Prevent the Output Message when creating PO from inbound IDOC

Hi SAP Gurus,
In my project, I have to create PO from inbound IDOC (PORDCR) with a specific Document Type ('099').
Requirement: These PO should not generate the output message while the others (Doc Type # '099') do.
I have the Z fuction module which call BAPI_PO_CREATE for posting IDOC and it works fine.
In the existing system, there are some set up that trigger the output message type for PO (output NEU) when using ME21 or ME22, as a result my PO created with output message.
Can you please advise if there are some way (User Exit?) that prevent the output message in this scenario (specific PO Type) without touching the current Condition setup?
I'm new in MM and really need help!
Thanks,
Elaine.

Hi Vinod,
I really appreciate your anwer. I'm going to explore this with my functional consultant.
Just like to have more questions:
1. Is it easier if we change the existing condition table instead of creating a new routine?
2. There are two forms for routine 101 (FORM KOBEV_101 and FORM KOBED_101). Can you explain to me why we need 2 here for what purpose of each form.
3. In the debug mode by using WE19 to post inbound IDOC, I change the SY-SUBRC = 4 and PO created without output message. Is it the right direction? Anything else I need to pay attention to?
Thanks again.
Regards,
Elaine.

Similar Messages

  • How to prevent the save message when program exit vi is used

    I am using the Quit LabVIEW vi and am getting the Save/Don't Save/Cancel dialog each time the operator quits the program.  The reason is objects on the screen have been resized.  The vi properties for window appearance are scroll bars off.  This is a base development package so the program runs in the environment.  I would like to allow the operator to exit without seeing this message.  LV 8.5, Win XP
    Thank you.
    Solved!
    Go to Solution.

    sfm,
    The best way to do this is by incorporating a source code control depository.  Set your LabVIEW.ini options to configure the source code control and to treat read only vi's as locked.  Edits will only be allowed if the code is checked out of source code control and that prevents the operator moving or resizing the FP objects accidentally.  You should not allow your operators to make code changes!  Operators operate, developers edit code.  It is common to have operators who are also developers BUT, the functions must be kept separated.  
    What I mean is that the user is either trying to make the code do what it needs to do (developing - so code changes are desirable.) OR the user is trying to use the code to do its intended function (operating - so code change is not just undesirable, it is BAD!)
    The pop-up is not just annoying, it indicates that code control does not exist! You need better logistics to prevent code maintenance headaches of biblical proportions.
    Jeff

  • Create shipment from inbound IDOC SHPMNT05 ?

    Hello All,
    I would like to create an individual shipment when i receive from a partner an inbound IDOC.
    I'm using Message type SHPMNT, Basic Type SHPMNT05, Process Code: SHPM and testing in WE19 via FM IDOC_INPUT_SHPMNT.
    How can I start the creation of the shipment with this inbound IDOC ?
    Is it possible ? or is it necessary  to develop in user-exit the code to create shipment with function module (which one ? BAPI_CREATE_SHIPMENT ?)? 
    Thanks a lot,
    My

    Hello Reddy
    thanks for your answer.
    is there particular customizing to be done ?
    i exactly use function BORES_IDOC_INPUT_SHPMNT
    The inbound idoc is generated but i have the following status message 51 "Application document not posted"
    What does it mean ? a problem of data in the inbound IDOC to create the shipment ?
    Thanks a lot
    MY

  • Error message when creating PDF from Indesign and Photoshop

    Hi, I reinstalled my Adobe CS2 product, and now get an error message each time I create a PDF from either InDesign or Photoshop. The message reads:
    The instruction at "0x0045c9e5" referenced memory at "0x0215ebdc". The memory could not be "read".
    I appreciate any help in resolving this issue.
    Thanks --Alex

    How do you create the PDF? There are multiple ways and it might make a difference.

  • Error Message when creating file from INDCS3 files

    Running, Windows XP, Creative Suite CS3,, Acrobat 8 Pro, and all updates. Unable to create a PDF using the "mulitple files" selection and selecting INDCS3 files on a server, receiving the following error:
    -----Invalid value for parameter 'using" of event 'exportFile'. Expected PDFExportrPreset, but received "standard". Files all open in InDesignCS3, but no PDF file is created. Able to create PDFs directly from IND without any problems.----
    Was able to handle this function in CS2 without any problems. Can you tell me where we are going wrong?
    KEN PANTHEN, Albany, NY

    does it happen with local indesign files, or just those on that (particular) network?

  • Prevent the next message from being automatically selected when deleting?

    The information on this page (Mail (Yosemite): Delete messages) doesn't work for me:
    "Tip: To prevent the next message from being automatically selected (and marked as read), hold down the Option key when you delete a message."
    The next message still opens up.
    Anyone know what to do here?

    Hi,
    not sure where to find original post. In RDB, it is MSP_EpmTask_UserView.TaskClientUniqueId.
    Sorry, if there are now 2 answers.
    Regards
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
    an appropriate solution faster. Thanks for your support!

  • Partner function copied from PO to Outb.del. but output message not created

    Hello Gurus,
    As the copy of the partner function from the PO to the Outbound Delivery is not supported in standard, I have activated userexit_save_document_prepare (MV50AFZ1) where I can add the other partner roles out of the purchase order into table XVBPA (VN). Thanks to this exit, the partner function VN is correctly added in the Outbound Delivery.
    My issue is the following this partner function should create an output message using the partner function VN but this one is not created during the Outbound delivery creation. But if I go to the VL02N and just save the Outbound delivery again (without change) now the output is correctly created and processed.
    Does someone of you know the reason why the output message for partner VN is not triggered at the Delivery Creation but
    after the manual save?
    Kind regards
    Chris

    I have just explained this in Copy partner from PO to inbound delivery

  • After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents.  Any ideas?

    after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents."  Any ideas?

    Are you restoring from a TM backup??
    Check the methods Pondini outlines to do restore.
    Q14-17
    http://pondini.org/TM/FAQ.html

  • HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

    I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
    "The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

    Try Perian.
    http://perian.org/

  • When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

    When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
    Any help with getting the TOC heading entries as hyperlinks?

    Try to do it from Word using the ribbon.

  • Help!  How do I download software for a HP Laserjet Professional P1100? I keep getting the same message when I have downloaded the file "Your security preferences allow installation of only apps from the Mac App Store and identified developers" Help!

    How do I download software for a HP Laserjet Professional P1100? I keep getting the same message when I have downloaded the file "Your security preferences allow installation of only apps from the Mac App Store and identified developers" Help!

    You can change the settings in Security & Privacy to "Anywhere"...
    That should work... as to whether the printer driver will work, that's another question.
    Good luck,
    Clinton

  • How to display the Output messages on LabVIEW

    Hi,
    I'm building a simple user interface on LabVIEW and I have the following question:
     - TestStand has an Output Tab where I display some messages using Engine.OutputMessage; How can I do the same thing on my UI?
    I've attached a printscreen of my TestStand sequence as an example of what I want do do on LabVIEW.
    I apreciate all the help.
    Thanks in advance.
    Regards,
    Daniel Coelho
    Daniel Coelho
    VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
    Controlar - Electronica Industrial e Sistemas, Lda
    Attachments:
    TS PrintScreen.JPG ‏137 KB

    Sorry, from your post in the LabVIEW board I did not understand that it was the Output message that you were looking for.
    I thought you wanted the results from your test steps displayed on the user interface. 
    It is the “Output Panel” in the sequence editor that displays your output message, but I do not know if there is default Output panel activeX indicator for user interface that the TestStand engine would update automatically like it does the execution view.
    Maybe someone else knows 
    As also pointed out, the UI messages is your other option.
    The Output Message event number is 40 
    http://zone.ni.com/devzone/cda/epd/p/id/3879
    UIMsg_OutputMessages–(Value: 40) TestStand sends this message at periodic intervals when it holds references to output messages that calls to the OutputMessage.Post method queue. TestStand transfers the queued messages to an OutputMessages collection attached to the UIMessage.ActiveXData property for this event. An application that processes output messages should copy the output message references from the collection in UIMessage.ActiveXData to its own private OutputMessages collection by passing its private collection to the OutputMessages.CopyMessagesToCollection method. An application calls the Engine.NewOutputMessages method to create a private OutputMessage collection. TestStand generates this event only if the Engine.OutputMessagesEnabled property is True. Because there can be more than one handler for this event, the application should not modify the OutputMessages collection the UIMessage.ActiveXData property holds.
    Omar
    Message Edited by OmarGator on 10-09-2008 10:12 AM

  • Error Message When Importing Bookmarks From A Network Share

    An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
    To replicate:
    The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
    If I copy bookmarks.html local to the kubuntu machine, it imports without error.
    On windows, I can import bookmarks.html from the network share without error.
    Does anyone know why I can't import across the network on the kubuntu version?
    browser being run on windows 7:
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
    browser being run on kubuntu 10.04:
    Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

    It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
    error message/window titled: remote files not accepted. The message states: You can only select local files.
    So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

  • "Macros in this project are disabled..." error message when creating PDF files

    The following error occurs when creating a PDF file using a document that was created from a MS Word 2007 templates.
    "Macros in this project are disabled..."
    The security settings are set appropriately - it's not that. I have done everything I can think of including asking Microsoft; they say it's not them. It may not be, but I do not know how to get around it. It did not happen before upgrading my templates to the Office 2007 format.
    Has this happened to anyone else? There is no coding within th etemplates regartding PDFs. We are using Adobe Professional X.  The error only occurs when we use Adobe Pro X.
    One thing I just noticed, our templates get the following message when we go to save as a PDF using Adobe:
    Acrobat PDFMAker needs to save the file before continuing. Do you want PDFMaker to save the file and continue?

    Does it work the first time after you delete your Normal.dotm file? You may be running into the same issue that is detailed in this post Unable to open document. Please check to see if you have read permission for the above file.

  • Why am I suddenly getting the following message when starting Firefox 7.0.1, "using registry key software appdatalow\". I am using Win7 Pro 64-bit.

    I had just installed a CAD package that required it to be run in compatibility mode (XP). I now get a window with the following message when starting Fierfox v7.0.1 according to the Help pull down menu and then About.

    http://www.symantec.com/security_response/writeup.jsp?docid=2010-011922-0125-99& tabid=2
    The story goes on. I am sharing this with other users for information only based on my experience with the product. I've owned a MAC since they were first introduced in 1984 and have used Norton for years. If the virus Bloodhound was real, and not just a false heuristic positive (which is totally possible) it came in on the heels of my downloading a free PDF OCR X (before reinstalling the updated version of Norton for 10.8.3) and using it to convert .jpgs > PDF OCR X text >MS Word > Adobe .pdf as that virus (Bloodhound.PDF.20 is known for exploiting weaknesses in Acrobat and Adobe .pdfs). I have never been happy having to use the MS Office suite of office products for MAC, but EXCEL on a PC is only compatibile with EXCEL on a MAC.
    When I got the Bloodhound warning after running a quick scan, I ran a full scan (1,050,660 files) with the same result. I looked at my terminal - nothing happening. I called Norton, who in turn convinced me to purchase an $89.98 subscription + $19.95/month for their spyware and virus removal service (the same sales pitch I've heard from other security providers who sell services through panic). The tech, who said it was probably false, played around with my computer via remote login, and then signed off, saying everything was okay. I reran a full scan and there was the virus again. Called tech support again. Finally got the virus quarantined and tossed it. The reality is that there was a 50/50 chance that it was something because of the way MS Word was behaving when I tried to save the file created from the ocr'd jpgs (error message: disk full- when I have 250GB of free disk space). I had to resave the files with a different name and place them in alternating folders. That havoc is now gone, but I will not be keeping the subscription. Just FYI.

Maybe you are looking for