Upload image failed when create image asset

I am using JSK, run on Tomcat, each time when I try to create Image Asset, and upload a image file, I will get "Upload failed" error, and there is not much information for me to debug the exception, anyone saw the same error? Thanks

I happen to spot the root cause of the problem today by simply changing the Web Browser, my previous Firefox is too old, if using Firefox version 22, upload file will be fine
-Liang Yi

Similar Messages

Install OBIEE Failed When Creating Domain

Hi all,
I tried to install OBIEE on 64bit redhat linux, but failed when creating domain, the error log shows:
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An internal WLST operation has failed.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3126)
     ... 19 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 14 more
the following steps(steps after creating domain) raised:
Caused by: java.net.ConnectException: t3://hostname:7001: Destination unreachable; nested exception is:
    java.net.ConnectException: Connection refused; No available router to destination
It's unlikely a hosts file issue which I've met before.
Install OBIEE Failed on Linux 64bit
the log caused by hosts file shows:
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
BTW, the port was tested to be available.
any idea?
thanks in advance
Nathaniel

we had this issue couple of days back ,,
Resolved by doing below
1. uninstall obiee 2. drop the repository 3, remount /tmp folder
with this we could successfully install obiee 11.1.1.7

Unable to upload txt file when creating new message

Hi Expert,
We installed SolMan 7.1, but we are not able to upload txt file when
create a new message, detailed steps as below:
1. Click on “New
Message” under “Common Tasks” in the left side
2. Click on
“Attachment” under “Create Message”
3. Click on “Add”
under “Attachment”
4. Select file and
click on “OK”
5. But as the result, it says “No attachments. Select Add to
upload a new attachment.”
Could you please help advise the reason and solution?
BR
Takashi

Hi Vikram,
Thanks for your reply.
I have tried again and found that, it seems if the file size is 0, it can't be uploaed; if the size if bigger than 0, then it can be uploaded.
So I close this discussion now. Thank you!
BR
Takashi

Error when creating an asset

Hi All,
My client uses an year dependent fiscal yr variant. I have maintained values for period 2008 and 2009. And generated period controls for the Yr 2009. When I try to create an asset the following error occures
SYST: Error when caclulating fiscal period --> F1
Message no. AA655
Diagnosis
An error occurred while determining the fiscal period 00000000 in period version P1.
Procedure
There are three things which could lead to this error:
1. The period version P1 allocated to the company code has not been created. In this case, you should create the period version.
2. The period version has been created, however the allocation of calendar dates to the fiscal periods has not been correctly performed or in particular with calendar-dependent period versions has not been completely performed. Check whether the date entered 00000000 for period version P1 has been maintained and enter the missing period.
3. The calendar date 00000000 is invalid. This is a system error. Contact your Systems Specialist.
Pls give me a reason and a solution to this.
Thanks & regards ,
Maleeq

Maleeg,
Please make sure that you are using only one fiscal variant.
It seems to me that your client has two dependent year fiscal variants: One for Accounting 'F1' and one for Fixed Assets P1, but you are only maintaing the accounting one F1. Check that you also have maintained the fiscal varsion P1.
I think that is your problem.
Hope this helps.
Regards,
GG

List data validation failed when creating a new list item but does not fail when editing an existing item

Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark Kamoski

Dear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski

Trace activated when creating the asset master in AS01

Hi all,
I created a substitution rule saying that if company code is 1000 and depreciation area is 01 and cost center is 1000 and transaction code is AS01 the useful life should default to 01 . I maintained this substitution rule in GGB1 and assigned this to company code 1000 in OACS .
But when creating asset in AS01 iam getting a screen with trace and it is showing whether substitution is True or false and when trying to go back it is not accepting.
Can any one explain why could this screen trace come in AS01 and if any settings should be done please inform .

Go to your Substitution at GGB1 and deactivate trace at menu Extras-deactivate total trace

Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanks

Hi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes

System Image Utility 10.6.3 - fails when creating NetBoot image from DVD

System Image Utility 10.6.3, trying to create a NetBoot image from a bundled installer disc that came with a 27" Late 2009 iMac (iMac11,1). Image creation fails consistently, since the image that System Image Utility creates is only 901M.
Anyone see this before?
Don
--------- System Image Utility log ----------
Workflow Started (2010-06-16 14:03:02 -0700)
Starting action: Define Image Source
Finished running action: Define Image Source
Starting action: Create Image
Starting image creation process...
Create NetBoot Image
Initiating NetBoot from Install Media.
Creating working path at /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD
Creating disk image (Size: 901 MB)
Finalizing disk image.
created: /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD/NetBoot.dmg
Attaching disk image
Installing to destination volume
2010-06-16 14:03:38.126 installer[2365:6f03] Looking for system packages
2010-06-16 14:03:38.129 installer[2365:6f03] no system packages found
2010-06-16 14:03:38.130 installer[2365:6f03] No or Invalid system receipts found on /private/tmp/mnt.LjFArn
2010-06-16 14:03:38.130 installer[2365:6f03] Attempting fallback using: /System/Library/PrivateFrameworks/SystemMigration.framework/Resources/FallbackS ystemFiles.plist
2010-06-16 14:03:38.175 installer[2365:6f03] Finding system files...
2010-06-16 14:03:38.619 installer[2365:6f03] Writing system path cache.
2010-06-16 14:03:38.623 installer[2365:6f03] Error writing cache to /private/tmp/mnt.LjFArn/Library/Caches/com.apple.FindSystemFiles.plist
2010-06-16 14:03:38.625 installer[2365:6f03] Failed to enumerate /tmp/mnt.LjFArn/Library/Caches, cannot prune (
"com.apple.userpictureCache"
installer: Package name is Mac OS X
installer: Installing at base path /private/tmp/mnt.LjFArn
installer: The install failed (There is not enough space on this disk to install the selected items. Deselect at least 6.46 GB and try again.)
Script is done.
NetBoot creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.

Brian Nesse wrote:
Hi Don, here's my guess...
The 901 number is additional space added in the scripts. This indicates that the source image size was 0.
Since you are making a NetBoot from Install media, under the covers the installer process is being run to create a NetBoot volume. The media shipped with the 27" iMac is most likely CPU specific and thus the installation fails because you are trying to create the image (i.e. install the system) on an unsupported CPU.
In order to produce a NetBoot from the install media, you'll have to create it on the 27" iMac.
Hi Brian,
Thanks for the response. This makes perfect sense. I'll give this a try and shout back!
Thanks,
Don

Bug in Tabular form Not Exist Validation, fails when creating multiple rows

Hi,
I have a Not Exist validation created for a Tabular form:
select 1 from my_table where col1 = :col1 and col2 = :col2Execution State: For created and Modified Rows
which is working fine when a row already there in DB
and I am trying to enter a new row with same data.
but when there's no data and I enter two rows with same data, validation does not fire, first row should allowed to enter
but for second row it should give error that data already exists, which is not happening.
for example,
let's say I have a row in DB with: 1, 2, 3
when I try to add a new row with same data ie. 1, 2, 3 validation fires and showing error, which is fine.
but let's say there's no data in DB and I am entering two rows with:
1, 2, 3
1, 2, 3
validation is not working this time, it is allowing to enter both the rows.
do I need to create a manual validation for this or what?
Apex 4.1.1.00.23
Regards,
Tauceef
Edited by: Tauceef on Dec 6, 2012 10:09 AM
Edited by: Tauceef on Dec 6, 2012 11:22 AM
Edited by: Tauceef on Dec 6, 2012 11:27 AM

Hello Tauceef,
>> Now I got it, I was under impression that it will validate one by one row before insertion,
>> but it's going to check all the rows first, then do the insertion.
Just to clear things up, the APEX engine works exactly as you describe, but this is your problem.
The APEX engine do check\validate all the rows first, one row at a time, and only if all the rows pass validation, the DML processes kick in. The DML processes work on the entire Tabular Form record set (per page view, of course).
In order for your type of validation to work (the one that queries the database), as you want it, the validation and DML actions have to run together, row by row. This is not how things work, because it’s less efficient/optimal, and may lead to a situation where a certain row can fail validation, but other row(s) already been inserted/updated/deleted into/from the database. This could be a very tricky situation.
Vikram has suggested to rely on a database constraint, and control the APEX error message. This is possible, although I’m not sure that in this case, the Tabular Form will retain all the user changes, in case of validation error. You should check it.
Another option, which Marc hinted on, is to manipulate the G_Fxx arrays. In your case, you should loop through the new rows, compute their MD5, and make sure that all the rows have different MD5 values. This is on top of the current validation, which makes sure that the new rows do not already exist in the database.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

War file created in Eclipse works, but fails when created by Ant

Hi,
I am having trouble getting my flex war file to work when I create it using Ant, even though the same war works fine when I create it from my Eclipse Export War function. This is a critical problem and any ideas or suggestions would be greatly appreciated.
I have a working installation of LCDS running under JBoss 4.0.5 (in a CENTOS (Red Hat) environment). I have implemented a datatier in Java to interact with my PostgreSQL 8.x database. The Java code, plus the necessary flex jars and xml files and some mxml test programs, are all in an Eclipse J2EE project that I created from the flex samples.war file. It all works fine when I use Eclipse to create a WAR from the project and deploy it in JBoss. My problem is this: When I create a WAR piece by piece using Ant, then deploy it to JBoss, that WAR does not work. The error I get is this:
javax.servlet.ServletException: Invalid Configuration: see previous failures. flex.webtier.util.ServiceUtil.setupFlexService(ServiceUtil.java:55) flex.webtier.server.j2ee.MxmlServlet.init(MxmlServlet.java:57), etc.
When I look at the log I see this problem:
"You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.",
but that error is in the server log even when I use the good WAR file.
I have compared the two wars but cannot find any substantial difference between them.
Thanks in advance!

Have you tried enabling debug level logging and removing the category filters in services-config.xml? It should show all the destinations being created, and if any are failing. To get the maximum level of log detail, something like this should work:
><logging>
>
> <target class="flex.messaging.log.ConsoleTarget" level="Debug">
>
> <properties>
>
> <prefix>[Flex] </prefix>
>
> <includeDate>false</includeDate>
>
> <includeTime>false</includeTime>
>
> <includeLevel>false</includeLevel>
>
> <includeCategory>false</includeCategory>
>
> </properties>
>
> </target>
>
> </logging>
Have a check that your remoting destinations are shown starting correctly for both WAR files, and see if there are any messages in the log that might be relevant.

Form on table in remote db, fails when creating

Creating a form based on a table or view is failing in portal (version 9.0.2.2.14A). Here's the details....
1. Created public db link "remotedb"
2. CreateD public synonym to table "mytable for mytable@remotedb"
3. Use create form wizard in portal, entering my synonym as the table to base the form on, just using defaults for now. After clicking on "Finished", I get ora-00980 errors on several lines when it tries to create the package body. The lines coincide with my remote table synonym.
Has anyone else ran across this? I did not get any hits on Metalink, just thought I'd try here before opening a tar.
Thanks.

Hi,
The oracle error you are getting means that
ORA-00980 synonym translation is no longer valid
Cause: The synonym used is based on a table, view, or synonym that no longer exists.
Action: Replace the synonym with the name of the object it references or re-create the synonym so that it refers to a valid table, view, or synonym.
Please do as suggested in the action.
Thanks,
Sharmila

Fails when create oracle internet directory in oracle identity management

Dear All,
I try to configure oracle identity management and always getting error when try to create oracle internet directory.
Running on windows 2008 server, oracle weblogic 10.3.4, oim 11.1.1.2.0.
This is the log file as follow ...
AdminServer port is 7001
trying to connect to VM-WindowsServer2K8 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to VM-WindowsServer2K8 7001
Successfully connected to the Domain Runtime ...
trying to connect to VM-WindowsServer2K8 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@1c58252
VM-WindowsServer2K8 7001
Instance idmfinal_2 already exists, continuing with component creation
D:\Oracle\Middleware\Oracle_IDM1 D:\Oracle\Middleware\idmfinal_2 idmfinal_2
oracle.as.provisioning.util.ConfigException:
Error creating ASComponent oid1.
Cause:
An internal operation has failed: oracle/security/xmlsec/util/Base64
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:414)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:861)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NoClassDefFoundError: oracle/security/xmlsec/util/Base64
     at oracle.security.jps.internal.common.util.JpsCommonUtil.<clinit>(JpsCommonUtil.java:212)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:155)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:166)
     at oracle.iam.management.oid.install.wls.OIDComponentHelper$3.run(OIDComponentHelper.java:2377)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.iam.management.oid.install.wls.OIDComponentHelper.delCredFromCSF(OIDComponentHelper.java:2372)
     at oracle.iam.management.oid.install.wls.OIDComponentHelper.removeCreds(OIDComponentHelper.java:2363)
     at oracle.iam.management.oid.install.wls.OIDComponent.onRemove(OIDComponent.java:423)
     at oracle.as.config.impl.OracleASComponentBaseImpl.remove(OracleASComponentBaseImpl.java:286)
     at oracle.as.config.impl.OracleASComponentBaseImpl.remove(OracleASComponentBaseImpl.java:173)
     at oracle.as.config.impl.OracleASComponentBaseImpl.remove(OracleASComponentBaseImpl.java:154)
     at oracle.iam.management.oid.install.wls.OIDComponent.onCreate(OIDComponent.java:221)
     at oracle.as.config.impl.OracleASComponentBaseImpl.createComponent(OracleASComponentBaseImpl.java:596)
     at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:105)
     at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:144)
     at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
     ... 15 more
Caused by: java.lang.ClassNotFoundException: oracle.security.xmlsec.util.Base64
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     ... 32 more
progress in calculate progress33
please help me to solve this problem.
Regards,
-Ranubaya

I hit retry and now the "Create Oracle Internet Directory" completed successfully. But now the error is on "Start Oracle Internet Directory". Following error appears in the log file:
*[2011-01-06T17:11:51.929-06:00] [as] [WARNING] [] [oracle.as.config] [tid: 37] [ecid: 0000IpSwWP60jo8yBgpIcT1D9XrH00000S,0] Failed to start component oid1[[*
oracle.as.config.ProvisionException: HTTP status code = 400 : No processes or applications match the specified configuration.
Please assist!

Validation Failed when creating Web Service Proxy

Hi
I am having trouble creating a web service proxy in JDeveloper (11.1.1.3). When I enter the endpoint URL (which is a https WSDL file). I get the following error:
No WSDL document could be found at https://host:port/.../.././...wsdl.
I can open the WSDL in SOAP UI and it accesses it fine and I can call the service within.
When I put it in a browser I need to enter the authentication details before I can view the WSDL.
But I can't get to the next step in the Web Service Proxy wizard, I've had a look in the threads before an couldn't find any help.
Is there anyone who can help me with this?
Regards
Saheem

Thanks John but unfortunatly that didn't help.
I removed the proxy but the WSDL was still not found I also added the host to the Proxy exceptions list and switched the proxy back on but this did not work either.
I also tried the method in the link you provided. But I get an error when attempting to create a Web Service Dasta Control too. The error I get here is:
DCA-40002: The WSDL document is invalid due to the following reason: WSDl Exception: faultCode=PARSER_ERROR: Failed to read wsdl file at: "https://../../..wsdl", caused by javax.net.ssl.SSLHandshakeException. :...........

Miro failed when purchase an asset

Hi Guys,
I have purchase an asset which have not a material and will be valuated during miro. Then when miro system prompted an error, said "Account determination for entry INT WRX not possible". I try to maintain account determination in OBYC, seems need valuation class. But I don't know the valuation class cause the asset have not material no.
How to deal with this problem. Thanks in advance.
Regards,
--Alex

hi
PATH: spro> materials management>valuation and account assignment>account determination>account determination without wizard> congigure automatic posting
or Tcode: OBYC
assing the GR/IR General Leger account to Transaction Key WRX.
plz assing points if useful
regards
ss

Fail when creating routing through bapi.

what are the mandatrory steps to create routing using bapi fm ( bapi_routing_create )?
when i create routing using bapi it is showing the routing is created succesfull but it is not updating in the standard table plko .

after bapi use commit
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

Upload image failed when create image asset

Similar Messages

Maybe you are looking for