How to activate data in ODS using ABAP code

Hi
Question like in subject.
THX
Adam

Hi........
U can use Program : RSDG_ODSO_ACTIVATE ...........During activation the M version will be read.
There are two other options besides the activation:
Check only >> this will only check consistency of the ODS and no activation will be executed
Clean up DDIC structures >> this deletes old generated tables, which were only necessary in previous releases
Also check this link..............it is very useful.......
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action%3fpageid=35458
Regards,
Debjani........

Similar Messages

How to upload data into IT0000 using ABAP-HR program

Hello,
I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
Thanks in advance.
Regards
Prabhakar.
Message was edited by:
        Prabhakara Muthyal

Example code for HR_MAINTAIN_MASTERDATA to COPY IT0002
DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
DATA: VALUES        LIKE PPROP OCCURS 10 WITH HEADER LINE,
RETURN        LIKE BAPIRETURN1,.
LOOP AT INT_0002_FINAL.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-PERNR'.
      VALUES-FVAL = INT_0002_FINAL-PERNR.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-BEGDA'.
      VALUES-FVAL = INT_0002_FINAL-BEGDA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-ENDDA'.
      VALUES-FVAL = INT_0002_FINAL-ENDDA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-nachn'.
      VALUES-FVAL = INT_0002_FINAL-NACHN.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-gblnd'.
      VALUES-FVAL = INT_0002_FINAL-GBLND.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-vorna'.
      VALUES-FVAL = INT_0002_FINAL-VORNA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-rufnm'.
      VALUES-FVAL = INT_0002_FINAL-RUFNM.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-name2'.
      VALUES-FVAL = INT_0002_FINAL-NAME2.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-inits'.
      VALUES-FVAL = INT_0002_FINAL-INITS.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-famst'.
      VALUES-FVAL = INT_0002_FINAL-FAMST.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-gbdat'.
      VALUES-FVAL = INT_0002_FINAL-GBDAT.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-sprsl'.
      VALUES-FVAL = INT_0002_FINAL-SPRSL.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-anzkd'.
      VALUES-FVAL = INT_0002_FINAL-ANZKD.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-natio'.
      VALUES-FVAL = INT_0002_FINAL-NATIO.
      APPEND VALUES.
* maintain master data
      CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
        EXPORTING
          PERNR           = INT_0002_FINAL-PERNR
          ACTIO           = 'COP'
          BEGDA           = INT_0002_FINAL-BEGDA
*         ENDDA           = INT_0002_FINAL-ENDDA
          SUBTY           = SPACE
          NO_ENQUEUE      = SPACE
          DIALOG_MODE        = '0'
          TCLAS              = 'A'
        IMPORTING
          RETURN1         = RETURN
        TABLES
          PROPOSED_VALUES = VALUES
*         MODIFIED_KEYS   =
        EXCEPTIONS
          OTHERS          = 1.
      IF RETURN IS INITIAL.
        WRITE:/' Done....'.
      ELSE.
        WRITE:/   RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
      ENDIF.
      CLEAR VALUES.
      REFRESH VALUES.
    ENDLOOP.

How to generate new perner number using Abap Code in pa0002. what is the fu

how to generate new perner number using Abap Code in pa0002. what is the function Module used.

hi
define internal number ranges for ur implementation then when u run PA 40 do not input any employee number , system will generate the employee number automatically.
Regards
sameer

Improve data load performance using ABAP code

Hi all,
I want to improve my load performance using ABAP code, how to do this?. If i writing ABAP code in SE38 how i can call
in BW side? if give sample code to improve load performance it will be usefull. please guide me.

There are several points that can improve performance of your ABAP code:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
4.Avoid using nested SELECT and SELECT statements within LOOPs.
5. Avoid using INTO CORRESPONDING FIELDS OF. Instead use INTO TABLE.
6. Avoid using SELECT * and select only the required fields from the table.
7. Avoid Executing a SELECT multiple times in the program.
8. Avoid nested loops when working with large internal tables.
9.Whenever using READ TABLE use BINARY SEARCH addition to speed up the search.
10. Use FIELD-SYMBOLS instead of a work area when there are more than 200 entries in an internal table where some fields are being manipulated.
11. Use MOVE with individual variable/field moves instead of MOVE-CORRESPONDING.
12. Use CASE instead of IF/ENDIF whenever possible.
13. Runtime transaction code se30 can be used to measure the application performance.
14. Transaction code st05 can be used to analyse the SQL trace and measure the performance of the select statements of the program.
15. Start routines can be used when transformation is needed in the data package level. Field/individual routines can be used for a simple formula or calculation. End routines are used when you wish to populate data not present in the source but present in the target.
16. Always use a WHERE clause for DELETE statement. To delete records for multiple values, use SELECT-OPTIONS.
17. Always use 'IS INITIAL' instead of equal to '' because null for a character is '' but '0' for an integer.
Hope it helps.

Create new survey data for opportunity using abap code

Hello to all,
I have one requirement.
create survey data for given opportunity ID using abap code. or copy survey data from one opportunity to another opportunity using abap.
any ideas..
many thanks
Babu

Hello Babu,
You can do this through the CRM_ORDER_MAINTAIN FM, this is the generic FM to edit any transaction in CRM.
The FM contains an internal table IT_SURVEY that must be filled. Actually, this table will only contain a reference to the (completed) survey, it doesn't store the data of the survey itself.
For some example coding, take a look at the SrvTSurvey.do controller. If you want to see what data is stored in the IT_SURVEY table, create a transaction and attach a completed survey to it (you can easily do it in the standard views of the webclient) and take a look at the survey structure in the CRM_ORDER_READ FM/Report.
Let me know if you need more guidance,
Reward points if useful,
Regards,
Joost

HOW CAN I MARK A CHECKBUTTON USING ABAP CODE?

HOW CAN ALL THE CHECKBOXES IN MY ALV BE MARKED WHEN I CLICK ON A BUTTON?

HI,
check this code.
TABLES:SSCRFIELDS.
PARAMETERS:c1 AS checkBOX,c2 AS checkBOX,
c3 AS checkBOX,c4 AS checkBOX.
SELECTION-SCREEN PUSHBUTTON /10(5) BUTTON1 USER-COMMAND ABCD1.
SELECTION-SCREEN PUSHBUTTON 20(7) BUTTON2 USER-COMMAND ABCD2.
INITIALIZATION.
BUTTON1 = 'Check'.
BUTTON2 = 'Uncheck'.
AT SELECTION-SCREEN.
case SSCRFIELDS-UCOMM.
when 'ABCD1'.
c1 = 'X'.
c2 = 'X'.
c3 = 'X'.
c4 = 'X'.
when 'ABCD2'.
c1 = ' '.
c2 = ' '.
c3 = ' '.
c4 = ' '.
ENDcase.
rgds,
bharat.

How-to trigger a process chain using ABAP?

Does anybody know how to trigger a process chain using ABAP code?
Any help would be appreciated!
Thanks
Ioan

Hi Ioan,
try this in your ABAP:
    CALL FUNCTION 'BP_EVENT_RAISE'
      EXPORTING
        eventid         = 'Your Event'
        eventparm       = 'START'
        target_instance = ' '
      EXCEPTIONS
        OTHERS          = 01.
and schedule your process chain, waiting for 'Your Event'.
regards
Siggi

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

How to upload an excel file using ABAP.

Hi,
Can anyone please help me in understanding how to upload an excel file using ABAP.
Thanks!!

http://diocio.wordpress.com/2007/02/12/sap-upload-excel-document-into-internal-table/
check the link
TYPES: Begin of t_record,
name1 like itab-value,
name2 like itab-value,
age   like itab-value,
End of t_record.
DATA: it_record type standard table of t_record initial size 0,
wa_record type t_record.
DATA: gd_currentrow type i.
*Selection Screen Declaration
PARAMETER p_infile like rlgrap-filename.
*START OF SELECTION
call function ALSM_EXCEL_TO_INTERNAL_TABLE
exporting
filename                = p_infile
i_begin_col             = 1′
i_begin_row             = 2′ Do not require headings
i_end_col               = 14′
i_end_row               = 31′
tables
intern                  = itab
exceptions
inconsistent_parameters = 1
upload_ole              = 2
others                  = 3.
if sy-subrc <> 0.
message e010(zz) with text-001. Problem uploading Excel Spreadsheet
endif.
Sort table by rows and colums
sort itab by row col.
Get first row retrieved
read table itab index 1.
Set first row retrieved to current row
gd_currentrow = itab-row.
loop at itab.
Reset values for next row
if itab-row ne gd_currentrow.
append wa_record to it_record.
clear wa_record.
gd_currentrow = itab-row.
endif.
case itab-col.
when 0001′.                              First name
wa_record-name1 = itab-value.
when 0002′.                              Surname
wa_record-name2 = itab-value.
when 0003′.                              Age
wa_record-age   = itab-value.
endcase.
endloop.
append wa_record to it_record.
*!! Excel data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/     sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop.

Changing Field Label length for Data Element using ABAP code.

Hi Experts,
We have a scenario where we have to update the maximum length of the various Field Labels (Short, Medium, Long..) for a Data Element using ABAP code.
Does anyone know how to do this ? Is there a Function Module available for this purpose ?
Appreciate your valuable inputs.

Hi ,
Use the view
DD03M
Give
TABNAME as table name,
DDLANGUAGE = EN / sy-langu
and order by position. (for correct sequencing)
You will get description of the fields (short,medium, long etc). You will also get the length and other details.

Activate data in ODS

Hi Gurus,
Im loading data from ods to ods thru full update and after that I have to activate that ODS,
Kindly let me know the steps for activating the ODS,
right click on the ods and press activate data n ods
or before i have to do Update ods in data target.
Raj

1ST we have to go for ODS in Data target and right click on the ODS.
In that options click on Generate Export Data Source.Then go to Source system to identify the Data Source.
It will starts with 8 later What everyou had given the ODS name you have to give in Search.
Later you have to create infopackage for that ODS and load data in to that IP.
next come to Data Target and create the new ODS.
Give the update rules with the data source what ever you had created now.
later you have to create info Package for that ODS and load the data for that IP.
Hope it will helps you..........

In ecatt - how to check at database level using ABAP

Hi,
How to check at database level using ABAP in Ecatt tool.
say,for example I want to check a particular sales order is invoiced or not ,at the database level and if it is invoiced I have stop proceeding to invoicing of that sales order number.
Could anybody suggest on this with an example?
thanks.

Hi,
you can use the command GETTAB to access single db records.
Full specified or partitial specified keys can be use at GETTAB. It will return always only one record, also if a couple could match your selection.
For more advanced scenarios you can also use eCATTs Inline ABAP. In a block between the commands ABAP. ENDABAP. you can code ABAP statements, e.g. SELECT ... INTO TABLE ...
eCATT script parameters of type 'V' defined in that script using ABAP/ENDABAP will be transfered into the ABAP block and back to script after ABAP perform.
Best regards
Jens

How to Use CMOD and SMOD in SAP using ABAP Code

Hello anyone,
Please help me How to use CMOD and SMOD in SAP using ABAP code.
Give Me Some Sample Example.
Mail ID: [email protected]
Thanks,
Regards,
S.Muthu,
SAP Developer.

Hi,
User Exits.
http://www.erpgenie.com/sap/abap/code/abap26.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
customer exits
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Menu Exit.
http://www.sappoint.com/abap/spmp.pdf
http://www.sappoint.com/abap/userexit.pdf
http://www.sapdevelopment.co.uk/enhance/mod_sapmenu.htm
http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html

How to activate data in ODS using ABAP code

Similar Messages

Maybe you are looking for