Create PO from SC in SOCO with status "Ordered"

Hi,
This is the scenario:
When you approve a SC in SOCO a PO is "automatically" created. But this PO is created in status "Saved".
We need to create this PO in status "Ordered".
Do you know how?
I've tried to find some place to put a enhancement point in order to pass the parameter i_save to X, only for try, but i don't find the proper place...
Thanks in advance.

Hello,
Ricardo Romero Mata wrote:
When you approve a SC in SOCO a PO is "automatically" created. But this PO is created in status "Saved".
Don't understand... There is no workflow in SoCo, so you never approved a SC in SoCo.
In SoCo, you select SC items to create follow-on document.
Ricardo Romero Mata wrote:
We need to create this PO in status "Ordered".
I guess vendor assigned to PO created is a preferred vendor (partner '00000039') and not a fixed vendor (partner '00000019').
Check your implementations for BAdI BBP_DOC_SAVE or BBP_DOC_CHANGE_BADI.
Regards.
Laurent.

Similar Messages

  • Is it possible to create in R/3 the invoices with status u0091parkedu0092?

    Hi ppl.
    We are working in EBP with extended classic scenario.
    We want to create invoices in EBP, but we want to create all invoice documents via EDI with status ‘parked’ in R/3.
    We read note 501524 (EDI: Generally parking incoming invoices). The note describes all that we want to do, but the problem is that the Function exit ‘EXIT_SAPLMRMH_014’ does not work for ‘BBPIV’ message type and the ‘IDOC_INPUT_BBP_IV’ function module.
    Is it possible to create in R/3 the invoices with status ‘parked’ for all incoming invoices created in EBP?
    Thanks and regards.

    Raul,
            Did you find a solution for this.
    We want to do the same here.
    thanks
    Sanjay

  • PO is getting created but showing error is address with status of IDoc - 51

    Hi Experts,
    I am using IDoc type  - PORDCR103
    Process code - copy of  IDOC_INPUT_PORDCR1 (Function Module)
    After processing through WE19 it is generating an IDoc number with status - 51 showing error in Address , But it is creating a PO.
    My requirement is In status -51 It should not create PO.
    Inside IDOC_INPUT_PORDCR1 a Bapi  'BAPI_PO_CREATE1' is used for creating PO. Here In RETURN parameter of BAPI a Row is comming with Message type - E.  Some other messages are also there of type 'S' and 'W'.
    After processing ,  PO is getting created with staus - 51.
    Please help me .
    Thanks
    Susanta
    Edited by: Susanta22 on Oct 11, 2011 12:29 PM

    Hi,
    in ur code ur filling the idoc data rcord, control record ryt ..before u append data to idoc data , u r also validating and u might be doing in loop for appening the idoc data.
    if there is any error in idoc then it won't distribute the data, it will be in error status only..u can only see the data in WE02. Then u can also change the data in WE02 and redistirbute it via BD87.
    if u have any conerns let me know
    Regards,
    Nagaraj

  • Newbie Question - Creating DVD from Premiere to Encore with 2 audio tracks

    Hello and thanks for your time,
    I'm pretty new to all this but seem to be getting the hang of things pretty well but one problem I'm having I can't seem to find an answer to.
    In Premiere I am creating a dvd of a football game, i have the video with an audio track of the crowd and another audio track of the commentary.  These are all edited together fine and work well.  I then use the dynamic link to send the sequence to Encore and that's where the problem occurs.
    I can't seem to get both audio tracks to appear in Encore?  Any suggetions or tips on where I might find an answer?
    cheers for the help and time
    Ian

    Ian,
    This is not a cure to the issue, but is a workaround. It's the "old-fashioned" way that things were done before DL.
    Export your Sequence as elemental streams, i.e. video-only and audio-only. Import your video-only file into Encore as a Timeline, and teh audio-only file as an Asset. From Project Panel, drag the audio to the appropriate timeline. Done.
    Now, exactly what you choose for your Export and even how you do this will depend on your Project in PrPro and also your source Assets. For SD material, I'd choose DV-AVI Type II video-only (no multiplexing), and for the Audio 48KHz 16-bit PCM/WAV. If you have a version of PrPro prior to CS4, just Export Movie (settings above) for the Video and Export>Movie (or AME) for the Audio (settings above). Just make sure that the Export Video is checked for the DV-AVI, but the Export Audio is not. Change these two checkboxes for the Audio.
    Now, for DL not working, as it should, what is the format of your source Audio? Do you have any Channel-mapping used? Does your Audio Mixer Panel show everything right there? Do you have one Audio Track either Muted, or Bypassed. Look in Audio Mixer, to make sure you do not have one Track Solo'ed.
    Also, what version are you using, CS3, or CS4? Note: for CS4, you will use AME for the Exporting in the first part of the post.
    Good luck,
    Hunt
    PS - welcome to the forum

  • PR are created automatically from MRP without Demand and Sales Order

    Hi experts,
    I used Tcode ME5A to display PR list and i see some Perchasing Requisitions created from MRP. I checked Demand by tcode MD61 and Sale Order or Delivery Order by MD04 but i see nothing.
    I don't know how can it happens. Pls give me the way to check it.
    Thank you,

    if you dont see any reason, then the reason may not be present anymore.
    E.g. the sales order got deleted.
    In this case the next MRP run will automatically remove the requisition.
    What are your settings in material master MRP view?  maybe you are below safety stock or reorder point.
    you have to look into the requistion, what item category does it have, what accounting category. Only there you can see if the PR is related to sales order or any other order.

  • How to create Analysis from two different subject areas with diff models

    Hello,
    I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
    First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
    Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
    I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
    whether it is possible to do in OBIEE?
    Please help me
    Kind regard
    robix

    Hi
    One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
    But if you indeed interested in UNION (or intersect) queries, then do this:
    Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
    Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
    Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
    Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
    That should give you a start.
    http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
    http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
    Award Points it is useful.
    Thanks
    satya

  • How to save entries in Cash Journal with status 'Posted'?

    Hi all,
    I has been asked to create entries in a Cash Journal with status 'POSTED'. Obviously, FM 'BAPI_CASHJOURNALDOC_CREATE' only saves entry (status 'SAVED'), but didn't change its status to 'POSTED'.
    After some investigation of different FM in a CJ area, I found the only way to change status via CALL TRANSACTION 'FBCJ' -> 'POST ALL' (for receipts, for example). This is not a decition I'm searching for.
    My question is: how can I change status of a Cash Journal single entry to 'Posted'?
    Any help would be highly appreciated.
    Thanks in advance.
    Regards,
    Ivaylo Mutafchiev
    Senior SAP ABAP Consultant
    VBS EOOD
    Varna, Bulgaria

    I'm facing the same  issue . have you been able to solve it ???

  • Prevent the Output Message when creating PO from inbound IDOC

    Hi SAP Gurus,
    In my project, I have to create PO from inbound IDOC (PORDCR) with a specific Document Type ('099').
    Requirement: These PO should not generate the output message while the others (Doc Type # '099') do.
    I have the Z fuction module which call BAPI_PO_CREATE for posting IDOC and it works fine.
    In the existing system, there are some set up that trigger the output message type for PO (output NEU) when using ME21 or ME22, as a result my PO created with output message.
    Can you please advise if there are some way (User Exit?) that prevent the output message in this scenario (specific PO Type) without touching the current Condition setup?
    I'm new in MM and really need help!
    Thanks,
    Elaine.

    Hi Vinod,
    I really appreciate your anwer. I'm going to explore this with my functional consultant.
    Just like to have more questions:
    1. Is it easier if we change the existing condition table instead of creating a new routine?
    2. There are two forms for routine 101 (FORM KOBEV_101 and FORM KOBED_101). Can you explain to me why we need 2 here for what purpose of each form.
    3. In the debug mode by using WE19 to post inbound IDOC, I change the SY-SUBRC = 4 and PO created without output message. Is it the right direction? Anything else I need to pay attention to?
    Thanks again.
    Regards,
    Elaine.

  • PM: Create notification from a work order using transaction IW32.

    Hi guys,
    I am trying to create a Notification for a Functional Location thru Work Order Using transaction Code IW32.
    The actual transaction works fine as below -
    1. Open a work order in change mode using T code IW32
    2. Choose tab "Objects" to see the list of functional locations.
    3. Select a line with a functional loc, for which you want to create Notification & click "Create" Button at the bottom of the list.
    4. Enter Notification type on the pop up screen & enter.
    5. Enter the activity code, text & start date on the notif create screen & click Back. You can see the temp Notif Number in the row selected from the object list.
    6. Click save on the order change screen & the Notification is saved & is associated with the order & func Loc..
    However I can not do this in a program.
    I tried using Batch Input method. It works, but the problem is if you have more than 1 page of the Objects (Func locations) in objects tab, you can not goto the next pages.
    I also tried using BAPI_ALM_NOTIF_CREATE. Which doesnot for this purpose. It tries to create Notification but can't associate with the order.
    I appreciate your help.
    Thank you,
    Raj

    Hi:
    Check with Tcode: IBIP - Plant maintenace batch input utility tool.
    Hope, it may help!
    Thanks,
    Murali.

  • Program exited with status 1

    Hi,
    While submitting the request i am getting the follwing error.can any one please help me..
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    p_org_id='121'
    p_anno='2012'
    p_batch_source_id='1115'
    p_tipo_fatt='1233'
    p_numero_da='87'
    p_numero_a='87'
    p_desname_path='/usr/tmp/statarch'
    p_nome_protocollo='CE'
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.WE8ISO8859P1
    Enter Password:
    REP-1437: Run time error in the PL/SQL development environment (DE).
    Message file unavailable (Error: REP-3335: Unhandled Internal CA Error.deper 1 REP-3335: Unhandled Internal CA Error.
    depxc 25)
    REP-1437: Run time error in the PL/SQL development environment (DE).
    Message file unavailable (Error: REP-3335: Unhandled Internal CA Error.deper 1 REP-3335: Unhandled Internal CA Error.
    depxc 25)
    REP-0002: Unable to retrieve a string from the Report Builder message file.
    REP-421490969:
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-421490969: Run time error in the PL/SQL development environment (DE).
    Message file unavailable (Error: REP-3335: Unhandled Internal CA Error.deper 1 REP-3335: Unhandled Internal CA Error.
    depxc 25)
    REP-1437: Run time error in the PL/SQL development environment (DE).
    Message file unavailable (Error: REP-3335: Unhandled Internal CA Error.deper 1 REP-3335: Unhandled Internal CA Error.
    depxc 25)
    REP-0002: Unable to retr
    Report Builder: Release 10.1.2.3.0 - Production on Thu Oct 24 11:19:44 2013
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    kgefec: fatal error 0
    kgefec: fatal error 0
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 12172406.
    Review your concurrent request log and/or report output file for more detailed information.
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    0
    Thanks,

    Hi,
    Is this a standard or a custom report? See if the following note helps you:
    R12 General Ledger Journal Entry Report (JGZZGLJRN) Errors With: REP-0069, REP-57054, REP-271504897 and REP-0002 For Large Volume Report (Doc ID 1070234.1)
    Thanks &
    Best Regards,

  • Create Project trough enterprise project type with templates does not send notification to team member(email) when published

    Hi All,
    I encountered this issue in my client site when implementing project server 2013.
    At First I thought that this issue occurred intermittently , sometimes project creation (create project from PWA- assign resources with team member -save and publish) trigger email notification to the assigned team member and sometimes not. (new task notification)
    I have checked with our infrastructure team and verify that I use the right SMTP server address and port , and cross check with them for their side configuration (exchange) , we did not find anything wrong on both settings.
    and then we found out that the failed notification email comes from project creation using defined project templates in an enterprise project type, even from a project that consist of template schedule , we added new task on that project and assign a team
    member on that task that resulted with notification sent to the team member, but not with task that comes from templates.
    can someone help us on this issue, or is there any CU on this?
    I appreciate any comments and feedback, Thanks for your attention!
    Regards,
    Nugroho
    EPM implementator

    Kirteshtiw,
    Yes we did create the template from project professional and as far as i know,
    the only way to create template is just to save it, no option to publish the template.
    When you create a new project from template for some of the task you remove the resources then assign resource to those tasks then save and publish the project.
    <--there are no resources assigned from the template, when i assign resources (new assignment) this will not trigger notification
    Or create a new task under summary task assign resource then save and publish the task you notification sent to the resource means it is working.
    <--new task (not from template ) also trigger the notification

  • Create separate reservation for supplement to a CS-order

    Hey
    We have a system where by the formation of CS orders automatically generated a reservation (Using IWxx). Attributed to several components of the order, will supplement get same reservation number as the original warrant. This is inappropriate because of date management - observation fields and subsequent follow-up. There is a strong desire to create a separate reservation on the order for each additional supplement/order - this will make follow-up - Questions on the order and printing of various documents much more simple and uncluttered.
    Is it possible to make different reservations for the same CS-order?
    It must be said, there are a lot of cost and specially created thing that is also linked with the order.
    Regards Lone

    Hi Lone Host,
    1. You have posted the Querry in the ERP-Manufacturing,
    2. Kindly post in Correct Forumto get quicker response.
    reg
    dsk

  • Scheduling Agreement with Delivery Orders

    Hi,
    When i create (LZM)scheduling agreement(Qty 10) with Delivery orders, when i create deklivery schedule
    ie
    Date                Qty
    25.10.2008      1
    26.10.2008      1
    27.10.2008      1
    in MD04 for that particular material i can see only requirement for cumulative Qty i.e. 3, &  PP guy is not able to create planned order for those dates unless i create delivery Order(TAM) for the same
    whats the solution for this?
    Regards,
    Amol.

    Hi Suresh
    The *** issued qty gets updated when the PGI for the delivery happens. There is a field called *** received by customer and it gets updated when customer sends the *** back in the 830 or 862 as the case may be.
    The difference between the *** issued and the *** recieved is always shown in transit.
    If you do not want the schedule line to be opened up, then in *** recd change it to the *** issued or ideal option is populate the last delivery PGI'd on the delivery number field next to *** recd field. Hope this helps and let me know if you need any more informataion
    Regards

  • IDoc created with status 03 checked via we02, but couldnt find in XI

    Hi all:
        Could you please do me a  favor?  implement a idoc to idoc issue. it has been created successfully .
    as It is found that the idoc created with status of 03 -
    data dispatched to  port ok (rather than 12 dispatch ok). however, I couldn't find  it via SXMB_MONI on XI,  there must be something wrong . coudl you please give me a hint ?
        Thank you very much!!!

    hi,
    you need to check transaction SM58 (remove the user from it) and F8
    it might be the reason that you didn't create a port in IDX1 on XI/PI
    but you will see that in SM58
    Regards,
    Michal Krawczyk

  • IDOC is created with status 51( application document not posted)

    Hi experts
    iam working on File-IDOC scenario, when i test the process the XML message is created with no errors and
    but the IDOC is created with status 51( application document not posted)
    the details error shows:
    An error occurred in CALL TRANSACTION USING or CALL DIALOG USING
    during a synchronous update.
    The error was caused by the transaction VA01.
    previously i used same test data that time it was working fine,
    please tell me how can i fix the issue.
    regards
    vasavi

    Key in your Idoc number in BD87, execute
    select the error message and then follow the menu path :
    EDIT --> restrict and process  (Select)
    In the next screen UNCHECK the Bkgd Processing and execute
    Now EDIT --> Process --> foreground from error or in foreground mode.
    This will lead you the screen where it errored out.
    Thx
    PSR

Maybe you are looking for