Create new article: BAPI_MATERIAL_MAINTAINDATA_RT

Hi all,
When i try to create a new article by using BAPI_MATERIAL_MAINTAINDATA_RT i am getting the follow success message M3801 ("Material & changed") but article is not created. After sending the BAPI_MATERIAL_MAINTAINDATA_RT and returning without an error I call a BAPI_TRANSACTION_COMMIT. How can I resolve this? Thanks in advance.
Best Regards
Gabriel.

Hi,
Thanks in advance. If i create an article using BAPI_MATERIAL_SAVEDATA then there is not using transaction MM43...
Best Regards
Gabriel

Similar Messages

Create new article using BAPI_MATERIAL_MAINTAINDATA_RT

Hi all,
When i try to create a new article by using BAPI_MATERIAL_MAINTAINDATA_RT i am getting the follow success message M3801 ("Material & changed") but article is not created. After sending the BAPI_MATERIAL_MAINTAINDATA_RT and returning without an error I call a BAPI_TRANSACTION_COMMIT. How can I resolve this? Thanks in advance.
Best Regards
Gabriel.

The answer is very simple. The article master data model has an internel link to the classification system. Unfortunately the classification system works with a kind of on commit logic.
Based on fact that the BAPis are not allowed to send a commit work, the caller must do this.
So after sending the BAPI_MATERIAL_MAINTAINDATA_RT and returning without an error call a BAPI_TRANSACTION_COMMIT
Then it will work fine.
If you have such articles with MH084 in your productive system, let me know. For single articles I can provide a fix report.
Generic articles should be deleted.
Better idea is opening an customer message for support.
regards
B

Creating new publishing page and viewing Properties throwing exeption

Hi,
I am creating new OOB publishing page using “Article Page” layout.
Please note Versioning and approval enabled on this “Pages” library. Also there is no workflow attached to this.
Steps I am following:
Goto Pages library.
Create new Article page from add new item
After that select that item and click on “View Properties” button from top ribbon. please not I have not checkedin page yet. It’s throwing exception as below.
System.ArgumentException: Item does not exist. It may have been deleted by another user.
at Microsoft.SharePoint.SPList.GetItemById(String strId, Int32 id, String strRootFolder, Boolean cacheRowsetAndId, String strViewFields, Boolean bDatesInUtc, Boolean bExpandQuery)
at Microsoft.SharePoint.SPList.GetItemById(String strId, Int32 id, String strRootFolder, Boolean cacheRowsetAndId, String strViewFields, Boolean bDatesInUtc)
at Microsoft.SharePoint.Publishing.CachedListItem.FetchAllFields()
at Microsoft.SharePoint.Publishing.CachedListItem.GetFieldContents(String index, Boolean refetchIfFieldNotFound)
at Microsoft.SharePoint.Publishing.WebControls.SummaryLinkFieldControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at Microsoft.SharePoint.We...
896a6c9c-e172-e000-b2f5-76c261783eb4
however same steps followed in our DEV environment and seems ok. only this issue with our another environments.
Also once I check in page and then goto "View Properties" then it's working.
Thanks in advance! Br,KS

Do you have any workflow on the publishing library? The error you mention I've seen sometimes when uses have created workflows that reference custom columns which are then deleted or removed.
Additionally, if a user has insufficient permissions to start an attached workflow, this error can also be encountered.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Cannot Create New Wiki Articles

For some reason, we are no longer able to create or edit new wiki articles on our server. We can create and edit blogs.
The server currently is the Directory Master, we've tried stopping and restarting web service, rebooting the machine, etc.
It is recognizing the directory user group, since only employees in the group (not customers) are allowed to view the articles on the site.
The error received when attempting to create a new article is:
Error from server: Problem creating the page: <type 'exceptions.OSError'> (13)

Apple helped out on this one.!
So, we were not able to create new entries in old (existing) groups... Talking with support we were able to create a new group, and that new group could create new entries.
SO it turns out to be a permission error. Using Sever Admin I copied the permissions from the new group and replicated those permissions down through all the other groups and lo and behold everything worked.
hope that anyone who runs into this <exceptions.OSError> 13 with server 10.6 finds this helpful

Creating new VM ends with Error code 3430 and 3040 in Hyper-V log. Does anyone have any insight into what might cause this?

The new VM is being created via a P2V process run from SCVVM. It reaches a completion of 60% and dies. I asked about this in another question detail of the VVM can be seen at this link:
http://social.technet.microsoft.com/Forums/en-US/virtualmachinemgrp2vv2v/thread/71aae7dc-13b5-46f1-b794-cc1b8085541f
Running Win2008 R2 w/ Hyper-V role enabled & SCVVM 2008R2
In any event I checked the Hyper-V logs to see if they might shead any light on the problem and there were two error messages associated with the attempted conversion. The first Event ID 3430
Log Name:      Microsoft-Windows-Hyper-V-Worker-Admin
Source:        Microsoft-Windows-Hyper-V-Worker
Date:          5/23/2011 4:51:25 PM
Event ID:      3430
Task Category: None
Level:         Error
Keywords:
User:          NETWORK SERVICE
Computer:      Virtual-Mgt.amrinc-corp.local
Description:
'test1' failed to set/change partition property: The system cannot find message text for message number 0xtest1 in the message file for 18568CA2-82E9-4A9F-B462-701D8FB4C447. '0x8007013D'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
    <EventID>3430</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
    <EventRecordID>1</EventRecordID>
    <Correlation />
    <Execution ProcessID="3316" ThreadID="2716" />
    <Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
    <Computer>Virtual-Mgt.amrinc-corp.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <VmName>test1</VmName>
      <VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
      <ErrorCodeString>%%2147942717</ErrorCodeString>
      <ErrorCode>0x8007013D</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
And the second Event ID 3040
Log Name:      Microsoft-Windows-Hyper-V-Worker-Admin
Source:        Microsoft-Windows-Hyper-V-Worker
Date:          5/23/2011 4:51:25 PM
Event ID:      3040
Task Category: None
Level:         Error
Keywords:
User:          NETWORK SERVICE
Computer:      Virtual-Mgt.amrinc-corp.local
Description:
'test1' could not initialize. (Virtual machine ID 18568CA2-82E9-4A9F-B462-701D8FB4C447)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
    <EventID>3040</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
    <EventRecordID>2</EventRecordID>
    <Correlation />
    <Execution ProcessID="3316" ThreadID="2716" />
    <Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
    <Computer>Virtual-Mgt.amrinc-corp.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<UserData>
    <VmInitialize xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <VmName>test1</VmName>
      <VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
    </VmInitialize>
</UserData>
</Event>
I have blownout the server and reinstalled the operating system and SCVVM and applied all the current updates to no avail. I have the exact same issue again. The problem seem to be at least on the serface an authority problem because I have no problem creating
new VM via the P2V process on an old Virtual Server running on Win2003R2.
Oh yes I can create new virtual machines on the system in question and move them to the library as was suggested to verify in a Blog post so I am really wondering what the problem is?
Configuration Analyzer Just gave me a warning about reporting not being setup on the VVM which it isn't so no suprise there?
Any information that might help me figure this would be greatly appreciated

I've looked at both threads, and there simply isn't enough information for me to tell you what is wrong. Please collect a trace (instructions in General forum) and open a case with CSS. CSS can provide more in depth analysis than what a forum
post allows.
As a shot in the dark, I have seen the issue outlined in the following KB article cause this exact same error message and symptom,
http://support.microsoft.com/kb/967902
Best Regards, Mike Briggs [MSFT] -- posting provided "AS IS" with no warranties and confers no rights

How can I add news articles to website and dynamically update headlines without MySQL?

Hi guys,
I update a number of website for athletes with news articles...
I'm doing it manually at the moment so I have to update:
    1. news.php (with date and article title which links to the article)
    2. News Article (with title, date and article text)
    3. includes/latestNews.php (an include latest 3-4 article dates and headline which links to the article - displays on every page via include)
The News Article is a plain and simple PHP file which is stored in a folder 'assets/news/' and the file is named according to date i.e. a news article today would be 130420 (as in 2013 year, 04 month, 20 day) so they sit in chronological order in the 'news' folder. There is a template page file called viewArticle.php which drags in the appropriate news article by link i.e. viewArticle.php?id=130420
At the moment, I have to update news.php, latestNews.php and the individual article individually and manually.
What I would like to do is...
...create, edit and add the News Article file (130420) to the 'news' foler as I am currently doing. But, with PHP, set news.php and latestNews.php to read the files in the 'assets/news/' folder to display the latest 4 article dates and linked headlines (for latestNews.php) and display all the dates and linked headlines (for news.php).
I don't know anything about databases and can't get my head around them so I would rather do it with PHP code. Is this possible?
Thank you very much and I hope to hear from you.
SM

This seems like a follow up question to your earlier one
http://forums.adobe.com/thread/1195549
Have you considered setting this site up as a blog such as Wordpress?
You could then automate much of what you're attempting with a few well chosen point-and-click plugins without touching any code.

Clicking "page from template" does not allow me create new pages

I stared designing a site with the trial version of CS4. Of course it involved a lot of trial and error, creating a page and canceling it again etc. At last I was able to design the index page and a few other pages, but suddenly just about 7 days into the trial period, the template started looking different; not displaying the images and displaying the home page article in an improper way. I also discovered that I could not create new pages by selecting file\new. When the new document dialogue page opens and I select "page from template" and then select a site I am working on, nothing shows in the items list. I only see the message "no items". Moreover, the "create" (new page) button is no more a click-able area.
I even tried it by proceeding as if I wanted to design a new site. I click file\new\page from template\the site, but when it comes to the stage where I should select "2 column liquid, left sidebar, header and footer" after clicking “page from template” I don't see anything in the items column. It only tells me "no item."
I thought this problem was due to the fact that I was using the trial version and that the trial version was limited in the number of new pages I could create. So I bought the full version. Alas! I discovered that changed nothing. Right now am stuck. Do you have any suggestion?

I think you're are confusing DW Templates with CSS Page Designs and Starter Pages.
Templates are a DW proprietary device. They permit you to have sitewide elements such as common menus, headers and footers on all your pages along with Editable Regions for page specific content (i.e. the stuff that changes on every page).
DW Templates looks like this (notice the Template Editable Comments):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />

<title>Untitled Document</title>



</head>
<body>
My Page Specific Content Goes here

</body>
</html>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Error while creating new app service plan for a webapp

Greetings !
I have a new webapp created and I want to move it a separate web app service plan to apply custom domain (Not available on free tier). From the new Portal I try to create new Web App Service plan and get this error.
"Failed to create App Service plan.
Failed to create App Service plan <App Service Plan Name>. There was an error processing your request. Please try again in a few moments."
Even while creation of the web app if I select create new App Service Plan it automatically goes into Free Plan.
Please help.
Thanks Paz

Hello Parvez Alam,
The issue of not being able to create a new App Service Plan is now fixed. I tried to reproduce this and was able to create the App Service Plan Successfully.
You should now be able to create the App Service Plan from the New portal. Also, the App Service Plan concept is only availaible in the new portal and not the existing portal.
You can refer to the link below for more information on this:
http://azure.microsoft.com/en-in/documentation/articles/azure-web-sites-web-hosting-plans-in-depth-overview/
Thanks,
Syed Irfan Hussain

When I updated to iOS 8.3 I lost all shared photo albums on my iPad Air. Other devises which I shared to still have access to photo albums but my iPad does not, therefore I can no longer add or delete to shared albums. I can create new shared albums.

When I updated to iOS 8.3 I lost all shared photo albums on my iPad Air. Other devises which I shared to still have access to photo albums but my iPad does not, therefore I can no longer add or delete to shared albums. I can create new shared albums.

Hello JimS19,
I'm sorry to hear you are having these issues with your iPad. If you are having issues accessing your Shared Albums from your iPad (but not from your other devices), you may want to double-check your iCloud Photo Sharing configuration as outlined in the following articles, just to make sure it hasn't changed:
iCloud Photo Sharing FAQ - Apple Support
Get help using iCloud Photo Sharing and shared albums - Apple Support
Sincerely,
- Brenden

Having problems creating new playlists...

When I get on iTunes i get a message saying The songs on the ipod cannot be updated because all of the playlists selected for updating no longer exists...but i have tried to create new ones and i still recieve the same message
Other OS

Are you on a Windows PC or a mac? Have you tried recreating the library? http://docs.info.apple.com/article.html?artnum=93313

Trx. MM41: Creation of new article data

Hi togehter,
I've a special question regarding tax data proposal in the area of SAP Retaill - Creation of new article data.
We've distribution centers in different countries.
If I create a new article masterdata for a sales organization assigned to Austria and a distribution center
assigned to Italy I get the following tax data proposal (if I enter '1' in field MARA-TAKLV):
IT Italy MWST Output tax 1 Full tax
IT Italy LCIT VAT license Italy 1 Full tax -> error: the category LCIT does not define classification 1 (only 0)
I assume that the entry LCIT comes from table TSKM.(material taxes).
Now my question.
We don't need the entry LCIT. It is possible or it is the right way to delete the entry named before?
Or should we create a new entry?
Thanks in advance for your help/info.
Best regards
Frank

Moved from SAP ERP SD Sales to SAP for Retail. Please try to post in the right forum to get right direction to your requirement / issue. Also go through the following blog which will help you.
Find Topic Spaces on SCN (Forums)
G. Lakshmipathi

Is it possible in KM to change "create new file" dialog?

Is it possible in KM to change "create new file" dialog (Folder -> New -> Text File...) on consecution of my own screens(I mean user inputs information, presses next button, then again inputs information and so on)? And if its possible, could you please tell me how to do this. I'm new to KM as well as to SAP EP...

Hi Aliaksei,
the PDF referred to mainly explains how to configure commands (within layout sets etc), but as far as I understand your question, you want to develop your own screenflows / command. First, I definitely would disadvise a beginner in the EP/KM area to start with such a task...
Anyhow, there is a one-step-screenflow-command tutorial on SDN: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/implementing flexible ui one-step-screenflow.article
For more steps, you could start decompiling a command class of a command which is more or less similar to your needs (and the underlying classes) to get further insight.
If you really should get that far and have implemented your own command, you just can switch the implementation class if you want to change the logic for an existing command under System Admin - System Config - KM - CM - UI - Commands - UI Commands - <command in question> Java Class setting.
Hope it helps
Detlev

Creating New Entity Instances within OPA

This is another one that I think I know the answer to, but I think it is best to confirm.
In prior versions, it was not possible to create entity instances within RuleBurst/Haley Office Rules. Is that still the case in OPA?
For example, my rules are determining the status of a case and the reason(s) why that status was determined. The case status may be Denied and the reasons may be "invalid customer Id", "expenses to income ratio too high", "primary customer not employed long enough", etc. I want to return all the reasons for the status. While the list of reasons is pre-determined, the ones that apply to a particular case are dynamic, as any, but not all can apply.
Given this situation using a database, I would create an instance of reason for each applicable one and link it to the case. In the past, with OPA's predecessor(s), it was not possible to create new instances from within. They either had to all be passed into the rulebase or a list of all allowable reasons attributes had to be created and then set to true for the ones that applied.
My preference is to create the instances inside OPA. Is that functionality provided in the current version?
Thanks,
Terry

Hi Terry,
Michael is correct that you can't write rules at design time which will dynamically create new entity instances at runtime. However, perhaps the new inferred relationships functionality in v10 could address what you're trying to do.
You can write rules which conclude membership of an inferred relationship. So you might always have, say, 10 instances of 'the reason' in every case, but as for which of those instances apply in any particular case, it depends on the details of the case. You could use an inferred relationship to collect up the entity instances which apply in the case.
First you'd need to set up a regular one-to-many relationship to instantiate the 10 instances at runtime - this would be done in the usual way. Then you'd also need to set up an inferred relationship and write rules to conclude the members of the inferred relationship. The instances which are members of the inferred relationship are then effectively the list of entity instances you wanted to create in your example above.
Have a look at this OPM Help article: http://www.oracle.com/technology/products/applications/policy-automation/help/opm10_1/Content/Rules%20using%20entity%20instances/Reason_about_relship_between_2_entities.htm
Cheers,
Jasmine

Can I create new IDOC segmemnt in user exit( edidd structure ) forcefully ?

RFFOEDI1 is the standard driver program which call the below user exit zxf08u06...
Am programing user exit ZXF08U06...
In user exit zxf08u06, actually edidd structue contains all the segments...
In user exit zxf08u06, I am reading each segment which are in edidd structure, pulling required data from database and passing this data into this segment, so that this data appears in the IDOC's segments (we02).
Now I need to create one new segment which is not there in edidd structure.
Still I inserted this new segment and updated data. This new is coming in IDOC out put But IDOC was crested with error . Am I not supposed to create new segment whcih was not there in edidd structure forcefully ?
MUCH THANKS IN ADVENCE.

Hi
Go thru the bellow links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400365
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Thanks
Sunil

How to create knowledge articles in CRM?

Dear All,
With the new 7.0 version being completely new to us, we have struggling with creating knowledge articles in the system. How to create a new knowledge article in the system?
Thanks in advance!
Leon

Hi Leon,
You have to made the following settings for knowledge articles in Customizing for Customer Relationship Management:
     Specified which groups appear in the authorization scope under: Master Data -> Knowledge Articles
     Defined surveys and their determination under: Master Data -> Knowledge Articles -> Questionnaires
      The settings you make for surveys in Customizing determine the surveys that appear in the Questionnaires assignment block for knowledge articles.
     Configured the Software Agent Framework (SAF) under Enterprise Intelligence
      These settings are required to make a connection to the TREX server, which allows for faster searches.
     Specified the categories to which the knowledge article can be assigned under: CRM Cross-Application Components -> Multilevel Categorization
Please find more details in the below link:
http://help.sap.com/saphelp_crm70/helpdata/EN/58/7c6e67f3834e338eab816bff7db5a6/frameset.htm
http://help.sap.com/saphelp_crm70/helpdata/EN/a7/2d70ccd04d4b8baa346e3a745c331a/frameset.htm
Hope this helps!
Regards,
Chethan

Create new article: BAPI_MATERIAL_MAINTAINDATA_RT

Similar Messages

Maybe you are looking for