Create serial no. automatically check activation -MIGO

In the MIGO transaction ,in the serial number tab want to activate the check box Create serial number automatically.Can you please advice what settings or where the config is ? IOS2 tcode settings are done for MMSL prodcedure but no result,is there any thing else or anywhere else the setting.
Edited by: mysap query on Dec 2, 2010 6:37 PM

Hello,
Please go to the customization for serial number profile and check which 'usage' you are defining.
For example, serial number usage 04 is not supported for serialization procedure
MMSL.
In addition, please check if you are manipulating the serial number creation via user exits EXIT_SAPLIPW1_008   or EXIT_SAPLIPW1_001. It could a reason to see a different behaviour in MIRO.
Basically the field GOITEM-XSAUT is presented if the material has a serial number profile determined into the material master and based on the configuration of this profile.
The flag 'Create Serial Nos Automatically' in transaction MIGO means that the serial numbers are being created when saving the goods receipt. The numbers of these serial numbers are not displayed upfront. You can find the serial numbers only afterwards when displaying the created material document.
I hope it helps you.
Regards,
Fábio Almeida
MM consultant

Similar Messages

Disable Create Serial No. automatically Check box in MIGO

Hi,
I have a problem where in I need to disable Create Serial No. automatically check box in MIGO while posting GRN. And I could not do anything with the profile of the serial nr in t-code OIS2.
You can give me some information that help in this question.
Thanks in advance.
Ramesh

Hi,
Thanks for ur answer Sheshu.
Sorry for the delay.
I have created screen variant for that Serial number tab sub screen and assigned Output only option for that check box. Thn i created a transaction variant and assigned that Screen variant to it. At last i assigned and activated that Transaction variant to Standard Variant of MIGO. All these are done in SHD0 tcode.

Desactive the option "create serial number automatically"

Hello
I´am using serial numbers for certain materials with Stock check, and in my serial number profile the procedure MMSL (maintain goods receipt and issue doc.) is set the serusage 03 (obligatory).
I need this configuration, so I can control stock for which serial number, and this serial number can´t be set automatically, it was to be write down by the users.
The problem I have is that when I´am doing a material movement, for example, mvt 501 in MB1C or in MI04 to register the inventory count, the series number is obligatory has I want, but the system gives the user to "create automatically serial numbers", and when the user do that is creating new serial numbers sequential by the number range I gave. What I Want to know is:
Is there any way to disable this option of "create serial numbers automatically???
Thank you very much for your help
Best Regards
Carla

MAHA REDDY wrote:
Hi All,
I am trying to generate the serial no on the form by this coding
i have taken non data base field SI_NO
IF :system.record_status IN ( 'NEW' ,'INSERT' ) THEN
:XXEAM_JOB_TEMPLATE_LINES.SI_NO := :System.CURSOR_RECORD ;
END IF ;
If I am deleteting a record from the middle of the record the sequence on the serial number does not gets changed eg. if there r 5 records if I delete 3 record then the sequence of serial number will become 1,2,4,5 where as it should become 1,2,3,4
same is the issue if I add a record in the middle the serial number gets duplicate eg if there r 5 record and i am adding another record after 2 then its coming like this 1,2,3,3,4,5 where as it should come like this 1,2,3,4,5,6
Hi Maha,
You can use PRE-RECORD trigger at block level and if you write
:TXT_SL:=:system.trigger_record;you will get serial no. After deleting or adding it will not re-organize your serial no un till you navigate at other record. If you navigate through out the record, it will
re-organized.
If you want it dynamically, you need to do a loop after any interaction in records.
Hope understand..
Hamid

Create purchase order automatically from Sales order.

Hi,
I have ticked Create purchase order automatically check box in item category TAS and TAB but still not able to generate Purchase Order automatically.???
any clue.
thanks/ashu

You need to have your prerequisites in place for the automated creation of the purchase requisition before the purchase order can be raised:
You may already have done this, but check that your material has the purchasing information on it (trxn MM02, purchasing tab), that a purchasing information record exists for that material and vendor in that purchasing org (trxn ME12), check that a source list exists as well (trxn ME02). If you have created the source list or purchasing info record after the sales order has been created then you will need to go into trxn ME56 to assign them manually. That should release the PO to be created.
In standard 3rd party, the PO is created using ME59 (prog RM06BB20), which can be run as a batch job.
Jon

How to create automatic po from migo?

enter Vendor
Message no. M7018
i want to create automatic PO from MIGO and i put the vendor in partner field vendor but this msg is issued

Hi There
Pre req for Auto PO
1. Material master - P View- Auto PO enabled, and Material should be Valuated material and Procurement type should be F.
2. Plant should be assigned to STD p Organ
3. Vendor Master enable the Automatic PO
4. Info Record with the Valid Price
5. In Purchasing define default values for document type(PO) independent of transaction(MB01)
6. Inventory Management- Movement Type- 101 and 161 Auto PO should be enabled
7. Manual Entery @ the time of MIGO- Material , Plant, Location, Vendor and Qty
You will get the PO, Material Document and Acc Document,,,
Cheers
Senthil

How to create Oppertunity doc automatically after lead in CRM SALES

Hi,
how to create oppertunity doc automatically after creating lead in crm sales
Thanks7regards
kishor kumar

Hi Kishore,
Create SAP Business Workflow for Opportunity from Lead
Use
A lead is a business transaction that describes, stores, updates, and manages the potential business interests of a business partner, and the interactions based on this over a period of time. The goal is to provide the "sales" area with the information gained in the lead, in order that it can be used as a basis for deciding whether to create an opportunity.
The information gathered in the lead is transferred to the "sales" area via the workflow "create opportunity from lead".
In the workflow, you decide whether the opportunity is generated manually or automatically.
If the lead-specific attributes Priority and Lead group fulfill specific criteria, the workflow automatically generates an opportunity. Otherwise, the workflow sends a work item to the sales employee responsible, for manual creation. Once he has checked the data in the lead, the sales employee can either reject this lead or create an opportunity from it.
The workflow is automatically started when the lead is saved.
The sales representative entered in the lead is first taken as the sales employee whose task it is to create the opportunity based on the information in the lead. This person can be determined using partner determination in CRM, depending on the prospect in the lead, and can, for example, be a manager of a sales area. If no sales representative is entered, the workflow takes an organizational unit assigned in the workflow template, and sends the work item to all users assigned to the organizational unit.
Prerequisites
u2022     The type linkage for the start events AttributeChanged and SetErrorFree for the workflow WS10001011 are deactivated as a standard procedure, and, if you wish to start the workflow template, they have to be activated again in Customizing. The workflow task processors must also be maintained. In Customizing, choose Customer Relationship Management  Basic Functions SAP Business Workflow  Perform Task-Specific Customizing.
u2022     The workflow template uses the user statuses SAAC (accepted by sales) and SARE (rejected by sales) of the status profile CRMLEAD. If you have defined several user statuses, the data flow for task TS10008154 (set status) must be adapted accordingly.
u2022     When the opportunity is created, the workflow template uses the opportunity transaction type OPPT. If you have defined several transaction types for the opportunity, the data flow for task TS10008151 (create opportunity) must be adapted accordingly.
u2022     If the sales employee rejects the lead, the workflow resets the qualification level to value 02 (warm). If you have specified your own qualification levels in Customizing, you need to adapt the data flow for task TS10007918 (change qualification level) accordingly.
Process of Workflow WS10001011 (create opportunity from lead)
The workflow "create opportunity from lead" is started when a lead is saved with qualification level Hot and status Error-free. The system uses the lead-specific attributes Priority and Lead group to check whether an opportunity can be automatically created, or a sales employee first needs to decide. If the sales employee decides that an opportunity can be created, the lead status is set to "accepted by sales", and an opportunity is created in the background. If necessary, this is forwarded to the sales employee to check. If the sales employee rejects the lead, the lead status is set to "rejected by sales", and the initiator is informed by mail.
The workflow is ended if no opportunity is created and
o     the lead is deleted or
o     the qualification level of the lead is changed to a value other than Hot or
o     the status of the lead is changed to a value other than Error-free.
Path for the workflow:
==> SPRO
==> Customer Relationship Management
==> Basic Functions
==> SAP Business Workflow
==> Perform Task-Specific Customizing
Select the Application Componenet Abbrevation as CRM and expand
Select CRM-BTX and expand
Select CRM-BTX-LEA and click on Activate event linking and acivate workflow WS 10001011
It may helps you
Regards
Narayana

Copy project description (defined in WBS Level 2) automatically to activity

Hi Gurus,
How to copy project description (defined in WBS Level 2) automatically to activity name/description?
For example:
WBS element (Level 2): "Telephone System Replacement"
When create a new Activity, the description will be: "Telephone System - xxxxxxxx"
The first 16 characters "Telephone System" from the WBS Level 2 are automatically populated to Activity Short Text field.
How to realize that?
Thanks.
JM

>
Virendra Pal wrote:
> you can use substitution rule
> transaction OPSN
> check out the standard substitution fields available
> if not you can always use an exit in substitution
>
> In the project profile enter this substitution and check the auto box
>
> This then on save will carry out substitution - use Intermediate save button and then add or replace the xxxxxxx
>
> Edited by: Virendra Pal on Nov 27, 2009 12:26 PM
Thanks Virendra!
I am new to PS, could you please explain in more detail?
In OPSN, I am not sure which one to choose: Network Header or Network Activity, for my case. Looks like there are no standard substitution fields available. Could you please check it out for me? If no, how to use an exit? Is this exit the same as a user exit used for enhancement?
Sorry, so many question marks. You help will be greatly appreciated!
JM

Unicode Check Active

Hi All,
I want to know about "Unicode Check Active" in ABAP Editor Program Attributes.I don't know anything about this.I want to know
What is Unicode Check Active.
How to Activate this Check Box.
what is meant by Code Pages.
What is UTF-8 UTF-16 & UTF-32.
What is the Use of It.
In ABAP Code the Unicode Check Doesn't Support the some syntax like Open Data set and Describe Lines like that what are all the syntax in ABAP it doesn't support.
Can anybody give me the clear idea about this.So, it will be very helpful to me.This is very urgent.Surely i will reward more points.
Thanks,
Swapna.

Hi,
Unicode Check is one of the latest enhancement in SAP which has been done so as to provide SAP product in almost all the language that is spoken in the world.
A program as to be made Unicode check Active in its attribute so that it can be used in Unicode enabled SAP system.
what is unicode?
From Release 6.10, ABAP supports multi-byte coding for characters in Unicode. Prior to Release 6.10, ABAP used only character sets that were based on single-byte codes such as ASCII and EBCDIC or double-byte codes, such as SJIS and BIG5.
what is unicode enabled program?
A Unicode-enabled ABAP program is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system as in a Unicode system .In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
Type of errors in unocode check.
This switch to Unicode affects all statements where an explicit or implicit assumption is made about the internal length of a character. If you use these statements in a program that is designed to exploit the Unicode capabilities of the runtime environment, they must be checked and changed if necessary. Once a Unicode-enabled program has been changed accordingly, it behaves in the same way in both Unicode and non-Unicode systems. You can develop programs in a non-Unicode system (NUS) and then import them into a Unicode system
UNICODE CHECK ACTIVE:
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
Call transaction SAMT
Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasnt the person who set this up originally so I'm a bit

Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasn't the person who set this up originally so I'm a bit lost, i cant seem to find any serial numbers on the my account section and it seems we have no registered products? can you help?

Hi There,
We have checked the details of your team, all seat are assigned properly.
Now there are few details that we would need in a Private Message so that I can assist you appropriately.
Name of the user:
Email of the user:
Meanwhile, try the below mentioned links.
Creative Cloud applications ask for serial number
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
[Note: Details that we need is critical, make sure you send them in via Private Message only.]
Thanks,
Atul Saini

ITunes automatically checks Manually manage music and videos????

Every time I connect my Classic or Nano, iTunes automatically checks Manually manage music and videos. If you uncheck this option it wants to erase your iPod, Classic or Nano and create a new sync which takes hours.
So to be specific. When start the first sync I have the following checked:
Open iTunes when this iPod is connected.
Enable Disk use.
After doing a 2 hour sync and then reconnecting, it has automatically checked Manually manage music and videos. When you uncheck it wants to reload your entire Library. Which takes 2-3 hours. The problem with Manually..... it doesn't sync new additions to the Library.
I am starting to become an Apple hater. They are going the way of Microsoft. You call Apple tech support and they want to charge you per incident. And Lion is a disaster. I was an early convert to Apple and now I am getting really cranky.

I was thinking the other way.
Checking Manually manage Music and Videos does not erase the content (even though it says it will).

Can't add .ACSM files to ADE, message: "Error! Check activation"

I am using Adobe Digital Editions 4.0.3 with a NOOK Simple Touch, running on a 64-bit 2009 Windows 7 machine. Recently I have been unable to download my library ebooks to my Nook. The electronic library I am using (a derivative of Overdrive, I think) only allows the download of books in the .acsm format. However, recently, I am unable to open the books in ADE. Instead, the only option I have is Adobe Reader. When I select the 'Browse' option and choose ADE and hit 'OK', nothing happens and it doesn't show up as an option. When I try and manually add a file to my ADE library, I get an error message saying 'Error! Check Activation". The only thing I even got halfway working was when I downloaded ADE 1.7.2. I got the .acsm files into the library (still, I had to add them all manually through the ADE interface). However, my NOOK will not open these files, even when using ADE 1.7.2. These are the things I have tried:
-Downloading an e-book (in .acsm format) from the Digital Editions free book selections. Same issue
-downloading and redownloading Adobe Digital Editions 4.0.3 (and removing the other program)
-Downloading and redownloading Adobe Digital Editions 1.7.2 (and removing the other program)
-Deauthorizing ADE (Every time it just says "Unable to erase authorization. Please try again after some time.")
-Adding a book in ADE 1.7.2, getting ADE 4.0.3, transferring the book to the newer software, deleting 1.7.2, and syncing my nook with 4.0.3. Nook says it's not authorized
-Doing a factory reset of my NOOK
-Unblocking the .acsm files by going to Properties>General
-TRYING (and failing) to automatically associate .acsm files with Adobe Digital Editions. Like trying to open a downloaded file with ADE, I get no response when I browse and select i
(SIDE NOTE: my Adobe IDs all match. I know that is also not the issue).
I think the issue here is that something is preventing .acsm files from opening in ADE, and nothing in particular is wrong with my NOOK. My only guess (which is probably misguided) is that Windows can't process my request for ADE to be the program to open .acsm files because it's in the x86 program files folder and not the default Program files folder. I've never heard of that being a problem but I can't think of another reason.
If anyone has any ideas, please give them to me. I am actually typing all this for my grandmother, and she is going crazy without her library books.

On the deactivation issue- I just had a similar issue where I could not deactivate and had to manually deactivate by deleting the activation information from Windows registry. That might help you as well.
Follow the instructions below the disclaimer on this page: Error "E_AUTH_NOT_READY" | Digital Editions
Or if you are more computer savvy, simply close Adobe Digital Editions and then delete this registry key:
HKEY_CURRENT_USER\Software\Adobe\Adept

How to create sales order Automatically with reference to contract?

how to create sales order automatically through batch or online? can anyone please suggest what needs to be change in SAPMV45A program?

Hi,
Wt am able to understand from the above question is, you want to create automatic sales order against contract on a day to day basis by doing batch program, hope am wright.
See you can do it in two ways.
1. By using BDC, in SHDB T code record how exactly you will do transaction and then give it to your abaper rest he will do. he will write a program and he will schedule that program every day night.
2. By using BAPI. Just check in there are many threads are there which gives sales order bapi. Tell your abaper to map that bapi and tell them to schedule back ground job.
Hope this will help out in solving your problem.
Regards,
Nagesh

How to create credit note automatically after PGR?

Hello SD Gurus,
Client's Business Process: Return Order (ZRE, ZPOR, ZARE, and ZMTR) is created with reference to billing document number and item category used for this order type is REN or ZREN. After the order is created, they do PGR (Return Delivery Type is LR) and then credit memo is created "manually". So, the issue with this process is that it is very time consuming and a lot of manual intervention is required.
To-be Process: The requirement is to create credit note "automatically" after the PGR is done to reduce the manual intervention and expedite the process. If item category is REN, then credit note will be created with invoice value. If item category is ZREN, then credit note will be created with Zero Value.
How should I write code in the user exit MV50AFZ1?
Regards,
Mohammed Anwar

Hi
Apart from Lakshmipathi's suggestion you can share the below logic with your ABAPER. There are two BAPIs we use to create billing automatically. Check whether you can call these BAPIs in userexit you have mentioned in your post.
CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
* EXPORTING
*   CREATORDATAIN         =
*   TESTRUN               =
*   POSTING               =
        TABLES
          billingdatain         = billingdatain
          conditiondatain       = conditiondatain
*   CCARDDATAIN           =
*   TEXTDATAIN            =
*   ERRORS                =
          return                = return3
          success               = success
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      READ TABLE return3 WITH KEY type = 'E'.
      IF sy-subrc = 0.
        record-inv_rem = return3-message.
      ENDIF.
      WAIT UP TO 2 SECONDS.
*      READ TABLE return3 WITH KEY type = 'E'.
*      IF return3-type = 'E'.
*        WRITE:/ return3-message.
*      ENDIF.
      READ TABLE success INDEX 1.
      CLEAR: vbeln_vf.
      vbeln_vf = success-bill_doc.
    ENDIF.
Thank$

Automatic Check updation through Payment

Dear Friends,
How to do Automatic check updation through payment please give the process steps and Tcode
with regards
Raghavendra.

Hi,
Create Check lot in FCHI
Then make the Payment through F-58.
In Initial screen given company code, Payment Method,house bank, account id check lot then press payment.
Automatically the check number will be allotted from check lot sequentially.
Do not forget to manually fill the assignment field with check number for BRS
Edited by: lolu jo on Oct 28, 2011 3:53 PM

How to get serial no automatically in table maintainance generator

Hello Experts,
I am building table maintainance generator in that i want the serial number shold be displayed or generated for new entry automatically.
please mind this, i am going to put more that one entry at single time and my serial number field is primary key in table .
Thanks,
Gaurav

In table maintenance we can add an event during new entries creation, in that add code to read the table for the last entry and increment one to it. Hence whenever a new entry is created serial number value is generated.

Create serial no. automatically check activation -MIGO

Similar Messages

Maybe you are looking for