Create PM Sub order from maintenance plan

Hi all,
Scenario is:
Right now client is making seperate order for related equipments like for motor,pump.and issuing the permits for them seperately.
But is there any way to generate order and related sub orders from maintenance plan for these related equipments,so that they can issue permit in single main order for all the related equipments using sub orders.
Is there any user exit for generating sub order from maintenance plan.
Thanks
Rachit Bhutani

Hiii
You can also use the path as follows.
Open the order in change (IW32 Transaction code) for which you want to create the sub-order.
Then follow the path as Order -
> Create Special -
> Suborder.
This will bring you on suborder creation screen (IW36) there superior order is copied from the order for which you have entered on this screen.
Regards

Similar Messages

BAPI or FM to create Prod. Orders from partial planned order (like CO48)

Hello everyone.
    I need create a Prod. Order from a planned order, but only converting this one partially, as in tx co48. Do you know any Bapi o FM or I only have the Call transaction option???
Thanks a lot.

IMH wrote:
Hello everyone.
>
>     I need create a Prod. Order from a planned order, but only converting this one partially, as in tx co48. Do you know any Bapi o FM or I only have the Call transaction option???
>
>
> Thanks a lot.
I don't think we have many BAPI's in the PP module. I guess recording is the option.

Calibration Order from maintenance plan

Hi All,
We have assigned inspection point 300 in task list. And inspection type 14 is assigned to the order type.
When I create the order manually by IW31 then I am getting the inspection lot but when creating the Maintenance Plan with the same order type and task list, the lot is not generated.
Pls suggest is there any QM or PM setting missing ??
Thanks,
Sanjay

Dear Sanjay,
Make sure you have assigned the inspection characteristic and sampling procedure for your individual task list operations.
Please do confirm the same and do reply.
Regards,
Chintan

Order from maintenance plane

hi experts,
after maintenance plane execution order is genrated , but i can not see it in iw38 but after go to ip10 check there order ,save and again check it in iw32 then it is present how it is , i am confuse please tell me exact what happen in this condition
thanks
suhas

hi
what do you mean by Maintenance plan execution?
the process flow is like this
create a maintenace plan with required frequency
Run the IP10 for the maintenace plan you have created( system will calulate the plan date if the date is already passed system will create an order and will say scheduled save to call hence when you save it will generate an order)
i think you forgot to save ,kindly check once again and revert back
regards
thyagarajan

Generate order from Maintenance Plan

Hi Experts,
We use maintenance plan type PM that will generate maintenance order during maintenance call. It work fine for some time. The initial config for the order has Plant Section as mandatory. However when we changed the config to make the Plant Section not mandatory (as input only), we hit error during maintenance call. Any ideas how to get around this issue? Thank you for your help.

Hi,
Your Plan was created earlier so the call is in backdate when plant section was mandatory.
Generate a new call it should not give error.
Ramesh

What is the best practice in order to create flow in a single maintenance plan?

Hi All,
What is the best practice in order to create flow in a single maintenance plan.
1st Check Database Integrity (Check DB)
2nd Rebuild Index
or
1st Rebuild Index
2nd Check Database Integrity (Check DB)
Grateful to your time and support. Regards, Shiva

Use the Maintenance Plan Wizard to create a maintenance plan:
"This topic describes how to create a single server or multiserver maintenance plan using the Maintenance Plan Wizard in SQL Server 2012. The Maintenance Plan Wizard creates a maintenance plan that Microsoft SQL Server Agent can run on a regular
basis. This allows you to perform various database administration tasks, including backups, database integrity checks, or database statistics updates, at specified intervals."
LINK: http://technet.microsoft.com/en-us/library/ms191002.aspx
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Create a notification order from IW22 versus IW28

When I create a notification order from a notification from IW28, I click the "Create Order" button and it takes me into IW34 where I can enter the Order Type.
When I go into the notification(IW22) from IW28 and click create order from IW22, the popup only shows me "PLanning plant" and "Main work center". When I continue I get an error stating that the order type is not maintained.
Is there somewhere in the IMG where I need to put order type on the popup to create a notification order from IW22?
Please let me know if this is confusing.
Thanks
Jayden

Hi Jayden,
if you use for every notification type exactely one order type, you should define this in IMG in step "Order Type by Notification Type (goto Maintenance and Service Processing / Maintenance and Service Notification / Notification Creation / Notification Types / Assign Notification Types to Order Types.
I've checked your problem in our system and all things runs well, from IW22 the same like IW28.
One question: If you called IW28 you get a list with notifications, right? Why do you open as first the notification and create than the order? The easy way is to create the order direct from list by mark the notification and click on button "Order" (with the blank paper) in Top of the screen.
Jens

Calling external services from maintenance plans

How to assign service packages to framework order?How the value limit is assigned in the framework order?
How to create a settlement order?

Hi
I think you are looking for directly calling services (Calling Service entry Sheet) from maintenance plan.
For that you have to create a purchase order or framework order with account assignment category as U or F and item category as D. Here you can assign your services directly in frame work order.
Settlement Order you can create as normal order IW31 purpose is to capture the cost on order for all the services.
Then you can create a Maintenance plan and after scheduling a service entry sheet will be called directly from the maintenance plan as per your cycles.
Hope its as per your requirement.
Shail

How to change the main work center and work center of each operation when generating work order by maintenance plan

Dear experts,
I face a problem that system get main work center from equipment master data as a default main work center in maintenance plan when creating maintenance plan. however, if main work center in equipment is changed later, the change will not synchronize to related maintenance plan. if work order is generated from maintenance plan, main work order in order is defaulted from maintenance plan instead of updated work center in equipment.
another problem is that, for those orders generated by maintenance plan, the work centers in operations is defaulted from task list in maintenance plan. in most case, work center in task list is dummy. Actually the work is done by work center in equipment master data.
My expectation is how to auto replace the main work center and work center of operations in work order with the one in equipment master data if order is generated by maintenance plan? is there any standard configuration or enhancement/BADi that can help with this requirement?
thanks！
Wesley

Wesley,
Sorry - development is the only way.
Another option is to create a batch program that runs before your IP30 run(s) and updates any maintenance items and task lists with the correct work centres.
PeteA

Create multiple sales orders from single service notification?

Is it possible to create multiple sales orders from a single notification (IW51)?
We currently create sales orders directly within transaction IW51 (Create Service Notification). We kick off the sales order creation by pressing the "SALES ORD." button in the notification screen. We're now interested in creating a 2nd Sales Order which would tie directly to the same Service Notification. This is so that we can have the second order assigned to a different account assignment WBS (there are two different parties doing work on the service notification).
I assume you would have to go to VA01 to create the Sales Order, but am not sure how to tie it directly to the service notification from here. I treied to do a create with reference, but there is no ability to create with reference to a service notification.
Do I have to create a second service notification for the 2nd Sales Order for this to work? I want to avoid doing this if at all possible.
I'm running SAP R/3 Enterprise
Thanks for your help!

Hi,
go to vtaa- copy controls for sales document to sales document.
select your combination of order and quotation go to item level. There select value 0(zero) in field positive/negative negative.
No need to change update document flow.
After setting zero in copy control that be told on above. create order with respective to the quotation.
After saving the order.
go to document flow to see the status in between quotation and order.
If you placed setting right, then u certainly observe for quotation status will be open. so you can create no. of sales order with respect to that quotation..
Have a good day..

How can I create a single order from multiple quotations?

How can I create a single order from multiple quotations that I have created by the transaction VA21 ?
Thanks in advance for the answers.

hi
Go to transaction: /nva01
Enter order type : ZOR
Sale org :xxxx
Dist.channel:xx
Division :xx
Press enter
Click on Sale document and select Create with reference
Then enter 1st quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation1 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 2nd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation2 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 3rd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation3 copy to order.
Now save the sale document.
Kindly give reward points
Edited by: WISH on Mar 19, 2008 2:25 PM

Error V2 005 when creating a sales order from a quotation

I hope someone can come up with some ideas to help me with this error. My client is creating a sales order from a quotation and immediately on the first screen the error V2 005 pops up. The quotation was not created with reference to any previous document, and at this point not sold-to party has even been copied through to the sales order.
To make this error more interesting, this is only happening with 1 particular customer.
I have checked: credit management, customer hierarchies, material determination, customer info records and none of these are in use.
Can someone please come up with some ideas?
Thanks and regards
Kikas

Dear Sai,
Thanks for this note I am going to try it, however I have some concerns because the issue is only happening in production, with 1 custoemr only, and QA is an updated copy of production and I could not replicate the error in QA using the same customer....
If anyone has any other ideas please I would appreciate it
thanks
Kikas

Unable to create a Purcahse order from Proman-System is hanging

Hi All,
I am unable to create a Purcahse order from Purcahse Requisition from Proman.
When iam executing the Function, convert Purchase Requisition to PO, after giving the required inputs like Vendor,Purcahse Org,Pur Group, Company, system giving the information that, Purcahse order is created with number and ask to proceed further.
When i click, system is hanging and unable to proceed further and when i check the PO, There is no data available in the PO's/
Regards,
N.Raju

Hi Nitin,
Iam getting the PO Number is generated information with Number. But that number is not available in the system.
Any clue for this.
Regards,
N.Raju

How to create a Return Order from a Quality Notification?

Hi everyone at SDN.
Really need some help on this issue we are having. We want to create a Return Order from a Quality Notification, ie. the document flow should be:
:: Serv. notif 000200000482
   :: Return Order 0060299453
In the SAPGUI we are able to do this by going into transaction QN02, enter the notification number and in the menu: "Notification" --> "Functions" --> "Sales Order" --> "Create Selection of Order Type". Now we select the Return Order type and the result is as wanted.
However, we want to do all this in ABAP instead. The BAPI I have tried with is BAPI_CUSTOMERRETURN_CREATE.
And the following code is used:
    ls_order_h_in-refobjtype = 'BUS2078'. "Quality Notification
    ls_order_h_in-refdoctype = 'Z5'. "Quality Notification type
    ls_order_h_in-refobjkey = '000200000482'. "Ref. Quality Notification
    ls_order_h_in-doc_type = 'ZREN'. "Return Order type
    ls_order_h_in-sales_org = 'S001'.
    ls_order_h_in-distr_chan = '01'.
    ls_order_h_in-division = '01'.
Then I add a material as well as the mandatory partner functions. When I execute the Return Order is created but when I check the document flow for the Return Order there is no link to the Quality Notification.
Any suggestions on how to do this? I have tried using FM RV_DOCUMENT_FLOW_UPDATE_U for updating the document flow but it doesn't seem to like it when I enter a Notification in there. And when I run FM RV_ORDER_FLOW_INFORMATION for the above (working) Return Order there is no Quality Notification available. So this leads me to believe that I have to update something else then VBFA (Sales Document Flow)...
I would really appreciate all the help I can get on this.
Best Regards
Niklas

anyone?

How to create a Sales order from multiple quotations?

Hi All,
Please tell me how to create one sales order from multiple quotations?
Regards,
Maddy

Hello Maddy,
To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
It will give you a pop-up to choose your quotations item while creating the sales order.
Some per-requisites are there:
1. Copy control should be maintained between your quotation and sales order.
2. Quotation should be error free and should have the status "Released"
3. Sold to party and Organization should be same in both transaction.
For more information you can check the below link:
Processing Quotations - Sales Transactions - SAP Library
Best Regards,
Dinesh

Create PM Sub order from maintenance plan

Similar Messages

Maybe you are looking for