Create RAC on Virtual Nodes

I have to create 2 node RAC db where the 2 nodes are vm's.
What is the process?
Can I get some references to it please.

user539083 wrote:
I uderstand that RAC on Vm's where VM's are on the same physical server is not supported?
Is that correct?No, we support RAC regardless of whether the nodes are on the same or different physical hosts. From Metalink ID 464754.1, here are the restrictions for running Real Application Clusters under Oracle VM:
    * Oracle 10.2.0.4 (10gR2) and 11.1.0.7 (11gR1)RAC for Linux x86 and Linux x86_64 certified on Oracle VM
          o Guest OS: OEL 5.1 (and above) RHEL 5.1 (and above) for Linux x86 / Linux x86_64
          o Paravirtualized (PV) mode only (Guest OS and drivers)
          o Only supported on Oracle VM 2.1.2 and above
          o Over-committing CPUs is not recommended, but supported with the following restrictions:
                + The total amount of VCPUs allocated to guest domains (running Oracle RAC guests), should not exceed two times (2x)
                    the amount of real CPUs / cores in the Oracle VM server.
                + The amount of VCPUs allocated to a single guest domain should not exceed the amount of real CPUs / cores in the Oracle VM server.
                + Maintain Oracle VM’s default VCPU allocation for dom-0: Oracle VM will allocate 1 VCPU for each real CPU or core to dom-0.
                + CPU pinning is only recommended for hard partitioning. If no hard partitioning is required, CPU pinning should not be used.
          o Static support only (dynamic support is being planned):
                + Dynamic resizing of guest virtual machine is not supported (VCPU, memory and I/O)
                + Live Migration is not supported
                + Virtual Machine Pause/Restore of an active Real Application Cluster virtual machine is not supported. Note that 11gR2 certification is still pending, but expected soon.

Similar Messages

Question about DBCA generate script o create RAC database 2 node cluster

Question about creating two node RAC database 11g after installing and configuration 11g clusterware. I've used DBCA to generate script to create a rac database. I've set
environment variable ORACLE_SID=RAC and the creating script creates instance of RAC1 and RAC2. My understanding is that each node will represent a node, however there should only be one database with a name of 'RAC'. Please advise

You are getting your terminology mixed up.
You only have one database. Take a look, there are one set of datafiles on shared storage.
You have 2 instances which are accessing one database.
Database name is RAC. Instance names are RAC1, RAC2, etc, etc.
Also, if you look at the listener configuration and if your tnsnames is setup properly then connecting to RAC will connect you to either one of the instances wheras connecting to RAC1 will connect you to that instance.

Creating DR standby from RAC to single NODE

OS and Database versions Primary:
node1:- OEL 5.7
node2:- OEL 5.7
inst1:- prod1 Oracle 11.2.0.3
inst2:- prod2 Oracle 11.2.0.3
Standby:
OEL 5.7
Oracle 11.2.0.3
NOTE:- Creating Standby on Single node.
My scenario:
============
node1:- linuxdb1
node2:- linuxdb2
inst1:- prod1
inst2:- prod2
Point1:- We have 2 node RAC with ASM disk and database is okay. Now i want to make DR on single node with ASM disk created already.
Point2:- grid and oracle users are on RAC prod database & also same grid and oracle users on SINGLE node DR
Point3:- Took RMAN backup from prod database ( 2 node RAC ) and copied to DR as shown below:
RMAN>backup device type disk format '/u02/stby/%U' database plus archivelog;
RMAN>backup device type disk format '/u02/stby/%U' current controlfile for standby;
scp -rp /u02/stby/* [email protected]:/u02/stby/
Point4:- Now when i run below command on DR ( oracle@linuxdr2 )
[oracle@linuxdr2 stby]$ rman target sys/pwd@prod1 auxiliary /
Recovery Manager: Release 11.2.0.3.0 - Production on Sun Mar 10 13:18:20 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD (DBID=220323208)
connected to auxiliary database: PROD (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 10-MAR-13
using target database control file instead of recovery catalog
configuration for DISK channel 2 is ignored
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=1142 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 10-MAR-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u02/stby/33o464m6_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/10/2013 13:19:22
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred
Can you please help me to resolve the issue.
Thanks,
Vikhar

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/10/2013 13:19:22
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred Any errors in alert log file?
Have you tried once again ?
Why cant you go for RMAN duplicate from active database, If you have any concerns then enable trace of RMAN and share the information
rman target / log=/u01/test/rman_log.txt trace=/u01/test/rmantrace.log

Manaul steps to create RAC ONE database

Hi I am trying to create to the RAC one database mnaually without using dbca utility.
Can anyone please let me know the steps to to create RAC one node database.
I am able to find lot of doucemtnation on net for the steps to create RAC database but unable to get on RAC ONE nodate database.

As John said, Setting up RAC one node is same as 2 nodes RAC . You need to define some parameters . Please follow the Oracle link and it explains very well.
https://docs.oracle.com/database/121/RILIN/racinstl.htm#RILIN1006

Creating a Master virtual hard disk and using the same for all other VM's

Hi,
We would like to create a master virtual hard disk and use the same for all other VM's. Can we do that ?
my requirements :
1) create 10 VM's
2) first create a master virtual hard disk with win OS and use the same to create the 10 VM's.
3) After creating the VM's change the HDD size.
              -- if i have created master virtual disk with 500GB , and use the same for creating a virtual machine. can we change the HDD size to 1TB ?
After creating the VM's ,i will change the system names and activate the windows accordingly.
Will there be any implications ,if we can/will do like this.
Thanks.

Hi Suren424,
I think Using Differencing Disks may cover your needs .
Please refer to following setps:
   "Create the Parent Virtual Machine Configuration and Virtual Hard Disk
    Install the Operating System, updates, and common software
    Generalize the installation
    Prepare the parent virtual hard disk
    Create the differencing disks
    Create virtual machines that use the differencing disks
For details please refer to follwing link:
http://social.technet.microsoft.com/wiki/contents/articles/1393.hyper-v-virtual-machine-vm-parent-child-configuration-using-differencing-disks.aspx
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to create one more server node for SAP J2EE server?

Hi,
Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
Thanks and Regards,
Smriti.

Hai,
Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
Thanks and Regards,

SMS_MP_CONTROL_MANAGER Failed to create the CCM_Incoming Virtual Directory

Hello -
I'm hoping someone could help me with this problem. I've searched so many websites trying to resolve this issue and it seems no matter what I try I keep getting the same error message.
I've followed the steps in setting up SCCM 07 from this web site which was very nicely done! I've also followed the directions on Microsofts Tech Net website on how to configure WebDav and IIS settings.
I'm working on a Virtual Windows Server 2008 32-bit OS, SP2, SCCM 07 SP2, IIS7
Here is the message I get in the log files:
Message ID: 4963
Process ID: 4364
Thread ID: 7996
Componet: SMS_MP_CONTROL_MANAGER
MP Control Manager detected MPsetup has failed to create the CCM_Incoming Virtual Directory.
Possible cause: The IIS IWAM account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IWAM account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The IIS IUSR account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IUSR account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
I could be completely wrong but I read somewhere that with the latest version of IIS doesn't install these user accounts. I checked to see if those accounts existed and they didn't.
I've tried what this one website mentioned:
http://myitforum.com...-directory.aspx
- Remove the MP role from the Site Server. Watch the MPSetup.log to ensure that the removal is complete.
- Uninstall the IIS component from the OS of the Site Server.
- Reboot the Site Server.
- Run ccmdelcert.exe from the SMS Toolkit.
- Reinstall the IIS component (with BITS) on the OS of the Site Server.
- Go into the IIS manager and allow WebDav.
- Add the MP role to the Site Server. Watch the MPSetup.log to ensure that the installation completes correctly.
These steps didn't seem to work, probably because it was for SMS 2003.
Here is the MPmsi log file:
<11-24-2009 17:39:28> SMSMP Setup Started....
<11-24-2009 17:39:28> Parameters: C:\PROGRA~1\MICROS~3\bin\i386\ROLESE~1.EXE /install /siteserver:DELGADO SMSMP
<11-24-2009 17:39:28> Installing Pre Reqs for SMSMP
<11-24-2009 17:39:28> ======== Installing Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:28> Found 1 Pre Reqs for Role SMSMP
<11-24-2009 17:39:28> Pre Req MSXML60 found.
<11-24-2009 17:39:28> No versions of MSXML60 are installed. Would install new MSXML60.
<11-24-2009 17:39:28> Enabling MSI logging. msxml6.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\msxml6MSI.log
<11-24-2009 17:39:28> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\00000409\msxml6.msi
<11-24-2009 17:39:30> msxml6.msi exited with return code: 0
<11-24-2009 17:39:30> msxml6.msi Installation was successful.
<11-24-2009 17:39:30> ======== Completed Installion of Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:30> Installing the SMSMP
<11-24-2009 17:39:30> Passed OS version check.
<11-24-2009 17:39:30> IIS Service is installed.
<11-24-2009 17:39:30> checking WebDAV configuraitons
<11-24-2009 17:39:30> WebDAV is configured
<11-24-2009 17:39:30> No versions of SMSMP are installed. Installing new SMSMP.
<11-24-2009 17:39:30> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<11-24-2009 17:39:30> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<11-24-2009 17:40:24> mp.msi exited with return code: 1603
<11-24-2009 17:40:24> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<11-24-2009 17:40:24> Fatal MSI Error - mp.msi could not be installed.
Component Services (DCOMCNFG) is running properly, no error messages when I was browsing around.
Any advice would be greatly appricated!
Thanks!

Just read the post below
http://social.technet.microsoft.com/Forums/en-AU/configmgrswdist/thread/5638cdf2-09d3-4750-995e-ae60973e86b8
<Remember to copy tasks from task scheduler to some different location because it gets wiped off in process)
Imp. Note: Running ccmclean /all on SCCM is one of these unsupported things.
Remove the MP as a site system role (if it is still installed), wait for it to finish
2.
Remove IIS completely
4.
Reboot
5.
Stop the Task Scheduler Service
6.
Rename the %windir%\Tasks folder to something else (or move it)
7.
Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
8.
Optional: Enable auditing on the \inetpub\wwwroot folder (and subfolders). Make sure to set local security policy to trap failures of file access. We will need this in case we see
the same security failure.
9.
Reinstall IIS, BITS, WebDAV
10.
Insure BITS and WebDAV are enabled
11.
Reinstall the MP
Server Engineer

Could not create shortcut Manage Virtual Networks.lnk during VM Server 2 install. Why?

I am trying to install VMware Server 2.0.2 on my HP Laptop running Windows 8 Pro as Host. But I am getting the following warning messages but the install continues to completion:
Warning Msg:
Warning 1909. Could not create shortcut Manage Virtual Networks.lnk. Verify that the destination folder exist and that you can access it.
Warning 1909. Could not create shortcut Server Home Page.lnk. Verify that the destination folder exist and that you can access it.
After installation, I am not able to login to the VM Server. When I click on the VMware Sever login icon, the error that I am getting states: okonita1:8333 -
Oops! Page Not Found
Sorry, the page you were looking for could not be found.
I am at a loss how to correct this error. I have googled, read and followed a lot of the online help that I can find including taking ownership of suspect target folders such as ProgramData, all to no avail.
At this point, I am hoping someone does know what specifically can help resolve my issue and I am asking for help. VMware knowledge base or support are not helpful.
Thanks all,
Enyi

Did you run the VMServer setup *as Administrator*?
Did you have IIS installed on your system before you installed VMServer?

Unable to create the bluetooth virtual COM port

Hi all
I install BS from Toshiba and it seems ok. Bt ir desn´t work. I see all the drivers installed, system devices, etc. No Toshiba BT ports can be seen. Local com ports only show modem port. Try to create a virtual port but get a message "unable to create a bluetooh virtual port" I have a satellite m100-145. Can anyone help on this ?
thx

Thx for your suport.
I decide to reinstall windows and all software. Now it works.
The error was due to the fact that if you have BS from Microsoft (called bluetooth monitor) and you install the BS from Toshiba after that, even if you remove the BS from MS, the BS from Tos is unable to create the virtual com ports (except modem).
I try with the latest version of BS and the problem was not solved. So if there is a previous installation of BS fom MS the BS from Tos get the message of "unable to create the bluetooth virtual com port".
Now i fixed reinstalling SO from beginning.

How to create a new virtual host under tomcat 4.1.x?

hi all
i need some help creating a new virtual host under tomcat 4.1.18!
that's what i do:
i'm using the web configuration, reacheable by typing "http://localhost:8080" and then clickign administration
i create a new host
name: www.class-site.it
application base: webapps\class-site
then i create the context:
document base: webapps\class-site
path: /
and nothing works!!!
anyone could help me?
if needed i can also post the server.xml file
thanx in advance for your help
sandro

It should look like this
<Host name="myvhost.com" debug="0" appbase="/my/path/to/webapps" unpackWars="true">
<Context path ="" docBase="ROOT" debug="0"/>
</Host>
This should be inside the <Engine> tags. You should be able to access a page by going to
http://myvhost.com:8080/index.jsp
Obviously you need index.jsp in /my/path/to/webapps/ROOT/index.jsp
Hope that helps

SecurityException when creating a root preference node on Vista

When creating a root preference node (Preferences.systemRoot()) on Vista, I always get a SecurityException. This happens even when running from an administrator account. Has anyone seen this behavior and/or found a workaround?
Basically, I want to store an application preference (a license key) that will hold for any user on the same machine running my Swing app. This rules out calling userNodeForPackage. I've also looked at using systemNodeForPackage, but the javadocs say "This node is not intended for long term use, but for convenience in the early development of programs that do not yet belong to a package, and for "throwaway" programs. Valuable data should not be stored at this node as it is shared by all programs that use it."

Hello, Lars,
My guess is: as it's a 0..N node, when you dinamically add the node, it's not been initialized, as the parent node is empty (no elements). So, when you try to get its reference, it doesn't exist yet. That's why when you set the cardinality of the node to 1..N (or 1..1) it doesn't generate the error, as the WD4A framework initializes the parent node with at least one element, that can have a child node.
What happens if you initialize your node before trying to get a reference to it? For exemple, a bind_table (or bind_element) call before:
o_attr_context_node = o_context_node->get_child_node( name = '_ATTR' ).
Regards,
Andre

CCMS and virtual nodes

Can I set a Autoreaction Method in a virtual node?
I am getting a message:
"No properties can be maintained for the selected nodes(MTE)" when trying to display to methods associated to this node.
Thxs!

Hi,
I am not sure but CCMS configuration including custom node creation as well as autoreaction method explained in XI monitoring guide, which you can get from service market place and from How-to section also.
I hope it will help you with your configuration.
Regards,
Gourav

Could not create the Java virtual machine What happen?

all,good day!
i use tomcat7 and JRockit JVM;
tomcat7 version info:
Server version: Apache Tomcat/7.0.27
Server built: Mar 31 2012 03:43:36
Server number: 7.0.27.0
OS Name: Linux
OS Version: 2.6.32-220.el6.x86_64
Architecture: amd64
JVM Version: 1.6.0_02-b05
JVM Vendor: BEA Systems, Inc.
JRockit JVM version info:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-linux-x86_64, compiled mode)
in R28 jrdoc ,The -XgcPrio option is deprecated in Oracle JRockit R28. The option works in R28, but Oracle recommends that you use -Xgc instead. For more information, see -Xgc;
in -Xgc option info lists the garbage collection modes that i can specify with the -Xgc option. pausetime mode in which the option；
but，but，i use -Xgc:pausetime in my tomcat7;tomcat startup error:
The configuration of the JVM attributes in Tomcat in catalina.sh
export JAVA_OPTS="-server -Xms25G -Xmx25G -XgcPrio:pausetime -XpauseTarget=200"
the error info:
[ERROR] Argument error: -Xgc:pausetime
[ERROR] pausetime is not a valid garbage collector name for -Xgc.
Valid options are: singlecon, gencon, genpar or parallel (singlepar).
[WARN ] No unit entered for pause time target, assuming ms.
Could not create the Java virtual machine.
what's wrong in my configuration ?
Edited by: 944618 on 2012-7-5 上午4:26

I would add the jvm flag -showversion next to the -Xgc:pausetime flag, so you will see which JVM you're actually running.
Also, the following part of your post is a bit inconsistent, which jvm flag are you actally using?
"but，but，i use -Xgc:pausetime in my tomcat7;tomcat startup error:
The configuration of the JVM attributes in Tomcat in catalina.sh
export JAVA_OPTS="-server -Xms25G -Xmx25G -XgcPrio:pausetime -XpauseTarget=200"
the error info:
[ERROR] Argument error: -Xgc:pausetime"
The error output you posted looks like the error you would get from a R27 version of JRockit.

Create new / add Custom Node in Component Pallete - Workflow Editor

is there anyway to Create new / add Custom Node in Component Pallete - Workflow Editor in SQL Developer - Oracle Data Miner?
Now i'm in progress create data cleansing engine in database package, and I have an idea to create new node in workflow editor, the node will call my procedure data cleansing.
Anybody help?

Hi,
Not currently.
We are working on a SQL Query node that would process data on connected input nodes and allow the user to create any sql query specification they would like.
So as long as your implementation is compatible with being included as part of a sql query, then you may be able to take advantage of this new node.
Since you describe your implementation as a data cleansing implementation, I could see it taking in what ever input is provided in the flow, and then returning a cleansed result set.
Thanks, Mark

Weblogic 9.2 server not starting up : Could not create the Java virtual mac

Hi
I have created Weblogic domain.
Now I am trying to bring my server up by using the startWeblogic.cmd present in domain\bin.
I get the following error -
java version "1.5.0_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
Java HotSpot(TM) Client VM (build 1.5.0_12-b04, mixed mode)
Unrecognized option: -
Could not create the Java virtual machine.
The output when i run the start script is as follows -
JAVA Memory arguments: -Xms1024m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=256m
WLS Start Mode=Development
CLASSPATH=S:local;;D:\bea\patch_weblogic923\profiles\default\sys_manifest_classpath\weblogic_patch.jar;P:\JDK150~1\lib\tools.jar;D:\bea\WEBLOG~1\server\lib\weblogic_sp.jar;D:\bea\WEBLOG~1\server\lib\weblogic.jar;D:\bea\WEBLOG~1\server\lib\webservices.jar;;D:\bea\WEBLOG~1\common\eval\pointbase\lib\pbclient51.jar;D:\bea\WEBLOG~1\server\lib\xqrl.jar;;Q:\VODAFO~1\lib\WSDLProxy.jar;
PATH=D:\bea\patch_weblogic923\profiles\default\native;D:\bea\WEBLOG~1\server\native\win\32;D:\bea\WEBLOG~1\server\bin;P:\JDK150~1\jre\bin;P:\JDK150~1\bin;D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\Program Files\TortoiseSVN\bin;D:\ProgramFiles\Rational\common;C:\Program Files\CVSNT\;D:\bea\WEBLOG~1\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Starting WLS with line:
P:\JDK150~1\bin\java -client -Xms1024m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=256m -Xverify:none -da -Dplatform.home=D:\bea\WEBLOG~1 -Dwls.home=D:\bea\WEBLOG~1\server -Dwli.home=D:\bea\WEBLOG~1\integration -Dweblogic.management.discover=true -Dweblogic.http.descriptor.merge=true -Dejbruntime.database=pointbase44 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\bea\patch_weblogic923\profiles\default\sysext_manifest_classpath -Djava.protocol.handler.pkgs=com.vodafone.vgsg.wsdlproxy -Dcom.vodafone.vgsg.wsdlproxy.protocol=http -Dcom.vodafone.vgsg.wsdlproxy.host=localhost -Dcom.vodafone.vgsg.wsdlproxy.port=7001 -Dweblogic.Name=portalServer -Djava.security.policy=D:\bea\WEBLOG~1\server\lib\weblogic.policy - weblogic.Server
I checked all configurations. All seem fine but I am surely missing something.
I recreated the domain thinking I messed up something but that did not help.
I tried using jrockit instead of sun jdk. It still could not create JVM.
I really appreciate any help!
Regards,
Smita

Extra dash in the java start line ( before the weblogic.Server ):
-Dweblogic.Name=portalServer -Djava.security.policy=D:\bea\WEBLOG~1\server\lib\weblogic.policy - weblogic.Server
might be why you get the message:
Unrecognized option: -
I can get the same error with this example:
/bin> java -
Unrecognized option: -
Could not create the Java virtual machine.

Create RAC on Virtual Nodes

Similar Messages

Maybe you are looking for