Create mutiple records w/dynamic checkboxes?

Greetings
This is no doubt an easy one, but can't seem to get multiple
checkboxes displayed dynamically to create corresponding multiple
records?
The form page has:
<form action="add_action.cfm" method="post">
<cfoutput query="get_all">
<tr bgcolor="###iif(currentrow MOD
2,DE('ffffff'),DE('d9ecff'))#">
<td class="tddynamic">#num#</td>
<td class="tddynamic">#descriptions#</td>
<td class="tddynamic"><INPUT Type="Checkbox"
Name="ID"
Value="#thequery.ID#"</td>
Action Page?
Access, CF8
Thanks for your time in teaching an old dog new
tricks...

Try this:
<cfoutput query="GetBlogs">
<tr valign="top">
<td>
<input name="BlogID" id="BlogID" type="checkbox"
value="#BlogID#"> #BlogName#
</td>
</tr>
</cfoutput>
<cftransaction>
<cfloop index="i" list="#FORM.BlogID#">
<cfquery name="Subscription" datasource="#blog#">
INSERT INTO _subscriptions
(DateSubscribed, BlogID, SubscriptionStatus, Subscriber,
SubscriberEmail)
VALUES
(getdate(), #i#, 'Active', '#cookie.username#',
'#cookie.useremail#')
</cfquery>
</cfloop>
</cftransaction>
Ken Ford
Adobe Community Expert Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Fordwebs, LLC
http://www.fordwebs.com
"Fineus" <[email protected]> wrote in
message
news:gaov4l$809$[email protected]..
> Hi Ken,
>
> I saw one of your postyes on the web heloing someone
out, and was hoping
> you
> might be able to help me out. I am generatign a dynamic
list of check
> boxes.
>
> <cfoutput query="GetBlogs">
> <tr valign="top">
> <td><input name="Subscription_#BlogID#"
type="checkbox"
>
value="#BlogID#"> #BlogName#</td>
> </tr>
> </cfoutput>
>
> Works great. What I cant seem to get is how to put the
selections into a
> database as individual records. I keep getting a BlogID
undefined error
> before
> it even gets to teh insert.
>
> <cftransaction>
>
> <cfset SubscriptionID =
Evaluate('Subscription_#(BlogID)#')>
>
> <CFQUERY NAME="Subscription" DATASOURCE="#blog#">
> INSERT INTO _subscriptions(DateSubscribed, BlogID,
SubscriptionStatus,
> Subscriber, SubscriberEmail)
> VALUES(getdate(), '#SubscriptionID#', 'Active',
'#cookie.username#',
> '#cookie.useremail#')
> </CFQUERY>
>
> </cftransaction>
>
> Any help would be much apprciated
>
>

Similar Messages

How to create a record structure dynamically

Hi,
I would like to create a record structure dynamically in the body of my pl/sql procedure.
I don't want to create the structure in the declaration because my record structure depends on some parameters that the procedure will receive.
Thank you

> I would like to create a record structure dynamically in the body of my pl/sql procedure
Terrible idea. Why? Because if the structure is dynamic then you need to write pretty complex code to handle this structure that could be anything. Complex code means buggy code. Inconsistent code. Weird run-time errors. Etc.
Yes, you can create dynamic "structures" - for example, you can create a user defined type that at execution time can decide what properties it has. Similar to a an object in an o-o language that has a RTTI (Run Time Type Information) interface.
But this is complex. And what did I say about complex code above? Not the best of ideas most of the time.
There is however a very easy way to deal with dynamic data via a "dynamic" structure that is in fact a statically defined structure. Arrays aka collections aka associative arrays.
E.g.
create or replace type TStrings as table of varchar2(4000);
Using this I can create a SQL statement (cursor) on any table, with any predicates, and pass the results (dynamic list of columns) to a procedure for processing:
select TStrings(object_id,object_type,object_name) as DYNAMIC_LIST from user_objects order by object_type, object_name
Using this I can create a procedure that accepts a dynamic list of values and process these:
create or replace procedure DynamicProcess( list TStrings ) as ...
So when thinking "dynamic structures" - think it through carefully. There is a difference between an UNKNOWN structure and a DYNAMIC structure.
The former needs a RTTI interface. You have no idea what the structure contains. You need an interface to call in order for it to describe the structure for you. This is complex stuff.
The latter means that you know the structure as it is pre-defined (statically defined). At run-time, it can contain any number of elements - thus making the structure dynamic. This is easy stuff.
I would rather go for the easy stuff than the complex stuff any time of the day - even when on my 3rd cup of coffee...

Printing Selected Records thru Dynamic Checkboxes

Hi,
How to print records, selected thru checkboxes on the button action ? Everything is dynamically handled. Kindly help.
Regards
Mandeep Kaur

Hi,
Please check following blog, which may be helpful for this functionality:
Implementing Copy Down functionality in WebDynpro Java
/people/abhilash.gampa/blog/2008/01/16/implementing-copy-down-functionality-in-webdynpro-java

Single Dynamic Checkbox record

Hi,
I am displaying 1 record with dynamic checkbox with the below
statement
select empno, ename, job,wwv_flow_item.checkbox(1, rownum) pr from emp where rownum = 1
When i hit the Save button i am using onMouseDown event and calling
the javascript function to make sure the checkbox is checked, and then i am submitting the Page.
For SAVE button in the button attributes i have this code: onMouseDown="Members_Selected();".
The below code is used in HTML HEADER:
<script language="JavaScript">
function Members_Selected(){
var bflag;
bflag = false;
alert('total count of check boxes:'+document.forms[0].f01.length);
for (var i=0; i<document.forms[0].f01.length; i++)
if (document.forms[0].f01.checked == true )
bflag = true;
if (!bflag)
alert("Please select Atleast 1 Member.");
return false;
if (confirm("Are you sure you want to assign the selected members !!"))
doSubmit('SAVE');
else
return false;
return true;
}</script>
Below is the problem i see When i HIT the SAVE BUTTON, by Selecting* the checkbox :*_
I see the java script alert : total count is shown as "undefined"
and another javascript alert : 'Please select Atleast 1 Member',
and the page is not submitted.
Have anyone encountered this problem, i have tested in apex workspace too, i see the same problem.
Any help or suggestion is appreciated
Thanks

Hello:
Check if this modified JS works for you function Members_Selected(){
var bflag;
bflag = false;
var arr=new Array();
obj=document.forms[0].f01;
if (obj.length)
    arr=obj;
else
    arr[0]=obj.value;
alert('total count of check boxes:'+arr.length);
for (var i=0; i<arr.length; i++)
if (arr.checked == true )
bflag = true;
if (!bflag)
alert("Please select Atleast 1 Member.");
return false;
if (confirm("Are you sure you want to assign the selected members !!"))
doSubmit('SAVE');
else
return false;
return true;
varad

Dynamically creating a Record Group based on Previously entered Record Grou

Forms [32 Bit] Version 10.1.2.3.0 (Production)
Hi,
I know how to dynamically create a record group based on a query and putting the code in When new form instance.
My query is. I have a form which has multiple Record Groups and the user wants to dynamically create subsequent groups based on previous groups.
For example
I have a record group with selects a Location,
when the user selects the Location from a list of values
the 2nd record group called 'Cost Centres' will have to filter out only those with the locations selected above.
How can I populate the 2nd record group at run-time when I do not know what site the user will select?
If I simply populate in when new form instance as in location and just select everything, the list of values populates.
CC field is a LIST ITEM and the list style is a POP LIST, it is not required.
I have put the code in the Location field in the when-list-changed trigger.
I am getting this error:
frm-41337: cannot populate the list from the record group
here is the code:
DECLARE
v_recsql Varchar2(1000); -- The SQL for creating the Record Group.
v_recgrp RecordGroup; -- Record Group
v_status Number; -- Return Value of Populate_Group function.
c_where VARCHAR2(1000);
BEGIN
     IF :location = '1' THEN
          c_where := ' substr(cost_centre,1,2) in (''01'',''02'')';
     ELSIF :location = '2' THEN
          c_where := ' substr(cost_centre,1,2) in (''02'',''03'')';
     ELSIF :location   = '3' THEN
          c_where := ' substr(cost_centre,1,2) in (''01'',''11'',''07'')';
               ELSE
          c_where := ' 1=1'; --EVERYTHING
     END IF;
v_recsql := 'SELECT cost_centre, description FROM   cost_centres where '||c_where;
-- Create the Record Group
v_recgrp := CREATE_GROUP_FROM_QUERY('v_recgrp', v_recsql);
IF NOT ID_NULL(v_recgrp)
THEN -- No Error, record group has been successfully created.
-- Populate Record Group
v_status := POPULATE_GROUP('v_recgrp');
IF v_status = 0
THEN -- No Error. Record Group has been Populated.
POPULATE_LIST('block.CC', 'v_recgrp');
END IF; -- IF v_status = 0
-- Delete the Record Group as it is no longer needed.
DELETE_GROUP('v_recgrp');
END IF; -- IF NOT ID_NULL(v_recgrp)
END;thanks for your assistance.

Hi,
Once record status gets change for block you can not populate/repopulate the list item. Keep those list items as non-database item with different names and create different items as database orignal items. Than assign the values in WHEN-LIST-CHANGE trigger to the actual database items.
-Ammad

Dynamic action to create ESI record

Friends
I am using the following code to create ESI record in infotype 588 in Dynamic actions and working for a single payroll area.
0001
04
862
P
T001P-MOLGA='40'
0001
04
863
P
PSPAR-MASSN='S1'
0001
04
864
P
P0001-ABKRS='P3'
0001
04
865
P
P0001-PERSK='W0'
0001
04
866
F
GET_DATE(HBRDYNMS)
0001
04
867
I
INS,0588,0001,,(P0000-BEGDA),(P0000-ENDDA)/D
My requirement is PERSK is same for various payroll areas, hence don't want to create separate codes.
I am trying to insert multiple payroll areas in line no. 864 with the following code
0001 04 864 P0001-ABKRS = 'P1' OR P0001-ABKRS = 'P3' OR P0001-ABKRS = 'P5'/X
But the record is not getting created.
Pl. help to use multiple payroll area option.
regards
Raghuram R

If you are useing for multiple area please use the below
6
1
P
P0001-ABKRS='XX' /X
6
2
P
P0001-ABKRS= 'XX' /X
you shoduld use all the payroll areas with /X which say if payroll X or Y but not only or after X.

Creating Record Group dynamically.

Hi,
I have multi line block. My req is i have create record group dynamically based on some fields in line level. This my code in To Location - Key next item,
DECLARE
group_id          RecordGroup;
v_lms_lov lov;
BEGIN
group_id := Create_Group_From_Query ('RG_LMSID',
'SELECT lms_id
FROM sify_lms_header
WHERE from_location = :lines.from_location
AND to_location = :lines.to_location;'
v_lms_lov := find_lov('LOV_LMSID');
set_lov_property(v_lms_lov,group_name,'RG_LMSID');
Set_Item_Property('LINES.LMS_ID',LOV_NAME,'LOV_LMSID');
END;
It says, no records in lov. Anything i missed.
Or any other way to achieve this.
Pl help.
Thanks
Kavitha

Kavitha,
Why you need Dynamic record group for this?, you can give the control names in the record group query. Then the record group's query will be
SELECT LMS_ID FROM SIFY_LMS_HEADER WHERE FROM_LOCATION = :LINES.FROM_LOCATION AND TO_LOCATION = :LINES.TO_LOCATIONAnd if you still want to use the dynamic record group creation, then try
DECLARE
     RG_Group_ID RECORDGROUP;
BEGIN
     RG_Group_ID := FIND_GROUP('RG_LMSID');
IF NOT Id_Null(RG_Group_ID) THEN
          DELETE_GROUP(RG_Group_ID);
END IF;
     RG_Group_ID := CREATE_GROUP_FROM_QUERY('RG_LMSID', 'SELECT LMS_ID FROM SIFY_LMS_HEADER WHERE FROM_LOCATION = ''' || :LINES.FROM_LOCATION || ''' AND TO_LOCATION = ''' || :LINES.TO_LOCATION || '''');
     SET_LOV_PROPERTY('LOV_LMSID',     GROUP_NAME, 'RG_LMSID');
     SET_ITEM_PROPERTY('LINES.LMS_ID', LOV_NAME,   'LOV_LMSID');
END;Regards,
Manu.
If my response or the response of another was helpful, please mark it accordingly

Dynamic Action-Delimiting a record and creating new record

Hi ,
My requirement is in dynamic Action I need to delimit all records in a Subtype of an Infotype and create New record for these records with BEGDA as ENDDA + 1 of the delimited records.
Iam able to delimit all records in the Subtype but , Iam not able to create new records.
My code for delimiting is as given below, in T588Z,
9901     2          06     801     P     P9901-SUBTY='2'
9901     2          06     802     P     PSYST-IOPER='MOD'
9901     2          06     803     P     P9901-STATS='X'
9901     2          06     804     P     P9901-PREAS='91'
9901     2          06     805     F     DELIMIT_DTE(ZHSRAS_T588Z_9901)
9901     2          06     806     W     P9901-ENDDA=RP50D-ZZDATE3
9901     2          06     807     I     MOD,9901,3
9901     3          06     808     P     SY-UCOMM='UPD'
9901     3          06     809     F     DELIMIT_DTE(ZHSRAS_T588Z_9901)
9901     3          06     810     W     P9901-ENDDA=RP50D-ZZDATE3
The above code is working fine.
My code for creating new record is as given below, even though the control is oing to the subroutine, INS statement is not working, and hence new record is not getting created.
9901     3          06     811     P     SY-UCOMM='UPD'
9901     3          06     812     P     PSAVE-ENDDA<>P9901-ENDDA
9901     3          06     813     P     P9901-STATS<>'X'
9901     3          06     814     I     INS,9901,3
9901     3          06     815     F     BEGIN_DATE(ZHSRAS_T588Z_9901)
9901     3          06     816     W     P9901-BEGDA=RP50D-ZZDATE3
9901     3          06     817     W     P9901-ENDDA='99991231'
Kindly help me on this.

Hi shahana,
1. I have not worked on this dynamic action.
2. But instead of doing in 2 steps,
   it is usually done in 1 step only, manually.
3. If we CREATE record from some date,
   then the OLD will AUTOMATICALLY get Delimited.
(We don't have to do anything specially for delimiting
the old record)
regards,
amit m.

Create dynamic checkBox

Is it possible to create dynamic checkBox inside the loop? I am planning to generate a set of checkBox and then adding them into panels. Is it possible to do it? I have to generate checkBox dynamically.
Thx.

I tried as below. Is it right?
private void createCheckBoxes(List javaFiles) {
        int count = javaFiles.size();
        System.out.println("The number of .tna files are"+count);
        for(int i=0; i<=count-1; i++){
             System.out.println("Creating checkBoxes");
             //Create checkbox
              JCheckBox box = new JCheckBox("region"+i);
              box.setName("region"+i);
            dynamicPanel.add(box);
            dynamicPanel.validate();
    }I have few doubts.
Initially I tried as below:
JCheckBox box = new JCheckBox();
box.setName("region"+i);It created the check boxes dynamically but the name was not printed. Why is that so?
Now my first set of code works. But how do I refer to these dynamic components?
Thx.

How to create the selection screen dynamically

Hi,
I have a requirement to create the selection screen Dynamically. All the fields that should appear on the selection screen will be available in a custom table. So, based on the entries available in the Z tables, the selection screen should be built. Eg. If there are 10 records available in the Z table, the selection screen should consist of 10 fields. If there are 100 entries, the Selection screen should contain 100 fields. and the logic to build this selection screen should be carried out dynamically in the program.
Could anyone of you please share the valuable inputs on this. If anyone has the sample code to do this, please share.
Thanks in advance.
Regards,
Paddu.

Hi,
Kindly go through this sample program below:
DEMO_LIST_FORMAT_INPUT *and
check this function module:
FREE_SELECTIONS_DIALOG *.
Hope it helps
Regards
Mansi

How to Create a Table Component Dynamically based on the Need

Hello all,
I have a problem i need to create dynamically tables based on the no of records in the database. How can i create the table object using java code.
Please help.

Winston's blog will probably be helpful:
How to create a table component dynamically:
http://blogs.sun.com/roller/page/winston?entry=creating_dynamic_table
Adding components to a dynamically created table
http://blogs.sun.com/roller/page/winston?entry=dynamic_button_table
Lark
Creator Team

How to delete records from dynamic internal table.

Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
                  TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
          lw_line1 TYPE REF TO data.
    CREATE DATA Lw_line    TYPE (lw_TABNAM).
    ASSIGN      Lw_line->* TO   <WA_tbl>.
    CREATE DATA LW_LINE    TYPE STANDARD TABLE OF (Lw_tabnam)
                           WITH NON-UNIQUE DEFAULT KEY.
    ASSIGN      Lw_line->* TO <TBL>.
    SELECT * FROM (Lw_tabnam)
             INTO CORRESPONDING FIELDS OF TABLE <TBL>
             WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
     for ex : ( here lc_fieldname is KUNNR)
      loop at t_kunnr.
          lw_tabix = sy-tabix.
        Read table <tbl>
                with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
        If sy-subrc = 0.
        *Delete
        delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
        Endif.
     Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.

Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
       LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
               <WA>    TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max

"Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

hi,
i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode". When i press the buttom "start recording" i recieve the error message >6 117 Mass activity type does not exist.
Does somebody know what can i do?
thnaks

On the right click on HD under video quality to filter it.

Dynamic checkboxes with jsp

Hi,
I need to create dynamic checkboxes in my jsp page from the values retrived from the database(oracle).help me with the code.My oracle queries are in my Java bean coding.pls its very very urgent.help me out.

hi,
This is my bean coding.can u pls tell me how to store the resultset values in a arraylist.help me out.
package campaign;
//Imports
import java.io.*;
import javax.sql.DataSource;
import javax.naming.*;
import com.ibm.ws.sdo.mediator.jdbc.Create;
import java.sql.*;
* @author n48edf
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
public class AgentDao extends java.lang.Object implements UnsubscribeConstants
protected int indivID = 0;
protected Connection _conn;
protected DataSource ds = null;
protected ResultSet rs = null;
private String driver = null;
//need to code
public void agentLoad(IndvId) throws IOException
String driver = ORACLE_DRIVER;
String dataSource= ORACLE_DATA_SOURCE;
try
//Establish database connection
if (_conn == null)
try
Context context = new InitialContext();
// JDBC JNDI lookup
ds = (DataSource)context.lookup(dataSource);
context.close();
// Get a connection
_conn = ds.getConnection();
catch (Exception exp)
throw exp;
// Create a connection statement
Statement stmt = _conn.createStatement();
rs = stmt.executeQuery("SELECT DISTINCT busn_org_nm "+
"FROM BUSN_ORG bo,AGYLOCINDV_RESP_BUSORG ab "+
"WHERE ab.busn_org_cd=bo.busn_org_cd AND ab.indvid=p_IndvId");
String array[]=rs;
stmt.close();
cleanUp();
catch ( SQLException sqe )
System.out.println ("AgentDao.java - SQL Exception: " + sqe.toString());
sqe.printStackTrace();
catch ( Exception e )
System.out.println ("AgentDao.java - Exception: " + e.toString());
e.printStackTrace();
finally
if(_conn != null|| rs != null)
cleanUp();
public void cleanUp()
try
//close resultset
if (rs != null)
rs.close();
rs = null;
//close connection
if(_conn != null)
_conn.close();
_conn = null;
catch (SQLException sqe)
System.out.println("SQL Exception occurred in cleanUp() of AgentDAO");
sqe.printStackTrace();
catch (Exception e)
System.out.println("Error occurred in cleanUp() of AgentDAO");
e.printStackTrace();
}

Help with dynamic checkbox from database results

Hi,
I am creating some dynamic checkboxes from the results of a database read to sqlite. I am able to get the data and the correct number of checkboxes is being created but I'm having a problem populating the labels for the checkboxes. Here is the section of code that gets the results from the database and creates the checkboxes.
                var result:Array = stmt.getResult().data;
                for each( var obj:Object in result )
                    var cb:CheckBox = new CheckBox();
                    cb.label = obj.toString();
                    cb.setStyle("color", 0x00593B);
                    cb.setStyle("symbolColor", 0x000000);
                    container.contentGroup.addElement(cb);
Neil

This was answered on another forum for me.
The line cb.label = obj.toString();
needed to be changed to the data.
cb.label=obj.myDatabaseFieldName;
myDatabaseFieldName would be whatever column you are pulling the data in from and should be the actual name in the table.
Neil

Create mutiple records w/dynamic checkboxes?

Similar Messages

Maybe you are looking for