Create new survey data for opportunity using abap code

Hello to all,
I have one requirement.
create survey data for given opportunity ID using abap code. or copy survey data from one opportunity to another opportunity using abap.
any ideas..
many thanks
Babu

Hello Babu,
You can do this through the CRM_ORDER_MAINTAIN FM, this is the generic FM to edit any transaction in CRM.
The FM contains an internal table IT_SURVEY that must be filled. Actually, this table will only contain a reference to the (completed) survey, it doesn't store the data of the survey itself.
For some example coding, take a look at the SrvTSurvey.do controller. If you want to see what data is stored in the IT_SURVEY table, create a transaction and attach a completed survey to it (you can easily do it in the standard views of the webclient) and take a look at the survey structure in the CRM_ORDER_READ FM/Report.
Let me know if you need more guidance,
Reward points if useful,
Regards,
Joost

Similar Messages

  • Improve data load performance using ABAP code

    Hi all,
             I want to improve my load performance using ABAP code, how to do this?. If i writing ABAP code in SE38 how i can call
    in BW side? if give sample code to improve load performance it will be usefull. please guide me.

    There are several points that can improve performance of your ABAP code:
    1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
    2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
    3. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
    4.Avoid using nested SELECT and SELECT statements within LOOPs.
    5. Avoid using INTO CORRESPONDING FIELDS OF. Instead use INTO TABLE.
    6. Avoid using SELECT * and select only the required fields from the table.
    7. Avoid Executing a SELECT multiple times in the program.
    8. Avoid nested loops when working with large internal tables.
    9.Whenever using READ TABLE use BINARY SEARCH addition to speed up the search.
    10. Use FIELD-SYMBOLS instead of a work area when there are more than 200 entries in an internal table where some fields are being manipulated.
    11. Use MOVE with individual variable/field moves instead of MOVE-CORRESPONDING.
    12. Use CASE instead of IF/ENDIF whenever possible.
    13. Runtime transaction code se30 can be used to measure the application performance.
    14. Transaction code st05 can be used to analyse the SQL trace and measure the performance of the select statements of the program.
    15. Start routines can be used when transformation is needed in the data package level. Field/individual routines can be used for a simple formula or calculation. End routines are used when you wish to populate data not present in the source but present in the target.
    16. Always use a WHERE clause for DELETE statement. To delete records for multiple values, use SELECT-OPTIONS.
    17. Always use 'IS INITIAL' instead of equal to '' because null for a character is '' but '0' for an integer.
    Hope it helps.

  • How to activate data in ODS using ABAP code

    Hi
    Question like in subject.
    THX
    Adam

    Hi........
    U can use Program : RSDG_ODSO_ACTIVATE ...........During activation the M version will be read.
    There are two other options besides the activation:
    Check only >> this will only check consistency of the ODS and no activation will be executed
    Clean up DDIC structures >> this deletes old generated tables, which were only necessary in previous releases
    Also check this link..............it is very useful.......
    https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action%3fpageid=35458
    Regards,
    Debjani........

  • I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that account.  How do I change the email address to a new one that I can access?

    I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that same account.  Now I can't seem to login to that account and I can't choose the option for forgot password because it will send email to the old workplace.  How do I change the email address to a new one that I can access?

    If you remeber the password to that Apple ID then follow these steps
    1 - Make sure you have an email address that is NOT an Apple ID
    2 - Go to AppleID.Apple.com
    3 - Where it reads Manage Apple ID - Sign in
    Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
    [To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
    Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
    I learned this not to long ago and worked for me. Hope this helps you!

  • Not able to create new e-mail on N8 using Mail for...

    Not able to create new e-mail on N8 using Mail for Exchange.
    Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
    When creating reply on mail the application crashes.  When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
    Any idea why creating mail is not possible?
    Regards,
    Joris

    problem is known
    more info there:
    /t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
    there is little workaround aslo.

  • How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

    Hi All,
    I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
    Thank you Very much.
    Regards,
    Ramesh J.

    Hi,
    Refer the below wiki link it may help you.
    Product catlog configuration for ECC - CRM - SCN Wiki

  • Changing Field Label length for Data Element using ABAP code.

    Hi Experts,
    We have a scenario where we have to update the maximum length of the various Field Labels (Short, Medium, Long..) for a Data Element using ABAP code.
    Does anyone know how to do this ? Is there a Function Module available for this purpose ?
    Appreciate your valuable inputs.

    Hi ,
    Use the view
    DD03M
    Give
    TABNAME as table name,
    DDLANGUAGE = EN / sy-langu
    and order by position. (for correct sequencing)
    You will get description of the fields (short,medium, long etc). You will also get the length and other details.

  • Create new CBO statistics for the tables

    Dear All,
    I am facing bad performance in server.In SM50 I see that the read and delete process at table D010LINC takes
    a longer time.how to  create new CBO statistics for the tables D010TAB and D010INC.  Please suggest.
    Regards,
    Kumar

    Hi,
    I am facing problem in when save/activating  any problem ,so sap has told me to create new CBO statistics for the tables D010TAB and D010INC
    Now as you have suggest when tx db20
    Table D010LINC
    there error comes  Table D010LINC does not exist in the ABAP Dictionary
    Table D010TAB
         Statistics are current (|Changes| < 50 %)
    New Method           C
    New Sample Size
    Old Method           C                       Date                 10.03.2010
    Old Sample Size                              Time                 07:39:37
    Old Number                51,104,357         Deviation Old -> New       0  %
    New Number                51,168,679         Deviation New -> Old       0  %
    Inserted Rows                160,770         Percentage Too Old         0  %
    Changed Rows                       0         Percentage Too Old         0  %
    Deleted Rows                  96,448         Percentage Too New         0  %
    Use                  O
    Active Flag          P
    Analysis Method      C
    Sample Size
    Please suggest
    Regards,
    Kumar

  • How to create new Custom XML Report without using Form Builder

    Hi,
    What are the steps to create new Custom XML Report without using Report Builder ?
    Thanks and Regards,
    Abhi

    Hi,
    Steps we now follow
    1)Create Data Model in Reports Builder
    2)Create xml
    3)Insert xml in Publisher to build Fomat
    4)FTp rdf
    5)Create Data Definition and Template
    6)Create executable and Concurrent Program
    Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
    Thanks and Regards,
    Abhijit Rode

  • How to create customer master data for walking customer in retail

    hi experts !!!!!!
    for retail industry e.g books trading industry
    how to create customer master data for walking customer in retail
    its dummy or one time customer
    if i create one time customer then same customer number can i use for every new order and every new customer how ?????
    thanks

    Dear Hanumant,
    As per my view,,
    You can use one time customer functionality to full fill your requirement.
    When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
    Same one time customer number you can use for every new order through maintaining different data.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

  • Want to create new protection group for 2 members which are already under another protection group.

    Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

    Hi,
    It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off.  If it was co-located, then the old replica and RP
    volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
    Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Creating a long text using ABAP code.. fm SAVE_TEXT

    When you create an order via IW31 one of the options is to click on the text button and create a long text. I am basically trying to mimic this action from within my ABAP code.
    The text id details are as follows:
    Text Name       500000015000046  which is (5000000 + order number)
    Language        EN
    Text ID            KOPF         Order header text
    Text Object      AUFK       Order text
    If i manually create the text within the transaction i am then able to view and update it via function modules READ_TEXT and SAVE_TEXT. But if the text has not already been created READ_TEXT obviously returns nothing as it does not exist and SAVE_TEXT does not seem to created it!
    Anyone know how i would go about creating this text using ABAP code?
    Hope this make a bit of sense
    Thanks in advance
    Mart

    I have implemented the code as i think it should be. See below, can any see what is wrong. If i add init_text it makes no difference and adding the commit_text just makes it hang
    DATA: IT_TEXTS type standard table of TLINE,
           wa_texts like line of it_texts,
           wa_txtheader type THEAD.
    wa_txtheader-TDID     = 'KOPF'.
    wa_txtheader-TDSPRAS  = 'EN'.
    wa_txtheader-TDNAME   = '500000015000056'.
    wa_txtheader-TDOBJECT = 'AUFK'.
    wa_texts-tdformat = '*'.
    wa_texts-tdline = 'hello'.
    append wa_texts to it_texts.
    wa_texts-tdformat = '*'.
    wa_texts-tdline = 'hello'.
    append wa_texts to it_texts.
      wa_texts-tdformat = '*'.
    wa_texts-tdline = 'hello'.
    append wa_texts to it_texts.
    wa_texts-tdformat = '*'.
    wa_texts-tdline = 'hello'.
    append wa_texts to it_texts.
    wa_texts-tdformat = '*'.
    wa_texts-tdline = 'hello'.
    append wa_texts to it_texts.
      wa_texts-tdformat = '*'.
    wa_texts-tdline = 'hello'.
    append wa_texts to it_texts.
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        CLIENT                = SY-MANDT
        HEADER                = wa_txtheader
        INSERT                = 'X'
       SAVEMODE_DIRECT       = ' '
       OWNER_SPECIFIED       = 'X'
      LOCAL_CAT             = ' '
    IMPORTING
      FUNCTION              =
      NEWHEADER             =
      TABLES
        LINES                 = IT_TEXTS
    EXCEPTIONS
       ID                    = 1
       LANGUAGE              = 2
       NAME                  = 3
       OBJECT                = 4
       OTHERS                = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • How to create new Partner Numbers for WE20?

    Hello colleagues!
    While creating new Source System for R/3 system in automatic mode providing existing RFC (SM59), system errored with message E0552 "Error during insert in port table".
    I tried creating new Partner Profile "FI5FIN100D" in WE20 (partner type=LS of course) by copying existing "FI2FIN200D" partner profile (LOGICAL SYSTEM also), but I received error:
    ==================
    Enter a permissible partner number
    Message no. E0342
    Diagnosis
    The partner number 'FI5FIN100D' does not exist for the partner type 'LS'.
    Procedure
    Enter a valid partner number and make sure that this partner number exists for the partner type
    ===================
    Where do I create this in BW? I tried WEDI but I received error:
    =========
    Transaction WEDI is an area menu and cannot be executed
    Message no. OZ037
    =========
    I have SAP BW 3.0b, SP 26, Basis/Abap SP 48.
    Can somebody help please?
    Thank you in advance.
    Mario Vallejo.

    Hi Mario,
           In Partner Feild u have give the Logical System Name i.e particular to the client which is already  create in SALE Transaction.It is taken by Basis People i think.I think it is already created .give that Logical sytem name in Partner Number.
    For ex Partner Number: LGS100(This is created in SALE   
                                  Tr and  assign it to 
                                  client i.e like 100 or 200)
           Partner Type  : LS
         In PostProcessing Tab
             Type : 'US' or 'o'(depending on client)
            Agent : Randomly it (Generates)creates Number
            Lang  : EN
    Hope This Help
    Sreeni

  • How to upload data into IT0000 using ABAP-HR program

    Hello,
    I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
    Thanks in advance.
    Regards
    Prabhakar.
    Message was edited by:
            Prabhakara Muthyal

    Example code for HR_MAINTAIN_MASTERDATA to COPY IT0002
    DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
    DATA: VALUES        LIKE PPROP OCCURS 10 WITH HEADER LINE,
    RETURN        LIKE BAPIRETURN1,.
    LOOP AT INT_0002_FINAL.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-PERNR'.
          VALUES-FVAL  = INT_0002_FINAL-PERNR.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-BEGDA'.
          VALUES-FVAL  = INT_0002_FINAL-BEGDA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-ENDDA'.
          VALUES-FVAL  = INT_0002_FINAL-ENDDA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-nachn'.
          VALUES-FVAL  = INT_0002_FINAL-NACHN.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-gblnd'.
          VALUES-FVAL  = INT_0002_FINAL-GBLND.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-vorna'.
          VALUES-FVAL  = INT_0002_FINAL-VORNA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-rufnm'.
          VALUES-FVAL  = INT_0002_FINAL-RUFNM.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-name2'.
          VALUES-FVAL  = INT_0002_FINAL-NAME2.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-inits'.
          VALUES-FVAL  = INT_0002_FINAL-INITS.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-famst'.
          VALUES-FVAL  = INT_0002_FINAL-FAMST.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-gbdat'.
          VALUES-FVAL  = INT_0002_FINAL-GBDAT.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-sprsl'.
          VALUES-FVAL  = INT_0002_FINAL-SPRSL.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-anzkd'.
          VALUES-FVAL  = INT_0002_FINAL-ANZKD.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-natio'.
          VALUES-FVAL  = INT_0002_FINAL-NATIO.
          APPEND VALUES.
    * maintain master data
          CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
            EXPORTING
              PERNR           = INT_0002_FINAL-PERNR
              ACTIO           = 'COP'
              BEGDA           = INT_0002_FINAL-BEGDA
    *         ENDDA           = INT_0002_FINAL-ENDDA
              SUBTY           = SPACE
              NO_ENQUEUE      = SPACE
              DIALOG_MODE        = '0'
              TCLAS              = 'A'
            IMPORTING
              RETURN1         = RETURN
            TABLES
              PROPOSED_VALUES = VALUES
    *         MODIFIED_KEYS   =
            EXCEPTIONS
              OTHERS          = 1.
          IF RETURN IS INITIAL.
            WRITE:/' Done....'.
          ELSE.
            WRITE:/   RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
          ENDIF.
          CLEAR VALUES.
          REFRESH VALUES.
        ENDLOOP.

  • How to generate new perner number using Abap Code in pa0002. what is the fu

    how to generate new perner number using Abap Code in pa0002. what is the function Module used.

    hi
    define internal number ranges for ur implementation then when u run PA 40  do not input any employee number , system will generate the employee number automatically.
    Regards
    sameer

Maybe you are looking for