[Create Login] Provisioning Error: event handler/adapter could not be found

Hello,
I am running a fresh install of OIM 9.0.3 (installed yesterday) on a Windows XP Machine running:
Weblogic 813 SP6
JDK142 11,
MSSQL 2000 SP3a I have a test resource, a simple MSSQL Table with a few fields, which I used the connector pack to install and connect. I imported the resource without any issues. However, when I attempt to Create Login on the resource, it gives me the following error:
"An error occurred while retrying one of the tasks
Create Login: Event Handler not found"When I check the details of Create Login (in my To-Do List for xelsysadm):
Error Details
The class file for event handler/adapter "adpDBCREATELOGIN" could not be found.I am very new to this system, and I really don't know where to begin trouble shooting this issue. Any ideas on what might be wrong with the system? It could be anywhere from missing a step in the beginning of the installation to doing something incorrectly. Any pointers on where I can start troubleshooting as to why I can't provision would be very helpful and much appreciated!
Thanks

Did you compile the adapters? When you import them from XML they must be compiled before you can use them. Go to the Design Console -> Dev tools -> Adapter Manager and compile them there.

Similar Messages

SQL Developer Connection Error: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection

Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760d

Hi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok

Java.sql.SQLException: IO Error: The Network Adapter could not establish...

Hi,
I know that there are a lot of threads with this error, but I don't know how to solve my situation yet.
I'm trying to access to the database via JDBC, and the driver return the following error:
java.sql.SQLException: IO Error: The Network Adapter could not establish the connection
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:536)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at net.sourceforge.squirrel_sql.fw.sql.SQLDriverManager.getConnection(SQLDriverManager.java:133)
at net.sourceforge.squirrel_sql.client.mainframe.action.OpenConnectionCommand.execute(OpenConnectionCommand.java:97)
at net.sourceforge.squirrel_sql.client.mainframe.action.ConnectToAliasCommand$SheetHandler.run(ConnectToAliasCommand.java:281)
- My oracle database is up and I can access to it with locally with TOAD
- I can do TELNET localhost 1521 in the server that has the DB installed
- I can do a successful ping from the client computer to the oracle server
- There aren't any firewalls between the client and the server.
- When I try to do TELNET <IP Address> 1521 from the client computer to the oracle DB Server, the connection could not be opened
- I tryed to do a TELNET to another port where I have another service, and the result has been successful. So the problem is related with the port 1521...
I don't have any knowledge about database administration, so I don't know what to do to solve this.
Can you help me please?

java.sql.SQLException: IO Error: The Network Adapter could not establish the connectionThis preposterous error message is Oracle's way of saying either 'Connection refused' or 'Connection timeout' or 'no route to host' or 'unknown host'. However because of the stupidity of making up their own message instead of giving the original exception, it is impossible to say which. The pretentious wording is also stupid: network adapters don't create connections. TCP/IP stacks do that.
As to your problem, either there is no such host, no route to the host, nothing listening at the IP:port you specified, or there is a firewall in the way. And that includes a possible Windows firewall on the server host itself.

Jdbc thin error : The Network Adapter could not establish the connection

jdbc thin error : The Network Adapter could not establish the connection
I have been able to create a webservice as per the article Build a PL/SQL Web Service by jason price from otn website. while executing url to call the pl/sql procedure to get the data i am encountering this error
The Network Adapter could not establish the connection in the resultant xml output. Am I missing something here ?
Please see ouput below
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP-ENV:Body>
- <SOAP-ENV:Fault>
<faultcode>SOAP-ENV:Server.Exception:</faultcode>
<faultstring>java.sql.SQLException: Io exception: The Network Adapter could not establish the connection</faultstring>
<faultactor>/plsqlsample/dbfunc</faultactor>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope
my oc4j/j2ee/home/config/data-sources.xml file has this entry for the connection
<data-source class="com.evermind.sql.DriverManagerDataSource" connection-driver="oracle.jdbc.driver.OracleDriver" ejb-location="jdbc/hr_connDS" inactivity-timeout="30" location="jdbc/hr_connCoreDS" name="jdev-connection:hr_conn" password="xxxx" pooled-location="jdbc/hr_connPooledDS" url="jdbc:oracle:thin:@o11idev.concentra.com:9200:DEV1" username="hr8" xa-location="jdbc/xa/hr_connXADS"/>
I am not able to debug this error and any information to debug this error would be appreciated. I have scanned the metalink short of logging a tar. I am using the oc4j install on the 9ias webserver and not the jdeveloper/oc4j combination. The apps server runs 9ias on hp/ux.
Thanks
ashok

Ashok,
Your database connection URL doesn't look right to me. The default database connection listener port is 1521 (not 9200). You can check this using the "lsnrctl" utility.
To find the "host" and SID parts (of the URL), use the following SQL query:
select HOST_NAME, INSTANCE_NAME from V$INSTANCEGood Luck,
Avi.

Error: The Network Adapter could not establish the connection

hi, i am using classes111.zip (the oracle 8.0.5 thin driver) with
linux and gnu jsp pages. the backend is an oracle 8.04 NT
database.
i get this error: "The Network Adapter could not establish the
connection " my question is this - is this error the client
problem or the db server problem. here is the code:
String driverName = "oracle.jdbc.OracleDriver";
String url = "jdbc:oracle:thin:oracle1:1541:ORCL";
String user = "demo";
String pwd = "demo";
String SQL = "";
ResultSet rs;
try
DriverManager.registerDriver(new
oracle.jdbc.driver.OracleDriver());
Connection con = DriverManager.getConnection(url,
user, pwd );
DatabaseMetaData dma = con.getMetaData();
Statement stmt = con.createStatement();
rs = stmt.executeQuery("select * from test");
while(rs.next())
out.println(rs.getString("xx") +
rs.getString("yy"));
catch( SQLException e )
out.println("
error: -> " + e + " <-
exiting
any ideas?
thanks in advance,
steve
null

hi, i am using classes111.zip (the oracle 8.0.5 thin driver) with
linux and gnu jsp pages. the backend is an oracle 8.04 NT
database.
i get this error: "The Network Adapter could not establish the
connection " my question is this - is this error the client
problem or the db server problem. here is the code:
String driverName = "oracle.jdbc.OracleDriver";
String url = "jdbc:oracle:thin:oracle1:1541:ORCL";
String user = "demo";
String pwd = "demo";
String SQL = "";
ResultSet rs;
try
DriverManager.registerDriver(new
oracle.jdbc.driver.OracleDriver());
Connection con = DriverManager.getConnection(url,
user, pwd );
DatabaseMetaData dma = con.getMetaData();
Statement stmt = con.createStatement();
rs = stmt.executeQuery("select * from test");
while(rs.next())
out.println(rs.getString("xx") +
rs.getString("yy"));
catch( SQLException e )
out.println("
error: -> " + e + " <-
exiting
any ideas?
thanks in advance,
steve
null

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

IO Error: The Network Adapter could not establish the connection in oracle

Hi experts,
I have oracle developer days installed in my vitrual box machine. The connection to oracle datatase (11.2.0.2) contained in the oracle developer days was working fine via sql developer. I use eclipse to write some java programs to connect the database. However, somehow, I cannot connect the database via sql deveoper anymore. This is the error I got when I tried to connect it via basic connection type:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
Can anybody shed a light on this issue please. Thanks a lot in advance.

user571093 wrote:
Hi experts,
I have oracle developer days installed in my vitrual box machine. The connection to oracle datatase (11.2.0.2) contained in the oracle developer days was working fine via sql developer. I use eclipse to write some java programs to connect the database. However, somehow, I cannot connect the database via sql deveoper anymore. This is the error I got when I tried to connect it via basic connection type:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
Can anybody shed a light on this issue please. Thanks a lot in advance.Do you realize & understand that we are NOT standing behind you?
I, too, am running Oracle Developer Days inside VirtualBox.
On which system is SQL Developer installed?
The post errors indicate an OS/networking issue.
when was last time all worked without error?
what changed since then?
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Error in Packaging: Required handling Unit Could not be found.

Hi Experts,
I am facing one typical problem of " Required handling unit could not be found." Though the users had done the packing all the packaging related screen appears blank. And this problem is arising after some interval i.e. say for 6-7 outbound deliveries packaging related data can be viewed but suddenly for one delivery the data could not be viewed. Due to this handling unit data is missing on the packing slip and invoice. When i investigated the issue i found that no internal no are assigned to the handling units. Is it the system generated error or the transaction error i.e. packing-unpacking the material and then deleting the handling units without removing the material from handling units? Pl guide on the same.
Thanks in advance.

Ensure that
a) Number Range for Handling Units is maintained in VNKP
b) the required Packing Instruction and determination are maintained in POP1 & POF2
c) the value is maintained in material master sales:General/Plant data view against the field Packaging mat.type
thanks
G. Lakshmipathi

Error :the specified module could not be found --oci.dll : Oracle9i

hi ,
i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
"the specified module could not be found" for the file oci.dll.
earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
with regards,

Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.

Error - A valid installer could not be found, using AAMEE and CS6

I receive the error - A valid installer could not be found, when using AAMEE 3.0 to create a CS6 Trial Package in Windows 7. I'm following the procedure documented here - http://blogs.adobe.com/oobe/tag/cs6 Imaging CS6-Attack of the Clones. I've tried both pointing at the DVD and pointing to a local folder, after copying the DVD to a local folder and copying the \payloads folder from the second DVD. I know the DVD is valid because I did a manual installation. I'm pointing at the folder that contains the Set-up.exe file, plus I've tried pointing at every other folder as well, with no success. I have a 40 user license for CS6 Master Collection for a classroom on our campus. I need to create a image for this classroom, and was thrilled that a solution was being provided to accomodate this, but AAMEE does not work! I'm working in a Windows 7 environment.
On top of this frustration, my Adobe ID is not working, I've used "chat" support and phone support and I can still not log in. They claim it has been escalated. When I explained the AAMEE error to the phone support rep, he informed me that there was no technical support and my only option was to post the question on the forum...but you have to log in with your Adobe ID to post a question! Round and round it goes. So I had to create another ID under a different email, just to post my question. I'm getting the mystery "an error has occurred, please try again", when I try to log in with my work Adobe ID.
Help! Anyone?

RESOLVED - Thanks in part to the ALBERT-in-Vancouver and Tushar Bammi thread concerning a similar problem. I dissected the PDApp.log. I had copied the installation DVDs to a local folder per the Deployment Guide, when installing from the DVD initially failed. But, PDApp.log stated - EnterpriseNativeApplet Individual media disks on fixed volumes are not supported, please use CD/DVD or mounted ISO/DMG media. That clued me in to trying to create the MSI using the DVDs again. My fault - that the original attempts to create the MSI from the DVDs did not work, I didn't realize I needed to run AAMEE with elevated privileges. Note - the earlier attempts when I was running AAMEE with elevated privileges and pointing to the locally copied installation files, failed. Interesting. I'm confused as to why the Deployment Guide directed my to create a product-install folder...
I haven't tested the MSI file yet, but if I have additional problems I will start a new thread.
Thanks.

Error: The specified procedure could not be found

Apparently the password expired on my Windows 7 BETA installation. Upon restart the system notifies me and asks for a new password. After confirming the password I get the error:
"The specified procedure could not be found"
I cannot log in at this point. The old password won't let me in and I can't change it. The administrator account I found is disabled by default.
Is there any way to log in?

Okay, here is your dilemma.
You cannot login to your only account and the local administrator account is in its default disabled mode.
There is a solution, albeit totally unsupported. Go to http://www.sysresccd.org/Main_Page and download the latest SystemRescueCd. Burn a CD from the ISO. When you boot with the SystemRescue CD, you will type ntpass and hit <enter>. From there, make sure you read the screens. You will have make selections depending on how you loaded Windows 7 (clean vs. upgrade vs. dual boot, etc). Using this disk, you CAN enable the local administrator’s account and login in.
I just did the procedure using Windows 7, build 7000 with SystemRescueCd 1.1.6.
Good luck.

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Recieving error 8001: Database connection could not be found

In hyperion reports 11.1.1.3 I am trying to create a new report. I created a new connection and after i created a new grid I wanted to see what is looks like. when I launched it. I recieved the error 8001: The database could not be found 8c5a0a4_13c44c8A227_-7d10 I tried other connections I recieved the same error. Just to make sure I tested an extising report and it worked fine. Can some one please tell me what I am missing and what do i need to do to get this wo work. Any help is appreciated

I logged out of Hyperion reports and logged back into the application and I had a connection with no issues

Error code; original file could not be found, would you like to locate it?

when i try to transfer songs from my library to my ipod shuffle, i get this error message (error code; original file could not be found, would you like to locate it?). Then an exclamation point(!) in the first column it appears next to the song in the library.
When i go to the folder mymusic/itunes/itunesmusic folder, the song is there, but why is there an exclamation point next to the song in the library? And how do I restore all these songs, and what causes this?

Sounds like your iTunes .ITL library file got corrupted.
What are the iTunes library files?
There are some posts around here by Buegie on how to fix that...

Error message - Original file could not be found

When I open itunes, and try to click on a song, there is an "!" and I get the error message "original file could not be found. Would you like to locate it?"
It does this for every song. I have to trace it down to "My Music\itunes\itunes\itunes music" and under that I have hundreds of files by artist.
How can I listen to the songs so I don't have to click on each one to make them play?
I hope you can help me.

First, a correction from my previous post: At the beginning I meant to write The iPod wasn't designed to sync playlist-related information back to iTunes.
And as for the polydorus link, let's try this .
Sorry about that.
Does that make sense? Do I need both folders?
No, in the end you'll only need one but I'm still not sure which one.
*I think the difference is there are no folders like in wndows, but the itunes library leads me directly to my library on the itunes website
I don't understand what you mean by the itunes library leads me directly to my library on the itunes website.
It sounds like there is only one iTunes database - iTunes Library.itl - file and that it's in your iTunes1 folder. Whether or not that is the case, what I'd like you to do is follow the instructions in this article in the Apple Knowledge Base for opening an alternate iTune Library file. Select the Choose Library option and use the navigtion window that appears to make your way to an .itl file.
Select the .itl and iTunes will open with a Library that may - or may not - be different than what you last saw: somewhat different contents or exclamation marks may be present again.
If it's not a library you're happy with, close iTunes, wait ten seconds or so and then repeat the procedure looking for another .itl file - each one contains references for a different iTunes library.
When you find a library you're happy with, i.e. all the contents are listed and no exclamation marks, make a note of the location of that .itl. It's the one you're going to want to work with.
Using that database file, you can go back to iTunes, right-click various songs > Get Info > Summary tab and look to the bottom of that window to find out where that Library is being directed for those files. Make a note of that location.
When we know those two things, we should be able to proceed from there with deleting things.
In the future, when I buy new songs from apple, where will they automatically get stored?
In the location that's been selected in iTunes Edit menu > Preferences > Advanced tab for the iTunes Music folder.
What will happen when I sync my ipod on the computer?
That brings us back to the beginning of this post, by default the synch goes from iTunes to your iPod. So you shouldn't synch your iPod unless there's a satisfactory Library being displayed in iTunes.

[Create Login] Provisioning Error: event handler/adapter could not be found

Similar Messages

Maybe you are looking for