Create new user exit variable

Hi all,
   I am on BW 3.5. I need to create a variable where by I take a material qty (from a field in my cube) and in a report multiply it by a dimesnsion figure (from the material master) to get a total volume. For example, material x has a qty of 3, and a volume of 4 ft3 per unit. 3 times 4 cubic feet equals 12 cubic feet. What I want to be able to do is go into the BEx, and in my query create a new calculation using a formula variable.
   I think this is done in CMOD, but I'm not sure. Does anyone know how to do this? How do I even create the variable - I don't want it for a specific characteristic - I want a formula variable. I've got the code I need for the volume calculation - I just need the logisitcs of how to create and implement it.
   Thanks.
Dave

HI
kindly follow the below steps (you will come to know whether the user variable enhancement RSR00001 is already created or you need to create the same
Go to transaction CMOD to create a project for your enhancement.
Give a name to the project,
click on create and save the project.
Then assign an enhancement RSR00001 to your project and save. (In this step an error message u201CSAP enhancement RSR00001 already belongs to project NAMEu201D may appear.
That means an active project with the enhancement RSR00001 already exists.
NOTE: If this is the case, you do not need to create your own project and may terminate this step.
Go to a transaction SE80
display a Function Group XRSR,
open Function Modules Folder and
double click on an EXIT_SAPLRRS0_001.
A source code for the EXIT_SAPLRRS0_001 function module opens. Double click on a word ZXRSRU01. You arrive to a source code for the Include ZXRSRU01(at the bottom).
In the source code for Include ZXRSRU01 insert your code.
also refer to below link with reference to user exit on the cal day
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Thanks

Similar Messages

Need help in creating a user exit variable

Hi all,
I have created a query in which a key figure needs to be automated with an user exit variable.I want to derive the value of this key figure 'x' based on calender month.
This key figure should get the cumulative value from the first month of the fiscal year till the calender year month entered while executing the query.
I got a basic understanding on the User exits from SDN. But Im not sure how to implement this logic.
I would really appreciate if you could provide me a detailed explanation of how to do this.
Thanks in advance,
Vinoth

Hi
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6378ef94-0501-0010-19a5-972687ddc9ef
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2d99121a-0e01-0010-e78c-b1ae566a2413
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/how-can-i-set-bex-variables-in-i_step3-exit_saplrrs0_001-335232

How to select several values from a user exit variable in a planning folder

Hello,
I have created a user exit variable for limiting the values only to which the user need to access.
For a simulation part, it is then necessary for him to select several values from these values (not only one, and not all)
But It seems in this case the user has only two possibilities :
- keep all the values without any restriction
- restrain the selection to only one value.
It seems possible for the user to access to a multiple choice window, but this possibility doesn't seems to work : in all tests we did, only the first value was taken into account by BPS.
If this method is not good do you know an other manner to permit the user to choice several values amongst a set of pre-selected (because the original set is too important) values ?
Thanks for your help.

Hi Mayank,
Thanks for your response, but I don't think it corresponds to my problem.
I my case, I use a user exit variable to filter some data. It seems BPS offers the possibility to the user to select several values amongts the pre-selected values presented by the user exit variable, but it doesn't work. We can use a popup in which we enters the required values, but in final, only the first value is taken into account.
I don't know if it is due to a BPS bug or if it is not a good solution in regard to BPS philosophy. In this case, the concerned caracteristic isn't in the header but in lead columns.
I must present a solution to my client next monday, so I have not enough time to open an OSS message.
An alternate solution should be interesting too.
My need is to present to a user a selection of values amongst all values from an infoobject (the user exit variable seemed to be a good solution) and the user must have the possibility to select some values amongst these as filter.
Regards

BPS User Exit Variable based on Planning Package Selection

Hi,
I'm implementing a SAP BW-BPS planning layout to be integrated into the CRM we user interface.
Most of the characteristic selections come from the CRM fields that need to be filled by the user when creates a trade promotion.
The charcteristic selections work (as standard) just if in the planning level I flag "Selection in Package", then in package these selections are dinamically defined from what the user select in the CRM fields at runtime.
My problem is that I have to build a BPS User Exit variable to filter, in the planning level, the proper Planning Area based on the CRM Sales Organization value.
The characteristic CRM Sales Organization belongs to whose chararcteristic the value is determined dinamically in the planning package.
Is it possible for a BPS user exit variable, set in the planning level, to catch the value of a characteristic selection made at planning package?
Many thanks for your help.
Alessandro

Hi Indu,
Many thanks for your answer.
I have already took a look at the document posted by you but I didn't find the solution to my problem.
This because i have to create a user exit variable that need to get the value of the characteristic selection in package.
I mean in the planning level I will have the user exit variable that restrict the planning area and, his function module, need to read, at runtime, what is the value of the characteristic CRM Sales Organization restricted in package by CRM.
So I don't have any idea to which BPS internal table I have referred to in my funcion module to catch the value of the CRM Sales Organization dinamically filtered by CRM.
Many thanks,
Alessandro

User Exit Variable picking values from InfoProvider

Hi,
I've created a User Exit variable (of type Interval, Mandatory) on 0CALMONTH and populating it in exit.
The problem is at the time of query execution, I get "BRAIN 657" error i.e. "Value <value> is Invalid for Variable <variable name>".
After doing some analysis I figured out that once the user-exit code is performed, system validates the entries populated in this Variable against the values in InfoProvider and gives error when it doesn't find those values.
E.g. lets say InfoProvider has values for 0CALMONTH from 06.2010 till 10.2010 and if I populate my variable with range 03.2009 till 12.2010 then it throws above error. But if I populate the variable with exact values i.e. 06.2010 till 10.2010 then it works.
Any idea how can I remove this validation and populate with my own value range?
Regards,
Vikrant.

hi remove that default value from the variable.
and you shd be able to run the query without any problem.
regards,
VJ

User Exit Variable for Bex in CMOD (ABAP Code)

Hi Experts
My requirment is to develop a Restricted Keyfigure...
The restriction is based on 0Calmonth (Calendar Year/Month)
The sales from beginning of calendar year up to last "closed" month in a Calendar.
Ex: in June i want to see 01.01.2009 to 31.05.2009 data.
    in October i want to see 01.01.2009 to 30.09.2009 data.
When user execute the report
    in Jan 2010 i want to see 0 as there is no closed month in that particular year.
    in Fed 2010 i want to see 01.01.2010 to 31.01.2010 data.
For that purpose i need to create a User Exit variable in CMOD...
I am struggling to get an idea on how to write a code to meet the requirment
Please help me with code that i can use in cmod
Thanks in advance

Hi,
Use the following code :
when' variable name ' .
DATA : year(4) type n,
month2(2) type n,
date_in type sy-datum,
date_op type sy-datum.
IF I_STEP = 1.
CLEAR L_S_RANGE.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
month2 = sy-datum+4(2).
if month2 = '01'.
concatenate sy-datum+0(4) '01' '01' into l_s_range-low.
l_s_range-high = sy-datum.
else.
month2 = month2 - 1.
clear : date_in, date_op.
concatenate sy-datum+0(4) month2 '01' into date_in.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
EXPORTING
    DAY_IN                  = date_in
IMPORTING
   LAST_DAY_OF_MONTH       = date_op
EXCEPTIONS
   DAY_IN_NOT_VALID        = 1
   OTHERS                  = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
concatenate sy-datum+0(4) '01' '01' into l_s_range-low.
l_s_range-high = date_op.
endif.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
I dint know what output do you want if the current month is jan.
I have put it as 1st jan till current date.
Modify it if you need.
Regards,
Mansi

Hi experts i would like to know about user exit variables?

Hi there experts,
sorry for being pain, can some one give me an idea about what are user exit variables and where are they used ?cheers thanks.

Hi,
1)for example user when ever executes his report he wants only for current date by default
then u create the user exit variable on 0calday example as 'zcedate'
then go to the tcode CMOD here create the project then go to the Exit_saplrrso_001
here u can insert the code like as below
when 'zcedate'.
clear l_s_range.
l_s_range-sign = 'i'.
l_s_range-option = 'eq'.(if it is between two dates then l_s_range-option = 'bt')
l_s_range-low = sy-datum(if it is range l_s_range-low = 'may be any date or by using sy-datum - )
append l_s_range to e_t_range.
like this we can start and write for month to date and week to date by using the FM week_get_first_day and dat_get week
and for year to date by using the FM first_and_last_day_in_year_get
if u have any detailed pls ince again tell me which are things u required.
thanks for giving this oppourtinity.
Thanks & Regards,
k.sathish

User-Exit Variable Scenario

Hi,
I have a multiprovider M1 over two cubes C1 and C2. User reports on this Multiprovider M1.
C1 has keyfigure K1 which holds activity values for each Calendar Year Month.
C2 has keyfigure K2 which holds only Inception to Date values for each Calendar Year Month.
User needs a report which displays Activity values for both K1+K2 for each calendar year month(for the range he gives).
To calculate activity value per month for K2, we need to get Change in the Inception to Date values between current month and the prior month.
So, as per the user requirement, if for example we need activity for Jan 2006, the value he needs would be
K1(jan 2006) + K2(jan 2006 - dec 2005).
I created 2 user-exit variables V1 and V2 based on the characteristic Calendar Year Month having a variable V0(Interval, mandatory).
V1 takes the "low" value and V2 takes the "low + 1" value of V0.
In the columns panel of the BeX designer, I created a structure S1 which contains keyfigures K1(V1), K2(V1) and K2(V2). I made a formula, "K1(V1) + (K2(V2) - K2(V1))".
I put the calendar year month characteristic with variable V0 in the filters panel. Ran the query with a wide range 01/2004 to 12/2006. It gave me results for only first 1 month (01/2004).
I moved the calendar year month characteristic with variable V0 into the columns panel on the top of the structure S1. Ran the query with a wide range 01/2004 to 12/2006. It gave me results for only first two months (01/2004 and 02/2004). But, unfortunately either of K2(V1) or K2(V2) is blank for each month.
Anyways, I was able to successfully get what user wants by keeping V0 in filter panel, but could make it just for 1 month. But, I want this to be extended over all the months for the range user gives.
Can anyone suggest a good way to do this? Hope I did not confuse you with lot of information.
Thanks,
Sai.

Hi,
1.
Change V0 to single value (mandat.)
2.
Put restriction [V0-1; V012] (value restr. from V0-1 to V012) in filter panel for char Calendar Year Month.
3.
Define 13 Customer-Exit Variables:
V1 for -1 period () of time interval (from char. Calendar Year Month),
V2 for 1 period of time interval (from char. Calendar Year Month),
V13 for 12 period of time interval (from char. Calendar Year Month).
4.
Create 13 Selections (always hidden):
Sel1 for V1,
Sel2 for V2,
Sel13 for V13.
5.
Make 12 formulas. In every formula you can use
all of these 13 selections.
Yes, it is not a perfect solution, but hope it helps.
But Cell editor is a killer for perfomance

How to create an user input variable for customer exit variable? - BW3.5

Hi Guru,
I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable:
1. Month: Current reporting month
2. Fiscal Year to Date
3. Project Year to Date
Here I need 2 variable to do these, 1 customer exit and 1 user input variable. I have created a variable customer exit to calculate all these requirement. But can any1 tell on how to create the user input variable for my customer exit? I need a user input variable with drop down list like below.
01-Current month
02- Fiscal Year to Date
03-Project Year to Date
I have create a new master data for this variable, but it's not working. What I need now is a standalone master data which do not need to link to any exiting records. Can any1 tell me how to create this?

Just go to the definition of the variable for which you have created a customer exit. There you will find a check box for "Ready for Input". Just tick that checkbox and the variable will be available as a selection variable in the reports selection screen.
Regards,
Yogesh

User-Exit Variable

Hi, I created a simple user-exit variable and for some reason the variable seems to get executed around 16 times and then the query gives me the below error messages.   Any ideas why my variable would have I_STEP = 2 many times before it bombs out?
Note: This variable is based on a Virtual Characteristic I just implemented and is probably related. The query did not fail before trying to implement this user exit based on the Virtual Characteristic.
Error for variable in customer enhancement ZVRSR_001
Incorrect call of OLAP layer CL_RSR_OLAP; error in BW-BEX-ET
*~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
* Load Variable with NCI Authorized Sales Rep (Sales Group)
*~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
WHEN 'ZVRSR_001'.
    IF I_STEP = 2.                         "after the popup
      DATA: LT_REP    TYPE /BIC/AZ_P_O04300.
      DATA: LV_REP    TYPE /BI0/OISALES_GRP.
      SELECT SINGLE * FROM /BIC/AZ_P_O04300 INTO LT_REP
           WHERE USERNAME = SY-UNAME.
      IF SY-SUBRC = 0.
        W_L_S_RANGE-LOW = LT_REP-/BIC/ZSHTO_GRP.
      ELSE.
        W_L_S_RANGE-LOW = '???'.
      ENDIF.
      W_L_S_RANGE-SIGN = 'I'.
      W_L_S_RANGE-OPT = 'BT'.
      APPEND W_L_S_RANGE TO E_T_RANGE.
    ENDIF.
ENDCASE.

OK, It looks like because it is a Virtual Characteristic that the User Exit Variable Code will be called every time the "Virtual Characteristic" code is executed as well. The real problem seemed to be that I had used a BT in the Variable User Exit Range. Once I changed that to "EQ' it works fine now. Thanks

HOW TO CREATE A CUSTOMER EXIT VARIABLE

<Moderator Message: use lower case letters next time, we don't want you to shout. --> see rules of engagement>
hi,
How to create a customer exit variable..!
in a query designer i have created the customer exit variable ,in the cmod i have created the project
for the exit rsap0001 and kept the break-point....but when i executing the query via BEX-Analyzer
where control not stoping in the break-point..
can any one help me ..what is the approch i need to do.because i new to BI..
Regards,
shahina.....!
Edited by: Siegfried Szameitat on Dec 17, 2008 10:37 AM

Hi Shahina,
1. Create formula variable var1 from to date using replacement path.
2. Create another formula variable var2 for current date using customer exit or you can use standard
formula variable for current date
3. Create calculate key figure ckf using var1 & var2.
ckf = var1 - var2.
Thanks == points
Regards
Sudheer
Edited by: SUDHEER on Dec 17, 2008 10:41 AM

BI 7 Bex Query - User exit variables after variable screen re-processed

User exit variables are not re-calculated after the variable screen is called up to re-run report with a new selection. Is there some way to force the user exit variables to change? I am aware of note 1064273 but this doesn't seem to help in these circumstances.
Example:
My Bex Query uses OI_FYPER for a static characteristic selection and I have defined a customer exit formula variable which uses the values in OI_FYPER.
All works fine when the query is run first time but if the user calls up the variable screen to change the selection and re-run the query, the customer exit formula variable is not re-calculated (customer exit is called but only with ISTEP = 3).
Software version is NS2004S (BI 7.0) SPS10, BI ABAP SP11, BI JAVA SP10, BI Front End Package 1401 rel 354.

hi.. i just came to know about this in another thread..
I_STEP 3 does not have I_VNAM stored. So, to access values at I_STEP3 :
data: l_range TYPE RRS0_S_VAR_RANGE.
if I_STEP = '3'.
read table I_T_VAR_RANGE into L_RANGE with key VNAM = 'OI_FYPER'
if SY-SUBRC = 0.
...code as required...
endif.
endif.
Customer-Exit for analysis Authorizations: i_step = 3, i_vnam is empty

How to create an user input variable in SEM-BPS?

Hi,
anyone please guide me how to create an user input variable in SEM-BPS? I want to utilized user input variable to udpate characteristic with repost function.
I tried to create in planning folder, variables right-click create, but the system said 'operation cannot be executed here'...
please help....
thanks.

Hi Bindu,
would you give me one more help,
I want to use the variable created for a repost process, how do I achieve that?
My scenario:
- There will be a repost function on the planing folder
- User can select a row or many rows then click the repost function button, then a popup window will appear for user to input the value for the variable
Is it possible with the scenario? Please advise if I can use standard repost function or should i create a FOX or exit function for this purpose.
thanks.

Error rro01_s_rkb1f unknown when creating a customer exit variable.

Hi,
I am creating a customer exit variable( i am new to abap).I wrote the code and when i am activating it i am getting the "error rro01_s_rkb1f unknown". I double clicked on that and i saw that it is Declared in RRO01 as TYPES: rro01_s_rkb1f as rrkb1f.
And when i saw this rrkb1f it was not active , then i activated it.Even then i am getting this error.
Can anyone help me on this.
Thank you
mandha

hi,
I solved it some type pools wer not declared.

User exit variable I_STEP=1 does not show default value WebI selection scr

Hello,
We have a BW query with a user exit variable. We have written user exit code under I_STEP = 1 so that the default value for the field is displayed on the selection screen to the user. Works very well on the BW side.
We based a universe on top of the query and then created a WebI report.
When the WebI report is executed the default value is NOT seen on the selection screen,
Note:
1. If the user exit variable is optional and we execute the report, the default value is NOT seen on the selection screen. However if the report is executed without entering any value for the field the logic under I_STEP = 1 is picked up and the report gets the correct output
1. If the user exit variable is mandatoryand we execute the report, the default value is NOT seen on the selection screen. The user now has to enter the value for the field.
The scheduled reports will work in case of optional user exit variable.
However this amounts to loss of functionality.
Is this a known bug?
Is there a way to display default values based on user exit variables on the WebI selection screen?
Kindly advice. Btw we are on XI 3.1 SP3
Rgds
Edited by: Anup Deshmukh on Jun 29, 2010 11:13 PM

OSS Note 1285993 - "Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe" deals with this issue and has deemed it out of scope for XI 3.1 SP3.
Rgds

Create new user exit variable

Similar Messages

Maybe you are looking for