yahoo.js"></script>
<script type="text/javascript"
src="build\dom\dom.js"></script>
<script type="text/javascript"
src="build\event\event.js"></script>
<!-- Source file and calendar css -->
<script type="text/javascript"
src="build\calendar\calendar.js"></script>
<link rel="stylesheet" type="text/css"
href="build\calendar\assets\calendar.css" >
The javascript call to show the flash file contains an
absolute local path:
'file:///Macintosh HD/Users/user/Documents/ Work/Nimble Press
/Grant
Wrangler/Website/GW ADs/tiged
The noscript tag uses an absolute local path:
<param name="movie" value="file:///Macintosh
HD/Users/user/Documents/
Work/Nimble Press /Grant Wrangler/Website/GW
ADs/tiged.swf">
<param name="quality" value="high">
<embed src="file:///Macintosh HD/Users/user/Documents/
Work/Nimble Press /Grant Wrangler/Website/GW
ADs/tiged.swf" quality="high"
pluginspage="
http://www.adobe.com
it's also not a good idea to put things in a folder using a
blank space, and
whose name contains the word "ADs"
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Make a link in dreamweaver from flash file
Hi,
Can anyone help make it so that someone can click on the news text and it takes them to a page? the code is below: (I want the bold to be a link)
<?xml version='1.0' encoding='iso-8859-1'?>
<lijst>
<zin>dans slider</zin>
<zin>i can type anthin in here</zin>
<zin>You can easily add news...</zin>
<zin>test lenght test length test length test length test lenght test length test length test </zin>
<zin>????????</zin>
<zin>i can make as many lines as i like</zin>
</lijst>
This relates to a flash file that has been created
Many thanksHi,
do you think about a solution like this?
<body>
<div align="center"><a href="Link.php"><zin>dans slider<br />
I can type anything in here</zin>
<zin><br />
You can easily add news...</zin>
<br />
<zin>test lenght test length test length test length test lenght test length test length test<br />
</zin>
<zin>????????</zin>
<br />
<zin>i can make as many lines as i like</zin></a></div>
</body>
Hans-G. -
How do create jumps to other topics from a WebHelp proj linking to word docs?
How do I create jumps to other topics in a WebHelp proj that links to other word docs?
Can you please confirm that you want to link to Word files and where these files are? Also if they are external to your RH project, where they reside. The answrs to these questions will help us help you.
-
Need Help To Extract Logo from Flash File .swf
I have an attached Flash file that is in
.swf format. There is a N64 logo within this file that I'm
trying to extract as a
.png with a transparent background. I've been able to open
it in a program called
Flash Decompiler Trillix and in the sub-menus it has the
logo listed as a frame.
This is about as far as I have gotten and I'm stuck. Perhaps
someone else knows how to do this a little easier. I just need to
find a way to extra the logo that already has a transparent
background and save it in
.png format.
Any help here would be hot." ;)
Logo Flash
File .swfHello,
I ran into a similar problem a few months ago. I have the
Sothink Flash Decompiler and what I did was turn the SWF back into
a FLA. I then opened it in Flash and then exported what I wanted as
a PNG image.
Decompilers can extract the actual image whether it be jpeg,
gif, png, etc. But when it's listed as a frame(as you mentioned
above) then the method above is probably the best way to get it.
Good luck -
Problem in displaying topics from external files
Hello,
I have a set of Help projects created using Robohelp classic
7.00.139 by Blue sky Software Corp. There is a Master project and
sub projects linked together using “.cnt” files.
Now I want to move to HTML Help format (".chm")
Using Adobe Robohelp 6 for word, I convert all the help
projects to .CHM FILES using Batch generate option in Adobe
Robohelp 6 for word. I put all the “.chm” files in a
single folder of my application. But now the links from my MASTER
projects to the sub projects are not working.
When an external topic is selected from the master it points
correctly to the topic title in TOC, corresponding to the external
sub project but the topic from the selected external file is not
displayed there.
What could be the problem? Are there any settings to be made?
Best regards
VIPLhi,
when you are creating the key figure info object. there is one tab called additional properties on that select decimal places as you want. activate it. and the reporting. check it out.
if helpful provide points
regards
harikrishna N -
9-scaling issue re-exporting from flash file
Hi,
I seem to have come across a consistent bug which is preventing me from progressing. I am creating assets in Flash which I am exporting as a swc file to be used in a Flex application. I have created a simple scrollbar thumb asset which is basically a rounded cornered rectangle and have added 9 slice lines to ensure the curved areas are outside of the scaling area. I convert the asset to a flex component and export as a swc file. When I test this asset in a simple swc inspector tool (built by one of the devs on my Flex project) I can manipulate the height and width and the 9-scaling works correctly. My problem occurs when I close the originating .fla file and close flash, re-open and without making any changes to the flash file re-export as a swc. When I do this the 9-scaling no longer works!
Has anyone experienced a similar problem? I am running a Mac with CS5 installed, any help would be greatly appreciated.
Thanks
EdIts been resolved. Thanks
Maybe you are looking for
-
Mac keeps crashing, 2weeks out of warranty, help!!!
My computer keeps crashing. Turns out its a week past warranty... Please help.... Hardware Overview: Model Name: iMac Model Identifier: iMac12,1 Processor Name: Intel Core i5 Processor Speed: 2.5 GHz Numb
-
Error when dynamically acquiring string with variable string length
Hi, I have written a VI to send voltage signal and read back the channel 1 and channel 2 data of a SR830 lockin amplifier using serial port. I obtain the channel readings as a single string separated by "," using the snap function. The problem is tha
-
Ads are not showing up in AppStudio generated WP8.1 Apps
Is there something happening with integrated ads since recently generated apps are not showing nothing but blank black ad control. I checked the source code and add controls are in Place as well ApplicationId and AdUnitId are correct. This is one of
-
Hi all, For the past ten months for a particular Scheduling agreement goods was being recieved thru the process such as creation of Inbound delivery in VL31N and then MIGO. But suddenly freight tab has is not being displayed in MIGO as i know the onl
-
Since the inceptions to the release dates to Java 7 posted at their website, we're curious if there is a dependency between the CPU update and the JRE client releases? Please explain and/or suggest the best practice approach to keeping both environme