Sharepoint 2013 pass custom form data

I am asking the question since this is my first project working with Sharepoint 2013.
Here is the project requirements:
1. I created a custom list for users to enter data in a custom form that is modified by Infopath 2013.
2. Once the user clicks the 'save' button on the custom form, the workflow is started and the workflow will be waiting for certain users to accept or reject the form.
3. If the form is rejected the user needs to make modifications and the form can be resubmited.
4. Once the custom form is accepted, the user will be required to submit bimonthly updates on the progress of the request they made based upon the start and end dates submitted on the original form.
5. After the custom form as been accepted, a master/detail will be setup with the master being the accepted form and the bimonthly updates will be details.
Here are my question:
I want to pass the information from the accepted form to the master/detail form that will do the following 'Once the custom form is accepted, the user will be required to submit bimonthly updates on the progress of the request they made based upon the
start and end dates submitted on the original form'. Would you tell me how to pass the information from the accepted custom form to being the 'master' part of the master/detail form I just mentioned?
Is this a good solution? If you how would you change the design and how would you make these coding changes and what would the design change be?

Hi Scampsman,
Based on your description, my understanding is that you want to pass data from one InfoPath form to another InfoPath form in SharePoint.
To achieve this goal, we can write code in the details form with FormEvents_Loading to capture and display the incoming parameters passed from the original form.
Please refer to the link below for more detail steps(same for InfoPath 2013):
http://sharepointbeeeye.com/infopath-2010-passing-data-between-forms/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

Forms based authentication in sharepoint 2013 using custom membership provider

I am developing FBA for SP2013 using custom membership provider using the following link
http://benredl.wordpress.com/2012/10/03/creating-forms-based-authentication-and-user-profiles-in-sharepoint-2013-using-custom-membership-and-role-providers-and-a-custom-user-profile-synchronization-utility/
the feature i am trying to develop is that the user is created using a homegrown asp.net application which uses sql server
and then When that user goes to SP2013 he should be able to login with the username and password created using the homegrown asp.net application
my questions are following
If I follow the article in the link should i be taking the assembly(dll) and deploying it to GAC or will VS2013 automatically do it
Do I have to implement FindUserByEmail and FindUserByName methods ?
if the connectionstring for an asp.net application is in the web.config file where would the connection for the sqlserver go if this application is for SharePoint
TIA

Hi TIA,
try this it contains the code for you and it is ready
http://sharepoint2013fba.codeplex.com/
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

SharePoint 2013 Workflow Custom Task Form

Hi..I am working on SharePoint 2013 workflow using visual studio 2013. In this workflow, i am creating tasks and i want to make a custom task form.
My workflow contains serial tasks. When each user approve, he should specify the next user.
I have added a custom content type and assigned it to my tasks but all i can do is taking the outcome from the task form as integers.
I want the user to approve and choose another user so i can assign another task to him.
thanks..

I believe what you're looking for is the Collect Data from User function, however I don't see that anywhere in a 2013 workflow. This did exist in 2010 workflows.
What you can do is to change this to an InfoPath form and run the workflow that way, assuming there isn't anything you absolutely need Visual Studio for.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Customize Sharepoint 2013 Blog Post forms and layout

I have a blog site that will be home to customer call reports saved as posts to the blog. The blog works, but how do I get all the custom columns to show on the blog home page that shows all of the posts. Currently, only the Posted Date, Notes, and Title
field display.

Hi Jim ,
According to your description, my understanding is that you want to display custom columns in your home page posts web part.
Please go to the home page -> Edit Page -> Edit the Posts Web Part ->in the Posts Web Part Settings Page , click Edit the current view -> check the column you want to display and click OK.
The fields are now available to be rendered as part of the current view.
Then we need to create the custom JavaScript file that will render the new fields for the post body. You can refer to the blog:
HOW TO: Add a custom field to blog posts in SharePoint 2013
Hope this helps!
Best Regards,
Eric
Eric Tao
TechNet Community Support

SharePoint 2013 App Custom Action in Wiki Page

Hi
I am trying to create a SharePoint 2013 App that also has a Custom Action that has to be visible in Pages tab. Code below
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction
Id="COB.SharePoint.Ribbon.NewGroupInExistingTab"
Location="CommandUI.Ribbon" >
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.Templates._children">
<GroupTemplate Id="Ribbon.Templates.NewGroupInExistingTab.OneLargeExample">
<Layout Title="NewGroupInExistingTabOneLarge" LayoutTitle="NewGroupInExistingTabOneLarge">
<Section Alignment="Top" Type="OneRow">
<Row>
<ControlRef DisplayMode="Large" TemplateAlias="Button1" />
</Row>
</Section>
</Layout>
</GroupTemplate>
</CommandUIDefinition>
<CommandUIDefinition Location="Ribbon.WikiPageTab.Scaling._children">
<MaxSize
Id="COB.SharePoint.Ribbon.NewGroupInExistingTab.NotificationGroup.MaxSize"
Sequence="15"
GroupId="COB.SharePoint.Ribbon.NewGroupInExistingTab.NotificationGroup"
Size="NewGroupInExistingTabOneLarge" />
</CommandUIDefinition>
<CommandUIDefinition Location="Ribbon.WikiPageTab.Groups._children">
<Group
Id="COB.SharePoint.Ribbon.NewGroupInExistingTab.NotificationGroup"
Sequence="15"
Description="Custome Actions"
Title="Oltiva DW"
Template="Ribbon.Templates.NewGroupInExistingTab.OneLargeExample">
<Controls Id="COB.SharePoint.Ribbon.NewGroupInExistingTab.NotificationGroup.Controls">
<Button
Id="COB.SharePoint.Ribbon.NewGroupInExistingTab.NotificationGroup.ContentSources"
Command="COB.NewGroupInExistingTab.Command.Notify"
Sequence="10"
Image16by16="/_layouts/images/NoteBoard_16x16.png"
Image32by32="/_layouts/images/NoteBoard_32x32.png"
Description="Uses the notification area to display a message."
LabelText="Content Sources"
TemplateAlias="Button1"/>
</Controls>
</Group>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler Command="COB.NewGroupInExistingTab.Command.Notify"
CommandAction="~remoteAppUrl/Pages/Default.aspx?{StandardTokens}"
/>
</CommandUIHandlers>
</CustomAction>
</Elements>
The above code works fine, but I want the Custom Action to Open in a new Pop up box, like
javascript:SP.UI.ModalDialog.showModalDialog({ url: 'www.google.com', title: 'Default' });
The movement I change the CommandAction to JavaScript, the app breaks, if I remove the ~remoteAppUrl/Pages/.... the app does not work, it does not apper in the site content. and in appcatalog it shows wrong version number and says Valid App package
as no. what am I doing wrong.
Regards, Vikram

Hi Carl,
As a security policy, a new customer cannot upload images and links. You can try to add links as text and upload your images to Onedrive and share it temporarily.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers
if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Eric Tao
TechNet Community Support

Customer Creation - Want to pass custom field data to KNA1(Customer Master)

Hi,
I have created BAPI for customer creation which uses standard program RFBIDE00 for customer creation.
I have appended new custom field(ZZATTR1) in the table KNA1 and its currosponding stucture used in the standard program BKNA1.
Import parameters of my BAPI is one structure which is having this custom field, on executing this BAPI it creates the customer but data which I give through this field is not getting transfered in the table KNA1.
This sstandard progaram uses file to containing customer information, In the BAPI I on the data from the structure to the file and further it gets submitted to the program.
My requirement is to pass the data of teh custom field which I have created, How to achieve this ?
Pls Suggest.
Regards
Vishal

Hi Vishal,
When implementing a customer exit (i.e. field, user etc) have you ever wanted to be able to read additional
field values available in the main SAP program but not available in your exit. Now with the use of
field-symbols you can have access to any field available in the main SAP program. The code below
demonstrates how this is done within a field exit on BSTNR which can be tested using transaction
ME21. Information on creating field exits can be found here.
FUNCTION field_exit_bstnr.
""Local interface:
*" IMPORTING
*"     REFERENCE(INPUT)
*" EXPORTING
*"     REFERENCE(OUTPUT)
create field symbol
FIELD-SYMBOLS: <status>.
Assign value of variable from calling prog to field symbol
ASSIGN ('(SAPMM06E)RM06E-BSART') TO <status>.
Display value retrieved in message
Note: Messages of type i and w are not allowed
IF sy-subrc = 0.
    MESSAGE e003(zr) WITH <status> 'kkk'.
ENDIF.
ENDFUNCTION.
Rewords some point if it is helpful.
Rgds,
P.Naganjana Reddy

Passing asp form data to a .jsp string

Hello and thanks in advance for any help.
I would like to pass form information that comes from a standard form into a URL string as follows:
"http://ui.constantcontact.com/roving/wdk/API_AddSiteVisitor.jsp?loginName=benefitevents&loginPassword=connoisseur&ea=[email protected]&ic=test&first_name=Joe&last_name=smith"
I would then like to pass that string forward to its final destination.
Some more info.
Form data is collected on "register.asp" and then passed to "register1.asp" using form method="post" action="register1.asp".
On register1.asp the form info is processed and delivered to the SQL database.
I am only a beginner with the code (it was done by a programmer who is mostly absent when needed now).
So, I need to know as much of the following as you can help with (in descending priority):
1. How to pass the .jsp string forward assuming the proper variables have been passed in the asp code.
2. Where should this command live, in register.asp or register1.asp?
3. How to correctly insert the variables in the URL string from form (correct syntax using asp).
As may be obvious this is for one registrant at a time. The object is deliver the registration information to my SQL database and, at the same time, pass some info to a Constant Contact list. This allows me to integrate Constant Contact into my services to clients seamlessly.
Thank you, hope this was not too much info!
Jim

Javascript is not the same as Java.
There are JS related forums at webdeveloper.com. But I would rethink about the JS approach. It should also be able with ASP and I would prefer that.

Sharepoint 2013 workflows and Due date

hi, i'm a sharepoint designer 2010 user, and i recently migrate to sharepoint 2013 (and use sharepoint designer 2013).
I understood it was impossible to migrate sharepoint 2010 workflow to sharepoint 2013 workflows ! But it was possible to call 2010 workflow from 2013 worikflow.
However, i thought i could reproduce workflow under SPD 2013. I recently discover that was not as possible as it seems
for example, it was possible to escalate a task after due date, under SP2010 workflow. I try to reproduce it under sharepoint 20103 workflow, but it seems not to be possible any more (i read this article >>
link <<!
Does any sharepoint's expert can confirm it to me !?
Mon blog : http://spinfopath2010.blogspot.fr/ Sharepoint online 2010 Sharepoint Designer 2010 - InfoPath 2010 - newbie level !

Also please note that you can combine both workflow engines together! It means you can create 2013 workflow using the new model and if you face any action which is no longer available (and you cannot find any other way, e.g. impersonation step) -
you are able to just easily invoke 2010 workflow with its set of actions.
To do so, please read following article, which also describes why some features are no longer available and how to implement these deprecated activities in 2013 environment:
http://msdn.microsoft.com/en-us/library/jj728659.aspx
Hi martin,
Yes, i know i can call a 2010 worklfow from a 2013 one, but it seems to me "tricky", and not a very good practice. Because, these workflows can be either deprecated or abandonned.
I prefered to use a "full" 20130 workflow instead of mixing it with an older version
Anyway, if there is no other way, i'll do it
Mon blog : http://spinfopath2010.blogspot.fr/ Sharepoint online 2010 Sharepoint Designer 2010 - InfoPath 2010 - newbie level !

SharePoint 2013 Online : Custom List view xslt webpart UI vs List View WebPart UI with search ? How to create a xslt list view webpart same UI as list View webpart ???

I have created a xslt list view webpart but I does not have UI as SharePoint 2013 list view UI.
how I can have it.
Ahsan Ranjha

Hi Ahsan,
According to your description, my understanding is that the UI is different between XSLT web part and List View web part.
Per my knowledge, the List View web part is a kind of the XSLT list view web part which uses XSLT to display data on the page.
http://sharepoint-videos.com/list-view-and-data-view-web-parts/
How did you add the XSLT web part and the List View web part?
Could you please provide a screenshot of the two web parts?
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Power Pivot 2013 Using SharePoint 2013 List as Source Data

Background: On a SharePoint 2013 site, there are lists that have the exact same columns but due to their size I had to create a different list for each year.
These are essentially my data lists or tables that end users enter data into. These lists have look up columns in them, referencing columns from look up lists or tables located on the same site.
Goals:
1) Create a Power Pivot Gallery on SharePoint 2013 that is able to leverage the "manage data refresh" feature using the SharePoint 2013 List data that is on the same SharePoint 2013 site.
2) Combine all the data lists/tables into one table once in Power Pivot 2013. The Look Up lists/tables will remain separate.
Challenge: Being able to merge or do a union query to the "data lists" and still maintain the ability to leverage the "manage data refresh" feature.
This is a tactical, quick fix solution, and I
cannot use SQL Server and am operating under the assumption that I do not have Access Services 2013 as an option.
Failed Attempt #1: What I already tried was linking the lists to an Access 2013 database and did a Union query from Power Pivot which merged the data from the different data tables
as I wanted it to. Then I uploaded that Access Database to a document library on that same site, thinking that I could maintain the ability to leverage the "manage data refresh" feature but I was wrong.
Any thoughts or suggestions?
Thanks in advance for any help!
Cheers, Johnny
Johnny

You can connect to SharePoint Lists using Power Query (and of course Union multiple Lists and more using Pwer Query) - but Automatic refresh would not work with SharePoint. Power BI (Cloud service) allows auto refresh of Power Query, but not on SharePoint.
Hopefully some day soon.
Regards, Avi
www.powerpivotpro.com
Wiki:How to ask a Power Pivot Question to get a prompt, accurate and helpful response

SharePoint 2013 Parent/Child Form

All,
I am completing some audits on accounts with audit names: AuditA, AuditB
I have a SharePoint list 'AuditPopulation' with the following columns:
AccountNumber
AuditName
Then as we are auditing accounts we have audit questions based on the applicable audit. Therefore I have a list called 'AuditQuestions' with the columns:
QuestionID
Question
Answer (Pass/Fail)
AuditName
I am struggling with how to link to the two lists and create a form (most likely in InfoPath) that will display the list of Questions for AuditA when the user clicks the AccountNumber in the 'AuditPopulation' list.
Thank you in advance

You can use jQuery and Web Service to achieve this task using SharePoint Designer. Refer to the following post for more information
http://sharepoint.stackexchange.com/questions/6493/how-to-automatically-link-parent-in-child-list-new-form
http://go.limeleap.com/community/bid/246651/Creating-Forms-for-SharePoint-Using-SharePoint-Designer-2010
http://www.sharepointdrive.com/blog/how-to-establish-a-parent-child-relationship-in-sharepoint/
--Cheers

SharePoint 2013: Infopath browser form "get form from" option greyed out

In a web part page, I was able to add an app/list web part and an InfoPath web part, where the latter is setup with a "Get Form From" data connection with the former.
Now I was trying to do the same within the edit page of the tasks list, as I was aiming to allow the user to edit the item related to the task and to approve the task from the same page. I can add the two web parts. However, the "Get Form From"
data connection is not available in this case. What do I need to do to make it so?
Thanks.

Hi Ahmed,
Please go to task list page and click customize form, then publish it in the InfoPath form designer.
Now add a new page in SharePoint site, insert task list web part, then insert an InfoPath form web part. Click the triangle on the top right corner > Edit web part > Connections > Get form from, see if you could select task now.
Regards,
Rebecca Tu
TechNet Community Support

In Sharepoint browser enabled Infopath form Date & Date Time Pickers throws Script errors using https url.

HI All,
I am working in Sharepoint 2010 browser enabled Infopath form and is have two Infopath date picker controls. The form is working fine in normal "http://" url. while the same site we are using opening with "https://" and select the date
from picker then we got the script errors.
There are no scripts used in this site. It is by default sharepoint 2010 publishing site.
One more i checked with "Date Time picker" Infopath control also but same issue.
Below are the errors for reference:-
Any help is appreciated..!
Thanks.

Thanks Linda, for your quick response.
The Minimal
Download strategy feature is not available
in SharePoint 2010 and start.js file is also not available.
can you please suggest the exact location of "start.js"
file in SharePoint 2010 then i go further or please suggest other way to find or debug the process.

SharePoint 2013 RTE Custom Styles lost on Team Site Wiki Page after you select a control in the editor

I have a weird issue in that I have custom RTE styles working fine in publishing pages, but in the team site wiki page, when you first go into edit mode you see your styles, but if you highlight some text, select say the font drop down to expand it and then
select it again to contract it (i.e. without selecting a font), all of a sudden all of the custom styles are lost and everything reverts back to the default RTE styles.
In my master page I am running the following script to force my styles to be loaded.
ExecuteOrDelayUntilScriptLoaded(
function() {
     $(
"div[RteRedirect]").each(function()
varid = $(this).attr("RteRedirect"),
         editSettings = $(
"#"+ id);
if(editSettings.length > 0 &&
editSettings[0].PrefixStyleSheet != 'custom-rte')
             editSettings[0][
'PrefixStyleSheet'] =
'custom-rte';
             editSettings[0][
'StyleSheet'] =
'\u002f_layouts\u002f15\u002fFiveP\u002frteStyles.css';
             RTE.Canvas.fixRegion(id,
false);
"sp.ribbon.js");
See below screenshots (note Heading 2 is orange).
After you collapse the font menu, you see that the orange H2 has disappeared, and selecting the font drop down again now shows all of the default SharePoint RTE styles.
I haven't been able to capture the Event that is being called using the debugger. Any ideas how to fix this?
Alan Coulter.

Hi,
For this issue, I'm trying to involve someone familiar with this topic to further look at it.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

Create Sharepoint 2013/2010 Modal Forms for New Items, Multiple Lists

I have a main page with 4 buttons. Each button is linked to a different list. My question is: how can I make it so that when a user clicks on a button, the new item form pops up? And then, once submitted, the new item form closes and the user is once again
looking at just the mina page?
I have seen many suggestions on the web for multiple buttons with one list, but not any for multiple buttons for multiple lists.
I am relatively new to JQuery/coding, so if you have an answer please explain it in detail (think "Coding for Dummies," or some such format). I use a JQuery Doc. Library, and a Content Editor to reference to the specific JQuery I want to use.
That is about as far as I have gotten on this.
Any help would be greatly appreciated!

Hi Cameron,
I do have access to InfoPath. How would I do it through there? If it's easy and already designed within the program, I would much rather do that!
As for the link you gave me - would you mind explaining it to me? I clicked on it and read the blog, but I'm confused on these things:
1) How do I use the code to apply to 4 different lists, each attached to it's own button?
2) I have the buttons already put on the page - how do I connect the code to said buttons?
3) How would I make sure that each pop up closed upon form submission?
I really appreciate your help! Thank you!

Sharepoint 2013 pass custom form data

Similar Messages

Maybe you are looking for