Create view With Ref cursor data

Hi friends,
I want to create view as follows.
Example:
Create or replace v_name
select job,sal, <funcation>
from emp;
Note:- Function not having out parameter.
Function returning ref cursor values datatype.
Requirement:-
I want to create view even function returing ref cursor datatype.
Please advise how to create view.
Regards,
Kishore

user7284612 wrote:
Hi friends,
I want to create view as follows.
Example:
Create or replace v_name
select job,sal, <funcation>
from emp;
Note:- Function not having out parameter.
Function returning ref cursor values datatype.
Requirement:-
I want to create view even function returing ref cursor datatype.
Please advise how to create view.You perhaps are misunderstanding what a ref cursor is. It does not contain data like a table, so cannot be treated as one.
Take a read of this:
PL/SQL 101 : Understanding Ref Cursors

Similar Messages

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

PLS-00428 Why SELECT must be adorned with REF CURSOR to work?

hello
*"PLS-00428: an INTO clause is expected in this SELECT statement"* - This problem has been resolved. I just want to understand WHY SELECT statements need to be paired with REF CURSOR.
          To reproduce this,
               DECLARE
                    Id1 numeric(19,0);
                    Id2 numeric(19,0);
                    CreateTimestamp date;
               BEGIN
               -- ATTN: You'd either need to select into variable or open cursor!
               select * from SystemUser left join Person on Person.Id = SystemUser.PersonId WHERE Person.PrimaryEmail in ('[email protected]','[email protected]');
               END;
          Solution?
               * In install script:
                    CREATE OR REPLACE PACKAGE types
                    AS
                         TYPE cursorType IS REF CURSOR;
                    END;
               * Then in your query:
                    DECLARE
                         Id1 numeric(19,0);
                         Id2 numeric(19,0);
                         Result_cursor types.cursorType;
                    BEGIN
                    OPEN Result_cursor FOR select * from SystemUser left join Person on Person.Id = SystemUser.PersonId WHERE Person.PrimaryEmail in ('[email protected]','[email protected]');
                    END;
I Googled for reasonable explaination - closest is: http://www.tek-tips.com/viewthread.cfm?qid=1338078&page=34
That in oracle block or procedures are expected to do something and a simple SELECT is not!! (Very counter intuitive). What needs to be done is therefore to put the select output into a ref-cursor to fool oracle so that it thinks the procedure/block is actually doing something. Is this explanation right? Sounds more like an assertion than actually explaining...
Any suggestion please? Thanks!

Opening a cursor (ref cursor or otherwise) is not the same as executing a select statement.
A select statement returns data, so if you are using it inside PL/SQL code it has to return that data into something i.e. a local variable or structure. You can't just select without a place for the data to go.
Opening a cursor issues the query against the database and provides a pointer (the ref cursor), but at that point, no data has been retrieved. The pointer can then be used or passed to some other procedure or code etc. so that it may then fetch the data into a variable or structure as required.
It's not counter-intuitive at all. It's very intuitive.

Hyperion get ref cursor data

Hi,
Is there any way to execute stored procedure via hyperion using ODBC and get back ref cursor data.
I tried to call a stored procedure that have a ref cursor out parameter but it gives me error.
My stored procedure code is below.
wrong number or types of arguments to in call to 'HYP_CURSOR'
create or replace package hyp_ref_cusrsor is
type t_cusror is ref cursor;
end;
create or replace procedure hyp_cursor(ret1 out hyp_ref_cusrsor.t_cusror) is
begin
open ret1 for select * from hyp_tmp1 m;
end;
Hyperion version is 9.3.1
Oracle version is 10.0.2
Regards

George wrote:
Is there a limit to the volume of data a ref cursor can return via an Oracle Database Procedure call? No.
{thread:id=886365}
Re: OPEN cursor for large query
A ref cursor is a pointer to a compiled SQL statement, it has no rows so there is no limit to the number of rows that you can use it to fetch, just like there is no limit to the number of rows a select can return.
I am using a ref cursor to return data and testing using toad, it hangs the session. My Business Object report also hangs because of the large data volume 750,000 rows returned via a ref cursor. This is very confusing, it it hangs how do you know it returns 750,000 rows?

How to create Invoice with ref to PO

Dear sd gurus..
i know we can create invoice with ref to sales order not with po
But i want to create Invoice with ref to po only
please guide me
Thanks a lot

Venu, thanks for your reply.
So in this case your idea wont work but the main imp thing is we cant create invoice with ref to po
Please read my post once again, i never said we can create customer invoice with ref to Purchase order. I said very clearly, " you can follow the normal 3rd party sales process", which means we create customer invoice with ref to sales order only.
Coming into another query,
but some time PO Is generated 110 qth to vendor but vendor may be he will send 105 due to shortage ... and he will tell i will send the the remaining stock after next 10 days now Generally miro will happen only for 105 not 110 ( even we can do MIRO110 also ) but i am talking generally because he received the stock 105 only
But company wants billing for 110 not for 105 because here customer accepted to pay full money
and vendor gave promise to delivery 5 qty in next 10 days
Why will the customer agree to be billed the full qty, when he receive the partial qty?
Let us assume as you said customer agree to pay for full qty, then there are two options.
1. Do the MIRO for full qty since you would be invoicing the customer for full qty
Or
2. Do the MIRO for partial qty and customer should agree for partial invoice
Please note in the normal case also if there is if condition then you don't have other option.
Example:
Order = 100 qty
PO = 100 qty
MIGO = 50 qty and remaining 50 qty Vendor delivery in next 10 days
MIRO =50 qty
But here also customer agreed to pay for full qty, then what will you do ? you don't have other option but to bill the partial qty in standard.
And let me know if you need any more clarity?
thanks,
Srinu.

Create View with Force and No Force

Can Anyone Tell me how to create view with force and no force i have very little idea about this

This is the syntax.
CREATE [OR REPLACE] FORCE VIEW view
[(alias[, alias]...)]
AS subquery
[WITH CHECK OPTION [CONSTRAINT constraint]]
[WITH READ ONLY [CONSTRAINT constraint]];You can see interesting threads about this topic here.
Re: Creating view forcibly
Creating View forcefully
Cheers
Sarma.

Is it possible to create views with parameters ?

Hi,
As MS-Access, is it possible to create views with parameters ?
Ms-Access syntax : parameters [a] text; select * from table where code = [a]
If yes, can you give samples ?
Regards
Pascal

I suggest you you write a stored procedure that returns a recordset in oracle. Then execute the stored procedure and loop through the record set.
Look in in MS Knowledgebase searching on ADO Stored Proceedures for the VB/C++/VBS .. code.
Look in in Oracle PL/SQL guide for the Stored Proceedure code.

How I can create view with parameters?

I have very big query (2000 rows) and 2 parameters.
How I can create view with parameters?

If I use this small part of my query than I have error :
java.lang.NullPointerException
at oracle.javatools.db.ora.OracleSQLQueryBuilder.buildQuery(OracleSQLQueryBuilder.java:199)
at oracle.javatools.db.ora.OracleSQLQueryBuilder.buildQuery(OracleSQLQueryBuilder.java:147)
What does it means?
select
' Payroll ' as Revenue
, t.umonth, nvl(p.hmy, 0), nvl(t.sMTD, 0), nvl(a.inormalbalance, 0), nvl(T.sbudget, 0), nvl(a.scode, 0)
from
acct a, total t, property p, param par
where
nvl(t.hacct, 0) = nvl(a.hmy, 0)
and nvl(par.hretain, 0) <> nvl(a.hmy, 0)
and nvl(t.iBook, 0) = 0
and nvl(a.iacctType, 0) = 0 /*Regular accts*/
and nvl(t.hppty, 0) = nvl(p.hmy, 0)
and ( nvl(a.scode, 0) between 60000 and 6009000 )
union all ---------------------------------------------------------------------------------------------------------------------------------
select
' Payroll Taxes '
, t.umonth, nvl(p.hmy, 0), nvl(t.sMTD, 0), nvl(a.inormalbalance, 0), nvl(T.sbudget, 0), nvl(a.scode, 0)
from
acct a, total t, property p, param par
where
nvl(t.hacct, 0) = nvl(a.hmy, 0)
and nvl(par.hretain, 0) <> nvl(a.hmy, 0)
and nvl(t.iBook, 0) = 0
and nvl(a.iacctType, 0) = 0 /*Regular accts*/
and nvl(t.hppty, 0) = nvl(p.hmy, 0)
and
(nvl(a.scode, 0) between 60100 and 60690 )
union all -------------------------------------------------------------------------------------------------------------------------------
select
' Workers Comp/Disability '
, t.umonth, nvl(p.hmy, 0), nvl(t.sMTD, 0), nvl(a.inormalbalance, 0), nvl(T.sbudget, 0), nvl(a.scode, 0)
from
acct a, total t, property p, param par
where
nvl(t.hacct, 0) = nvl(a.hmy, 0)
and nvl(par.hretain, 0) <> nvl(a.hmy, 0)
and nvl(t.iBook, 0) = 0
and nvl(a.iacctType, 0) = 0 /*Regular accts*/
and nvl(t.hppty, 0) = nvl(p.hmy, 0)
and
( nvl(a.scode, 0) between 61200 and 61260)
union all -------------------------------------------------------------------------------------------------------------------------------
select
' Pension and Hospitalization '
, t.umonth, nvl(p.hmy, 0), nvl(t.sMTD, 0), nvl(a.inormalbalance, 0), nvl(T.sbudget, 0), nvl(a.scode, 0)
from
acct a, total t, property p, param par
where
nvl(t.hacct, 0) = nvl(a.hmy, 0)
and nvl(par.hretain, 0) <> nvl(a.hmy, 0)
and nvl(t.iBook, 0) = 0
and nvl(a.iacctType, 0) = 0 /*Regular accts*/
and nvl(t.hppty, 0) = nvl(p.hmy, 0)
and
( nvl(a.scode, 0) between 61000 and 61550 )
union all -------------------------------------------------------------------------------------------------------------------------------
select
' Other Labor Costs '
, t.umonth, nvl(p.hmy, 0), nvl(t.sMTD, 0), nvl(a.inormalbalance, 0), nvl(T.sbudget, 0), nvl(a.scode, 0)
from
acct a, total t, property p, param par
where
nvl(t.hacct, 0) = nvl(a.hmy, 0)
and nvl(par.hretain, 0) <> nvl(a.hmy, 0)
and nvl(t.iBook, 0) = 0
and nvl(a.iacctType, 0) = 0 /*Regular accts*/
and nvl(t.hppty, 0) = nvl(p.hmy, 0)
and
( nvl(a.scode, 0) between 616000 and 616400 )

Makes it possible to create view with parameters

makes it possibel to create view with paramater, example
create or replace view v_test(segment varchar2)
    select * from ref_user where segment = segmentThanks

thanks..
select count(distinct substr(a.svm_id,1,10)) jumlah " +
   " from daily_distribution_pop a, ref_toko b " +
   " where " +
   " substr(a.svm_id,1,10)=b.id and b.segment_type = 'A' and enable_flag='Y' " +
   " and a.tgl_visit between to_date('" + fromStartDate + "', 'dd/MM/yyyy') and to_date('" + fromEndDate + "', 'dd/MM/yyyy')
     and " + whereA + "= '" + whereB + "' " +
   " and substr(a.pom_id,1,2) = 'DP' and (a.qty_instore <> 0 or a.qty_delivered <> 0) ";
{code}
where fromStartDate, fromEndDate, whereA, whereB is variable parameter from asp.net.
how to i can implement with view

VC 7.0 Oracle stored procedures resultset with ref cursor

Can VC (we are on NW7 SP13) handle Oracle's datatype ref cursor - which is the standard solution in Oracle to return result sets - as the return value of a stored procedure?
When testing a data service in the VC story board based upon a simple Oracle function like:
create or replace package pkg_dev
is
   type t_cursor is ref cursor;
end;
create or replace function vc_stub return pkg_dev.t_cursor
as
l_cursor pkg_dev.t_cursor;
begin
open l_cursor for select ename from emp;
return l_cursor;
end;
(just as example - I know that could be easily retrieved using the BI JDBC connector framework and accessing tables / views)
I am always running in the "portal request failed ( Could not execute Stored Procedure)" error - so I am not able to use the "add fields" function to bind the output.
The defaulttrace contains entries like:
Text: com.sap.portal.vc.HTMLBRunTime
[EXCEPTION]
com.sapportals.connector.execution.ExecutionException: Could not execute stored procedure
Caused by: java.sql.SQLException: Invalid column type
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
We deployed Oracle's own jdbc-driver for Oracle 10g. Using that driver and a portal jdbc connector framework entry the stored procedures of the Oracle database user mapped to the portal user are discovered and available in the "Find Data Services" section.

We deployed the drivers as described in the HowTo Papers (e.g.Hwo to Configure UD Connect on the J2EE Server for JDBC Access to External Databases). When deploying the drivers you assign a freely definable name for the set of Oracle's jar-files (eg. oracle_10) as library name. Having deployed the drivers in that way only System Definitions via BI JDBC connector framework were working. With a little help from SAP Support (call lasted more than 2 months till a very capable member of the support team made things working in a very short time) we got the portal jdbc connection with Oracle's jar-files working:
Here are instructions how to add reference:
1. Connect to the j2ee using telnet, e.g in the cmd window type:
telnet <host> <port> + 8, enter uid and pwd of j2ee admin.
2. jump 0
3. add deploy
4. change_ref -m com.sapportals.connectors.database <your lib name>       <your lib name = oracle_10>
Trying to manually add this reference in visual admin connector container for JDBCFactory failed - reference could be added and saved, but then disappeared (at least in NW7 with SP12). Adding the reference as described above solved the problem.

ORA-01008 with ref cursor and dynamic sql

When I run the follwing procedure:
variable x refcursor
set autoprint on
begin
Crosstab.pivot(p_max_cols => 4,
   p_query => 'select job, count(*) cnt, deptno, row_number() over (partition by job order by deptno) rn from scott.emp group by job, deptno',
   p_anchor => Crosstab.array('JOB'),
   p_pivot => Crosstab.array('DEPTNO', 'CNT'),
   p_cursor => :x );
end;I get the following error:
^----------------
Statement Ignored
set autoprint on
begin
adsmgr.Crosstab.pivot(p_max_cols => 4,
p_query => 'select job, count(*) cnt, deptno, row_number() over (partition by
p_anchor => adsmgr.Crosstab.array('JOB'),
p_pivot => adsmgr.Crosstab.array('DEPTNO', 'CNT'),
p_cursor => :x );
end;
ORA-01008: not all variables bound
I am running this on a stored procedure as follows:
create or replace package Crosstab
as
    type refcursor is ref cursor;
    type array is table of varchar2(30);
    procedure pivot( p_max_cols       in number   default null,
                     p_max_cols_query in varchar2 default null,
                     p_query          in varchar2,
                     p_anchor         in array,
                     p_pivot          in array,
                     p_cursor in out refcursor );
end;
create or replace package body Crosstab
as
procedure pivot( p_max_cols          in number   default null,
                 p_max_cols_query in varchar2 default null,
                 p_query          in varchar2,
                 p_anchor         in array,
                 p_pivot          in array,
                 p_cursor in out refcursor )
as
    l_max_cols number;
    l_query    long;
    l_cnames   array;
begin
    -- figure out the number of columns we must support
    -- we either KNOW this or we have a query that can tell us
    if ( p_max_cols is not null )
    then
        l_max_cols := p_max_cols;
    elsif ( p_max_cols_query is not null )
    then
        execute immediate p_max_cols_query into l_max_cols;
    else
        RAISE_APPLICATION_ERROR(-20001, 'Cannot figure out max cols');
    end if;
    -- Now, construct the query that can answer the question for us...
    -- start with the C1, C2, ... CX columns:
    l_query := 'select ';
    for i in 1 .. p_anchor.count
    loop
        l_query := l_query || p_anchor(i) || ',';
    end loop;
    -- Now add in the C{x+1}... CN columns to be pivoted:
    -- the format is "max(decode(rn,1,C{X+1},null)) cx+1_1"
    for i in 1 .. l_max_cols
    loop
        for j in 1 .. p_pivot.count
        loop
            l_query := l_query ||
                'max(decode(rn,'||i||','||
                           p_pivot(j)||',null)) ' ||
                            p_pivot(j) || '_' || i || ',';
        end loop;
    end loop;
    -- Now just add in the original query
    l_query := rtrim(l_query,',')||' from ( '||p_query||') group by ';
    -- and then the group by columns...
    for i in 1 .. p_anchor.count
    loop
        l_query := l_query || p_anchor(i) || ',';
    end loop;
    l_query := rtrim(l_query,',');
    -- and return it
    execute immediate 'alter session set cursor_sharing=force';
    open p_cursor for l_query;
    execute immediate 'alter session set cursor_sharing=exact';
end;
end;
/I can see from the error message that it is ignoring the x declaration, I assume it is because it does not recognise the type refcursor from the procedure.
How do I get it to recognise this?
Thank you in advance

Thank you for your help
This is the version of Oracle I am running, so this may have something to do with that.
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
I found this on Ask Tom (http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3027089372477)
Hello, Tom.
I have one bind variable in a dynamic SQL expression.
When I open cursor for this sql, it gets me to ora-01008.
Please consider:
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.4.1 - Production
JServer Release 8.1.7.4.1 - Production
SQL> declare
2    type cur is ref cursor;
3    res cur;
4 begin
5    open res for
6    'select * from (select * from dual where :p = 1) connect by 1 = 1'
7    using 1;
8 end;
9 /
declare
ERROR at line 1:
ORA-01008: not all variables bound
ORA-06512: at line 5
SQL> declare
2    type cur is ref cursor;
3    res cur;
4 begin
5    open res for
6    'select * from (select * from dual where :p = 1) connect by 1 = 1'
7    using 1, 2;
8 end;
9 /
PL/SQL procedure successfully completed.
And if I run the same thing on 10g -- all goes conversely. The first part runs ok, and the second
part reports "ORA-01006: bind variable does not exist" (as it should be, I think). Remember, there
is ONE bind variable in sql, not two. Is it a bug in 8i?
What should we do to avoid this error running the same plsql program code on different Oracle
versions?
P.S. Thank you for your invaluable work on this site.
Followup   June 9, 2005 - 6pm US/Eastern:
what is the purpose of this query really?
but it would appear to be a bug in 8i (since it should need but one). You will have to work that
via support. I changed the type to tarray to see if the reserved word was causing a problem.
variable v_refcursor refcursor;
set autoprint on;
begin
     crosstab.pivot (p_max_cols => 4,
             p_query =>
               'SELECT job, COUNT (*) cnt, deptno, ' ||
               '       ROW_NUMBER () OVER ( ' ||
               '          PARTITION BY job ' ||
               '          ORDER BY deptno) rn ' ||
               'FROM   emp ' ||
               'GROUP BY job, deptno',
               p_anchor => crosstab.tarray ('JOB'),
               p_pivot => crosstab.tarray ('DEPTNO', 'CNT'),
               p_cursor => :v_refcursor);
end;
/Was going to use this package as a stored procedure in forms but I not sure it's going to work now.

Creating view with union, what to do if a table is missing?

Dear All,
I have three schema in one DB, 11gR1 is the database and Linux is OS.
Schema1
Schema2
Schema3
Each schema contains almost the same structure, but different data.
There are few tables that exists in one schema and may not exist in the other one.
In another schema, i am creating consolidated views using union command.
select * from schema1.table1
union
select * from schema2.table1
union
select * from schema2.table1
If table1 do not exists in schema2, the view gives error.
Is there any possibility that query somehow check if the table exists then select records otherwise skip? It has to be one query.
I hope i am able to deliver through words what I mean.
Your kind help is required on this.
Regards, Imran

So basically
you want to have one view for all the tables with same name in different schemas
and you don't want to check the existence of tables before creating the view.
In that case you can create a script to generate the views by selecting from dba_tables like below
select 'create or replace view v_'||table_name||' as select * from '||owner||'.'||table_name||' union bla bla bla' from dba_tables where table_name='table'
you will probably end up doing this with a cursor and you need to be carefull about union clauses in case there is no bla bla part
Coskan Gundogar
Blog: http://coskan.wordpress.com
Twitter: http://www.twitter.com/coskan
Linkedin: http://uk.linkedin.com/in/coskan
---------

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

64bit OraOLEDB failed when calling stored procedure with Ref Cursor

Hi everyone,
I used the ADO VB sample provided with the Oracle 10g provider installation.
But I compiled it in 64bit Visual Studio 2005 and ran on Windows 2003 x64 server.
The function call "cmd.Execute" when it is trying to call a stored procedure which has an Out Ref Cursor parameter. The exception is
"PLS-00306: wrong number or types arguments in call"
I already set the property "PLSQLRSet" to true. But it doesn't help.
The same code works if I compiled in 32 bit.
It also works if the stored procedure does not have Ref Cursor parameter.
I am guessing this is a bug in the 64bit Oracle provider. Anyone can confirm this please? or am I missing anything?
Wilson

It appears to work with 11.1.0.6.20 OLEDB provider but only for ExecuteNonQuery, I'm not able to work with Fill, and yes... in x86 works perfectly, but in x64 we are still having the ORA-06550 and PLS-00306 error.
Our Connection string is as follows:
"Provider=OraOLEDB.Oracle.1;OLEDB.NET=true;Password=xxxxx;Persist Security Info=True;User ID=exxxxx;Data Source=ECOR; PLSQLRSet=True"
We are not using ODP.NET.
Can you confirm that Fill method works with such update?

Cannot create view with parameter bindings

Hi, I'm trying to create this view in SQLPlus:
SELECT order_no, SUM(cut_qty),
SUM(received_qty)
FROM (
SELECT order_no, cut.dated, DECODE(cut.bimetallic, 'F', cut.quantity, cut.quantity/2) cut_qty,0 AS received_qty
FROM cut_shop_orders_dated cut
WHERE cut.dated BETWEEN TO_DATE('&date1','DD/MM/YYYY') AND TO_DATE('&date2','DD/MM/YYYY')
UNION
(SELECT order_no, rec.dated, 0, rec.quantity
FROM received_shop_orders_dated rec
WHERE rec.dated BETWEEN TO_DATE('&date3','DD/MM/YYYY') AND TO_DATE('&date4','DD/MM/YYYY')))
GROUP BY order_no
The problem is that sqlplus asks me for the parameter values and then creates it with these values as literal dates in the to_date function, those not asking for parameter values in runtime.
How can I create it using parameters with no values at design time?
Thanks.
Leandro.

if you want something like :
select * from emp $where_clause;
you can write a procedure with parameter and run it as dynamic sql for example
create or replace procedure pr1 ( p_where varchar2) is
begin
execute immediate 'create or replace view view_name as select * from emp '|| p_where;
end pr1;
/then run it on sql*plus
SQL> exec pr1('where deptno = 10');
make sure you give yourself "create any view" rights explicitly.
HTH
Ghulam

Create view With Ref cursor data

Similar Messages

Maybe you are looking for