Create same asset error
I have one old asset 4230001 in company code 6700, capitalization date: 25.10.2009, first acquisition date:31.12.2009. APC value 3000, NBV: 1000
I try to duplicate asset 42300001in company code 5300, thus I create asset 42300009 with same capitalization date 25.10.2009.
but when I enter ABNAN, I have difficulty in choosing correct posting date, amount posted and original val date
even if I choose 31.12.2009 as original val date, the new asset 42300009 's first acquisition date still be 25.10.2009.
also I can only choose cost element as offsetting account, can i enter balance sheet account for ABNAN?
any one know how to fix?
do i need to design a new transaction type for ABNAN?
Hi
Inter company Asset transfer - ABT1N
Go to Inter company transfer TAB
select indicatior Existing Asset and Company code
Give Document Date
Posting Date
Asst value date----
Asset Aquistion date
click on Simulate
Notice the both the company codes and Asset under each company codes.
Save
Thanks
P J Anil Kumar
Similar Messages
-
While I have create group asset error occured Assert condition is voilated?
Hi All,
while I have create group asset error occured Assert condition is voilated . Its runtime error .
please can you send screen shot screen layout of group asset in asset master data?
Thanks
Shailesh.
9604645129.Hi
what is the message number/ Dump ananlysis (check it in ST22) ?
VVR -
Hello,
I am getting an error while creating empty assets. The same code was running well yesterday but not today. I have not made any changes anywhere. I just shut down my system yesterday and start today. Please let me know what's wrong...
Here is the code :
//Create the empty asset for the upload file
private string CreateEmptyAsset(string fileName)
var sasLocator = string.Empty;
try
// Assets.Create creates the asset and uploads the specified file.
_context = new CloudMediaContext(_accountName, _accountKey);
IAsset _theAsset = _context.Assets.CreateEmptyAsset(fileName, AssetCreationOptions.None);
this._theAsset = _theAsset;
sasLocator = GetAssetSasUrl(_theAsset, TimeSpan.FromMinutes(60));
catch (Exception exception)
MessageBox.Show("Unable to create empty asset.\n" + exception.Message,
Resources.frmUpload_BtnAddFileClick_Upload_Footage, MessageBoxButtons.OK,
MessageBoxIcon.Warning);
return sasLocator;
Awaiting fast reply.. It's a critical time here.
Thanks
DevHello All,
My problem is solved now. I create the asset using :
var
asset
=
mediaContext.Assets.Create(assetName,
assetCreationOptions);
and to commit/publish
it I write :
//Publish the asset
try
_theAsset.Update();
var assetFiles = _theAsset.AssetFiles;
foreach (var _file in assetFiles)
_file.IsPrimary = true;
_file.ContentFileSize = fileInfo.Length;
_file.Update();
catch (Exception e)
This solved my partial upload too. At the time of partial upload I am not creating asset just publishing it.
Thank you very much for your great support. Keep it up. :)
Thanks again
Dev -
Error while creating the ASSET using LSMW BAPI method ( BUS1022 )
Hello,
Im creating assets using the below LSMW BAPI method
Business Object BUS1022
Method CREATEINCLVALUES
Message Type FIXEDASSET_CREATEINCLVALU
Basic Type FIXEDASSET_CREATEINCLVALU
the following errors were triggered while populating the values to ACQ_VALUE and ORD_DEP value.
Correction to ordinary dep. greater than acc. dep. in area 01
Correction to ordinary dep. greater than acc. dep. in area 30
Correction to ordinary dep. greater than acc. dep. in area 31
Correction to ordinary dep. greater than acc. dep. in area 32
if i pass only ACQ_VALUE, I am able to create the asset with out any issues.
Can you guys plz guide me to fix this issue to create the asset with both ACQ_VALUE and ORD_DEP values??
Cheers,
Sriram.Hello,
Review AO21.
Regards
Waza -
Error while creating Group Asset
Dear All
While Creating Group Asset I am getting the Following error:
No depreciation area in company code 1000 allows group assets.
Message no. AY160
Diagnosis
You cannot create group assets in company code 1000. There are no depreciation areas that can manage group assets in this company code.
Procedure
Make sure that you really want to create a group asset in company code 1000.
If so, then allow group assets in the desired depreciation areas.
Please advice.
Thanks & Regards
KanwaljitHi,
Check the config in OAYM and OAAX.
Then your issue will get solved.
Thanks,
Srinu -
Error while creating Legacy Asset using AS91
Error is as follows
E698 SYST: Abnormal termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR
In 2008 during implementation, there was a mis match between FI & AA.
In AA Takeover values were not updated but GL entry was made. Now since depreciation is run, it is not allowing to update takeover values in AS92.
Now the i have planned to follow this procedure
Firstly Reset Depreciation
Then to create new Assets in AA copying previous assets without Takeover values using AS 91 & update those takeover values in new assets.
Then FI & AA values would match & then i can run depreciation.
But in 2nd step i am stucked, as when i try creating new asset using AS91 it is giving above error.
What should be date of legacy data transfer in spro? i have maintained 30.09.2008
In OAAQ i have maintained closed FY =2007
In OB52 i have Opened both 2008 & 2009 posting periods.
What more has to be done?Hi Paul
I have taken a production copy in different client & have done all these with the client's permission.
Following are the reasons with example
suppose these are 4 assets at the time of implementation
1 Asset A Acquisition value 100000/- Accumulated Depreciation 20000/-
2 Asset B Acquisition value 200000/- Accumulated Depreciation 30000/-
3 Asset C Acquisition value 300000/- Accumulated Depreciation 40000/-
4 Asset D Acquisition value 400000/- Accumulated Depreciation 50000/-
In implementation following happened by mistakenly
Asset A & B were properly created using AS91 & in GL also entry properly made using OASV
but for Asset C, entry was made using OASV but in AA Tcode AS91 Asset Master was created but Takeover values were not updated.
for Asset D entry was made in OASV but in AA Asset number was not at all created.
so when you see asset master C in AW01N acquisition value is blank & planned depreciation is also missing.
i think individually all data was not cross tallyied.
So the Balance sheet is tallyied with entry in FI
but
in AA there are 100 assets without takeover values & 300 assets for which Asset Masters are not at all created in AA.
& depreciation for 2008 has been run on other assets excluding these 400 assets.
So now AA closing cannot be done as the FI & AA balances are not reconciled.
& now we have to update takeover values creating new asset masters using AS91 but system is not allowing us.
Could you suggest some solution for these problems
Thanks in Advance -
Hi All,
My client uses an year dependent fiscal yr variant. I have maintained values for period 2008 and 2009. And generated period controls for the Yr 2009. When I try to create an asset the following error occures
SYST: Error when caclulating fiscal period --> F1
Message no. AA655
Diagnosis
An error occurred while determining the fiscal period 00000000 in period version P1.
Procedure
There are three things which could lead to this error:
1. The period version P1 allocated to the company code has not been created. In this case, you should create the period version.
2. The period version has been created, however the allocation of calendar dates to the fiscal periods has not been correctly performed or in particular with calendar-dependent period versions has not been completely performed. Check whether the date entered 00000000 for period version P1 has been maintained and enter the missing period.
3. The calendar date 00000000 is invalid. This is a system error. Contact your Systems Specialist.
Pls give me a reason and a solution to this.
Thanks & regards ,
MaleeqMaleeg,
Please make sure that you are using only one fiscal variant.
It seems to me that your client has two dependent year fiscal variants: One for Accounting 'F1' and one for Fixed Assets P1, but you are only maintaing the accounting one F1. Check that you also have maintained the fiscal varsion P1.
I think that is your problem.
Hope this helps.
Regards,
GG -
Error whle creating Main Asset Master(AS01)
Hi,
while i was trying to create the asset master , <b>ABAP run time error</b> is displayed <b>"snap_no_new_entry"</b> and i could not able to save the asset master.
please provide some solution for this problem.......
i am working on SAP 6.0 version.1st check tcode as08
A. -
Upload image failed when create image asset
I am using JSK, run on Tomcat, each time when I try to create Image Asset, and upload a image file, I will get "Upload failed" error, and there is not much information for me to debug the exception, anyone saw the same error? Thanks
I happen to spot the root cause of the problem today by simply changing the Web Browser, my previous Firefox is too old, if using Firefox version 22, upload file will be fine
-Liang Yi -
Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic. -
After upgrade to CF9, CFIMAGE "Unable to create temporary file" error
We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc -
When trying to create a new server farm in the sharepoint foundation 2013 we get a following error :
The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered.
PS C:\Users\Administrator> New-SPConfigurationDatabase
cmdlet New-SPConfigurationDatabase at command pipeline position 1
Supply values for the following parameters:
DatabaseName: SharePoint_Config
DatabaseServer: PC78\SQLEXPRESS,25111
FarmCredentials
Passphrase: *********
New-SPConfigurationDatabase : One or more types failed to load. Please refer
to the upgrade log for more details.
At line:1 char:1
+ New-SPConfigurationDatabase
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase:
SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPUpgra
deException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon
figurationDatabase
And the error log is shown below :
Microsoft.SharePoint.Upgrade.SPUpgradeException: One or more types failed to load.
Please refer to the upgrade log for more details.
at Microsoft.SharePoint.Upgrade.SPActionSequence.LoadUpgradeActions()
at Microsoft.SharePoint.Upgrade.SPActionSequence.get_ActionsInternal()
at Microsoft.SharePoint.Upgrade.SPUtility.GetLatestTargetSchemaVersionByMajorVersion(Type typeActionSequence, Int32 majorVer)
at Microsoft.SharePoint.Upgrade.SPUtility.get_CurrentSPSiteWssTargetSchemaVersion()
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, Strin... b712a522-fa85-49eb-b59c-dedf55295504
...g secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName, Boolean overrideCompatibilityRestriction)
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, Boolean useHostHeaderAsSiteName)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, ... b712a522-fa85-49eb-b59c-dedf55295504
...String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuil... b712a522-fa85-49eb-b59c-dedf55295504
...der configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase.InternalProcessRecord()
at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() b712a522-fa85-49eb-b59c-dedf55295504
Error Category: InvalidData Target Object Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase Details NULL RecommendedAction NULL b712a522-fa85-49eb-b59c-dedf55295504
Leaving ProcessRecord Method of New-SPConfigurationDatabase. e9ae5ba6-c499-0000-d35c-aee999c4cf01
we are using server 2012 R2 and we don't have office 2010 installedYes,SQL server is on the same server as SharePoint
SQL has both the permissions Securityadmin
and DBcreator roles on SQL Server.
When we run those sharepoint management shell commands the database will be created with the error
msg (shown in attachment) -
How to creat a numerical error propagation program
trying to create a numerical error propagation program
The response 'we have your suggestion on file' is typical. Let's look at the history, although it may be brief here. I suggested this almost a year ago. Others in this thread, although they may have a different purpose, asked about this capability 5 years ago.
At the same time, LabVIEW adopts 'upgrades' every six months that, from my perspective, seem more as a mechanism to force users to the new products. Many of the upgrades take LabVIEW in new directions and can be interesting at a more advanced level, but in the instruction of undergraduate engineering students, this has little purpose. I don't want upgrades that cause me to change the LabVIEW lesson plans I have developed even though the changes are mostly superficial things like labels and where objects are located on menus. A frustrating thing is that lab manuals are developed and printed (on paper) ahead of a course with directions for the 'old' version and then an upgrade happens that might create differences in the software, making the lab manual's directions 'wrong.' With constant hardware, what we do in the laboratory does not change much and the software has to do a basic job of consistenty supporting the DAQ hardware's functions. If the changes in LabVIEW versions become too great, our curriculum will switch over completely to MATLAB and use a fixed basis of hardware drivers. In MATLAB, with its matrix formats, the error analysis is relatively easy to do and the plotting capabilities are superior.
The paradox for me is that I want upgrades, but upgrades that add capability to the LabVIEW without changing the functions that already work. One of the desired upgrades is a new datatype for error analysis using duals, with a new wire color to respect the processing mathematics and provide support for error analysis. Here I mean error as component of 'uncertainty' and 'error analysis' including the two main topics of 'error sources' and 'error propagation'. These are important subjects in the undergraduate engineering curriculum and many research publications require the reporting of uncertainty. Upgrading from v7 to v8.2, we saw that the 'LabVIEW people' thought it important enough to make the error datatype (execution errors) its own wire color and datatype as a distinct cluster (this 'dark yellow' appears as more an olive color) to replace the error stream's pink color of mixed datatype clusters. From a user's perspective, error analysis of the measurement is important and should have its own datatype and wire color too.
Yes, there are ways in LabVIEW 8.2. (and probably later versions) to develop a new wire color and datatype but there is significant overhead using projects and classes. The questions for me, as an instructor of lab courses, are how much of this needs to be taught to the students and will the learning of LabVIEW to perform DAQ become too complicated if projects and classes must be understood? Digging down into the VI, sub-VI and function hierarchy levels, there has to be a balance struck between 'need-to-know' and 'don't go there'. The projects and classes go up in level, placing VI's in a larger structure but we still must ask if this is 'need-to-know.' If LabVIEW pursues this proposal of a new datatype and wire color for duals, this error analysis method would be placed on the current level of LabVIEW and we would not need to address different levels or ask if it is 'need-to-know.' It becomes more functional and serves the user in providing simultaneous error calculations and a basis for uncertainty reporting. -
I'm getting this error code in Final Cut Pro. The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it? This code comes up when exporting.
Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1. I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.
-
ABAP Dump while creating Group Asset
Hi all
I am getting the following dump while creating Group Asset through AS21-
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Except. CX_SY_REF_IS_INITIAL
Date and Time 19.11.2007 21:16:06
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLGLO_FIAA_SCREENS" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in procedure "SET_MANAGER_FOR_UPDATE" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "GO_ASSET_MAINDATA").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Source Code Extract
Line SourceCde
545 * -->P_LS_WORK text
546 * <--P_LO_ASSET_MANAGER text
547 * <--P_LO_TIMEDPNDNT_MANGER text
548 *----
549 FORM set_manager_for_update
550 USING
551 is_work TYPE raist03
552 CHANGING
553 co_asset_manager LIKE go_asset_manager
554 co_timedpndt_manger LIKE go_timedpndt_manager
555 ct_err_msg TYPE tt_err_msg.
556
557 DATA:
558 ls_asset_maindata TYPE gty_s_asset_maindata,
559 ls_anla_key TYPE anla_key,
560 ls_err_msg LIKE LINE OF ct_err_msg.
561
562 * check operation
563 IF is_work-kz EQ con_ins AND
564 is_work-flg_unr NE on.
565
566 MOVE-CORRESPONDING is_work TO ls_anla_key.
567 ls_anla_key-mandt = sy-mandt.
568 ls_anla_key-anln1 = is_work-anln1_new.
569 * start of Note # 954513
570 IF ls_anla_key-anln1 IS INITIAL.
571 ls_anla_key-anln1 = is_work-anln1.
572 ENDIF.
573 * end of Note # 954513
>>>>> ls_asset_maindata = go_asset_maindata->get( ).
576
577 * clone time-independent asset data manager
578 TRY.
579 co_asset_manager = lcl_amd_mngr_clone_factory=>clone_asset_manager( ls_anla_key ).
580
581 CATCH cx_faa_asset.
Any1 has a clue where I might be going wrong?
Cheers
HrishiHello Hrishi
I have researched your issue and note 1063792 should resolve it. The
SAP_APPL that it is included in is SAPKH60011. I recommend you to upgrade to the latest support package available to avoid eventual errors.
For program errors you should open a support ticket in the SAP Service Market place.
Regards
Javier
Maybe you are looking for
-
Null Error in Displaying a value through view attribute
I just want to display a value through message styled text bean from view attribute . For that i use the code in PR: But it gives null error: Please any one help me. public void processRequest(OAPageContext pageContext, OAWebBean webBean) super.proce
-
Insert values to one table based on a value inserted into another table
Hi, I've got a form based off a report which creates a new project. I've added an additional process to this form to insert four new values into another table as soon as the new project is created and the PK for that project is generated. This was wo
-
ICal Alarm - Pass Event data to AppleScript?
Is there a way that a script called by an iCal alarm can be passed event data as parameters?
-
How to stop a new window from taking focus
Hello, I have an application that brings up alerts when an event occurs. The alerts are actually toasts (similar to msn messenger alerts when someone comes online). My problem is that if I am working on another application, for example notepad, when
-
Encore 2.0 doesn't play audio from .mpg file
A long (1,5 hour) file transcoded from APPro 2.0 with media encoder. Encore 2.0 takes about 20 min to import that file as asset, and then - no audio playing in preview! I thought it was transcoding, or smth. and waited for an hour - still no audio! N