Trx. MM41: Creation of new article data
Hi togehter,
I've a special question regarding tax data proposal in the area of SAP Retaill - Creation of new article data.
We've distribution centers in different countries.
If I create a new article masterdata for a sales organization assigned to Austria and a distribution center
assigned to Italy I get the following tax data proposal (if I enter '1' in field MARA-TAKLV):
IT Italy MWST Output tax 1 Full tax
IT Italy LCIT VAT license Italy 1 Full tax -> error: the category LCIT does not define classification 1 (only 0)
I assume that the entry LCIT comes from table TSKM.(material taxes).
Now my question.
We don't need the entry LCIT. It is possible or it is the right way to delete the entry named before?
Or should we create a new entry?
Thanks in advance for your help/info.
Best regards
Frank
Moved from SAP ERP SD Sales to SAP for Retail. Please try to post in the right forum to get right direction to your requirement / issue. Also go through the following blog which will help you.
Find Topic Spaces on SCN (Forums)
G. Lakshmipathi
Similar Messages
-
SAP IS Retail Outbound Idoc Creation for New Articles
Hi SAP Gurus,
Good day!
I would like to inquire if you are familiar with the necessary set up to create OUTbound Idocs to be sent to POS whenever a new article is created. I have already activated the Change Pointers for the Message Types for IS Retail via BD50. However, this did not solve the issue. I have an existing material which ably triggers the idoc change;however, when I try accessing the materials I created recently, no idocs are created.
Your help is most appreciated.
Best regards,Hi,
Check in WE20 partner profiles > customer type KU - Customer > choose your store number > under outbound parameters all relevant message type must defined
Look at the following links for more details:
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
Hope you got answer
regards
Satish -
Creation of new primitive data types
Is it possible to create primitive data types? Or perhaps there's another solution...
I have a need to work with signed integers represented by more than 128 bits, and would prefer to define such variables as primitive types and be able to use them as such. I have no problem creating "toString()" and friends for convert binary to decimal.
Thanks in advance.
Randolf Richardson - [email protected]
Inter-Corporate Computer & Network Services, Inc.
Vancouver, British Columbia, Canada
http://www.8x.ca/What about using "BigIntegers"?
http://java.sun.com/j2se/1.4.2/docs/api/java/math/BigInteger.html -
Bank Master Data ( Creation of new Account )....
Dear SAP Gurus,
Good morning to all,i have one doubt regarding creating a new Bank Master Data in Production, please help me.My user has a requirement which is like one Cash Credit Account has been opened with SBI bank where with the same bank and branch there is already an existing Current Account,now my client wants from me to create a bank master data for the new bank Cash Credit Account( as he is saying that he has to maintain BRS).
Now i have to know that what is the best practice in sap whether i should create one more master data for the new Account or i should attach the new account with the existing Bank Master?
Please help it is urgent.I'll be waiting for your valuable suggestion.
Regards
Rajiv KapurHi Rajiv,
Creation of new house bank will not serve purpose in better way, it is only required when there is a complext scenatio in check printing but that does not appear in your case.
So, create a new Bank Account in the existing House Bank, this will be included in Bank Reconciliation. Moreover, creation of Bank account instead of House Bank will also ease some maintainance in Bank Reconciliation statement configuration.
Regards,
Chintan Joshi -
How to sort news articles from Oldest(from the current date) to newest?
I have a list of news announcements from the month of "Jan 2015" to "Dec 2015". For example each month having a one event, so totally 12 events. But I need to display the latest news articles from current date of latest upcoming news at the top(i.e. May 2015) to farthest at the bottom(i.e. Dec 2015)
Try with sort!
{module_announcement sort="datereverse"} or {module_announcement sortType="datereverse"}. I'm not sure what syntax we use with the new render engine.
With the old syntax it would be {module_announcement,filter,id,noTemplate,effect,targetFrame,reserved,reserved,reserved,r eserved,sort} -
"Stocks" App posts wrong dates for news articles
I often read the news articles shown under the stocks that I own. I have noticed that with the iPod's included Stock app, the date of the news articles are not accurate. I go to read what I think is a recent news article, only to find out that it is a month old. I also notice the same old news headlines each day being refreshed with the current day's date again and again.
Just reporting this as a bug and an annoyance, making the Stocks App provided with the iPod basically useless.
Are there any known solutions other than using a different Stock app?I know i posted a similar post earlier this week. But the tutorial I got pointed at didnt work for what im trying to accomplish...
The other post (marked as answered) that didn't help the OP was the same reply... -
Deactivate creation of new next inspection date on re-GR
Our user created GR (MIGO) against a PO and subsequently a new batch with a next inspection date was created based on inspection interval set to 730 days.
The user agin after a few days did GR against the same PO and the next inspection date was again calculated based on this GR date and the interval. We do not want this re-assignment of the next inspection date once it has been set. Please help.
MrunalThe problem is a user error.
When you receipt a material that has a shelf life requirement, you must enter in the production date, (manufacture date), in the GR. If you don't, it will default in the current date and usse that to calculate the expiration date.
On the second receipt, the same thing will happen. If the same batch is specified, if I remember correctly, the system should give a message that "batch has already been receieved" or some kind of warning. For the production date, I believe it will still default in the current date. I think there is another warning that the expiration date will be recalculated and a "do you want to continue" question. If they blow through all these warnings, the system takes the new manufacture date and recalculates the new expiration date. To the best of my knowledge you can't change this. The users must be trained to ALWAYS enter in the correct prodcution date.
FF -
Merchandise Category creation for Generic Article in SAP IS-Retail
Hi,
Can anyone help me out to with clear and complete process and settings i have to maintain for merchandise category for generic article for shoes of our client. I created merchandise category with the below transaction codes
ct04,clwe,clwe,clw1 and wg21 but when i used to create generic article i have to find characteristics in variants tab in basic data view in mm41 but i didn't find it.
HELP ME with SCREENSHOTS which will HELP ME in FUTURE of our CLIENT
Thanks & Regards
Gopi Krishna
Mobile:+91 9741042296Hi Manish,
Thank you for your reply which is the procedure for relevance of variants in creation of generic article.My concern is to know complete merchandise category creation with screenshots which i can create by own merchandise category.
Thanks & Regards
Gopi Krishna Potteti -
CUP - Issue regarding creation of New SAP ID in CUP.
System : SAP GRC 5.3 SP 12..
We have requirement where in we need to design a workflow for creation of New SAP ID.
The Naming convention followed for SAP ID is FIRST LETTER of FIRST NAME and LAST NAME with maximum 8 characters.
For Eg
JOHN SMITH would have SAP ID as JSMITH
JERRY SMITH would have SAP ID as JSMITH01
The requirement here is when user fill the REQUEST FORM for NEW User ID there is field where in the requestor need to put the desired SAP ID,
Can a validation be set OR Logic be written so that user can put the SAP ID as per the naming convention..?
Also , any other solution as to how the situtation can be handled in CUP...
Regards.
AjitHi Ajit,
Yes, you can maintain the user ID in the Active Directory. User id will be now auto populated in the request form, from Active Directory when we data Source is LDAP -Actice directory. So when user login to end user form to create a request, It's all information( user details + manager details ) will fetched from Active Directory.
It is not possible to change userid in later stage of approval in the request.
You can have security as final stage and guide them to create user manually as per naming convention.
Make auto provisioning OFF in CUP
Kind Regards,
Srinivasan -
How can I add news articles to website and dynamically update headlines without MySQL?
Hi guys,
I update a number of website for athletes with news articles...
I'm doing it manually at the moment so I have to update:
1. news.php (with date and article title which links to the article)
2. News Article (with title, date and article text)
3. includes/latestNews.php (an include latest 3-4 article dates and headline which links to the article - displays on every page via include)
The News Article is a plain and simple PHP file which is stored in a folder 'assets/news/' and the file is named according to date i.e. a news article today would be 130420 (as in 2013 year, 04 month, 20 day) so they sit in chronological order in the 'news' folder. There is a template page file called viewArticle.php which drags in the appropriate news article by link i.e. viewArticle.php?id=130420
At the moment, I have to update news.php, latestNews.php and the individual article individually and manually.
What I would like to do is...
...create, edit and add the News Article file (130420) to the 'news' foler as I am currently doing. But, with PHP, set news.php and latestNews.php to read the files in the 'assets/news/' folder to display the latest 4 article dates and linked headlines (for latestNews.php) and display all the dates and linked headlines (for news.php).
I don't know anything about databases and can't get my head around them so I would rather do it with PHP code. Is this possible?
Thank you very much and I hope to hear from you.
SMThis seems like a follow up question to your earlier one
http://forums.adobe.com/thread/1195549
Have you considered setting this site up as a blog such as Wordpress?
You could then automate much of what you're attempting with a few well chosen point-and-click plugins without touching any code. -
RFC: Introduce new 'Article/Tutorial (Comment) Threads' in the Web Dynpro Forum
Some time ago I've suggested on SCN Support is both forum moderator and most active articles wrtiter
Valery Silaev
SaM Solutions
http://www.sam-solutions.net
Message was edited by: Bertram Ganz
This thread was branched from forum thread: How to print the data of a Model node.Hi Valery,
thanks for this great idea. Indeed, there is no channel set up to communicate feedback/suggestions/questions to Web Dynpro tutorials or articles in a standardized way.
WebLogs can be commented on the WebLog page itself and they are announced in a special ;\ New Web Dynpro Weblogs which can be opened via the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">Web Dynpro Feature2Sample Matrix</a>. Actually the section 'Further Information' lists all related articles, WebLogs etc. These links are regularly updated so that the Sample Description Pages helps to keep all links to valuable information in a central place.
The 'Sample Description Page' should additionally comprise a section <b>'Discussion'</b> with a link to the above 'Article Comment Thread' in the Web Dynpro forum. The reader downloads the material from the sample description page and also finds a link to the related 'Article Comment Thread' there.
For all new articles (which are combined with a related 'Article Comment Thread') the <i>Further Information</i> links could point to the 'Article Comment Thread' (which then itself links to the article) but not directly to the article resource. The reader can then also have look at the existing comments to the related resource. As an alternative the article PDF itself should have a permanent link to the 'Article Comment Thread' in the Web Dynpro Forum.
Please post your comments on this idea.
Regards, Bertram -
Creation of new internal delivery channel using AQ
Hi,
I wanted to route one of Trading partner data to a different queue.(no want to use existing queues - IP_IN /IP_OUT queue).
This needs to create a new delivery channel using AQ in B2B.
I have gone thru the steps & entered all entries, but I am not able to find any queues created in B2B schema.
Do I need to create a queue using PL/SL in B2B to make it available as internal delivery channel or this setup itself will create a queue in B2B?
PFA the entirs:
for transport parameters
- transport server (B2B server IP)
- Protocol as AQ
-URI - b2b.<uri_name> (name of Queue, wanted to create)
- Hostname
- Port
-SID - b2b
-consumer - b2buser
- receiptient - null
-Polling interval - 6000
Transport server details:
Host name - (IP)
IP - Host IP
username -
Pswd - for B2B schema
Any pointers will be a great help.
Regards,
MSAs mentioned by TH in the above post, first thing is to create the data type that is used for messages - IP_MESSAGE_TYPE. This data type will already be present in the B2B database and could be reused.
For a new data type you could do the following.
==============================================================
Create a new data type using the following
==============================================================
create type IP_MSG_TYPE as OBJECT (
MSG_ID VARCHAR2(128),
INREPLYTO_MSG_ID VARCHAR2(128),
FROM_PARTY VARCHAR2(512),
TO_PARTY VARCHAR2(512),
ACTION_NAME VARCHAR2(512),
DOCTYPE_NAME VARCHAR2(512),
DOCTYPE_REVISION VARCHAR2(512),
MSG_TYPE INT,
PAYLOAD CLOB,
ATTACHMENT BLOB
Once you have created a new Data type ( or are reusing the existing data type), you need to create Queue Table that will hold the Outbound and Inbound message queues. The existing Queue table is "IP_QTAB" which can again be reused.
For new Queue table you could do the following
==============================================================
Create a new Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue_table ( queue_table => 'MY_QTAB',
queue_payload_type => 'IP_MSG_TYPE',
multiple_consumers => FALSE);
If you need to reuse the datatype change the queue_payload_type to 'IP_MESSAGE_TYPE'.
Once we have the Queue Table that will hold the queues, we need to add and start the queues that are to be used for the inbound and outbound messages.
==============================================================
Create the new Queues into the Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_OUT_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_IN_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_OUT_QUEUE', dequeue => TRUE, enqueue => TRUE);
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_IN_QUEUE', dequeue => TRUE, enqueue => TRUE);
If you are reusing the queue table IP_QTAB for creation of new queues, then reference that for the queue_table in above commands.
You need to reference the queue_name eg. B2B.My_OUT_QUEUE in the B2B UI screen.
Hope this helps.
AKT -
Auto Creation of new requisitions based on a list of items
Auto Creation of new requisitions based on a list of items
We are starting discussions to determine how we could auto-create requisitions based on a list of servers in order to perform periodic health checks.
One approach we thought about was creating one service request that could spawn multiple requests, again based on a list and using a set schedule (weekly, monthly, quarterly, yearly, etc.)
Has anyone implemented this and can provide some guidance/tips?You can check this article for more references on how to use sp_helptext object_name stored procedure:
http://blog.sqlauthority.com/2007/05/25/sql-server-stored-procedure-to-display-code-text-of-stored-procedure-trigger-view-or-object/
I also suggest trying commercial tools to sync and compare the stored procedures between two databases. We used
ApexSQL Diff, but I've also heard some good things about
Devart's tools. -
Hi,
While creating a new Sales Order(tcode VA01) depending on the material, Item category will be generated and depending on the Item category purchase requisition screen(ME51n) will be automatically opened and PR will be created.
Now to automate this process, BAPI_SALESORDER_CREATEFROMDAT1 will be called to create the sales order. But the requirement is that we need to pass Requisitioner and Vendor to the BAPI for creation of PR.
But in this BAPI there is no option/field to pass Requisitioner and Vendor. So is there any other BAPI/Function Module where a new Sales order is created and also we can pass Requisitioner and Vendor required for creation of new PR.REPORT ZSALESORDER.
Parameters
Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d .
SELECTION-SCREEN END OF LINE.
Complete Deliver
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = p_autlf.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF. -
Hello!!
We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers .
Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user.
The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users.
I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
Thanks.As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left).
Maybe you are looking for
-
Java Card Kit - development environment
Hello! I need to upgrade to the latest Java Card Kit, because I need some of the classes in javacardx.framework, which is not supported by version 2.2.1. But some problems arises when I'm trying to use version 2.2.2 1) It requires jdk1.5. Ok, no prob
-
How to Save a file in InDesign 5 so it will open in InDesign 3 (no InDesign 4)
How do I save an InDesign 5 file in InDesign 5 so it can be opened by my graphic designer in In Design 3. Neither of us have CS4. She thinks she cannot open an .IDML file on In Design 3. Can she? What do I do to save it to get it to her so she can o
-
Standby database SRL & Online logs
Hi, I have just tried my hand at building a Physical standby database in Oracle 10gR2 using RMAN. I will detail out the steps that i have performed before asking my question. I configured every pre-requisite and i did not create any SRL's on primary
-
Reading .psd layers under OS X 10.7. in 64-bit app
Hi, I have an application that reads .psd layers content using old QT API (such a GraphicsImportSetImageIndex, GraphicsImportGetDataOffsetAndSize, OpenADefaultComponent etc.). I need to implement my code to 64-bit application under OSX 10.7. Lion and
-
for it to go away (sometimes 30 seconds) and I've tried clicking "don't show this again," and "ignore" and the other (all possibilities.) Its driving me nuts, and I'm thinking of switching to Opera instead of Firefox. Can you help? Thanks. MM2