Create Sharepoint 2013/2010 Modal Forms for New Items, Multiple Lists
I have a main page with 4 buttons. Each button is linked to a different list. My question is: how can I make it so that when a user clicks on a button, the new item form pops up? And then, once submitted, the new item form closes and the user is once again
looking at just the mina page?
I have seen many suggestions on the web for multiple buttons with one list, but not any for multiple buttons for multiple lists.
I am relatively new to JQuery/coding, so if you have an answer please explain it in detail (think "Coding for Dummies," or some such format). I use a JQuery Doc. Library, and a Content Editor to reference to the specific JQuery I want to use.
That is about as far as I have gotten on this.
Any help would be greatly appreciated!
Hi Cameron,
I do have access to InfoPath. How would I do it through there? If it's easy and already designed within the program, I would much rather do that!
As for the link you gave me - would you mind explaining it to me? I clicked on it and read the blog, but I'm confused on these things:
1) How do I use the code to apply to 4 different lists, each attached to it's own button?
2) I have the buttons already put on the page - how do I connect the code to said buttons?
3) How would I make sure that each pop up closed upon form submission?
I really appreciate your help! Thank you!
Similar Messages
-
Can we create a fillable W4 form for new hires and sign it electronically
Can we create a fillable w4 form for new hires. can the new hire sign electronically and what is the cost for having electronic signatures?
We don't support electronic signatures. You should check out our sister service Adobe Echosign - www.echosign.com
-
Sharepoint 2013 workflow does not start when item is created by another workflow
Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that creates a new item in List B. The problem is that when
de workflow in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?
0down
votefavorite
Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that creates a new item in List B. The problem is that when de workflow
in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?
0down
votefavorite
Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that
creates a new item in List B. The problem is that when de workflow in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?Hi Courfeyrak,
Here is another similar post with a workaround, you can try using the event receiver on listB item to start the workflow, when the listB item is created or updated by the workflow associated with listA.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/19f71e38-7c04-430e-aa6b-764cbbf18c1c/2013-workflow-does-not-start-on-item-created-by-a-different-worklow?forum=sharepointcustomization
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support -
Create SharePoint 2013 hosted app using visual studio 2013
i tried to create sharepoint hosted app, i just created a new project and try to deploy it but it failed every time with different error sometimes system account can't run the project, created another administrator and try to re deploy it so i had a new
error that the visual studio project need a administration permissions and i already grant the administration permissions for the new user, any one can provide a complete tutorials on how we can create new hosted sharepoint app using visual studio 2013
Mohamed AbdeenHi,
According to your post, my understanding is that you want to create SharePoint 2013 hosted app using visual studio 2013.
Here are some great blogs for your reference:
How to: Create a basic SharePoint-hosted app
My First Sharepoint-Hosted App in 2013 - CodeProject
Setting up your App domain for SharePoint 2013
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Create Multiple tasks for Single Item in List using state machine workflow in sharepoint
Hi,
I want to create multiple create tasks for Single Item in List based on Assigned to column using state machine Workflow through visual studio
Here Assigned to column allows multiple users. so i have to create task for every user based on column .
I'm trying for this but i didn't got any solution
Please provide solution for this.Hi,
According to your post, my understanding is that you wanted to allow multiple users to approve.
There are some articles about creating parallel tasks in state machine workflow, you can have a look at them.
http://www.codeproject.com/Articles/477849/Create-Parallel-Task-in-State-Machine-Workflow-in
http://msdn.microsoft.com/en-us/library/office/hh128697(v=office.14).aspx
http://social.technet.microsoft.com/Forums/office/en-US/b16ee858-4360-479a-a686-4ee35b7be9db/sharepoint-2010-workflow-creating-multiple-tasks?forum=sharepointdevelopmentprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Create SharePoint 2013 workflow using visual studio 2013
Dear Team,
How to create a workflow for template approval process using visual studio 2013.To achieve this do i need to install share point on my machine.Hi,
According to your post, my understanding is that you want to create a SharePoint 2013 workflow using Visual Studio 2013.
We need setting up and configuring Microsoft SharePoint Server 2013 and the Workflow Manager Client 1.0 server, see Start:
Set up and configure SharePoint 2013 Workflow Manager.
The following materials for your reference:
Develop SharePoint 2013 workflows using Visual Studio
http://msdn.microsoft.com/en-us/library/office/jj163199(v=office.15).aspx
How to: Create SharePoint 2013 Workflows using Visual Studio
http://msdn.microsoft.com/en-us/library/office/dn584771(v=office.15).aspx
Developing SharePoint 2013 workflows with Visual Studio demo
http://www.bing.com/videos/watch/video/developing-sharepoint-2013-workflows-with-visual-studio-demo/10t0er5gh
Best Regards
Dennis Guo
TechNet Community Support -
Need default value to populate for existing items in list column.
I have a list that I have been working with for a while. I recently added a new column and made it a choice type with a drop down list. I have set the default value to "Not Started" (an option in my drop down list) but it seems it will only
populate for new items created in the list, not existing ones as well. Is there any way to have it populate for the existing items as well? Thank you in advance for your help.Hi Russ,
You can do so by opening the list in the datasheet view and paste "Not Started" for all items in the new column you have created.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration*** -
How to create a Payment Form for access to multiple secure zones
I'm trying to create a Payment Form that allows the user to select from a dropdown of videos, each of which represents a secure zone page with an embedded video.
What I can't figure out -- and tech chat can't help -- is how to redirect the user to the correct secure zone for the video they purchased.
Videos are are streaming, vimeo embeds, not downloads.
Anyone know how to do this? Can post link to test form if you need it.
Thanks!
jerryHi,
This can be done for already available list. Have a look at the following steps:
Create an Empty SharePoint Project, then right click the project, add SharePoint “Layouts” Mapped Folder.
Right click the project name, add New item Application Page, then add the custom code there.
Under Features, add a feature, right click the added feature then add an event receiver, override the FeatureActivated method to set the new edit/new form as the default form.
How to set new form as default form:
SPList lstTest = web.Lists["Shared Documents"];
string newUrl =
string.Format("layouts/NewEditForm.aspx", web.ServerRelativeUrl, lstTest.RootFolder.Url);
var form = web.GetFile(newUrl);
if (form !=
null && form.Exists)
//string newFomrUrl = lstTest.DefaultEditFormUrl.Replace("EditForm.aspx", "docEditForm.aspx");
lstTest.DefaultEditFormUrl = newUrl;
lstTest.Update();
For more information, see
http://community.bamboosolutions.com/blogs/sharepoint-2010/archive/2011/05/12/sharepoint-2010-cookbook-how-to-create-a-customized-list-edit-form-for-development-in-visual-studio-2010.aspx
To add a custom list form, the best way I think is using SharePoint Designer 2010, it’s very fast.
Regards,
Kelly Chen -
SharePoint 2013 Parent/Child Form
All,
I am completing some audits on accounts with audit names: AuditA, AuditB
I have a SharePoint list 'AuditPopulation' with the following columns:
AccountNumber
AuditName
Then as we are auditing accounts we have audit questions based on the applicable audit. Therefore I have a list called 'AuditQuestions' with the columns:
QuestionID
Question
Answer (Pass/Fail)
AuditName
I am struggling with how to link to the two lists and create a form (most likely in InfoPath) that will display the list of Questions for AuditA when the user clicks the AccountNumber in the 'AuditPopulation' list.
Thank you in advanceYou can use jQuery and Web Service to achieve this task using SharePoint Designer. Refer to the following post for more information
http://sharepoint.stackexchange.com/questions/6493/how-to-automatically-link-parent-in-child-list-new-form
http://go.limeleap.com/community/bid/246651/Creating-Forms-for-SharePoint-Using-SharePoint-Designer-2010
http://www.sharepointdrive.com/blog/how-to-establish-a-parent-child-relationship-in-sharepoint/
--Cheers -
Sharepoint 2013 pass custom form data
I am asking the question since this is my first project working with Sharepoint 2013.
Here is the project requirements:
1. I created a custom list for users to enter data in a custom form that is modified by Infopath 2013.
2. Once the user clicks the 'save' button on the custom form, the workflow is started and the workflow will be waiting for certain users to accept or reject the form.
3. If the form is rejected the user needs to make modifications and the form can be resubmited.
4. Once the custom form is accepted, the user will be required to submit bimonthly updates on the progress of the request they made based upon the start and end dates submitted on the original form.
5. After the custom form as been accepted, a master/detail will be setup with the master being the accepted form and the bimonthly updates will be details.
Here are my question:
I want to pass the information from the accepted form to the master/detail form that will do the following 'Once the custom form is accepted, the user will be required to submit bimonthly updates on the progress of the request they made based upon the
start and end dates submitted on the original form'. Would you tell me how to pass the information from the accepted custom form to being the 'master' part of the master/detail form I just mentioned?
Is this a good solution? If you how would you change the design and how would you make these coding changes and what would the design change be?Hi Scampsman,
Based on your description, my understanding is that you want to pass data from one InfoPath form to another InfoPath form in SharePoint.
To achieve this goal, we can write code in the details form with FormEvents_Loading to capture and display the incoming parameters passed from the original form.
Please refer to the link below for more detail steps(same for InfoPath 2013):
http://sharepointbeeeye.com/infopath-2010-passing-data-between-forms/
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Customize Sharepoint 2013 Blog Post forms and layout
I have a blog site that will be home to customer call reports saved as posts to the blog. The blog works, but how do I get all the custom columns to show on the blog home page that shows all of the posts. Currently, only the Posted Date, Notes, and Title
field display.Hi Jim ,
According to your description, my understanding is that you want to display custom columns in your home page posts web part.
Please go to the home page -> Edit Page -> Edit the Posts Web Part ->in the Posts Web Part Settings Page , click Edit the current view -> check the column you want to display and click OK.
The fields are now available to be rendered as part of the current view.
Then we need to create the custom JavaScript file that will render the new fields for the post body. You can refer to the blog:
HOW TO: Add a custom field to blog posts in SharePoint 2013
Hope this helps!
Best Regards,
Eric
Eric Tao
TechNet Community Support -
What SharePoint 2013 doesn't support for Excel
Hi,
it seems that SharePoint 2013 continues to don't support the same Excel features as SharePoint 2010. Fe, macro, data validation, cell editing, etc.
This is a bad notice for who use SharePoint as delivery platform for BI needs.
Now, I'd like to know what SharePoint 2013 has improved to support Excel and what new releases will support?
ThanksI think these articles may help:
http://technet.microsoft.com/en-us/library/ee424405(v=office.15).aspx
http://technet.microsoft.com/en-us/library/jj219751(v=office.15).aspx
Andy Wessendorf SharePoint Developer II | Rackspace [email protected] -
Enable Sharepoint 2013 SkyDrive Pro Synch for some site
Good day,
How do you enable SkyDrive pro for some libraries, i have only found the switch that enables for all or for none. Can this be configured via Powershell ? and how thanksHi Franciske,
According to your description, my understanding is that you want to sync multiple SharePoint 2013 libraries with SkyDrive Pro.
For enabling SkyDrive Pro for some SharePoint libraries, you can click ‘SYNC’ at the top of SharePoint web site, then you can select which library is synchronized to SkyDrive Pro. Or you can use SkyDrive Pro directly by right-clicking it and selecting ‘Sync
a new library’, then type the URL of the library that you want to sync.
You only sync one library to SkyDrive Pro at once time. So , for synchronizing multiple libraries, you need to sync multiple times.
More information, please refer to the links:
http://www.pallareviews.com/1113/sharepoint-2013-office-15-skydrive-sync-now-capabilities/
http://support.sherweb.com/Faqs/Show/how-to-sync-your-sharepoint-2010-document-libraries-with-skydrive-pro
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
SharePoint 2013 allows downloaded even for users with "view only" permissions
I have a new on premises SharePoint 2013 server and assigned a single user "view only" rights to a document library. In the "permission levels" window, this permission is described as "Can view pages, list items,
and documents. Document types with server-side file handlers can be viewed in the browser but not downloaded."
Once I gave the user that permission, I noticed he was able to view documents in the library but the "but not downloaded" part does not seem to be working. The user can still download documents to his local desktop and SharePoint does not prevent
it. The "download a copy" option appears and the user can use it.
My goal is to make all documents in this library such that users can only view them in the browser and not download a local copy. How I do that?
Thanks for your help.Not entirely positive :-)
However, you have no server-side handlers in place today without WAC installed, so that portion of the View Only permission wouldn't be applicable.
Note that WAC must be installed on its own server and if your SharePoint server is extranet or public facing, it needs to have a valid, public SSL certificate. Also, WAC should always be run over SSL regardless if it is public facing or not as the token
sent between the SharePoint server and WAC is the same as having a username and password for the user making the request.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
SharePoint 2013 SQL Server Edition for BI Features - must be on SharePoint SQL Server?
I need to install SQL Server 2012 for a new SharePoint 2013 installation.
Let's say I want to use the BI features of SharePoint 2013 like PowerView.
I already have a separate SQL Server running SQL Server 2012 BI Edition that is used as the database server for our data warehouse and some apps. But this SQL Server will not be used to house the SharePoint 2013 databases.
Do I need to install SQL Server 2013 BI Edition on the SharePoint 2013 SQL Server (where the SharePoint 2013 databases will be housed) or can I used SQL Server 2013 Standard Edition on that server and utilize the BI Edition on the data warehouse server to
use the BI features of SharePoint?Yes, BI or Enterprise must be installed on the SharePoint server in order to integrate SSRS. PowerPivot can be on a separate server with just a download (http://www.microsoft.com/en-us/download/details.aspx?id=35577) for certain components residing on
the SharePoint server. This will give you PowerView, as well.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
Is there a way to password protect my 3g?
there is way too much personal info on my iPhone.. is there a way to lock it so only I can access it?
-
CRM 5.0 ISA insert new price condition from order entry screen
In CRM 4.0 we wrote a custom field on the order entry screen that shows the list price (sub 1), we allow the user to change this value (inserts a PB00 price condition in the item pricing) and validates the change is within a certain % of the list pr
-
Campus Data Collection on idle state
Hi, Clarke. Please help me with a problem about campus data collection on lms 3.2 I tried to run a data collection on campus manager home page. but ever i did i got idle state, and ANIserver have the flag busy. I read in your answer to other guys and
-
Any Video Control Surface Recommendations?
Hi Guys, It's been some time since i've posted here i must admit, but i had a quick question and i'd appreciate some opinions! I have been editing videos for individual and corporate clients for a while now, and have been utilising logic etc to recor
-
Extreq Transfer with source of supply assigned
Dear all, We are on SRM 7.0 PDP scenario. Purchase Requisitions with Contracts assigned are being transferred to SRM. We expect these purchase requisitions with an assigned source of supply not to be transferred to SRM. How can be solved? Thanks Ezeq