Create work order in 4.6C

Hi guys,
Have any of you seen any FMs for creating work orders in 4.6C?
Thanks
Mantas

Hello Mantas,
could you please check if the following BAPI can help fulfill your requirements.
BAPI_ALM_ORDER_MAINTAIN
I think that this what you are looking for.
Regards,
Isabelle

Similar Messages

Error while creating Work Order

Hello Experts,
I am getting below error while creating work order via add-on named beas but the error seems to coming from SBO.
Please advise.
Thanks
Deepak

Hi,
Plz check this thread:
What does this error mean?

Error creating work order for new notification - Related SyncBO not present

Hi,
We are working with MAM3.0 standard application.
We age getting an error while creating work order for a NEW notification.
In this scenario both notification and corresponding work order are also not created.
Here is the error for MAM30001 Sync BO in MEREP_MONI:_
Reading inbox record (mobile ID=0000001444, seq, no.=29, rcd_cntr=1, data=TOP0001000000
External format successfully converted to internal format: ldata=TOP0001000000000000000
Related SyncBO MAM30_010 with Sync key 0000000028 is not present on the device.
Return code 1 (DOWNLOADER)
   Here is the error for MAM30010 Sync BO in MEREP_MONI:_
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code from RFC BAPI Wrapper call:The order/network type is not defined
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code 0 (UPDATE MEREP_506-STATUS)
Can any body please tell me what is the sollutions for this error
your help in this regard is appreciable.
Regards,
Murthy

Hi Murthy,
II have no idea what patch level you are on. A while back we had similar issues with some clients. There are several patches around that area available. Perhaps you should have a look into patch 959732.
Hope that helps.
Regards,
Oliver

How can I make settlement rule mandatory in create work order (IW31)

How can I make settlement rule mandatory in create workorder and saving without release.
I kanow we can make settlement rule mandatory upon Release order but here requirement is
Create work order (IW21) save without releasing that time settlement rule should default.

Hi,
1.If you want the settlement rule default then maintain account assignment data in technical object and when MO is created on that it would be copied into the settlement rule...
2. If you want to make those fields mandatory .... plz check up field selections in config , if you cannot find those then use SHD0 Transaction variant to make those fields mandatory.
3. Enter SHD0 , Enter IW31 in transaction and ZIW31 for transaction variant ..click create option and this takes you to IW31 initial screen , here enter required values of technical object etc and press enter and this gives you IW31 Initial scree screen variant , click continue and this takes you to inside screen and here enter required field values and on pressing enter gives you screen variant .. so you need to enter field values and check the flow of screen variants and on getting settlement rule screen variant select required option for the fields you need.
4. Finally you can save that in package created in SE80 for transporting to other client .., you can activate the variant in SHD0 -->Standard variants -->you can find activate option ..
regrds
pushpa

Create work order on 4.6C FM

Hey guys,
Just wondering if any of you have seen a function module for creating work orders in 4.6C?
Thanks
Mantas

Hi,
Do you mean PM work order?
In that case BAPI_ALM_ORDER_MAINTAIN
Regards

How to create Work Order in CMRO

Dear All,
We are new to using Oracle CMRO and because of unavailability of CMRO resources, we are facing quite a few problems while working on CMRO. Can anyone please help me out how can I create Work Order using CMRO.
If anyone can provide me with Oracle CMRO White Papers, I will be very thankful.
Regards,
Zulfiqar Ali Mughal

Hi,
There are 3 ways to create work order in oracle cMRO.
1) Through Maintenance Requirement and associated to visit and push to production.
2) Non-routine.
3) Unassociated Task.
1.     Create Work Order From Maintenance Requirement:- In order create work order first of all we need to define an MR in Engineering > Fleet Maintenance Program > Overview > Create. After creating the MR Header at least one route should be associated (Route can be created from Engineering > Route >Overview > Create and the status should be "complete"). Then MR effectivity (means which item or unit MR is applicable) need to be defined and in turn the interval threshold also need to define. Once the MR is completed from the Planning window associate the MR to a visit and push to Production. In case of Planned MRs run the Build Unit Effectivities and view the due date from the Planning> Unit Maintenance Plan screen and associate to a Visit in Planning and push the visit to production. In case of Unplanned MRs create visit, associate unplanned MR, push to production.Work Orders would have generated and visible in Execution >Production Planning > Work Orders.
2.     Create Non-Routine:- Non- Routines can be created from Execution and Planning
a.Create Non-Routine work order from Execution:- Select the Routine work order and select Create Non-Routine work order from the pull down menu, furnish the details like severity, urgency, summary etc. and click on (B) Apply.
b.Non-Routine from Planning: Create NR from Planning >Unit Maintenance Plan> Non-Routines (B)Create and then associate to a visit and push to production.
3.     Unassociated Task:-This is for executing the miscellaneous operations to be done as part of already created visit. Navigate the visit task screen in an already created visit (Navigation: Planning > Visit Work Package > Overview > Search the visit > Click on the visit hyperlink> view visit task in side Menu), From the drop down menu select the “ Create Unassociated Task” and click (B) Go. Furnish the details in the Task header and click on (B) Apply and (B) Cancel, you would be navigate back to the “Visit Task” Screen. Select the unassociated task and push to production. Unassociated work orders would have created. You can create Unassociated task any time during the execution, before closing of visit.

Create Work Order Using BAPI in LSMW

Hi All,
I searched in SCN but i dint get the correct idea to create Work Order USING BAPI,
Im trying to create Work Order Using BAPI in LSWM
Can any one Give me Brief Idea to create Work Order(Either Component or Operations) (t code - IW31) using BAPI in LSMW
Regards
Smitha

Hi All,
I searched in SCN but i dint get the correct idea to create Work Order USING BAPI,
Im trying to create Work Order Using BAPI in LSWM
Can any one Give me Brief Idea to create Work Order(Either Component or Operations) (t code - IW31) using BAPI in LSMW
Regards
Smitha

Error while creating work order from purchase order

Dear All,
We are having a subcontracting scenario where we are creating a Work order from PO but getting the below error.
Error - "No master data assigned to partners-locations-product combination."
Done all the setting mentioned in the below thread but the error still persist.
Error in Generating Work order from Purchase Order
Any suggestions on which master data we need to check?
Thanks,
mahesh.

Hi Mahesh
In the below transaction
/SCA/MFGCFG - Work Order Configuration
Can you maintain Master data Assigment properly
Valid From
Valid To
Active---Checked
Can you please list what you maintained
Regards
Vinod

Authorization check creating Work Orders (IW31)

Hello everyone,
We need to make an authorization check when creating a Work Order in transaction IW31.
That check is based on the field "Main work center for maintenance tasks"
No check apart from the plant associated to the work center is done, but the problem is that there exist different Work Centers associated to the same plant, and we need to restrict it.
Our authorization model considers the Cost Center associated to the Work Center, but the Cost Center is not checked in this IW31 when entering the Work Center.
We have also tried using the classification system, but despite activating authorization obejct C_KLAH_BKL, is neither checked.
(It is amazing the difference between the number of objects marked to be checked in SU24 for this IW31 and the objects really checked when looking at authorizations trace)
We know that Work Center field exit could be used, but we would prefer not to change ABAP code.
Could you please give us a hint about how we can restrict this field?
Thank you very much.
Best regards.
Jose Sanz.

Hi Jose,
You can look at the object C_ARPL_WRK,
if you work with this , i hope you would be able to find a solution for this situation.
Thanks,
Vijay

Standard IDOC/BAPI to create work order in CRM from ECC PS

Hello Guys,
Any input on any standard IDOC/BAPI I could use to create a work order in SAP CRM based on the data feed from SAP ECC (Project systems)?
Any help on this would be really appreciated.

Hii.
Did u get answer of SAP-> XI->CRM. IF so, share wid us.
I m stuck in same kinda scenario

How to create work order in a manufacturing system

Hi,
I am using EBS 11i. I have applied APS pack on it. I want to create a work order. Can anyone brief me on which responsibility to choose in order to create a work order.
Also if someone can suggest some documents will be of great help.
Thank You,
Niranjan.

Hi Niranjan,
Work orders of different kinds can be created via different modules, but the primary one for Discrete Manufacturing environments is Work In Process (WIP) where the navigation would be:
Discrete > Discrete Jobs
Note that the User's Guide for WIP will give you an good overview. In addtion to that you might find Bills Of Materials relevant for setting up your product structures i.e. Bills of Materials and Routings (Operations and Resources). Inventory details the item definitions and inventory structures and finally Costing if you have detailed requirements in that aspect.
/Niels LM

BAPI or FM to create Work Order with reference to Notification (IW34)

Hi Experts,
Can you please let me know a BAPI or FM to create a Work Order with reference to Notification(just want to replicate IW34)?
I tried using BAPI_ALM_ORDER_MAINTAIN but it is creating another new notification in addition to the notification I passed in Object list.
Thanks in Advance.
-Chandra

Hi,
try FM BAPI_SALESORDER_CREATEFROMDAT2
with ORDER_HEADER_IN fields
REFOBJTYPE
REFOBJKEY
REFDOCTYPE
Regards,
Clemens

Steps to create Work Order

Hi,
Could you tell about What is work order creations & steps to create.
Not sure if below steps are right.
work order process -->to create work oder---> work request ----> bom ----> routing -->
Thanks

Hi,
you can visit the following links.
http://oracleappscommunity.com/oracle/blog/365/discrete-job-creation/
http://oracleappscommunity.com/oracle/blog/38/oracle-work-in-process-overview/
http://www.youtube.com/watch?v=k6XjVjoLgmo
http://egeapp.egeseramik.com:8000/pls/prod/fndgfm/fnd_help.get/US/eam/@SelfService1010562
HTH
Sanjay

Creating work order

How to create a service order or work order using a BAPI ??

Hi,
Welcome To SDN!!
Have you seen function modules BAPI_ALM_ORDER_CREATE and BAPI_ALM_ORDER_MAINTAIN ?
Regards
Kiran Sure

Cannot create work order number ranges

Hi Gurus,
I am working on ECC->XI->SNC systems. I want to maintain work order number ranges in SNC but I am encountering an error or "User is not assigned to a suitable business partner" and also there is no Append Row button to define work order number ranges. Can you please help me configure the user properly? Also, how will the Append Row button appear in SNC? I would appreaciate if you can also provide reference materials on this. Thanks.

Hi,
You are getting this error "User is not assigned to a suitable business partner" because the user through which you've logged in is not assigned to any Business Partner of type "Organisation".
If it it is an internet user, you should assign it to your plant (if he is on the customer side) or Vendor.
The relationship to be maintained it "Is SNC User of".
Regards,
Sandeep

Create work order in 4.6C

Similar Messages

Maybe you are looking for