Dynamic (session) language setting not working in external ITS v6.20

Hi everybody,
We have upgraded from ITS 2.0 to 6.20 patchlevel 35. In the service (srvc) file following parameters have been set;
~languages tr, en
~language tr
So we want our users to log on in Turkish (tr) language, but they have to be able to switch to English (en) after the logon.
This could be done in the 2.0 version without any problem using the appropriate querystring like
http://.../~flN0YXRlPTExNTguMDA0LjA0LjA0?~language=en
But it's not possible anymore in 6.20. I have checked the releates notes and forum posts, but still no solution. The intersting point is, we can switch the language at the logon page, but not after the logon page anymore. (following links work :
http://.../wgate/zabc/!?~language=en
http://.../wgate/zabc/!?~language=tr
Has anyone got an idea?
Best regards,
Ozcan.

Hello Ozcan,
That is not the correct usage of ~languages and ~language. The ~language parameter is used to specify the language for the service. There should not be a way to change it. The ~languages parameter should specify which languages the user is allowed to select from during logon. Obviously, if ~language is set then the ~languages parameter is of no use.
If it was possible to do what you have specified before then it was not intended.
Edgar

Similar Messages

Out of office replies in Exchange 2013 not working for external recipients

Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
DROP     ROUTING
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]}             Automatic reply: vacation test
FAIL     SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test

Hi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name                           DomainName
AllowedOOFType
Default                        *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType     : External
AutoReplyEnabled   : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Sun Access Manager 2005Q1 session failover is not working

Hi All
I m using Sun access manager 2005Q1,message queue 2005Q1, Sun Directory server 5.2 ,BerkelyDb 4.2.52 and radware hardware load balancer with sticky session.
I m have configured message queue and BerkeleyDB and both are running with any error.
I m using http://docs.sun.com/source/817-7644/ch5_scenarios.html#wp41008 doc for session failover.
Simple failover is working fine but the Session failover is not working.
Any body has done session failover with Sun Access manager 2005 Q1 I m trying to resolve this issue last two month.
Please it is urgent.

It works fine in 2005Q4, after applying a patch 120954 if I am not mistaken. But 2005Q4 and 2005Q1 are probably different in terms of session failover (site configuration etc.)
1. Stop both AM servers
2. Set logging to debug mode in AMConfig.properties.
3. Delete / move everything in /var/opt/SUNWam/debug
4. tail -f /var/opt/SUNWam/debug/amSession
5. Post that file here... you should be able to see if session failover is enabled etc....
hope this helps.

BI Administrator error: Session Management will not work

Hi!
I am about to set up BI Administrator Addon in SAP Portal. All the configuration steps seems to be ok.
Unfortunately when I try to start some of applications of BI Administrator I get the following error:
Session Management will not work.
Please check the DSM log file for details
Question:
How can I solve this problem?
Thank you very much!
regards

Hi
This error means--Please notify us of this problem by submitting an IT Service Request (Please Note: In order to log into the Infra system, you will need to preface your NKU account with nku\. For example, if your user name is smithj7, the "User Name" field would need to be populated with nku\smithj7.)
under the problem type "SAP BW/Portal.
Much of EP / BASIS issue.
Hope it helps

Touchpad and Keyboard not working (including external devices)

Hi,
I am using an rmbp with win7 and macosx.
Win7 on my bootcamp partition was working perfectly(4 months+) until now .I restarted my system and realized that the touchpad and keyboard are not working(inluding external mice/keyboard).I can boot into Macosx and the mouse and keyboard are working perfectly so its not a hardware problem.I havent set any restore points and have tried all the other recovery options (using f8 before booting) but to no avail
I have read some other solutions which involved opening the device manager but I cannot press anything when I login to windows.Does anybody have any idea except reinstalling windows? I would really appreciate any help !
Cheers

I have even loaded my Bootcamp partition in parallels ,in hopes of repairing the installation from there but Parallels give an error about mouse coherence and I cannot use my keyboard and mouse there .
Does anyone have any other idea except reinstalling windows ? .Thanks !

Some attachment buttons not working from external networks

Hi guys,
We have an eSourcing system that we access internally from server.internal.com . We also make this eSourcing system available to external vendors through www.external.com .
The external access is done using a Citrix AGEE system (reverse proxy, etc.). As part of this, the AGEE has the ability to change the hostname in the URL so the real server is hidden from external vendors. For example, when eSourcing generates a webpage, the AGEE searches through and replaces all http://server.internal.com references to http://www.external.com , and vice-versa for incoming calls.
This works for about 95% of the content, but there are a fer places where the links are not re-written correctly. One example is the File Attachment buttons when replying to a question. However, other file attachment buttons work correctly.
1. Does anyone else have a similar situation, using a Citrix or other product for external vendors?
2. Does anyone have a similar problem where certain links/buttons are not working from external networks?
3. Does anyone have any suggestions as to how to fix this problem?
4. Are there any settings that are specific to external access that may need to be set?
Thanks guys for any help/insight.
Michael.

SAP has re-written some of their code to help rectify the problem. We have also been working with Citrix to provide additional fixes. If anyone else has these problems, apply the latest patch of eSourcing and contact Citrix support to get the AGEE changes needed to make it work.
Michael

Purchase Order Goods Receipt quantity tolerance setting not working.

Team,
We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
The issue that I have is as follows:
Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the material master and also changed the message to a warning in OMCQ for message number M0722.
I had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
I have searched for OSS notes, however they mention that there is no solution.
Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
Thanks

Hello,
Please check the Tolerance levels in O588
Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
Best Regards,
R.Brahmankar

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Dynamic drill link is not working when i substitute some parameters in Plus

Hi Gurus,
Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
Thanks & Regards
Vikram

Hi Vikram
Oh gosh, me and my big mouth!
Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
Hope this helps
Regards
Michael

Command Sets not working on ACS 5.1

I'm running ACS 5-1-0-44-3.
I have everything running properly on ACS 5.1. I'd like to implement command sets for selected users and groups. Under Access Policies -> Device Admin-> Authorization I have Command Sets selected. The cisco provided is DenyAllCommands. I have this command set running on all groups and every groups is still able to issue any command they wish. I've also created a "show_only" command set that I've issued one group and they are still able to do conf t or any other command.
Am I missing something?
Do you need to reference the command set name under the shell profiles?
Its my understanding that all you have to do is reference it in "Authorization" in the rules under Device Admin.
I can understand a custom command set not working because of user error but DenyAllCommands should work.
Anyone have any ideas?
I have already re-patched the ACS
Stopped and started services.
And it seems like Command Sets is the only not referenced in the logs

I do it a lot
could you paste screnshot of your command set?
I've recently met another issue,
with my command set definition as below (as you can see its very simple):
almost every show is blocked (as suspected) but not "show run" (which is strange for me)

Dynamic browser language setting

Hi,
I need some information on internationalization.
Let me explain the issue..
In my application I need both English and Arabic views. It is possible to Change the language through internationalization.
But one more issue is there for Arabic language. I hope u all know that Arabic letters are from right to left. So I have to change the Browser Language settings also to Arabic..
But in my application it should be handled by an event. If u click Arabic button, you should get Arabic browsers and if English you should get English Browsers.
Can anyone help me on this dynamic browser language setting?
Thanks
AD

Hello Alex,
Did you follow Nibu`s instructions from here how to set languages for webdynpro object ?
final String locale = wdContext.currentContextElement().getLanguage_selection();
try
final String url = WDURLGenerator.getApplicationURL(
wdComponentAPI.getApplication().getDeployableObjectPart(),Collections.singletonMap("sap-locale", locale));
WDClientUser.forceLogoffClientUser(url);
catch (final WDURLException ex)
wdComponentAPI.getMessageManager().reportException(new WDNonFatalException(ex), false);
Best regards, Maksim Rashchynski.

How do I activate Acrobat XPro- I've installed CS6 Premium on my new computer and Acrobat does not work and says its not activated. How do I resolve this problem?????

How do I activate Acrobat XPro- I've installed CS6 Premium on my computer and Acrobat does not work and says its not activated. It is listed on the programs on the computer but will not respond. How do I fix this?????? Help Adobe?????

Hi t0m#2410,
How did you install Acrobat, did you install it as a part of Suite installation.
If it is a part of suite then deactivate suite uninstall Acrobat, Reinstall Acrobat using Suite media. Launch Photoshop first and Activate.
Then try launch Acrobat.
Regards,
Ajlan Huda.

IRR dynamic action filter does not work when condition set.

Hi All
I've set up a filter on an Interactive report using a dynamic action. The fiilter is used to display records that expire within a term ( example 30,60,90 days.) The dynamic action is set to fire On Change. This all works fine as long as I do not set the report condition to only display when P1_DAYS is not null.
I am using a report template that includes #REGION_STATIC_ID# as referenced in this post -
http://anthonyrayner.blogspot.com/2010/07/report-filtering-with-apex-40-dynamic.html
I hoped not to display a blank report region .. wait until after the user selects the "term" before displaying the results. Any workaround suggestions would be appreciated.
Version -
Application Express 4.0.1.00.03
Thanks
MO

Kindly check the following link for reference.
sample configuration link
http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01110.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70intf.html
Trouble shooting link
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html

How to make dynamic actions using Set Value work in all browsers?

I’m having a cross-browser incompatibility issue with dynamic actions using Set Value. The dynamic action works like a charm on Chrome but has no effect on either IE or Firefox. The code in oracle.apex.com and here are the credentials:
Workspace: DDBA
Username: [email protected]
Password: redtruck12
These code is on page 3 and here are the details:
There are two report lists (Standard and Special) and some of the reports require additional information supplied in either select lists or text boxes.
If the user selects a Standard report requiring a select list/text box, then the dynamic action sets the value of Special Reports to NULL (and vice-versa).
The dynamic action is to prevent a simultaneous selection of both the Standard and Special reports. To see how it works on Chrome, do this:
Run Page 3
Select the ‘Report for Search Criteria’ option from the Standard Report list. A ‘Search Criteria’ text box appears
Select the ‘Report by Release’ option from the Special Reports list. A select list appears and the ‘Search Criteria’ text box disappears.
If you do the same things on IE or Firefox, the text box does not disappear.

Hi,
Things are going wrong with setting the item values to NULL. If you check your session state, you'll see that in chrome your items values indeed will be set to null, but in firefox they won't.
Also I've noticed that you don't reset the other input fields, so their values persist in the session state. Since you submit your page every time you change one of the report select lists, this might lead to unexpected behaviour. Lastly, I've noticed you use a sql exists expression to manage the display/hide of your page items. A condition of type "Value of expression 1 = expression 2" causes less overhead as you don't need to switch to the db sql engine for every item to validate.
I'd suggest you rethink your specs and try to create:
- One dynamic action (since a value of standard select excludes the value of special select, and vice versa)
- Set the values for hidden items to null, also in session state
- Use a refresh of region as extra event in your dynamic action, instead of submitting your page for every change.
Regards,
Vincent
http://vincentdeelen.blogspot.com

One USB port does not work with external Disk or USB key

Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
Regards

Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result...

Dynamic (session) language setting not working in external ITS v6.20

Similar Messages

Maybe you are looking for